TAKIGEN Flat Type

• 

  Button Latch C-216

  TAKIGEN

  [Features]
  · Pulling (pushing) the button moves the latch by 7 mm

  CAD ：

  2D / 3D

  Standard Price:	153,161 IDR-
  Days to Ship:	Same day

• 

  Inner Handle A-866

  TAKIGEN

  [Features]
  · (A-866-1) Inner handle connecting ø4 rods.
  · Easy to install.
  · (A-866-2) Inner handle that connects ø3.5 rods

  CAD ：

  2D / 3D

  Standard Price:	364,971 IDR
  Days to Ship:	Same day

• 

  Stainless Steel Push Latch C-1213-B

  TAKIGEN

  Pushing the latch moves the latch a maximum of 5 mm and opens the door. Close with one touch.
  The closing of the door is smooth due to the free action mechanism used.
  Only the rectangular button can be seen from the front side with the back mounting type. It can also be used for front mounting.

  CAD ：

  2D / 3D

  Standard Price:	118,569 IDR
  Days to Ship:	Same day

• 

  Round Flush Handle A-55

  TAKIGEN

  [Features]
  · Left/right dual use type (If the stopper is turned inside out, right and left can be interchanged)

  CAD ：

  2D / 3D

  Standard Price:	200,357 IDR-
  Days to Ship:	Same day

• 

  Latch Type Plane Handle, A-542

  TAKIGEN

  [Features]
  · One-touch opening and closing panel with new design with good operability. Thin handle of 26 mm on the lower part.
  · A-542-3 can be unlocked from inside with 3 safety mechanisms.
  · The knob can be removed.
  · A-542-3 3-point tightening (with key) A-542-4 waterproof type with 1-point tightening (without key).
  · For right or left opening (this figure/photo shows right opening)

  CAD ：

  2D

  Standard Price:	513,843 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Installed Plane Handle A-651

  TAKIGEN

  [Features]
  · Flat type with few protrusions on door surface.
  · 2 point tightening can be done by incorporating rods.
  · With the built-in click mechanism, a reliable operation feeling can be obtained.
  · Left and right combination

  CAD ：

  2D / 3D

  Standard Price:	679,342 IDR-
  Days to Ship:	Same day or more

• 

  Stainless Steel Snatch Type Flush Handle A-1521

  TAKIGEN

  [Features]
  · Snatch lock type flat handle that is resistant to vibration and impact.
  · Flat type with few protrusions on the door surface.
  · Made of all stainless steel and has excellent corrosion resistance

  CAD ：

  2D / 3D

  Standard Price:	657,077 IDR
  Days to Ship:	11 Day(s) or more

• 

  Stainless Steel Paddle Type Flush Handle, A-1882

  TAKIGEN

  [Features]
  · 1-point tightening (latch type), 2-point tightening, 3-point tightening, and outer/inner handle can be chosen.
  · Made of stainless steel, corrosion resistant.
  · Lock has a reversible key and a dust-proof shutter.
  · Since the resin is built into the latch, operation is smooth.
  · A knob for unlocking from inside also can be installed

  CAD ：

  2D / 3D

  Standard Price:	919,212 IDR-
  Days to Ship:	Same day

• 

  Stainless Steel Small Latch C-1011

  TAKIGEN

  [Features]
  · Pull the lever to retract the latch and open the door.
  · Close it with one touch

  CAD ：

  2D

  Standard Price:	162,737 IDR
  Days to Ship:	Same day

• 

  Stainless Steel, Flat, Latch C-1201

  TAKIGEN

  Pull the lever to retract the latch and open the door. Close it with one touch.
  Made from stainless steel for superior corrosion resistance.

  CAD ：

  2D / 3D

  Standard Price:	407,528 IDR-
  Days to Ship:	Same day or more

• 

  Striker A-151-ST-2

  TAKIGEN

  [Applications]·Latch receiver. [Specifications]Material: Zinc alloy, Surface finish: Chrome plating

  CAD ：

  2D / 3D

  Standard Price:	41,818 IDR
  Days to Ship:	Same day

• 

  Wireless Snap Lock C-10

  TAKIGEN

  Pull the lever to retract the latch and open the door. Close it with one touch.
  It is thin and can be directly attached to the panel surface.

