Holder

• 

  Ring Spanner MHZ-1·MHZ-2

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A ring wrench that uses bits.
  · Can be used with products that have slits in the press ring such as adapters, mirror holders, and lens holders.
  · The MHZ-1 is a fixed bit type. The range of use for the MHZ-2 can be increased by changing the position of the bit.

  CAD ：

  2D

  Standard Price:	596,860 IDR-
  Days to Ship:	11 Day(s) or more

• 

  TV adapter with standard interoperability for microscope use

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An adapter for easily mounting a TV camera to a "tool scope" working-microscope.
  · Can be mounted with a TV camera with a C mount by removing the eyepiece lens and inserting the TS-TVA.
  · A scale plate can be projected at the same time.
  · Tool Scope is a registered trademark of Chuo Precision Industrial Co., Ltd.

  CAD ：

  2D

  Standard Price:	6,898,729 IDR
  Days to Ship:	11 Day(s) or more

• 

  TV adapter with cross interoperability for microscope use

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An adapter for easily mounting a TV camera to a "tool scope" working-microscope.
  · Can be mounted with a TV camera with a C mount by removing the eyepiece lens and inserting the TS-TVA.
  · A scale plate can be projected at the same time.
  · Tool Scope is a registered trademark of Chuo Precision Industrial Co., Ltd.

  CAD ：

  2D

  Standard Price:	6,898,729 IDR
  Days to Ship:	15 Day(s) or more

• 

  Press ring set

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A Duracon® ring set consisting of a press ring and cushioning material.
  "Duracon®" is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.

  CAD ：

  2D

  Standard Price:	303,961 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Cross movement holder plate type

  SURUGA SEIKI

  [Features]
  · A holder that can support and fix various types of adapter, and finely adjust them in the YZ axes and Yzθyθz axes.
  · A plate type cross motion holder with good stability and which can be used for experiments with low optical axes.
  · 0.5 mm screws are used for the fine movement parts.
  · For the F02-1E type, fine movement of the YZ axes can be made using the operating screw. For the F02-4E type, fine movement of the Yzθyθz axes can be made

  CAD ：

  2D / 3D

  Standard Price:	5,647,785 IDR-
  Days to Ship:	20 Day(s) or more

• 

  3-axis lens holder

  SURUGA SEIKI

  [Features]
  · The B11-40C is employed for the X-axis while the optical axis is configured at 45 mm.
  · Replace the lens and/or adapter to allow for use in different types of application.

  CAD ：

  2D / 3D

  Standard Price:	12,036,316 IDR-
  Days to Ship:	11 Day(s) or more

• 

  5-axis lens holder

  SURUGA SEIKI

  Replace the lens and/or adapter to allow for use in different types of application. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	14,557,909 IDR-
  Days to Ship:	21 Day(s) or more

• 

  LD Holder

  SURUGA SEIKI

  F511L: fixed type. F512L, F513L: YZ axis adjustable LD holder. Select according to the number of pins and the pin pitch (pin P.C.D.) of the LD.

  CAD ：

  2D / 3D

  Standard Price:	1,764,836 IDR-
  Days to Ship:	13 Day(s) or more

• 

  LD Holder (Chip Carrier Type)

  SURUGA SEIKI

  [Features]
  · A Chip Carrier type LD holder with a built-in Peltier element.
  · Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
  · The switching for the anode/cathode of the LD can be configured by replacing the jumper pins.
  · There are two types of Chip Carrier LD holder. Configure according to the mounting (output) direction of the LD.
  · For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
  · The F129-1 water cooling adapter is also available.
  · Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.

  CAD ：

  2D / 3D

  Standard Price:	13,581,263 IDR
  Days to Ship:	13 Day(s) or more

• 

  LD holder (To-Package type)

  SURUGA SEIKI

  [Features]
  · A To-Package type LD holder with a built-in Peltier element.
  · Features a built-in Peltier element, and a calibrated 10kΩ thermistor sensor.
  · Supports LD sizes of ø5.6 (Pin PCD, 2.0) and ø9.0 (Pin PCD, 2.54) for three-pins and for four-pins respectively.
  · For common anodes and common cathodes, etc., configure by replacing the jumper pins.
  · For connectors, a D-sub9 pin female is used for driving the LD, and a D-sub9 pin male is used for the temperature controller.
  · The F129-1 water cooling adapter is also available.
  · Use a low temperature circulating water tank or similar to enable greater stabilization and for even lower temperatures.

