Air Nozzles

• • Recommendation

  

  Flat Air Nozzle Standard Type, ABS Resin

  MISUMI

  Standard Type of Resin Air Nozzle

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	225,662 IDR
  Days to Ship:	Same day

• 

  Spray Nozzles, Circular Spray Pattern - Standard

  MISUMI

  ◆Features: A metal air nozzle that sprays powerful straight air from the hole at the tip.
  ◆Applications: Can be used in high-temperature environments such as removing oil, water droplets, and chips, cooling/drying, and blowing into narrow spaces.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	392,039 IDR-
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Flat Air Nozzle Standard Type, Metal, Machined

  MISUMI

  Standard Type of Metal Air Nozzle

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	1,529,906 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Air Nozzles - Economy Type

  MISUMI

  ◆Features: A simple and inexpensive metal (SUS304) air nozzle.
  [NZAK] has a narrow injection port and the gas spreads out in a fan shape along the slit.
  [NZAL] has a wide injection port and sprays air at a wide angle.
  ◆Applications:
  [NZAK] Steam humidification, drying, air blowing, etc.
  [NZAL] Dustproofing, air blowing, etc.
  ◆Air source: Compressor◆Injection shape: Fan-shaped
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	175,939 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Point Nozzles - Compact

  MISUMI

  Compact Nozzles adjustable to any angle.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	439,848 IDR-
  Days to Ship:	10 Day(s) or more

• 

  High Flow Rate Blower Nozzles

  MISUMI

  Air Nozzles capable of efficiently blowing air from blowers

  CAD ：

  2D / 3D

  Standard Price:	117,960 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Flat Air Nozzles - Compact Type (Plastic)

  MISUMI

  ◆Features: A compact resin air nozzle with a total length of 30 mm and a nozzle width of 33 mm.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	210,362 IDR
  Days to Ship:	Same day

• • On Sale Till 31/03/2025

  

  Conical Spray Air Nozzles

  MISUMI

  Air Nozzles enabling air blow in a conical form.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	344,229 IDR
  	Special Price
  Days to Ship:	Same day or more

• 

  Point Nozzles

  MISUMI

  ◆Features: Point nozzle that can be adjusted at any angle by tightening the hexagonal nut.
  ◆Air source: Compressor◆Injection shape: Point

  CAD ：

  2D / 3D

  Standard Price:	512,519 IDR-
  Days to Ship:	Same day or more

• 

  Flat Air Nozzles - Wide Type

  MISUMI

  ◆Features: A wide resin air nozzle with a nozzle width of 108mm. The jet nozzle width is approximately twice that of the standard type (AFTSP), making it ideal when you want to reduce the number of parts.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	439,848 IDR
  Days to Ship:	Same day

• 

  Rotary Nozzles - Short

  MISUMI

  "Are intended to blow the air by rotating themselves and thus, can blow the air more strongly than standard nozzles."

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	397,905 IDR-
  Days to Ship:	Same day or more

• 

  [Clean & Pack]Nozzles with Swaged Sleeve Fitting

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■ Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  ◆Features: A SUS304 nozzle that can be connected directly to a pipe and is recommended for pinpoint blowing.
      By mounting it to the tip of the copper pipe, the air efficiency can be improved compared to when using only the copper pipe.
      The tip shape is selectable from slit (SKNF) and single hole (SKNS).
  
  ◆ Air Source: Compressor ◆ Injection Configuration: Point
  ◆ Max. Operating Pressure: 0.7 MPa ◆ Heat Resistant Temperature: 200°C
  
  ◆See here for Technical Data (SKNF)
  ◆See here for Technical Data (SKNS)
  
  
  

  • Volume Discount

  Standard Price:	259,807 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Air Blow Nozzles - Copper Pipes for Air Blow

  MISUMI

  ◆Features: Male thread type (straight or with orifice at the end) and female thread type (straight) are available.
      The materials of the pipes are annealed copper tube (C1220T-0) and copper tube (C1220T).

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Air Nozzles - De Laval Type

  MISUMI

  ◆Features: This air nozzle is capable of blowing at sonic speeds due to its special internal structure.
      A metal air nozzle with powerful ejection force by blowing at the speed of sound.
      Materials include A5052 and SUS303.
  
