Engravers/Punches

• 

  Self Inking Stamps for Replacement_Interchangeable Rubber Stamps (Numeric Characters and Chinese Characters Set)

  MARKINGMAN

  [Features]
  ·Self-inker replaceable rubber stamp (number and kanji set) from Union Corporation.

  Standard Price:	964,615 IDR-
  Days to Ship:	1 Day(s)

• 

  Manual Engraving Tool Numbers

  TRUSCO NAKAYAMA

  [Features]
  · The grooves are deeper than those of other companies, and the shanks are thicker as well, so truly beautiful characters can be engraved, and the engravings last for an extremely long time.

  • STOCK

  Standard Price:	77,094 IDR-
  Days to Ship:	Same day or more

• 

  Micro Punch

  TOSMAC

  [Features]
  ･ This is a micro punch in which the punch power can be adjusted thanks to the strength of the spring.
  ･ By replacing the tip, digits, letters and symbols can be engraved.
  ･ It can be used in inspection processes as an inspection stamp.
  [Applications]
  ･ For inscribing and inspection marks. (Inspection marks can also be used for traceability.)

  Standard Price:	1,576,923 IDR
  Days to Ship:	12 Day(s)

• 

  Dowel Pin Punch Set

  KTC(KYOTO TOOL)

  [Features]
  · A new design different from the conventional dowel pin punch.
  · The main body has a hexagonal shape that is hard to roll. Also, chucking rubber is effective for improving workability.
  · A handy set incorporating the main sizes into 1 set.
  [Applications]
  · Maintenance Auxiliary Tool.

  • STOCK

  Standard Price:	479,153 IDR-
  Days to Ship:	8 Day(s)

• 

  Manual Engraving Tool Alphabet

  TRUSCO NAKAYAMA

  [Features]
  · The grooves are deeper than those of other companies, and the shanks are thicker as well, so truly beautiful characters can be engraved, and the engravings last for an extremely long time.

  • STOCK

  Standard Price:	77,094 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Holder-Type Precision Marking Set

  TRUSCO NAKAYAMA

  [Features]
  · It is accurate and durable. Made with alloy tool steel (equivalent to SKS).
  · Engravings can be switched with one touch.
  · As the shank part is φ25 mm, it can also be used for pressing.

  • STOCK

  Standard Price:	8,103,077 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Pin Punch set

  TRUSCO NAKAYAMA

  [Features]
  · Suitable to remove taper pin, spring pin.
  [Applications]
  · For removing taper pin, spring pin, etc.

  • STOCK

  Standard Price:	571,231 IDR
  Days to Ship:	Same day

• 

  Auto Center Punch

  H & H

  By holding the head with one hand, you can perforate accurately without the need for a hammer.
  Elastomer rubber is used for the grip to reduce fatigue during continuous use.

  Standard Price:	217,333 IDR
  Days to Ship:	8 Day(s) or more

• 

  Hand Engraved Handle

  AMACHO

  [Features]
  ·Standard hand stamping is available.
  ·Since the stamp is not held by hand, the stamp can be stamped with greater force, so the characters can be engraved deeper and the stamp can be stamped at a relatively right angle.
  ·Engraving work can be performed safely without the engraving jumping.
  ·The exquisite curvature of the handle shaft makes it easy to engrave.
  ·A hand-engraved handle allows for easier, more beautiful, and stronger engraving.
  ·8 mm square, 10 mm square, 13 mm square, and 16 mm square shank can be engraved.
  ·The hand stamping handle is a stamping tool that assists the stamping work on site.
  ·Since it is possible to engrave without directly holding the engraving, you can engrave safely.
  ·By using the manual stamping handle, you don't have to worry about hitting your hands, so even inexperienced users can stamp deeply.

  • STOCK

  Standard Price:	646,320 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Gasket Punch Set

  HHH

  Center alignment is possible, so donut-shaped packing can be easily made.

  • STOCK

  Standard Price:	2,764,664 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Slot Punch (Rotation Stopper Key Provided)

  MIERASEN

  It provides accurate drilling.

  Standard Price:	2,378,965 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Center Punch

  MOKUBA

  [Features]
  · Induction hardened for extreme hardness and durability.
  · This is an essential item for accurate drilling.
  [Applications]
  · Center striking.
  · Punch-drilling of cylindrical shapes and irregularly shaped objects.