  CAD ：

  2D / 3D

  Standard Price:	13,581,263 IDR
  Days to Ship:	12 Day(s) or more

• 

  Screw Ring

  SURUGA SEIKI

  A threaded ring for fixing lenses and mirrors. Note that even when the diameters are the same, the shapes can differ depending on the product. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	157,265 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Polarizer holder with tilt

  SURUGA SEIKI

  A holder that can retain items such as polarizing plates and wave plates. It can also rotate (θx) and tilt them (θy, θz). Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	11,684,385 IDR
  Days to Ship:	21 Day(s) or more

• 

  Alignment target

  SURUGA SEIKI

  Can be used for optical system constructions.
  
  [Features]
  · Used for adjusting the optical axis when building an optical system for the Opt Station.
  · Push-down the large target-fixing pin to fix to the tapped hole on the plate board.
  · Return the pin upward to install in any position.
  · The mark on the target is adjusted to a height of 45 mm.
  · Target stickers (black cross on a white base / white cross on a black base) are included.

  CAD ：

  2D / 3D

  Standard Price:	1,957,573 IDR
  Days to Ship:	13 Day(s) or more

• 

  Camera holder (F119-2)

  SURUGA SEIKI

  A holder for fixing cameras, CCD cameras, and vidicon cameras, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	2,379,596 IDR
  Days to Ship:	8 Day(s) or more

• 

  Adapter for connector

  SURUGA SEIKI

  [Features]
  · An adapter for optical fiber connectors.
  · An FC type receptacle is included as standard, so please select according to the connector.
  · The FC type receptacle is designed so that when a connector is inserted, the end surface of the ferrule extends about 0.5 mm from the receptacle surface. Ideal for placing in close proximity to other items.

  CAD ：

  2D / 3D

  Standard Price:	1,570,573 IDR
  Days to Ship:	8 Day(s) or more

• 

  Sensor/laser holder

  SURUGA SEIKI

  [Features]
  · Can adjust the tilt angle of small sensors and laser pointers.
  · P.C.D.32 tapped holes are included on the holder surface. Uses these to mount various types of adapter plate.

  CAD ：

  2D / 3D

  Standard Price:	2,928,882 IDR
  Days to Ship:	13 Day(s) or more

• 

  Pinhole Adapter

  SURUGA SEIKI

  Used by attaching to various types of cross motion holder. The applicable diameter of the pin hole is ø16 mm. Attachment and detachment is carried out using a threaded ring system. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	796,576 IDR
  Days to Ship:	13 Day(s) or more

• 

  Prism Holder

  SURUGA SEIKI

  [Features]
  · Configured so that the optical axis height is at the center of the element when the element is 20 mm, and standardized at 25 mm from the bottom.
  · Move the upper sliding part to fix the prism.
  · Use the upper knob to fix without having to move the element.
  · The F551-20 bottom plate features M4 tapped holes. Mount a rod to change to a rod type.
  · F552-20 can be finely adjusted.
  · The elements are positioned using the pins in the three locations.

  CAD ：

  2D / 3D

  Standard Price:	1,573,622 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Mirror Holder

  SURUGA SEIKI

  An affordable mirror holder for fixing items such as mirrors or plate beam splitters. The tilt can be finely adjusted in the two axial directions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	2,559,417 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Ring Wrench (A92)

  SURUGA SEIKI

  A ring wrench for tightening threaded rings. Variable types and fixed types are available in sizes to fit different ring diameters. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  Standard Price:	1,219,584 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Polarizing Prism Holder

  SURUGA SEIKI

  A holder for retaining cylindrical prisms such as a Glan-Thompson prism. Note: The CAD data of this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	3,702,880 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Adapter for polarizer prism

  SURUGA SEIKI

  An adapter that can retain polarizing prisms and other similar items. Can be mounted to polarizer holders. Can be mounted to holders for F62, F63 and F64 elements which have a diameter of ø30.

  CAD ：

  2D / 3D

  Standard Price:	1,378,599 IDR
  Days to Ship:	13 Day(s) or more

• 

  Polarizer holder

  SURUGA SEIKI

  [Features]
  · A holder used for retaining and rotating polarizing plates, polarizing filters, and wave plates, etc.
  · Can be manually rotated 360°.