  ◆Air source: Compressor◆Injection shape: Point
  ◆Maximum working pressure: 0.7MPa◆Heat-resistant temperature: 200℃

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	535,467 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pata Gun SPG Series

  DAIKOKENNETU

  Ultimate air gun. Perfect for draining, dust removal, oil cut, etc.
  

  Standard Price:	2,698,395 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Air Blow Nozzle. Male/Female Thread, Knurling, Terminal Block, Non-Annealed

  MISUMI

  ◆Features: You can choose from male thread (annealed or non-annealed), female thread (annealed or non-annealed), knurled iris (annealed), or terminal block (annealed).
  
   *Annealed pipes with an outer diameter of 1.0 to 3.0 can be bent by hand. (Outer diameter 4.0 or more is not allowed)
   The minimum bending radius is outer diameter x 3, and please bend carefully to avoid applying stress to the brazed part.
  
  ◆Air source: Compressor◆Injection shape: Point◆Material: SUS304
  From August 2021, we will be adding nominal size standards.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Rotary Nozzles - Long

  MISUMI

  ◆ Features: Suitable for blowing into cylindrical workpieces.
  Rotates while blowing air, producing more powerful air flow than normal.
      The tip shape can be selected from narrow angle, wide angle, side, or wide angle + side.
      *For the short type, select from [SPNZ].
  ◆ Air Source: Compressor ◆ Heat Resistant Temperature: 60°C.
  
  ◆ For Technical Data, see here.
  ◆ Free sample rental available here
  
  
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	994,439 IDR
  Days to Ship:	8 Day(s) or more

• 

  Spray Nozzles/Round Type

  MISUMI

  ◆Features: A resin (PP) air nozzle that injects powerful straight air from the hole at the tip.
  ◆Applications: Can be used in high-temperature environments, such as removing oil, water droplets, and chips, cooling, drying, and blowing into narrow spaces.
  ◆Air source: Compressor
  ◆Maximum working pressure: 0.7MPa◆Heat-resistant temperature: 70℃

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	12,552 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Spray Nozzles, Circular Spray Pattern - Air Amplified Type

  MISUMI

  Amplify Type of Air Nozzle intended to suck in the surrounding air and to blow it

  CAD ：

  2D / 3D

  Standard Price:	138,028 IDR
  Days to Ship:	8 Day(s) or more

• 

  Flat Air Nozzle Standard Type, Metal, Casting

  MISUMI

  ◆ Features: SUS304 (cast) air nozzle with flat mounting angle.
  41% more cost-effective than conventional SUS flat nozzles produced by machining, thanks to a revised manufacturing method.
  *Select [AFTSP/AFTSF] for a resin version, or [AFTSA/AFTSS] for an all-machined, non-cast version.
  
  ◆ Applications: For various applications including removal of oil, water droplets, and debris; cooling/drying; air curtains, etc.
  ◆ Air Source: Compressor ◆ Injection Configuration: Straight
  ◆ Max. Operating Pressure: 0.4 MPa ◆ Heat Resistant Temperature: 200°C
  
  ◆ For Technical Data, see here.
  ◆ Free sample rental available here
  
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	1,702,020 IDR
  Days to Ship:	8 Day(s) or more

• 

  Air Amplifying Nozzle, TAIFUJet Series (Compressor Specifications, Flat Type, Resin-Made)

  IKEUCHI

  A unique flat design for a more even injection of air. Made from PPS with excellent heat and chemical resistance.
  A low-noise product for use in work environments.
  
  [Features]
  · TAIFUJet series products have a novel structure that traps the surrounding air and then powerfully blows the amplified air. · A unique design with an even and strong injection force, and with excellent low-noise and straight injection performance.
  · Energy saving (volume of amplified air) and with a powerful impact performance: TAIFUJet features a unique design that traps and amplifies the surrounding air. Powerful air injection, even with low air consumption.
  · Low-noise design: TAIFUJet, in addition to featuring a work environment-friendly and low-noise design, is available in flat and round types to fit the application.
  · Evenness: TAIFUJet features a unique design that injects air more evenly. By phasing the top and bottom injection ports and air suction holes, an even spray across the entire spray width can be obtained. Attenuation of the impact force as distance increases is small, allowing for the air blower to operate more efficiently.

