Vernier Calipers（Page2）

• 

  Vernier Calipers

  KTC(KYOTO TOOL)

  [Features]
  · Adopts long vernier for easy reading.
  · Gradation surface is stepped to prevent particles from entering the drive portion.

  Standard Price:	1,090,972 IDR-
  Days to Ship:	8 Day(s)

• 

  Inside Digital Calipers Knife-Edge Type

  NIIGATA SEIKI (SK)

  Features narrow jaws for a wider measurement range.
  [Features]
  · Compatible with Bluetooth Box (sold separately.)
  · Includes a hold function and an auto-OFF function (approximately 20 minutes.)
  [Applications]
  · For inside measurement.
  [Power source]
  · Includes a single CR2032 (lithium battery) for testing

  Standard Price:	8,564,615 IDR
  Days to Ship:	Quote

• 

  Digital calipers solar panel

  SHINWASOKUTEI

  Vernier calipers which reduce battery consumption with 2-way power source type (solar panels/lithium batteries) for various dimensional measurements.
  [Features]
  · Uses stainless steel jaw.
  · Achieves high accuracy of ±0.03 mm.
  · Solar panel is activated to reduce battery consumption when ambient illumination is 200 lx or more.
  · With zero setting function to enable relative measurements and indirect measurements.
  [Applications]
  · Convenient for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.
  · The minimum read value is 0.01 mm, ideal for extremely precise work.

  • STOCK

  Standard Price:	1,048,462 IDR-
  Days to Ship:	1 Day(s)

• 

  [Kanon] Digital Blade Caliper E-BL

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the gap between grooves for narrow grooved workpieces.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring the gap between grooves for narrow workpieces.

  Standard Price:	11,241,538 IDR
  Days to Ship:	Quote

• 

  Digital Caliper 16EWR

  MAHR

  Standard Price:	4,178,000 IDR
  Days to Ship:	12 Day(s)

• 

  [Kanon] ULJ Caliper with Judgment Function

  NAKAMURASEISAKU

  [Features]
  · "Judgment function" allows pass/fail to be determined instantly.
  · When dividing go/no-go products for mass production parts, work time can be significantly reduced.
  · By setting the acceptance criteria for the measured workpiece in advance, the OK/NG display can be checked instantaneously on the panel.
  · Anyone can make measurements, simply and quickly.
  · The flat head tip perfectly contacts complex shapes that had been difficult to measure with conventional calipers, allowing end face measurement without stress

  Standard Price:	2,172,450 IDR
  Days to Ship:	9 Day(s) or more

• 

  [Kanon] Centerline Caliper E-RX

  NAKAMURASEISAKU

  [Features]
  · The pitch of circular holes can be measured by direct reading.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring at various machining sites.

  • STOCK

  Standard Price:	16,101,538 IDR
  Days to Ship:	1 Day(s)

• 

  [Kanon] Centerline Caliper RM-DX

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter.
  · Capable of measuring pitches "between 2 equal-diameter holes" and from end surface to hole

  • STOCK

  Standard Price:	7,673,775 IDR-
  Days to Ship:	1 Day(s) or more

• 

  [Kanon] Centerline Caliper RM-2

  NAKAMURASEISAKU

  [Features]
  · Ideal for pitch measurement of holes with different diameters.
  · Round hole pitch calipers of “offset type," with main scale probe moving vertically.
  · Since the measuring element of the main scale moves vertically, it possible to measure not only same-diameter holes but also the pitch between different diameter holes.