  CAD ：

  2D / 3D

  Standard Price:	3,710,503 IDR-
  Days to Ship:	17 Day(s) or more

• 

  Variable slit

  SURUGA SEIKI

  [Features]
  · A double door type variable slit.
  · The slit width is adjusted using the micrometer head.
  · The slit width and the position of the center are constant.
  · V-groove rails and cross rollers are used for the double door slit section guide, decreasing the tilt of the slits during operation.
  · Use a Hartmann plate to adjust the slit height.

  CAD ：

  2D / 3D

  Standard Price:	18,426,373 IDR
  Days to Ship:	13 Day(s) or more

• 

  Fixed-type Holder

  SURUGA SEIKI

  Can retain and fix various types of adapter. The optical axis height is standardized at 25 mm from the bottom. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	603,076 IDR
  Days to Ship:	11 Day(s) or more

• 

  Fixed Holder Rod Type

  SURUGA SEIKI

  A holder for retaining and fixing various types of adapter. Fix using an M2.6-P.C.D.32 screw. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	609,174 IDR
  Days to Ship:	13 Day(s) or more

• 

  Fine Adjustment Prism Holder

  SURUGA SEIKI

  Can rotate prisms, cube beam splitters, and similar other objects and tilt them in the two axes. Prisms are fixed using the slide clamp screw on the upper part and an element clamp screw.

  CAD ：

  2D / 3D

  Standard Price:	4,881,410 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Polarizer holder with fine adjustment

  SURUGA SEIKI

  [Features]
  · A holder consisting of the F62 type polarizer holder with additional fine adjustment functionality.
  · Allows for 360° coarse movement with the clamp loosened. With the clamp tightened, it can perform micro adjustments on the micrometer head to ±4°.
  · The F63-30N can be fitted with the F69polarizing prism adapter.
  · The scale is structured in a way that allows zero point alignment, and so can be set to any angle from the reference angle.
  · Calculating the optical axis of the rod stand.

  CAD ：

  2D / 3D

  Standard Price:	6,816,405 IDR-
  Days to Ship:	17 Day(s) or more

• 

  Resin ring

  SURUGA SEIKI

  [Features]
  · A product for fixing lenses and mirrors to holders by the manufacturer.
  · Note that this product has been designed exclusively for holders from the manufacturer.
  · Note that even when the diameters are the same, the shapes can differ depending on the product.

  CAD ：

  2D / 3D

  Standard Price:	99,215 IDR
  Days to Ship:	8 Day(s) or more

• 

  Precision Mirror Holder (Gimbal Type)

  SURUGA SEIKI

  The center of the tilt axis coincides with the mirror surface. Rearrange the plates to change to the left or right, or to a type with a vertical incidence angle of 45°. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	6,609,945 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Centering Lens Holder: For Collimate Lens, Stability and Operability Emphasized Type

  SURUGA SEIKI

  [Features]
  · Can be used for the construction of optical systems.

  Standard Price:	8,736,915 IDR
  Days to Ship:	13 Day(s) or more

• 

  Self-centering Lens Holder: for Collimating Lens Precision Cross Roller Type

  SURUGA SEIKI

  [Features]
  · Can be used for the construction of optical systems.

  Standard Price:	7,962,917 IDR
  Days to Ship:	17 Day(s) or more

• 

  Centering Lens Holder: Single Lens Stable Operation Focusing Type

  SURUGA SEIKI

  Can be used for optical system constructions. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	8,930,414 IDR
  Days to Ship:	13 Day(s) or more

• 

  Centering lens holder: for Objective lens Fixed Type

  SURUGA SEIKI

  [Features]Inexpensive optical holder with no adjustment mechanism. [Applications]It can be used for optical experiments.

  CAD ：

  2D / 3D

  Standard Price:	1,185,099 IDR
  Days to Ship:	11 Day(s) or more

• 

  Centering Lens Holder: Objective Lens Stable Operation Focusing Type

  SURUGA SEIKI

  [Features]
  · Can be used for the construction of optical systems.
  · When using objective lenses with large outer diameters. The F504-40 series high rigidity cross motion holder is recommended.

  CAD ：

  2D / 3D

  Standard Price:	8,736,915 IDR
  Days to Ship:	21 Day(s) or more

• 

  Centering Lens Holder: Objective Lens Precision Cross Roller Type

  SURUGA SEIKI

  [Features]
  · Can be used for the construction of optical systems.
  · When using objective lenses with large outer diameters. The F504-40 series high rigidity cross motion holder is recommended.