  • STOCK

  CAD ：

  2D

  Standard Price:	394,188 IDR
  Days to Ship:	12 Day(s)

• • On Sale Till 31/03/2025

  

  Vacuum Flow ZH□-□□-X185 Series

  SMC

  Vacuum Flow ZH□-□□-X185 Series with high flow rate and vacuum.
  [Features]
  · The blow air flow rate generated is 4 times the supply air.
  · The vacuum air flow rate generated is 3 times the supply air.
  · Large passage diameter available for suction of machining chips, particles, etc.
  [Applications]
  · Blow: used for scattering water droplets / blowing chips
  · Vacuum: used for sucking up solder smoke / transporting materials such as pellets.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Radial Air Nozzles

  MISUMI

  "Air Nozzles enabling air blow in a radial form. For the injection direction, either of three patterns is selectable."

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	286,857 IDR
  Days to Ship:	8 Day(s) or more

• 

  Insert Nozzle TJ Type

  NABEYA

  Screw-in type nozzle. It can stably lean 35° forward or back, left or right.
  
  [Features]
  · The nozzle on the taper face can be inclined by 35° back and forth and around so you can apply it properly.

  CAD ：

  2D

  Standard Price:	436,414 IDR-
  Days to Ship:	Same day or more

• 

  Air Blow Nozzle Male/Female Thread, Height Adjustment, Strut Clamp Mounting, Duplex Male Thread, Barbed Fitting, Hose Nipple

  MISUMI

  ◆Features: Male/female thread type, height adjustment male/female thread type, post clamp mounting type, 2-core male thread type,     Barb joint type, hose nipple type You can choose from.
      *Pipe with an outer diameter of 1.0 to 3.0 can be bent by hand. (Outside diameter 4.0 or more is not possible)
      Please bend carefully, using the outside diameter x 3 as a guideline for the minimum bending radius.
  ◆Air source: Compressor◆Injection shape: Point◆Material: SUS304
  Nominal size standards will be added from August 2021.
  (*ABNZSL2-8.0 and ABNZS2-8.0 are scheduled to be released on September 20, 2021.)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Air Blow Nozzles - Pipe Nozzles

  MISUMI

  ◆Features: Straight type, male thread type, and female thread type are available.
      *When using male or female thread types, we recommend using a nozzle joint to blow at the desired angle.

  CAD ：

  2D / 3D

  Days to Ship:	17 Day(s) or more

• • On Sale Till 31/03/2025

  

  Nozzle Joints

  MISUMI

  ◆Features: A flexible metal joint that can be fixed in any position.
      Loosen the cap, move the ball and tighten it to fix it in any position.
      The adjustable angle range is 50°. Can be used for both air and liquid.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	831,887 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  90 degree air nozzle Compact type Resin type

  MISUMI

  ◆Features: Compact air nozzle made of ABS resin with a total length of approximately 25 mm and an installation angle of 90 degrees.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	286,857 IDR
  Days to Ship:	Same day

• 

  Flat Air Nozzles - For Blowers

  MISUMI

  ◆Features: A flat air nozzle made of metal (A5052P) suitable for high-flow air blowing using a blower.
      By using a blower as the air source, you can save on electricity and air.
      This nozzle is suitable for continuous jetting over long periods of time.
  
  ◆Air source: Blower◆Injection shape: Straight
  ◆Maximum working pressure: 0.7MPa◆Heat-resistant temperature: 200℃

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	1,573,891 IDR
  Days to Ship:	8 Day(s) or more

• 

  Air Blow Nozzles - Unit Type

  MISUMI

  ◆ Features: A preassembled coupling, copper pipe, and tip nozzle unit. Eliminates the need to assemble parts separately.
      Can be bent to any angle. Reduces the hassle of managing different parts.
      Point (DYPN), Slit (DYPNB), and Cross-Shaped (DYPNC) tips can be selected.
      Length selectable in 10 mm increments between 150 and 350 mm. Tube available in three colors: blue, black and red.
  ◆ Air Source: Compressor
  ◆ Material: Main body (copper pipe), tube (nylon), tip nozzle / fitting (brass)
  
  ◆ For Technical Data, see here.
  ◆ Free sample rental available here
  ◆ For Application Examples, see here.
  
  
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  [Clean & Pack]Flat Air Nozzles - Standard, Metal, Casting

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■ Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  ◆ Features: SUS304 (cast) air nozzle with flat mounting angle.
  ◆ Applications: For various applications including removal of oil, water droplets, and debris; cooling/drying; air curtains, etc.
  ◆ Air Source: Compressor ◆ Injection Configuration: Straight
  ◆ Max. Operating Pressure: 0.4 MPa ◆ Heat Resistant Temperature: 200°C
  
  ◆ For Technical Data, see here.
  