  CAD ：

  2D / 3D

  Standard Price:	66,968 IDR-
  Days to Ship:	Same day

• 

  Stainless Steel Push Latch C-1175

  TAKIGEN

  [Features]
  ·The length of the latch can be adjusted with the adjustment screw.
  · Made of all stainless steel with superior corrosion resistance.
  ·Can be used in combination with various handles.
  [Applications]
  ·Specially equipped vehicles and construction machinery.

  CAD ：

  2D

  Standard Price:	498,677 IDR
  Days to Ship:	12 Day(s) or more

• 

  Embedded Handle for Sealing, FA-818

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it will renew the image of the van body.
  · Emergency escape is possible if a safety push rod is installed in the cabinet.
  · Lock has a reversible key and a dust-proof shutter.
  · Left and right combination

  CAD ：

  2D

  Standard Price:	2,520,396 IDR
  Days to Ship:	12 Day(s) or more

• 

  Small Type Lead FD-895

  TAKIGEN

  [Features]
  · Flat lid with few projections.
  · Packing can be easily incorporated after the latch and lock are painted

  CAD ：

  2D

  Standard Price:	678,479 IDR-
  Days to Ship:	Same day or more

• 

  Plastic Inner Handle AP-866

  TAKIGEN

  [Features]
  · Flat plastic handle with few projections.
  · Integrated structure of inner handle and inner lock.
  · Can be installed with 1 screw

  CAD ：

  2D / 3D

  Standard Price:	196,179 IDR
  Days to Ship:	12 Day(s) or more

• 

  Gate Lock Handle A-860N

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it does not disfigure the appearance of the door.
  · The mounting plate is smaller than conventional products.
  · The protrusion from the door surface is a thin 17 mm.
  · Lock has a reversible key and a dust-proof shutter

  Standard Price:	919,212 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Stainless Steel Drawer Handle A-1860

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it does not disfigure the appearance of the door.
  · Handle is made of stainless steel and has excellent corrosion resistance

  CAD ：

  2D

  Standard Price:	1,208,533 IDR
  Days to Ship:	12 Day(s) or more

• 

  Double Snatch Lock Handle A-866-1L

  TAKIGEN

  [Features]
  · Sturdy anti-vibration structure with a double snatch lock.
  · Handle operation and locking / unlocking can be done from inside and outside the door.
  · Since the inner handle and outer handle are connected with a rod, there is no restriction on the placement

  CAD ：

  3D

  Standard Price:	516,350 IDR
  Days to Ship:	12 Day(s) or more

• 

  Hat Rack Handle A-876

  TAKIGEN

  [Features]
  · 2 types, R40 and R100 are available to suit the curved surface of in-cabin luggage compartments on passenger aircraft, etc.

  CAD ：

  2D / 3D

  Standard Price:	59,636 IDR-
  Days to Ship:	Same day or more

• 

  Plastic Cover Latch AP-846

  TAKIGEN

  Lightweight resin latch
  [Features]
  ·It can be installed with one touch by simply inserting it.
  ·It can be opened and closed with one touch.

  Standard Price:	51,257 IDR
  Days to Ship:	12 Day(s) or more

• 

  Flash Handle A-873

  TAKIGEN

  [Features]
  · Integrated structure of lock and handle.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions on door surface

  CAD ：

  2D

  Standard Price:	1,101,953 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Plastic Flush Handle AP-883

  TAKIGEN

  [Features]
  · Remote operation of locking device is possible using rod or wire.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions.
  · The lightening of weight can be measured as it is made from resin

  CAD ：

  2D

  Standard Price:	668,193 IDR
  Days to Ship:	12 Day(s) or more

• 

  Flush Handle with Control Center A-873-1C

  TAKIGEN

  [Features]
  · Remote operation of locking device is possible using rod or wire.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions

