Stick Grinding Stones（Page2）

• 

  Grinding Stick: Pack of Flat Sticks with C Abrasive Grains for Finishing General Dies【10-20 Pieces Per Package】

  MISUMI

  [Specification]
  ·Stick abrasive stone for middle finish to final finishing
  ·It consumes less than WA abrasive stone and is suitable for polishing castings and press dies.

  • Volume Discount

  Standard Price:	571,302 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Grinding Stick: Pack of Flat Sticks with WA Abrasive Grains for Finishing General Dies【10-20 Pieces Per Package】

  MISUMI

  [Specification]
  ·Stick abrasive stone for middle finish to final finishing
  ·It holds sulfur strength holding power moderately and is hard to break and has excellent workability.
  ·Possible to prevent scratches on grinding wheel by attaching sulfur to pore walls of grinding wheel.

  • Volume Discount

  Standard Price:	682,858 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Grinding Stick: Pack of Flat Sticks for Medium Finishing General Dies【10-20 Pieces Per Package】

  MISUMI

  [Specification]
  ·Stick abrasive stone for middle finish to final finishing
  ·While maintaining grinding performance of general WA abrasive stones, it also has abrasive resistance.

  • Volume Discount

  Standard Price:	645,672 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Grinding Stick: Pack of Soft Flat Sticks for Polishing After Electric Discharge Machining【10-20 Pieces Per Package】

  MISUMI

  [Specification]
  ·Stick abrasive stone for middle finish to final finishing
  ·Product type: General grinding wheel

  • Volume Discount

  Standard Price:	661,954 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Grinding Stick: Pack of Hard Flat Sticks for Polishing After Electric Discharge Machining【10-20 Pieces Per Package】

  MISUMI

  [Specification]
  ·Stick abrasive stone for middle finish to final finishing
  ·Demonstrates high grinding power and does not easily break even with small-sized, difficult-to-cut materials such as electric discharge machining materials and slits.

  • Volume Discount

  Standard Price:	661,954 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Grinding Stick: Single Soft Flat Stick for Polishing After Electric Discharge Machining

  MISUMI

  [Specification]
  ·Stick abrasive stone for middle finish to final finishing
  ·Product type: General grinding wheel

  • Volume Discount

  Standard Price:	69,300 IDR-
  Days to Ship:	Same day or more

• 

  Grinding Stick: Single Hard Flat Stick for Polishing After Electric Discharge Machining

  MISUMI

  [Specification]
  ·Stick abrasive stone for middle finish to final finishing
  ·Product type: General grinding wheel

  • Volume Discount

  Standard Price:	57,918 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Grinding Stick: Pack of Flat Sticks for Air & Power Grinders【10-20 Pieces Per Package】

  MISUMI

  [Features]
  Stick abrasive stone with high grinding capacity, ideal for coarse finish.
  For air and electric grinders.
  pack.
  ·Flat type, coarse finish type
  ·Heat: 5 mm
  ·Width: 6,13,25 mm
  ·Length: 100,150 mm

  • Volume Discount

  Standard Price:	987,102 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Grinding Stick: Pack of Flat Sticks with PA Abrasive Grains for Rough Hand Finishing【10 Pieces Per Package】

  MISUMI

  [Features]
  ·Stick abrasive stone with high grinding ability.
  For rough finish.
  ·Length (mm): 150

  • Volume Discount

  Standard Price:	622,010 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Grinding Stick: Pack of Flat Sticks with C Abrasive Grains for Rough Hand Finishing【10-20 Pieces Per Package】

  MISUMI

  [Specification]
  ·Stick abrasive stone with high grinding ability.
  For rough finish.
  ·Product type: General grinding wheel

  • Volume Discount

  Standard Price:	868,785 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Grinding Stick: Single Flat Stick for Rough Finishing With Air & Power Grinders

  MISUMI

  [Features]
  Stick abrasive stone with high grinding capacity, ideal for coarse finish.
  For air and electric grinders.
  Single item.
  ·Flat type, coarse finish type
  ·Heat: 5 mm
  ·Width: 6,13,25 mm
  ·Length: 100,150 mm

  • Volume Discount

  Standard Price:	89,582 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Grinding Stick: Single Flat Stick with PA Abrasive Grains for Rough Hand Finishing

  MISUMI

  [Specification]
  ·Stick abrasive stone with high grinding ability.
  For rough finish.
  ·Length (mm): 150

  • Volume Discount

  Standard Price:	94,653 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Grinding Stick: Single Flat Stick with C Abrasive Grains for Rough Hand Finishing

