VENN Drain Traps, Steam Traps

• 

  AK-21 Type Air Trap

  VENN

  Pipe ends, receiver tanks, and drainage separators, etc.
  
  [Features]
  · A simple structure for easy maintenance.
  · A structure that is strong against contamination and scale.
  · Structured so that drainage can easily flow-in. As such, no pressure-equalizing pipe needs be installed.

  Standard Price:	2,778,167 IDR-
  Days to Ship:	12 Day(s) or more

• 

  AT-6F Type Steam Trap

  VENN

  [Features]
  · Features a short start-up time and speedy discharge of the initial ventilation air and drainage.
  · An energy saving product that can be changed to a disc trap and that makes effective use of steam.
  · The thermoelement is made using SUS316L, giving excellent corrosion resistance and durability.
  · Can be mounted horizontally, vertically, and from the side.
  · Operates at a temperature 10°C below saturation temperature, helping save on energy by ensuring no discharge of live steam and no valve body blanking.

  Standard Price:	4,284,167 IDR-
  Days to Ship:	12 Day(s) or more

• 

  AK-2H Type Steam Trap

  VENN

  [Features]
  · General-purpose drain trap for pipelines and headers etc. Each of the mechanisms are attached to the cover for easy maintenance.
  · SSR-Shockless Self Return-mechanisms utilized.
  · No shock when the valve is closed. The valve self-closes independently of the buoyancy of the bucket, allowing it to be used with low pressures and up.
  · Features a built-in strainer (nominal diameter: 32 to 50 only). Note: For the Ministry of Land, Infrastructure, Transport and Tourism specification, install an 80-mesh strainer to the trap inlet.

  Standard Price:	20,454,500 IDR
  Days to Ship:	13 Day(s) or more

• 

  AF-12 Type Steam Trap

  VENN

  [Features]
  · A float-type steam trap for use with pipe ends, low-pressure steam headers, and small heat exchangers, etc.
  · Utilizes a wax type air venting valve, helping reduce the warm-up time and prevent air obstruction.
  · The flow direction can be chosen, helping make construction easy.
  · Includes suspension brackets for easy pipe support.
  · Stable operation regardless of how much drainage is produced.

  Standard Price:	4,954,500 IDR-
  Days to Ship:	12 Day(s) or more

• 

  AT-1A Type Radiator Trap

  VENN

  [Features]
  · A bellows type radiator trap for use in heating radiators of 100kPa or below. Can also be used as an end trap in low-pressure pipe lines. Corresponds to machine and equipment construction standard specifications as prescribed by the Ministry of Land, Infrastructure, Transport and Tourism and various government agencies.
  · Structured so that drainage does not accumulate, helping prevent pipes from freezing.
  · Rapidly discharges the initial ventilation drainage and air.

  Standard Price:	1,977,333 IDR-
  Days to Ship:	10 Day(s) or more

• 

  AT-1S Type Radiator Trap

  VENN

  [Features]
  · A bellows type radiator trap for use in heating radiators of 100kPa or below. Can also be used as an end trap in low-pressure pipe lines.
  · Corresponds to machine and equipment construction standard specifications as prescribed by the Ministry of Land, Infrastructure, Transport and Tourism and various government agencies.
  · Structured so that drainage does not accumulate, helping prevent pipes from freezing.
  · Rapidly discharges the initial ventilation drainage and air.

  Standard Price:	1,636,333 IDR-
  Days to Ship:	10 Day(s) or more

• 

  AT-4A Type Radiator Trap

  VENN

  [Features]
  · A thermowax type radiator trap for use in heating radiators of 0.35MPa or below.
  · Can also be used as an end trap.
  · The piping is inclined downwards so that drainage does not accumulate, helping prevent pipes from freezing or corroding.
  · Rapidly discharges the initial ventilation drainage and air.
  · The valve closes immediately after drainage discharge.
  · The inlet features a hex union pipe for easy installation.