  CAD ：

  2D / 3D

  Standard Price:	2,038,194 IDR
  Days to Ship:	12 Day(s) or more

• 

  Flush Handle with Control Center A-873-2C

  TAKIGEN

  [Features]
  · Remote operation of locking device is possible using rod or wire.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions.
  · A structure that can confirm half-shut status

  CAD ：

  2D / 3D

  Standard Price:	1,748,645 IDR
  Days to Ship:	12 Day(s) or more

• 

  Flush Handle with Control Center A-873-2C-G

  TAKIGEN

  [Features]
  · A-873-2C reverse link type.
  · Remote operation of locking device is possible using rod or wire.
  · The control center of the conventional product is equipped with an internal locking / unlocking mechanism.
  · With a dust proof shutter reversible key, the built-in click mechanism gives a feeling of reliable operation.
  · Flat type with few protrusions.
  · A structure that can confirm half-shut status.
  · Key operation is the same as in a passenger car, with one place where the key can be removed

  CAD ：

  2D

  Standard Price:	1,748,645 IDR
  Days to Ship:	12 Day(s) or more

• 

  Latch Type Handle A-195

  TAKIGEN

  [Features]
  · Door can be opened and closed with one touch

  CAD ：

  2D / 3D

  Standard Price:	243,901 IDR
  Days to Ship:	12 Day(s) or more

• 

  Latch-Type Large Plane Handle A-530

  TAKIGEN

  [Features]
  · Two point tightening closes big doors tightly.
  · One-touch opening and closing.
  · Can be installed without caulking the rod (A-530-2).
  · For right and left use (A-530-1)

  CAD ：

  2D / 3D

  Standard Price:	468,170 IDR-
  Days to Ship:	Same day or more

• 

  Lift-Up Handle A-868

  TAKIGEN

  [Features]
  · This handle adapts to every door; lift doors, sliding doors, opening doors, etc.
  · Large and easy to operate.
  · Remote operation of locking device is possible using rod.
  · Lock has a reversible key and a dust-proof shutter.
  · For left hand or right hand use

  CAD ：

  2D / 3D

  Standard Price:	1,073,562 IDR
  Days to Ship:	12 Day(s) or more

• 

  Flash handle A-898 for Sliding Doors

  TAKIGEN

  [Features]
  · Handle for sliding door.
  · Thinner than conventional product (A-878-1).
  · Handle shape that is easy to hook with your fingers.
  · Can adjust rod length.
  · Lock has small reversible key.
  · For right opening, for left opening

  CAD ：

  2D / 3D

  Standard Price:	967,318 IDR
  Days to Ship:	12 Day(s) or more

• 

  Plastic Large Lid Handle AP-886

  TAKIGEN

  [Features]
  · Soft touch handle ideal for large lift doors.
  · Integrated structure of lock and handle.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions on door surface

  CAD ：

  2D

  Standard Price:	726,103 IDR
  Days to Ship:	12 Day(s) or more

• 

  Flat Snatch Handle A-885-B

  TAKIGEN

  [Features]
  · Flat type with few projections from the door surface.
  · Lock has a reversible key and a dust-proof shutter.
  · Snatch-lock type flat handle is strong against vibration and impact

  CAD ：

  2D

  Standard Price:	996,273 IDR
  Days to Ship:	17 Day(s) or more

• 

  Installed Handle A-860

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it does not disfigure the appearance of the door.
  · Handle is big and easy to grasp with excellent operability.
  · Lock has a reversible key and a dust-proof shutter

  CAD ：

  2D

  Standard Price:	1,225,793 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Plastic, Under Latch CP-387

  TAKIGEN

  Lightweight and ideal for small doors. Can be closed with one touch. Durability is excellent due to using springs.