  MISUMI

  [Specification]
  ·Stick abrasive stone with high grinding ability.
  For rough finish.
  ·Type: General grinding wheel

  • Volume Discount

  Standard Price:	128,458 IDR-
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Ceramic Fiber Stick, Grindstone, Flat, Granularity #120 or equivalent (Purple)

  MISUMI

  [Features]
  Flat abrasive stone developed for finishing copper and aluminum.
  [Application]
  Ideal for polishing high hardness steel up to 57 HRC and aluminum

  • Volume Discount

  Standard Price:	313,631 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Ceramic Fiber Stick, Grindstone, Flat, Granularity #220 or equivalent (Dark Brown)

  MISUMI

  [Features]
  Flat abrasive stone developed for finishing copper and aluminum.
  [Application]
  Ideal for polishing high hardness steel up to 57 HRC and aluminum

  • Volume Discount

  Standard Price:	167,334 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Ceramic Fiber Dressing Stick: Reddish-brown Flat Stick, Granularity #300 or equivalent

  MISUMI

  [Features]
  Flat abrasive stone developed for finishing copper and aluminum.
  [Application]
  Ideal for polishing high hardness steel up to 57 HRC and aluminum

  • Volume Discount

  Standard Price:	400,588 IDR
  Days to Ship:	14 Day(s) or more

• 

  Ceramic Fiber Stick, Grindstone, Flat, Granularity #600 or equivalent (Black)

  MISUMI

  [Features]
  Flat abrasive stone developed for finishing copper and aluminum.
  [Application]
  Ideal for polishing high hardness steel up to 57 HRC and aluminum

  • Volume Discount

  Standard Price:	588,205 IDR
  Days to Ship:	14 Day(s) or more

• 

  Ceramic Fiber Stick, Grindstone, Flat, Granularity #800 or equivalent (Blue)

  MISUMI

  [Features]
  Flat abrasive stone developed for finishing copper and aluminum.
  [Application]
  Ideal for polishing high hardness steel up to 57 HRC and aluminum

  • Volume Discount

  Standard Price:	601,726 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Ceramic Fiber Stick, Grindstone, Flat, Granularity #1000 or equivalent (White)

  MISUMI

  [Features]
  Flat abrasive stone developed for finishing copper and aluminum.
  [Application]
  Ideal for polishing high hardness steel up to 57 HRC and aluminum

  • Volume Discount

  Standard Price:	378,613 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Ceramic Fiber Stick, Grindstone, Flat, Granularity #1200 or equivalent (Red)

  MISUMI

  [Features]
  Flat abrasive stone developed for finishing copper and aluminum.
  [Application]
  Ideal for polishing high hardness steel up to 57 HRC and aluminum

  • Volume Discount

  Standard Price:	378,613 IDR-
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Ceramic Fiber Stick, Grindstone, Round Bar, Granularity #1200 or equivalent (Red)

  MISUMI

  [Features]
  Cylindrical rod abrasive stone developed for finishing aluminum with heat resistance of 150°C.
  [Application]
  Also ideal for polishing boss holes and gate holes.

  • Volume Discount

  Standard Price:	490,170 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Heat-Resistant Ceramic Fiber Stick, Grindstone, Flat, Granularity #120 or Equivalent (Purple)

  MISUMI

  [Features]
  Flat abrasive stone with heat resistance of 200°C and can be used for a long time.
  [Application]
  Ideal for ultrasonic tools and electric tools.

  • Volume Discount

  Standard Price:	320,582 IDR
  Days to Ship:	8 Day(s) or more

• 

  Heat-Resistant Ceramic Fiber Stick, Grindstone, Flat, Granularity #220 or Equivalent (Dark Brown)

  MISUMI

  [Features]
  Flat abrasive stone with heat resistance of 200°C and can be used for a long time.
  [Application]
  Ideal for ultrasonic tools and electric tools.

  • Volume Discount

  Standard Price:	652,434 IDR
  Days to Ship:	8 Day(s) or more

• 

  A variation of the Regular Dressing Stick【5 Pieces Per Package】

  MISUMI

  [Features]
  ·Suitable for angled and curved surfaces.
  ·Ideal for pre-process of mirror finish.

  • Volume Discount

  Standard Price:	467,991 IDR-
  Days to Ship:	8 Day(s) or more

• 

  XEBEC Meister Finish, Pencil Holder

  XEBEC TECHNOLOGY

  XEBEC Meister finish can be used with a marking pencil. It can be used right up to the end without breaking.
  
