Conveyer Rollers

• 

  Conveyor Rollers-Metal/Steel

  MISUMI

  Roller for metal conveyor with bearing. Materials can be selected from steel, aluminum alloy, and stainless steel (SUS304).

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  MDR Brushless Standard Motor PM500FE

  ITOUDENKI

  Pipe diameter ⌀50 roller.
  [Features]
  ·Energy saving power consumption 60+α.
  ·Run-on-demand transport that drives only the parts that are needed when needed reduces power consumption by up to 60% compared to the drive method that uses a single external AC motor.
  ·Achieves high torque and high speed transfer.
  ·Creating a safe and comfortable space. The power supply is a 24 V DC safe low-voltage power supply that does not pose a risk of electric shock.
  ·Excellent controllability (speed control, stopping accuracy, constant speed transport).
  ·Achieved programless operation without PLC.
  ·connection with network systems.
  ·Significant reduction in total cost. Reduce power consumption with energy-saving transportation and airless.

  Standard Price:	3,610,118 IDR-
  Days to Ship:	19 Day(s) or more

• 

  Motor Rollers-Built in Motor

  MISUMI

  Unlike regular rollers, this conveyor roller has a built-in motor and reducer. Since there is no need to provide a separate motor space, it helps save space in automatic conveyance equipment.

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Conveyor Rollers - Shaft & Roller Sets

  MISUMI

  This is a set of conveyor rollers and shafts. The pipe shaft and pins required for installation are included as a set, reducing the hassle of arranging parts.
  The conveyor rollers, pipe shafts, and pins are all made of steel, and the surface treatment is trivalent chromate.
  For roller strength, please refer to the specification table.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	141,517 IDR-
  Days to Ship:	Same day or more

• 

  Roller with Sprocket

  MISUMI

  Conveyor roller with sprocket. The material of the roller is steel, and the material of the sprocket is S45C.
  The number of sprocket teeth is 10, and the compatible chain is CHE40. The length of the roller part can be selected from 100, 200, 300, 400, and 500. Manufacturer recommended axis: Φ11.9 (+0,-0.1)

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Roller with Axel (Steel)

  TRUSCO NAKAYAMA

  [Features]
  ● This is a roller that can be installed as a roller replacement for conveyors of different manufacturers by adjusting the included collar.
  The 38 mm roller is for light loads, 57 mm for moderate loads, and 60.5 mm for moderate loads.

  • STOCK

  Standard Price:	170,923 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Miniature Rollers for Conveyors

  MISUMI

  Conveyor roller with bearing. You can choose from two types of material: steel or stainless steel.
  For steel type, surface treatment can be selected from trivalent chromate or hard chrome plating.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	93,707 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Roller with Shaft (Stainless Steel)

  TRUSCO NAKAYAMA

  [Features]
  - This is a roller that can be installed as a roller replacement for conveyors of different manufacturers by adjusting the included collar.
  The 38 mm roller is for light loads and 60.5 mm for moderate loads, all-stainless steel rollers. Water and chemical resistant.

  Standard Price:	721,600 IDR-
  Days to Ship:	Quote

• 

  Conveyor Roller Shafts

  MISUMI

  conveyor roller shaft that is compatible with MISUMI's conveyor rollers and conveyor mini rollers. (Excluding HROB and HROBU.)
  
  [Type] Roller shaft
  [Material] Steel (equivalent to S45C), stainless steel (SUS304)
  [Surface treatment] Steel: No surface treatment, 4 Iron trioxide film/electroless nickel plating
  [Shaft end shape] Available in 4 types, and length can be specified in 1 mm increments from 60 to 550.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Steel Roller Unit (Conveyor Roller), Diameter ø60.5 × Width 90-990 (MR Model)

  OKURA

  Heavy duty steel roller. Transport distance and roller width can be specified within the range of 90 - 990 mm.

  Standard Price:	242,887 IDR-
  Days to Ship:	11 Day(s) or more

• 

  AC Taper Roller, PMT Series

  ITOUDENKI

  Tapered, Small Diameter, ø42.7 Inner Roller Radius, 900-mm Line

  Standard Price:	4,647,277 IDR
  Days to Ship:	71 Day(s) or more

• 

  MDR Brushless Standard Motor PM605FE

  ITOUDENKI

  [Features]·Pipe diameter ø60.5 roller. ·Thickness is t3.2.