  • STOCK

  Standard Price:	50,086 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Number Stamps Set

  TRUSCO NAKAYAMA

  [Features]
  · Beautiful characters can be engraved using deep carving and a broad shank, with the carved markings lasting an extremely long time.

  • STOCK

  Standard Price:	570,547 IDR-
  Days to Ship:	Same day or more

• 

  Electric Pencil

  TRUSCO NAKAYAMA

  [Features]
  · The pen tip is made from a special copper alloy that features excellent heat resistance, wear resistance, and conductivity.
  · Engraves letters using electrical sparks (arcs).
  · Capable of marking metal with iron as a main constituent. Possible: Iron, stainless steel, hardened steel. Not Possible: Aluminum, copper, titanium, glass, wood.

  • STOCK

  Standard Price:	10,735,385 IDR
  Days to Ship:	1 Day(s)

• 

  Center Punch (10mm x 100mm)

  TRUSCO NAKAYAMA

  [Features]
  · An essential item for accurate drilling.
  [Applications]
  · Center striking.
  · Punch-drilling of cylindrical shapes and irregularly shaped objects.

  • STOCK

  Standard Price:	40,856 IDR-
  Days to Ship:	1 Day(s)

• 

  HSS Precision Combination Stamps Holder

  URATANI SHOJI

  [Features]
  · Alphanumeric characters from 16 digits (1.5 mm) to 6 digits (6.0 mm) can be stamped in one go.
  ·You can change the character combination with a single touch, and it takes about 1/10th of the time required in the past.
  ·Any material can be clearly marked.
  ·A machined holder is also available.
  ·The same holder can engrave characters from 1.5 to 6.0 mm.

  • STOCK

  Standard Price:	1,537,607 IDR-
  Days to Ship:	1 Day(s)

• 

  Flat Stamp

  YAMAZAKI CORPORATION

  Standard Price:	75,847 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Die Stamps (High Speed Steel Type) Case

  URATANI SHOJI

  Standard Price:	704,000 IDR
  Days to Ship:	12 Day(s)

• 

  Letter Punch

  TEKIRO

  ERROR:#VALUE!

  Standard Price:	153,500 IDR
  Days to Ship:	Same day

• 

  Number Punch

  TEKIRO

  Standard Price:	47,500 IDR-
  Days to Ship:	Same day

• 

  Pneumatically Driven Engraving Pen "Work Marker"

  MINITOR

  Problem solved! Clear, sharp engraving, high frequency and smooth strokes.
  [Features]
  ・ Vibrating more than 600 times per minute enables vivid and clear marking
  ・ By using a special cemented carbide material with excellent abrasion resistance for the pen tip, marking on a wide range of materials and long lifespan have been achieved
  ・ The epoch-making drive system produces powerful and stable vibration in spite of its simple structure. In addition, daily maintenance and parts replacement can be easily performed
  ・ Not to mention marking on the round surface, which was not possible with letter punching, etc., there is almost no damage (distortion) to the workpiece due to striking that was likely to occur with letter punching
  ・ Compact and lightweight design does not make you feel tired even when working for a long time
  ·Working air pressure is 0.4 to 0.7 MPa
  ・ Ideal for marking matching marks on various metals, resins, hardened steel (about HRC50), mold parts, etc., deburring precision casting and forged parts, removing sand, etc.

  • STOCK

  Standard Price:	7,854,000 IDR
  Days to Ship:	Quote

• 

  Pneumatically Driven Engraving Pen "Work Marker" Replacement Pen Tip

  MINITOR

  Minitor, letter punching / punch, pneumatically driven engraving pen, work marker, replacement pen tip.

  • STOCK

  Standard Price:	2,052,462 IDR
  Days to Ship:	1 Day(s)

• 

  TRUSCO NAKAYAMA English Letter Punch Set

  TRUSCO NAKAYAMA

  [Features]
  · The grooves are deeper than those of other companies, and the shanks are thicker as well, so truly beautiful characters can be engraved, and the engravings last for an extremely long time.

  • STOCK

  Standard Price:	1,580,462 IDR-
  Days to Ship:	Same day or more

• 

  Vibration Pen (for Engraving)

  TRUSCO NAKAYAMA

  [Features]
  · Iron, aluminum, brass, copper, plastic, glass, stone, wood, and various other materials can be engraved.
  · The body is ABS resin.
  · Inscribes letters via vibration.
  · It is for 100 VAC (50/60 Hz) only.
  · Tip of the vibration pen is φ3.4 mm.
  · A tool for engraving letters on non-ferrous metals, plastics or the like. It uses a 100 VAC power source.