  [Features]
  · Meister finish (tough, sharp, good finish) can be used with a drawing pencil.
  · Workpieces with hardness below HRC 57 can be polished beautifully and efficiently.
  · Optimal for polishing engraved parts of molds and narrow areas.
  · Pencil types compatible with pencil holder: PCL-5: AR-0505S and AB-0505S, PCL-9: AR-0909S and AB-0909S

  Standard Price:	318,000 IDR-
  Days to Ship:	8 Day(s) or more

• 

  XEBEC Elastic Grinding Stone (Flat / Round Bar)

  XEBEC TECHNOLOGY

  [Features]
  · For fine deburring and correcting fine scratches.
  · Polishing of copper electrodes or removal of fine burrs, which has always required expertise, can now be done quickly, neatly and easily.
  · Fits well to the shape.
  · Tip processing can be done easily to fit the shape.
  · It does not easily cause scratches and provides a glossier finish.
  · Removes burrs alone, without surface sag or wire formation.
  · Stable sharpness and surface roughness throughout.
  · Gum binder is used to make it soft to the touch

  Standard Price:	1,208,524 IDR
  Days to Ship:	8 Day(s) or more

• 

  XEBEC Heat-Resistant Grindstone / Heat-Resistant Ceramic Fiber Stick Grindstone (Flat Type)

  XEBEC TECHNOLOGY

  [Features]
  · No scorching. It does not soften. Efficiency on a different scale.
  · XEBEC heat-resistant grindstone can withstand temperatures of 200°C.
  · While maintaining the performance of the conventional Meister Finish (does not break or crack, superior sharpness), it has greatly improved the durability while using ultrasonic tools, allowing use for long periods.
  · Ideal for removing hardened layers after EDM.
  · Can also be used for polishing deep ribs while still extended.

  Standard Price:	175,000 IDR-
  Days to Ship:	8 Day(s) or more

• 

  CS40-4【1-5 Pieces Per Package】

  UHT

  Ceramic fiber grindstone is 40 mm long and 4 mm wide. Suitable for smooth grinding and polishing after discharge processing and polishing cutters after machining.

  Standard Price:	830,120 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Stick Holder (Grip Holder for Abrasive Stone)

  YANASE

  A grip holder for ceramic fiber grindstone.

  Standard Price:	224,667 IDR
  Days to Ship:	9 Day(s) or more

• 

  XEBEC Meister Finish, Pencil Type / Ceramic Fiber Stick Grindstone (Pencil)【3 Pieces Per Package】

  XEBEC TECHNOLOGY

  XEBEC Meister finish can be used with a marking pencil. It can be used right up to the end without breaking.
  
  [Features]
  · Meister finish (tough, sharp, good finish) can be used with a drawing pencil.
  · Workpieces with hardness below HRC 57 can be polished beautifully and efficiently.
  · Optimal for polishing engraved parts of molds and narrow areas.

  Standard Price:	856,167 IDR
  Days to Ship:	8 Day(s) or more

• 

  CS40-6【5 Pieces Per Package】

  UHT

  Ceramic fiber grindstone is 40 mm long and 6 mm wide. Suitable for smooth grinding and polishing after discharge processing and polishing cutters after machining.

  Standard Price:	1,139,872 IDR
  Days to Ship:	8 Day(s) or more

• 

  CS70-6【5 Pieces Per Package】

  UHT

  Ceramic fiber grindstone is 70 mm long and 6 mm wide. Suitable for smooth grinding and polishing after discharge processing and polishing cutters after machining.

  Standard Price:	1,914,022 IDR
  Days to Ship:	8 Day(s) or more

• 

  Cerabon

  YANASE

  YANASE-version ceramic fiber grindstone.
  
  [Features]
  · The unbreakable grindstone.
  · While it is thin and has high hardness, it does not easily break and is ideal for finishing slit details, etc.
  · The tip can be machined to match the application.
  · It can be used just as it is mounted on the chuck.
  · Abundant particle sizes for use from grinding through polishing.

  Standard Price:	353,833 IDR-
  Days to Ship:	8 Day(s) or more

• 

  UNI STONE (Ceramic Fiber Grindstone Stick)

  YANASE

  A high quality ceramic fiber grindstone that uses strictly selected raw materials.
  
  [Features]
  · The UNI Stone is a grindstone made from the highest quality ceramic for which only the most select materials are used.
  · High crystal purity delivers unrivaled high grinding performance and finishes.
  · Further, crystal bonding is strong in micron units, and high bending strength has been realized.
  · High strength (1,300 MPa): Bending strength of up to 1,300 MPa (120 to 200% increase).
  · High polishing power (double polishing efficiency): Has twice the polishing efficiency of ceramic grindstones (shortens EDM scale removal time by 50%).
  · Excellent finish (Ra = 0.4 µm) and crystal structure which is suitable for polishing (reduces cutting time by 50% up to Ra = 0.4 μm).
  