  
  

  • Volume Discount

  Standard Price:	1,331,190 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Air Blow Nozzles - Nozzles with Attachment Plate - 1-Hole Type, 2-Hole Type

  MISUMI

  ◆Features: A product that can be used by directly inserting a tube with an inner diameter of φ2.5.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Nozzles for Pipe Washing

  MISUMI

  ◆Features: Nozzle suitable for pipe cleaning.
  ◆Application: Use when blowing the outer circumference of cylindrical workpieces (pipes, etc.).
  ◆Air source: Compressor◆Material: A6063

  CAD ：

  2D / 3D

  Standard Price:	835,711 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Terminals for Nozzles - Clamp Type

  MISUMI

  A terminal that can be directly attached to the nozzle.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	143,429 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pipe Nozzles/Steel Pipes for Air Nozzles

  MISUMI

  [Features]·This shaved steel pipe can be fitted with a nozzle.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Slit Steel Pipe Nozzles

  MISUMI

  ◆Features: A simple nozzle with a slit in the copper tube. Suitable for use when the distance to the target is close.
  ◆Precautions for use
  Actual jet width, collision force, etc. may vary. Also, the slit width may widen depending on air pressure, etc.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Point Nozzles - Reverse Flow Prevention

  MISUMI

  Point Nozzles with Built-in Check Valve Mechanism.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	497,219 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Flat Air Nozzles - Air Amplify Compact Type

  MISUMI

  Compact Amplify Type of Air Nozzle with 35mm of Overall Length

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	248,610 IDR
  Days to Ship:	8 Day(s) or more

• 

  Flow Rate Control Nozzles

  MISUMI

  Air Nozzles which allow for adjustment of the flow rate.

  CAD ：

  2D / 3D

  Standard Price:	315,097 IDR
  Days to Ship:	8 Day(s) or more

• 

  [Clean & Pack]Flow Rate Control Nozzle

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■ Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  ◆Features: The flow rate can be adjusted without using a speed controller.
      This product has lock mechanism to fix at arbitrary positions.
  
  ◆ Air Source: Compressor ◆ Injection Configuration: Point
  ◆Heat Resistant Temperature: 60°C
  
  ◆ For Technical Data, see here.
  ◆See here for product video
  
  
  

  • Volume Discount

  Standard Price:	372,990 IDR
  Days to Ship:	10 Day(s) or more

• 

  Insert Nozzle JT Type (Mounting Parts Angle Type)

  NABEYA

  Screw-in type nozzle. Mounting element for copper tube nozzles. Angled type. The angle can be changed by 90 degrees.　

  Standard Price:	288,656 IDR
  Days to Ship:	12 Day(s) or more

• 

  Insert Nozzle SB Type

  NABEYA

  Press Fit Nozzle. Compact and suitable for embedding in machinery or fixtures. The edged tool does not interfere with fixtures.　
  
  [Features]
  · Can be embedded in machines or jigs so as not to interfere with blades or jigs.
  · The nozzle angle can be speedily changed

  Standard Price:	404,469 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Insert Nozzle SB Type Tube

  NABEYA

  The total length of the tube can be shortened or the tube can be bent.　
  
  [Features]
  · Suitable for mounting to nozzle tips with a SB type, TJ type, or JB type screw part.
  · The total length of the tube can be shortened or the tube can be bent

  CAD ：

  2D

  Standard Price:	189,929 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Insert Nozzle Spray Tip

  NABEYA

  Nozzle tip which allows a nozzle tip to be used for screw types.
  
  [Features]
  · Nozzle tip can be mounted to a screw-based SB type, TJ type, or JB type

  CAD ：

  2D

  Standard Price:	298,960 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Insert Nozzle PJ Type

  NABEYA

  Screw-in type nozzle. It is compact and can be embedded in machinery or fixtures. The edged tool does not interfere with fixtures.　
  
  [Features]
  · Can be embedded to machines or jigs, without interfering with blades or jigs.
  · The nozzle angle can be quickly changed

  CAD ：

  2D

  Standard Price:	647,743 IDR-
  Days to Ship:	8 Day(s) or more

Loading...