  CAD ：

  2D / 3D

  Standard Price:	7,962,917 IDR
  Days to Ship:	21 Day(s) or more

• 

  High Rigidity Cross Movement Holder

  SURUGA SEIKI

  A precision cross motion holder that can support and hold various types of adapter, and finely adjust them in the YZ axes. Includes a direct lock mechanism that can directly fix the movable parts. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D / 3D

  Standard Price:	7,577,443 IDR-
  Days to Ship:	8 Day(s) or more

• 

  High Performance Cross Motion Holder

  SURUGA SEIKI

  Can be mounted with various types of adapter and then finely adjust them in the YZ axes. Capable of a smooth and straight feed. Designed with an optical axis height of 25 mm from the bottom. For use with the Opt Station.

  CAD ：

  2D / 3D

  Standard Price:	8,154,891 IDR
  Days to Ship:	21 Day(s) or more

• 

  Filter Holder (F72-1)

  SURUGA SEIKI

  [Features]
  · A holder for setting round and square type filters.
  · Can be fitted with up to four filters with external diameters of ø50 mm.
  · Filters are inserted from the top, but as they are only placed down, they can be angled depending on the filter thickness.

  CAD ：

  2D / 3D

  Standard Price:	1,967,483 IDR
  Days to Ship:	11 Day(s) or more

• 

  Filter Holder (F561)

  SURUGA SEIKI

  [Features]
  · A holder for setting filters with diameters of ø15 mm or ø20 mm.
  · The optical axis height is standardized at 25 mm from the bottom.
  · Can be fitted with two filters.
  · Fix by loosening the clamp and sliding the holding part backwards or forwards in line with the thickness of the filter.
  · Filters with a thickness of up to 4 mm are supported.
  · The bottom plate features an M4 tapped hole. Mount a rod to change to a rod type.
  · The F561-20 can also be used as a simplified polarizing element holder by directly turning the element.

  CAD ：

  2D / 3D

  Standard Price:	2,732,333 IDR
  Days to Ship:	11 Day(s) or more

• 

  Kinematic round mirror holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A three-point support type mirror holder.
  · The sample is fixed using set screws and a pad (round and square types only).
  · The set screw can be turned using a straight slot flathead screwdriver (not included). The round mirror holder is for circular optical devices. The tilt can be adjusted in the two axial directions.
  · The square mirror holder if for square optical devices. The tilt can be adjusted in the two axial directions.
  · The grooved mirror holder is for rectangular optical devices. The tilt can be adjusted in the two axial directions (square optical devices can also be used).

  CAD ：

  2D

  Standard Price:	2,897,805 IDR
  Days to Ship:	18 Day(s) or more

• 

  circular lens holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A holder for circular lenses (can also be used with mirrors).
  · Metal frame and shaft only. Does not include a tilt adjustment function.

  CAD ：

  2D

  Standard Price:	1,382,647 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Polarization element holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The POH-30, POH-50 hold polarizing plates and wave plates and is used for the adjustment of polarizing surfaces, etc.
  · For devices such as Glan-Thompson prisms and wave plates with small external shapes, combine with an adapter for polarizer element holders.
  · When the coarse movement clamp is loosened, it can move coarsely over 360°. When the coarse movement clamp is tightened, it can perform fine adjustments on the micrometer head.
  · Since the scale ring moves independently, the zero point can be set to any angle.
  · The C-301- (1) is a holder for holding cube type prisms. It does not include a tilt adjustment function, etc.

  CAD ：

  2D

  Standard Price:	6,332,830 IDR-
  Days to Ship:	18 Day(s) or more

• 

  Camera holder

  CHUO PRECISION INDUSTRIAL

  [Features]
  · HC-T3 and HC-T4 are products in which a ø12 mm shaft is attached to a free camera platform with tripod threads (nominal size 1/4).
  · HC-T2N is a product in which a ø12 mm shaft is attached to a single-handle camera platform with tripod threads (nominal size 1/4).

  CAD ：

  2D

  Standard Price:	906,509 IDR-
  Days to Ship:	8 Day(s) or more

• 

  TV adapter cross micro for microscope

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An adapter for easily mounting a TV camera to a "tool scope" working-microscope.
  · Can be mounted with a TV camera with a C mount by removing the eyepiece lens and inserting the TS-TVA.
  · A scale plate can be projected at the same time.
  · Tool Scope is a registered trademark of Chuo Precision Industrial Co., Ltd.

  CAD ：

  2D

  Standard Price:	6,898,729 IDR
  Days to Ship:	11 Day(s) or more

Loading...