  Standard Price:	604,167 IDR
  Days to Ship:	9 Day(s) or more

• 

  CS70-4【5 Pieces Per Package】

  UHT

  Ceramic fiber grindstone is 70 mm long and 4 mm wide. Suitable for smooth grinding and polishing after discharge processing and polishing cutters after machining.

  Standard Price:	1,294,671 IDR
  Days to Ship:	8 Day(s) or more

• 

  Diamond wrapper

  TRUSCO NAKAYAMA

  [Applications]
  · Ideal for glass, ceramics, woodworking, aluminum, copper and plastic, stone processing.

  • STOCK

  Standard Price:	138,615 IDR-
  Days to Ship:	1 Day(s)

• 

  Diamond Hand Polisher

  TRUSCO NAKAYAMA

  [Features]
  · No directionality. It can be polished from any direction be it forward, backward, left or right.
  · Capable of polishing any hard material with ease.
  [Applications]
  · Polishing of carbide, forged steel, ceramics, glass, chisels, hard rubber and the like.
  · Polishing of hard materials such as reinforced plastic.

  • STOCK

  Standard Price:	162,143 IDR
  Days to Ship:	13 Day(s)

• 

  Chip stone

  TRUSCO NAKAYAMA

  [Features]
  · Quick and easy to grind with high accuracy, omitting efforts for surface adjustment. The flat surface can be maintained all the time with no uneven finish.
  [Applications]
  · Ceramics, glass, hard-to-cut materials polishing such as grinding chips.

  Standard Price:	712,308 IDR-
  Days to Ship:	12 Day(s)

• 

  Metal Mold Grindstone PA【5-10 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Optimal for dry uses such as a press mold.
  · PA (pink alundum) abrasive grains are used for excellent grinding power.
  [Applications]
  · Polishing work for press mold.
  · Mechanical machining finish.

  • STOCK

  Standard Price:	868,462 IDR-
  Days to Ship:	1 Day(s)

• 

  New Super Stone (Flat Plate) 100 mm, No. 1000

  NIHON GC KOGYO

  This can of course be used without reshaping it, and can also be cut to suit the intended use by using wire cutters, pliers, etc. Also mountable with a dedicated stone holder, reciprocating saw, ultrasonic polishing machine, etc.

  Standard Price:	175,000 IDR-
  Days to Ship:	9 Day(s) or more

• 

  New Super Stone (Flat Plate) 100 mm, No. 1200

  NIHON GC KOGYO

  This can of course be used without reshaping it, and can also be cut to suit the intended use by using wire cutters, pliers, etc. Also mountable with a dedicated stone holder, reciprocating saw, ultrasonic polishing machine, etc.

  Standard Price:	175,000 IDR-
  Days to Ship:	9 Day(s) or more

• 

  New Super Stone (Flat Plate) 100 mm, No. 120

  NIHON GC KOGYO

  This can of course be used without reshaping it, and can also be cut to suit the intended use by using wire cutters, pliers, etc. Also mountable with a dedicated stone holder, reciprocating saw, ultrasonic polishing machine, etc.

  Standard Price:	175,000 IDR-
  Days to Ship:	9 Day(s) or more

• 

  New Super Stone (Flat Plate) 100 mm, No. 180

  NIHON GC KOGYO

  This can of course be used without reshaping it, and can also be cut to suit the intended use by using wire cutters, pliers, etc. Also mountable with a dedicated stone holder, reciprocating saw, ultrasonic polishing machine, etc.

  Standard Price:	175,000 IDR-
  Days to Ship:	11 Day(s) or more

• 

  New Super Stone (Flat Plate) 100 mm, No. 300

  NIHON GC KOGYO

  This can of course be used without reshaping it, and can also be cut to suit the intended use by using wire cutters, pliers, etc. Also mountable with a dedicated stone holder, reciprocating saw, ultrasonic polishing machine, etc.

  Standard Price:	175,000 IDR-
  Days to Ship:	9 Day(s) or more

• 

  New Super Stone (Flat Plate) 100 mm, No. 400

  NIHON GC KOGYO

  This can of course be used without reshaping it, and can also be cut to suit the intended use by using wire cutters, pliers, etc. Also mountable with a dedicated stone holder, reciprocating saw, ultrasonic polishing machine, etc.

  Standard Price:	175,000 IDR-
  Days to Ship:	9 Day(s) or more

Loading...