  Standard Price:	1,966,000 IDR-
  Days to Ship:	12 Day(s) or more

• 

  AT-4S Type Radiator Trap

  VENN

  [Features]
  · A thermowax type radiator trap for use in heating radiators of 0.35MPa or below.
  · Can also be used as an end trap.
  · The piping is inclined downwards so that drainage does not accumulate, helping prevent pipes from freezing or corroding.
  · Rapidly discharges the initial ventilation drainage and air.
  · The valve closes immediately after drainage discharge.
  · The inlet features a hex union pipe for easy installation.

  Standard Price:	2,125,167 IDR
  Days to Ship:	18 Day(s) or more

• 

  ATB-5F Type Steam Trap with Bypass (Triple Function)

  VENN

  [Features]
  · Boasts a large discharge capacity and so can be used for everything from pipe ends to large-type equipment.
  · Operates at a temperature 10°C below saturation temperature, helping save on energy by ensuring no discharge of live steam and no valve body blanking.
  · For types with a nominal diameter of 32 to 50, the adoption of a movable valve body provides excellent sealing performance and durability.
  · The test valve can be directly mounted to the trap.

  Standard Price:	6,668,333 IDR-
  Days to Ship:	10 Day(s) or more

• 

  ATB-5 Type Steam Trap with Bypass (Triple Function)

  VENN

  An integrated compact structure incorporating three functions. In addition to functioning as a thermostatic type trap, it can also be used as a bypass circuit, and a stop valve.
  Effective for better utilization of space and for reducing equipment costs.
  
  [Features]
  · Boasts a large discharge capacity and so can be used for everything from pipe ends to large-type equipment.
  · Operates at a temperature 10°C below saturation temperature, helping save on energy by ensuring no discharge of live steam and no valve body blanking.
  Note: Types with nominal diameters of 32 to 50 operate at a temperature 15°C lower.
  · For types with a nominal diameter of 32 to 50, the adoption of a movable valve body provides excellent sealing performance and durability.
  · The test valve can be directly mounted to the trap.

  Standard Price:	5,139,167 IDR-
  Days to Ship:	8 Day(s) or more

• 

  AT-6 Type Steam Trap

  VENN

  [Features]
  · Features a short start-up time and speedy discharge of the initial ventilation air and drainage.
  · An energy saving product that can be changed to a disc trap and that makes effective use of steam.

  Standard Price:	3,216,000 IDR-
  Days to Ship:	12 Day(s) or more

• 

  AT-6FB Type Steam Trap (Built-in Anti-Freezing Valve)

  VENN

  [Features]
  · The AT-6F steam trap features a built-in non-freeze type valve at the inlet. This protects the trap against freezing when used in cold-climate regions that are prone to freezing.
  · Features a large initial air ventilation volume. Rapidly discharges drainage and air.
  · Both SS and SUS are available for the main body material.
  · Features a built-in pressure type non-freeze valve at the inlet.

  Standard Price:	5,261,500 IDR-
  Days to Ship:	12 Day(s) or more

• 

  BH-1 Type Silencer

  VENN

  Reduces noise when the drain discharges.
  
  [Features]
  · Piping can be connected to the outlet, helping guide the drainage to a safe location.
  · The internal silencing material uses Venn's own proprietary filling material, ensuring minimal back-pressure load on the steam trap while simultaneously giving excellent noise canceling effects.

  Standard Price:	2,386,333 IDR-
  Days to Ship:	12 Day(s) or more

• 

  AK-1H Type Steam Trap

  VENN

  [Features]
  · General-purpose drain trap for pipelines and headers etc. Each of the mechanisms are attached to the cover for easy maintenance.
  · A simple internal valve structure for easy maintenance.
  · Features a built-in strainer.
  · However, for the Ministry of Land, Infrastructure, Transport and Tourism specification, install an 80-mesh strainer to the trap inlet.

  Standard Price:	1,966,000 IDR-
  Days to Ship:	8 Day(s) or more

• 

  AK-5F Type Steam Trap

  VENN

  Small capacity (MAX 2.0MPa) bucket type steam trap. Can be used for laundry machines, heating equipment, in the food industry, and for medical equipment.
  