  Standard Price:	3,764,919 IDR-
  Days to Ship:	22 Day(s) or more

• 

  Conveyor Rollers-Urethane Lined Type

  MISUMI

  Urethane lined conveyor roller with bearing. The core metal material can be selected from steel, aluminum alloy, and stainless steel (SUS304).
  Please refer to the specification table for roller strength.
  The shore (hardness) of urethane is A90, A70, A50, and the color is natural. Urethane thickness can be selected from 3, 4, and 5.
  A90 is ether urethane, A50/A70 is ester urethane.
  Additionally, the urethane of Shore A90 can be changed to antistatic urethane through additional machining (UDC).

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Free Roller for Light Loads (30 kg or Less)

  ITOUDENKI

  [Features]·For light duties (30 kg or less). [Materials]·STKM.

  Standard Price:	865,007 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Conveyor Rollers-Plastic

  MISUMI

  This is a resin type conveyor roller. The material of the roller is polyacetal.
  You can specify the total length in 1mm increments up to a maximum of 513mm.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  AC Medium/Heavy-Duty Roller ø57

  ITOUDENKI

  [Features]·ø57 roller for medium and heavy duties. ·Thickness is t1.5.

  Standard Price:	2,603,922 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Steel Roller (Conveyor Roller) M Series (R-3812PD)

  MAKITECH

  R-3812P with adjustable roller width. The width can be specified in 1 mm increments from 100 to 1000 mm. Roller unit of the R-3812PD roller conveyor.
  
  [Features]
  · The roller diameter is φ38.1. The minimum roller interval is P50.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Can be manufactured in desired size.
  · Pressed-in bearing, inexpensive type.
  · Model 60 frame standard type

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  MDR, DC Brushless Standard Motor ø57

  ITOUDENKI

  Roller with a pipe diameter of ø57.
  [Features]
  · Energy-saving on power consumption of up to 60%.
  · Run-on-demand transport drives only the necessary parts of the line when needed, reducing electrical energy consumption by up to 60% compared to the drive system of a single externally installed AC motor. Moreover, thanks to its airless effect, you can expect energy savings.
  · Achieves high torque and high-speed transportation.
  · Creates a safe and comfortable space. The 24 V DC power supply is a safe low-voltage power supply which means there is no danger from electrocution accidents.
  · Excellent control (speed control, stopping accuracy and fixed speed transportation).
  · Achieves a non-program environment without needing PLC.
  · Connects to network systems.
  · Drastically reduces total costs. Reduces power consumption by using energy saving transportation and airlessness.

  Standard Price:	3,455,320 IDR-
  Days to Ship:	22 Day(s) or more

• 

  Spiral Return Roller

  JAPAN ROLLER

  Symmetrical spiral shape roller surface has the function of scraping off the "adherence" of the transported material that causes belt meandering and unevenness while rotating. It is recommended to install it in the area where you want to promote ore fall within the conveyor system.

  Standard Price:	3,872,221 IDR
  Days to Ship:	20 Day(s) or more

• 

  Chain Drive Roller

  TAIYO KOGYO

  Features
  • Generic roller size used in chain drive rollers.
  
  Applications
  • For the production of drive conveyors.
  • For replacement of existing drive rollers.

  Standard Price:	920,000 IDR-
  Days to Ship:	Quote

• 

  Return Roller R Type

  JAPAN ROLLER

  One of the most widely used JIS standard steel tube roller. Roller that supports the belt on the return side.

  Standard Price:	1,246,944 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Steel Roller (Conveyor Roller), S Series (Standard Bearing), Diameter φ 12.0 × Width 90 - 390

  MAKITECH

  High durability φ 12 mm roller which employs a standard bearing. Suitable for transporting small parts. Roller unit of the S-1216NB roller conveyor.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  AC Roller for Medium and Light Loads, ø48.6

  ITOUDENKI

  [Features]·ø48.6 roller for medium and light duties. ·Thickness is t1.4.

  Standard Price:	2,913,521 IDR
  Days to Ship:	67 Day(s) or more

• 

  [Clean & Pack]Conveyor Roller Shafts

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  

  Conveyor roller shaft applicable to MISUMI Conveyor Rollers and Miniature Conveyor Rollers. (Excluding HROB and HROBU.)
  
  [Type]Roller Shaft
  [Shaft End Shape]Selectable from 4 types and configurable length from 60 to 550 in 1 mm increments
  
  Click here for Snap Pin page
  Click here for rollers of Shaft & Roller Sets

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Steel Roller Conveyor, M Series (R-6023P), Diameter φ 60.5 × Width 100 - 1000

  MAKITECH

  Medium load φ 60 steel roller. Roller unit of the R-6023P roller conveyor. The widths can be specified in 50 mm increments from 100 to 1, 000 mm.
  