  Standard Price:	1,104,445 IDR
  Days to Ship:	1 Day(s)

• 

  Standard Punch

  TRUSCO NAKAYAMA

  [Features]
  · It provides accurate drilling.
  [Applications]
  · For setting in a special large punching machine for drilling of round holes in iron and steel materials for bridges, girders, etc.

  • STOCK

  Standard Price:	450,615 IDR-
  Days to Ship:	1 Day(s)

• 

  Reamer Punch

  TRUSCO NAKAYAMA

  [Features]
  · Use as a temporary fixer for holes in iron plates matched with the Fitting Punch when taking angles or performing inspections.
  [Applications]
  · For temporarily securing iron plate holes.

  • STOCK

  Standard Price:	308,205 IDR-
  Days to Ship:	1 Day(s)

• 

  HSS Precision Combination Stamps A Set

  URATANI SHOJI

  [Features]
  · Alphanumeric characters from 16 digits (1.5 mm) to 6 digits (6.0 mm) can be stamped in one go.
  ·You can change the character combination with a single touch, and it takes about 1/10th of the time required in the past.
  ·The same holder can engrave characters from 1.5 to 6.0 mm.
  ·The precision of the holder engraving is high, so there is no wobble in the characters.
  ·It is extremely durable and can be used to engrave on any material.

  • STOCK

  Standard Price:	11,004,973 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Manual Numbering Stamp

  URATANI SHOJI

  [Features]
  ·The use of high-speed steel, which exhibits excellent durability, enables clear engraving on a wide variety of metals.
  ·The number of digits (standard 5 digits) can be freely selected using the made-to-order system.
  ·Since the shank diameter is ⌀25 mm, it can also be used in presses.
  ·1 ring contains 12 characters, and the characters can be changed smoothly.
  ·No need to replace.

  Standard Price:	16,076,923 IDR-
  Days to Ship:	Quote

• 

  Mold date mark OP type (Inside arrow plate side replacement type)

  URATANI SHOJI

  [Features]
  ·Ideal for OP type plastic molds and for lot management of molded products.
  ·It is a product for embedding in a plastic mold.
  ·The date display can be changed with one touch from the inside of the mold. (Just turn the arrow part with a screwdriver)

  • STOCK

  Standard Price:	1,066,462 IDR-
  Days to Ship:	1 Day(s)

• 

  Center Punch (Round Torso)

  PB SWISS TOOLS

  Round-bodied center punch using PB original special spring steel, promising high strength and a long service life.
  [Features]
  · Safe, reliable operation. Robust, standing up to brutal use. Boasts unparalleled dimensional accuracy.
  · This product with a nickel chrome plated surface is easy to grip, resistant to rust, and has a beautiful external appearance.
  · Grip has been knurled for non-slip processing.
  · Enhances work safety and economic efficiency.
  · High hardness and excellent elasticity are achieved with special alloy steel and accurate heat treatment.
  · When subjected to an excessive load, distortion is elastic and plastic, with no sudden breakages.
  [Applications]
  · Convenient for a variety of applications with stable accuracy, hardness, and toughness for commercial, industrial, and personal use.

  Standard Price:	144,924 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Parallel Pin Punch Set (Octagon Cylinder) 755

  PB SWISS TOOLS

  A set of parallel pin punches with an octagonal body made of PB original special spring steel promising a long product life.
  [Features]
  · Safe, reliable operation. Robust, standing up to brutal use. Boasts unparalleled dimensional accuracy.
  · Enhances work safety and economic efficiency.
  · This product with a nickel chrome plated surface is easy to grip, resistant to rust, and has a beautiful external appearance.
  · High hardness and excellent elasticity are achieved with special alloy steel and accurate heat treatment.
  · When subjected to an excessive load, distortion is elastic and plastic, with no sudden breakages.
  · Holder included.
  · 755B has environmentally friendly packageless specifications. Package included with 755BCN.
  [Applications]
  · Convenient for a variety of applications with stable accuracy, hardness, and toughness for commercial, industrial, and personal use.