  CAD ：

  2D / 3D

  Standard Price:	72,451 IDR
  Days to Ship:	Same day

• 

  Stainless Steel Latch Type Flush Handle A-1151R

  TAKIGEN

  [Features]
  · Due to its round design it gives a soft appearance.
  · The door can be opened and closed with one touch.
  · Dimensionally compatible with the A-151 series, with dust-proof and drip proof structure.
  · To improve dust-proofing, a shutter is attached to the front of the key (standard equipment).

  CAD ：

  2D / 3D

  Standard Price:	1,053,175 IDR-
  Days to Ship:	Same day or more

• 

  Stainless Steel Latch Type Flush Handle A-1151R-A

  TAKIGEN

  [Features]
  · Dust-proof and drip-proof structure.
  · Since the latch and the handle are interlocked, it is possible to confirm closing of the door.
  · Soft fully curved design.
  · With three way tightening, even big doors can be tightly closed.
  · Rod and latch (C-1040, etc.) combinations can enable three way tightening with one touch.
  · To improve dust proof properties, a shutter is attached to the front of the key (standard equipment)

  CAD ：

  2D

  Standard Price:	2,134,635 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Stainless Steel Latch Type Flush Handle A-1252

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Vibration resistant latch and striker.
  · Flat type with few protrusions on the door surface

  CAD ：

  2D / 3D

  Standard Price:	1,015,653 IDR
  Days to Ship:	Same day

• 

  Stainless Steel Ring Latch C-1044

  TAKIGEN

  [Features]
  · Since the pull tab stops at 60°, it is ideal for large-sized doors with plurality of use.
  · The strength of the latch can be adjusted with screws.
  · Panel drilling is easy

  CAD ：

  2D / 3D

  Standard Price:	986,698 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel Ring Latch Packing C-1044-P

  TAKIGEN

  [Features]
  · Prevents electrolytic corrosion that occurs when attached to aluminum casing

  CAD ：

  3D

  Standard Price:	36,911 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Stainless Steel Lorry Lock, C-1844

  TAKIGEN

  [Features]
  · The latch of this lock can't be released due to vibration (C-1534).
  · Flat type with few protrusions.
  · Made of stainless steel, corrosion resistant

  CAD ：

  2D

  Standard Price:	294,007 IDR
  Days to Ship:	Same day

• 

  Stainless Steel Vertical Plane Latch Lock C-1401

  TAKIGEN

  [Features]
  · Since the latch part is made of resin, it closes gently.
  · Made of stainless steel, corrosion resistant

  CAD ：

  2D

  Standard Price:	201,129 IDR-
  Days to Ship:	Same day

• 

  Stainless Steel Slim Flush Latch Lock, C-1402

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Suitable for a thin door with a thin shape.
  · Latch with built-in spring has superior vibration resistance.
  · Pull the lever to retract the latch and open the door.
  · Close with one touch.
  · Since the plate thickness is 1.5 mm, it is more robust than our other flat latches.
  · Reliable 2 point lock mechanism

  CAD ：

  2D / 3D

  Standard Price:	562,178 IDR-
  Days to Ship:	Same day or more

• 

  Stainless Steel Flush Snatch Lock Handle, A-1151R-B

  TAKIGEN

  [Features]
  · Snatch lock type flat handle that is resistant to vibration and impact.
  · Made of stainless steel with excellent corrosion resistance. One-touch opening and closing.
  · For both left hand and right hand use

  CAD ：

  2D

  Standard Price:	2,038,194 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Stainless Steel Flush Handle, A-1750

  TAKIGEN

  [Features]
  · With a new one-touch lock mechanism that closes the door, the problem of galling clasps has been improved. Made of stainless steel with excellent corrosion resistance.
  · For left hand or right hand use (the drawings and photo show right hand use)

  CAD ：

  2D / 3D

  Standard Price:	513,509 IDR-
  Days to Ship:	Same day or more

• 

  Stainless Steel Flush Latch, C-1101

  TAKIGEN

  [Features]
  · C-1101-2 can process latches and use them.
  · Made of stainless steel, corrosion resistant

  CAD ：

  2D / 3D

  Standard Price:	273,368 IDR-
  Days to Ship:	Same day or more

Loading...