  [Features]
  · The roller diameter is 60.5 mm. The thickness is T2.3. The minimum roller interval is P75.
  · The standard of the roller width (nominal) is 100 to 1, 000 mm at intervals of 50 mm.
  · Pressed-in bearing; inexpensive type.
  · Model 90 frame standard type.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Aluminum Roller (Roller For Conveyor), M Series (RA-3816), Diameter φ38.1 × Width 100 - 600

  MAKITECH

  General purpose φ38 aluminum roller. Individual roller for the lightweight RA-3816 roller conveyor. The widths can be specified in 50 mm increments from 100 to 600 mm.
  
  [Features]
  · The roller diameter is φ38.1. The minimum roller interval is P50.
  · This model is most frequently used with the aluminum rollers.
  · Standard roller width (nominal) is 100W to 600W in 50mm increments.
  · Pressed-in bearing, inexpensive type

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel roller (roller for conveyor) M Series (R-7642N) diameter φ 76.3 x width 100-1000

  MAKITECH

  A heavy-duty/economical type ⌀ 76-mm/t=4.2 mm/shaft ⌀ 20-mm black coating processed steel roller. A single roller unit for the R-7642N roller conveyor. The widths of the roller can be specified in 1-mm increments from 100–1000 mm.
  
  [Features]
  · The roller diameter is ⌀ 76.3 mm. The wall thickness t=4.2 mm. The minimum roller interval is P100.
  · The standard roller width (nominal) is 100–1000 mm in increments of 50 mm.
  · This roller can also be manufactured in non-standard sizes.
  · Machined, high-quality bearings.
  · A type 90 frame standard roller.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Brake Roller SERIES 4000

  FUJI SEISAKUSHO

  [Features]
  - Simple mechanics with superior noise suppressing design and durability.
  - Possible to control transport speed without active application of power, such as electricity, of objects on slanted conveyors.
  - The surface of contact parts of the brake roller body is treated with a special rubber to eliminate noise.
  - Additionally, superior durability can be retained over a long period of time without requiring maintenance.
  - Mounting can be performed either directly or indirectly depending on the status of the objects being transported/conveyor.

  Standard Price:	3,976,792 IDR
  Days to Ship:	8 Day(s) or more

• 

  Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀42 × Width 240 - 490 (AR Type)

  OKURA

  Light and clean. Transport distance and roller width can be specified within the range of 240 - 490 mm.

  Standard Price:	268,240 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Single Unit Steel Roller (Roller for Conveyor) High Strength, Roller Diameter ⌀57 × Width 90 - 990 (SSR Type)

  OKURA

  Shock-resistant type which improves upon the strength of the SR type. Transport distance and roller width can be specified within the range of 90 – 990 mm.

  Standard Price:	227,675 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀76.3 × Width 150 - 1190 (NHR Type)

  OKURA

  Roller diameter ⌀76.3 is the largest for steel rollers. For heavy objects measured in units of tons. Transport distance and roller width can be specified within the range of 150 - 1190 mm.

  Standard Price:	568,936 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Motor Roller, Accumulator Type, Diameter ⌀57 × Width 240 - 990 (PAS Type)

  OKURA

  Can be held for long periods while still energized. Transport distance and roller width can be specified within the range of 240 – 990 mm.
  
  [Features]
  • With a built-in high impedance, low-current motor and inhibition of lock (holding) current to levels comparable to a PWS no-load current, this product is optimal for accumulator lines which are held for a long period of time while energized.

  Standard Price:	3,346,546 IDR
  Days to Ship:	17 Day(s) or more

• 

  Steel Roller, S Series (S-3212P), Diameter φ31.8 × Width 90 - 620

  MAKITECH

  φ 32 steel roller. Roller unit parts for S-3212P roller conveyor, suitable for small item transport.
  
  [Features]
  · The roller diameter is 31.8 mm. The minimum roller interval is P50.
  · The standard of the roller width (nominal) is the standard size of 90 to 620 mm.
  · Configurable size (intermediate size) is not available.
  · Pressed-in bearing; inexpensive type.
  · Model 60 frames.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel Roller, M Series (R-7638N), Diameter φ 76.3 × Width 100 - 1000

  MAKITECH

  Heavy-duty φ 76 steel roller. Galvanized roller surface. Roller unit of the R-7638N roller conveyor. The widths can be specified in 1 mm increments from 100 to 1, 000 mm.
  
  [Features]
  · The roller diameter is 76.3 mm with a thickness of T3.8, with pipe plating; minimum roller interval: P100.
  · The standard roller width (nominal) is 100 to 1, 000 mm at intervals of 50 mm.
  · Configurable size is available.
  · Machined bearings: High quality.
  · 90 type frame, standard type.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  Stainless Steel Roller, S Series (SS-4212), Diameter φ 42.7 × Width 90 - 790

  MAKITECH

  [Features]
  - φ42 stainless steel roller.
  Individual roller for SS-4212 moderate load roller conveyor.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel roller (conveyor roller) M Series (R-5714PD) diameter φ 57.2 x width 100-1000

  MAKITECH

  R-5714P with adjustable roller width. The widths can be specified in 1 mm increments from 100 to 1000 mm. Roller unit of the R-5714PD roller conveyor.
  