  Standard Price:	10,272,600 IDR-
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Centerline Caliper RM-S

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch of small diameter holes.
  · Round-hole pitch calipers ideal for measuring "small-diameter holes and narrow pitch"

  Standard Price:	8,172,812 IDR
  Days to Ship:	25 Day(s) or more

• 

  [Kanon] Centerline Caliper E-RM60B

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter on a long workpiece.
  · Large digital calipers with a "measurement length of 600 mm" ideal for equal diameter hole measurements with long workpieces.
  · Long calipers which can measure the pitch between 2 holes of the same diameter and the distance between the edge and the hole center.
  · A dedicated gauge block is supplied as an accessory.
  · Printer output function included

  Standard Price:	24,646,251 IDR
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Standard Calipers SM

  NAKAMURASEISAKU

  Mini Calipers and Standard Long Calipers
  
  [Features]
  · Standard vernier calipers for regular measurements.
  · Standard scale type calipers with "green lines" that don't tire the eyes

  Standard Price:	670,798 IDR-
  Days to Ship:	8 Day(s) or more

• 

  [Kanon] Standard Calipers M-60P

  NAKAMURASEISAKU

  [Features]
  · Standard vernier calipers for regular measurements.
  · Lightweight calipers which, despite a long measurement length, can be held comfortably in one hand.
  · Reasonably priced too

  Standard Price:	5,884,457 IDR
  Days to Ship:	9 Day(s) or more

• 

  [Kanon] Caliper with Curre Jaw RA

  NAKAMURASEISAKU

  [Features]
  · Made of stainless steel (SUS420J2).
  · Ideal for measurements of workpieces that cannot be measured with straight jaws, such as outside measurements of dimples and internal measurements in pockets.
  [Applications]
  · For measurements of workpieces that cannot be measured with straight jaws, such as outside measurements of dimples and internal measurements in deep pockets.

  Standard Price:	10,684,615 IDR-
  Days to Ship:	1 Day(s) or more

• 

  [Kanon] Caliper for Narrow Spaces ROBA

  NAKAMURASEISAKU

  [Features]
  · The length of the inside and outside jaws is larger than that of the standard product.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For internal/external measurements in narrow/deep places.

  Standard Price:	7,661,542 IDR-
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Vernier Caliper For Inside Measurement E-ICM-J

  NAKAMURASEISAKU

  [Features]
  · Ideal for internal measurements in deep places.
  · Inside calipers with a "long-narrow jaw" ideal for inner depth measurements.
  · Long and thin jaw is ideal for internal measurements in deep holes.
  · A digital direct reading type

  Standard Price:	7,635,045 IDR
  Days to Ship:	9 Day(s) or more

• 

  [Kanon] Short Leg Caliper SBM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring machining steps within holes.
  · "Short-leg jaw" is shaped to make measuring the stepped sections in holes easier.
  · Has a short jaw ideal for measurement for deep hole groove processing

  Standard Price:	8,024,910 IDR-
  Days to Ship:	10 Day(s) or more

• 

  [Kanon] Caliper E-PEAK

  NAKAMURASEISAKU

  [Features]
  · Evolution of calipers (leading to reduced measurement time and labor saving).
  · Automatically retains the maximum and minimum values.
  · The maximum value mode (Max) is useful for measuring inner diameters. The E-PEAK calipers automatically hold the maximum value of the inner diameter.
  · Minimum value mode is convenient for outer diameter measurements in hard-to-see places. E-PEAK calipers automatically maintain the minimum value of the outer diameter.

  • STOCK

  Standard Price:	1,432,273 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Vernier Caliper, Drip-proof Stainless Steel Digital Caliper

  A&D

  Easily usable drip-proof stainless steel vernier calipers with a drip-proof structure and a large liquid crystal display.
  [Features]
  · High speed response (maximum response speed: 3 m/s).
  · Smooth and sliding, with no surface irregularities.
  · Drip-proof structure IP54 (normal operation even when wet if wiped dry).
  · Equipped with data hold function and auto power off function.
  · Comes with a thumb roller that allows fine adjustment.
  [Applications]
  · For inspection work, design measurements, civil engineer measurements, etc.
  · For agriculture and fishery.