  [Features]
  · Utilizes SSR-Shockless Self Return- mechanism.
  · Reduced shock when the valve is closed. The valve self-closes independently of the buoyancy of the bucket, allowing it to be used with low pressures to high pressures.
  · Features a compact body for easy installation in confined places.
  · Features a built-in strainer. However, with the Ministry of Land, Infrastructure, Transport and Tourism specification, install an 80-mesh strainer to the trap primary side.

  Standard Price:	4,534,167 IDR-
  Days to Ship:	12 Day(s) or more

• 

  AK-5 Type Steam Trap

  VENN

  Small capacity (MAX 2.0MPa) bucket type steam trap. Can be used for laundry machines, heating equipment, in the food industry, and for medical equipment.
  
  [Features]
  · Utilizes SSR-Shockless Self Return- mechanism.
  · Reduced shock when the valve is closed. The valve self-closes independently of the buoyancy of the bucket, allowing it to be used with low pressures to high pressures.
  · Features a compact body for easy installation in confined places.
  · Features a built-in strainer. However, with the Ministry of Land, Infrastructure, Transport and Tourism specification, install an 80-mesh strainer to the trap primary side.

  Standard Price:	2,977,333 IDR-
  Days to Ship:	12 Day(s) or more

• 

  AK-16 Type Steam Trap

  VENN

  Sleek design with excellent corrosion resistance, durability. For small machinery/equipment and clean steam lines etc.
  
  [Features]
  · Utilizes an SSR-Shockless Self Return- mechanism.
  · Reduced shock when the valve is closed. The valve self-closes independently of the buoyancy of the bucket, allowing it to be used with low pressures to high pressures.
  · Features a compact body for easy installation in confined places.
  · Features a built-in strainer.
  · However, with the Ministry of Land, Infrastructure, Transport and Tourism specification, install an 80-mesh strainer to the trap primary side.
  · A stainless steel small capacity (MAX 1.6MPa) bucket type steam trap. Can be used for laundry machines, heating equipment, in the food industry, and for medical equipment.

  Standard Price:	4,977,333 IDR-
  Days to Ship:	12 Day(s) or more

• 

  AF-11H Type Large Capacity Trap

  VENN

  A solid and simple structure with excellent durability.
  
  [Features]
  · Use for large-volume drainage generating equipment such as heat exchangers, dryers, and headers, etc.
  · A simple structured, floating lever-type trap.
  · The valve body part is a balanced structure. As such, the trap boasts a large discharge capacity despite its small size.
  · The adoption of a balanced structure enables both a large discharge capacity and small size.
  · Easy disassembly, maintenance, and inspection.
  · Utilizes a wax type air vent valve, helping prevent air obstructions.
  · Continuous drainage discharge.

  Standard Price:	7,977,333 IDR-
  Days to Ship:	10 Day(s) or more

• 

  AF-11HF Type Large Capacity Trap

  VENN

  Use for large-volume drainage generating equipment such as heat exchangers, dryers, and headers, etc.
  
  [Features]
  · A floating and lever-type trap with a simple structure.
  · A solid and simple structure with excellent durability.
  · Easy disassembly, maintenance, and inspection.
  · Utilizes a wax type air vent valve, helping prevent air obstructions.
  · Continuous drainage discharge.

  Standard Price:	28,636,333 IDR
  Days to Ship:	12 Day(s) or more

• 

  BA-5 Type, Drain Separator

  VENN

  Main/Branch pipes all equipment inlets, etc.
  
  [Features]
  · Separates water droplets and condensate (drainage) generated in the steam and air pipes.
  · Improved dryness in the steam lines enables a stabilized heat supply and increases heating efficiency.
  · Reduces steam hammering as caused by initial steam ventilation drainage build-up.
  · More stable when the regulator valve is operating and reduces corrosion and wear.
  · Reduces the generation of rust inside pipes by eliminating water droplets.

  Standard Price:	2,988,833 IDR-
  Days to Ship:	12 Day(s) or more

Loading...