  [Features]
  · The roller diameter is φ57.2. The minimum roller interval is P75.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Can be manufactured to desired size.
  · Pressed-in bearing and inexpensive type.
  · Model 90 frame standard type

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel roller (conveyor roller) M Series (R-5721) diameter φ 57.2 x width 100-1000

  MAKITECH

  Moderate load, high quality φ57 t2.1 thick steel roller with increased impact-resistance. Roller unit of the R-5721 roller conveyor.
  
  [Features]
  · The roller diameter is φ57.2. The thickness is t2.1. The shock resistance is improved. The minimum roller interval is P75.
  · Standard roller width (nominal) is 100W to 1, 000W in 50mm increments.
  · Machined bearings, high quality.
  · 90 Frame Standard Type

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel roller (conveyor roller) M Series (R-5723) diameter φ 57.2 x width 100-1000

  MAKITECH

  Heavy duty φ57 steel roller which is highly versatile. Roller unit of the R-5723 roller conveyor.
  
  [Features]
  - Roller diameter φ57.2; thickness t2.3; heavy duty with a high level of versatility.
  · Minimum roller interval is P75.
  · The standard of the roller width (nominal) is 100W to 1, 000W at intervals of 50mm.
  · Machined bearings, high quality.
  · Model 90 frame standard type

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel roller (conveyor roller) M Series (R-6023D) diameter φ 60.5 x width 100-1000

  MAKITECH

  R-6023 with adjustable roller width. The widths can be specified in 1 mm increments from 100 to 1000 mm. Roller unit of the R-6023D roller conveyor.
  
  [Features]
  · The roller diameter is φ60.5. The thickness is t2.3. The minimum roller interval is P75.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Can be manufactured to desired size.
  · Machined bearings, high quality.
  · Model 90 frame standard type

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel roller (conveyor roller) S Series (S-6038N) diameter φ 60.5 x width 90-990

  MAKITECH

  Heavy duty φ60 · Thickness t3.8 · Shaft diameter φ16 steel roller. The roller surface has been galvanized. Roller unit of the S-6038N roller conveyor.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Steel roller conveyor S series (S-5721NB, standard bearing)

  MAKITECH

  [Features]
  - φ38 t2.1 thick improved shock-resistant roller which employs a standard bearing and boss integration for quiet operation and high durability.
  · S-5721NB is a roller component of the roller conveyor.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Conveyor Roller (for Medium/Heavy　Load) SERIES FF3

  FUJI SEISAKUSHO

  Highly functional multi-purpose plastic conveyor rollers with improved dustproof and waterproof performance, as well as excellent impact resistance and sound deadening properties.
  [Features]
  ·For medium and heavy loads. A double labyrinth seal is used for the seal part.
  ·Press bearings (steel, stainless steel) and precision bearings (6002ZZ) are available.
  ·In addition, the tube material can be selected from hard polyvinyl chloride (PVC) and steel (ST), which have excellent impact resistance, depending on the application.
  ·The diameter can be selected from ⌀50, 51, 57, and 61 mm (diameters of 50, 51, 57, and 61 mm) according to the application.
  [Applications]
  ·Ideal for small packages, bottles, cans, foods, newspapers, magazines, textiles, lightweight cartons, and other lightweight items.
  ·Because it contains bearings, it can rotate more smoothly.
  ·Because it uses a double labyrinth seal, it is durable even in dusty and watery environments.

  Standard Price:	468,778 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Conveyor Roller (for Light Loads) SERIES FF1

  FUJI SEISAKUSHO

  [Features]
  Achieves smooth rotation along with miniaturization / weight reduction and low noise, while also featuring shock resistance in addition to chemical resistance, corrosion resistance and elasticity.

  Standard Price:	107,579 IDR-
  Days to Ship:	8 Day(s) or more

• 

  MDR Brushless Motor Pulley, PM320HS Series

  ITOUDENKI

  A pulley for use with driven belt conveyors

  Standard Price:	2,990,921 IDR-
  Days to Ship:	22 Day(s) or more

• 

  AC Light-Duty Roller ø38

  ITOUDENKI

  [Features]·ø38 roller for light duties. ·Thickness is t1.2.

  Standard Price:	2,510,111 IDR-
  Days to Ship:	11 Day(s) or more

Loading...