  Standard Price:	1,529,538 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Dowel Pin Punch

  KTC(KYOTO TOOL)

  [Features]
  · A new design different from the conventional dowel pin punch.
  · The main body has a hexagonal shape that is hard to roll. Also, chucking rubber is effective for improving workability.
  [Applications]
  · Maintenance Auxiliary Tool.

  Standard Price:	159,269 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Explosion-Proof Pin Punch

  AMPCO

  Use for opening containers containing explosives or for drilling or injection into explosive cartridges.

  Standard Price:	1,107,539 IDR-
  Days to Ship:	12 Day(s) or more

• 

  For SHOWA SEIKO, Long Hole Punch

  MIERASEN

  It provides accurate drilling. Set on a dedicated punching machine, it is used for drilling slots in shaped steel / iron plates. The punch has a detent key.

  Standard Price:	4,852,308 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Belt Punch Punching Table

  TRUSCO NAKAYAMA

  [Features]
  · Punches through with a clean cut without damaging the blade.
  [Applications]
  · Underlayer when using punch.

  Standard Price:	225,327 IDR
  Days to Ship:	1 Day(s)

• 

  Parallel rainbow pin punch set with holder

  PB SWISS TOOLS

  PB Swiss tools, letter punch / punch, parallel rainbow pin punch set, with holder.

  Standard Price:	1,622,369 IDR
  Days to Ship:	Quote

• 

  Taper Punch (Octagonal Body)

  RENNSTEIG

  [Features]
  · A taper punch made using high-quality steel material.
  · It exhibits exceptional durability and high workability.
  [Applications]
  · For iron plate hole tacking, etc.

  Standard Price:	112,308 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Multi Center Punch Set

  RENNSTEIG

  [Features]
  · An adjustable multi center punch, The size of the punch can be changed within a certain range.
  · Insert the multi center punch into a hole of a standard size and then adjust the size.
  [Applications]
  · For iron plate hole tacking, etc.

  Standard Price:	6,173,846 IDR
  Days to Ship:	12 Day(s)

• 

  Multi Center Punch Replacement Pin

  RENNSTEIG

  A replacement pin for a multi center punch.

  Standard Price:	247,692 IDR
  Days to Ship:	12 Day(s)

• 

  Multi Center Punch

  RENNSTEIG

  [Features]
  · An adjustable multi center punch, The size of the punch can be changed within a certain range.
  · Insert the multi center punch into a hole of a standard size and then adjust the size.
  [Applications]
  · For iron plate hole tacking, etc.

  Standard Price:	1,969,231 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Center Punch (Octagonal Body) With Hand Guard

  RENNSTEIG

  [Features]
  · This is a center punch made using high-quality steel materials.
  · It exhibits exceptional durability and high workability.
  · The hand guard makes it easier to hold the punch and is useful to prevent injury in the case of mis-hits.
  [Applications]
  · For iron plate hole tacking, etc.

  Standard Price:	158,000 IDR
  Days to Ship:	12 Day(s)

• 

  Center Punch (Octagonal Body)

  RENNSTEIG

  [Features]
  · This is a center punch made using high-quality steel materials.
  · It exhibits exceptional durability and high workability.
  [Applications]
  · For iron plate hole tacking, etc.

  Standard Price:	90,769 IDR-
  Days to Ship:	12 Day(s)

• 

  Assembly Taper Punch

  RENNSTEIG

  [Features]
  · An assembly taper punch made using high-quality steel material.
  · It exhibits exceptional durability and high workability.
  [Applications]
  · For iron plate hole tacking, etc.

  Standard Price:	324,615 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Parallel Pin Punch Set (Octagonal Body)

  RENNSTEIG

  [Features]
  · Parallel pin punches made using high-quality steel material.
  · It exhibits exceptional durability and high workability.
  [Applications]
  · For iron plate hole tacking, etc.

  Standard Price:	952,308 IDR
  Days to Ship:	12 Day(s)

• 

  Parallel Pin Punch (Octagonal Body) With Guide Sleeve, 8-Piece Set

  RENNSTEIG

  [Features]
  · Parallel pin punch with guide sleeve, Made using high-quality steel material.
  · The sleeve part can slide.
  · It exhibits exceptional durability and high workability.

  Standard Price:	1,304,770 IDR
  Days to Ship:	12 Day(s)

Loading...