  Standard Price:	1,420,612 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Flat Calipers Pocket

  SHINWASOKUTEI

  Calipers used for various dimensional measurements.
  [Features]
  · Lightweight, compact, and easy to carry.
  · With a strap hole.
  · Made of sturdy polycarbonate resin which contracts and expands very little with fluctuations in temperature.
  · No concern needed about scratching the measured object or generation of rust.
  [Applications]
  · Ideal for outer diameter measurement, inner diameter measurement, depth measurement, and step measurement.

  • STOCK

  Standard Price:	97,950 IDR-
  Days to Ship:	1 Day(s)

• 

  Vernier caliper with product certificate (product body and JCSS calibration certificate)

  SHINWASOKUTEI

  Four measurements possible: outer diameter, inner diameter, depth, and step measurement. A standard type vernier caliper that is easy to use.

  Standard Price:	1,843,748 IDR-
  Days to Ship:	25 Day(s) or more

• 

  Free-Stage Scale GVC-15KD/20KD/30KD

  NIIGATA SEIKI (SK)

  Calipers with stepped graduations, using Vernier scale decimal points that are easy to directly read together with the main scale.
  [Features]
  · The new design of the stepped scale prevents erroneous reading.
  · Continuous numbering + 2 mm point scale, so numerical values can immediately be grasped.
  · A stepped scale with easy-to-see 1 mm graduations has been adopted for the main scale.
  · The Vernier scale decimal points are easy to read directly together with the main scale.
  [Applications]
  · Used for measuring outside, inside, level difference and depth.

  Standard Price:	958,500 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Free-Stage Scale GVC-15KDS

  NIIGATA SEIKI (SK)

  The stepped scale on the calipers improves visibility and design and prevents erroneous reading.
  [Features]
  · The main scale is a stepped scale type with easy-to-see 1 mm graduations.
  · Continuous numbering + 2 mm point scale specifications, so numerical values can immediately be grasped.
  · The Vernier scale decimal points are easy to read directly together with the main scale.
  · The main scale features an improved design with colored numbers for better visibility.
  [Applications]
  · Used for measuring outer diameter, inner diameter, level difference and depth.

  Standard Price:	1,196,911 IDR
  Days to Ship:	11 Day(s) or more

• 

  Nogicon

  NIIGATA SEIKI (SK)

  Convenient caliper that enables high precision scribing.
  [Features]
  · Attach to standard calipers for use as precision scribing calipers.
  · Attaches to the jaws of calipers to enable highly accurate scribing.
  [Applications]
  · Mounted to calipers for use as a scribing tool.

  Standard Price:	1,092,208 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Digital Round Hole Pitch Gun

  NAKAMURASEISAKU

  An excellent product with a digital display that can be read from an overhead view (looking down from above).
  [Features]
  · Optimal for measuring the pitch of circular holes. Direct-reading type.
  [Applications]
  · For measurement at various drilling sites.
  [Material]
  · Stainless steel (SUS420J2)

  Standard Price:	29,446,154 IDR
  Days to Ship:	12 Day(s)

• 

  Slide Caliper EA725BC-4

  ESCO

  【Product Specifications】
  ・Stainless steel
  ・Minimum scale-0.05mm
  ・Measurement range-150mm

  Standard Price:	1,353,170 IDR
  Days to Ship:	8 Day(s) or more

• 

  [With Fine Control] Precision Slide Caliper EA725BE-12

  ESCO

  【Product Specifications】
  ・Minimum scale-0.05mm
  ・Stainless steel (chrome plating)
  ・With fine travel control
  ・With wooden case
  ・Range…300mm
  ・Jaw L…100mm
  ・Accuracy…±50μm

  Standard Price:	4,126,521 IDR
  Days to Ship:	8 Day(s) or more

• 

  300 mm, Digital Vernier Calipers, EA725D-4B

  ESCO

  【Product Specifications】
  ・Function-Zero reset, auto power off, datahold
  ・With depth bar
  ・Power supply-CR2032x1 pc (included)
  ・Material-Jaw・main scale： stainless steel (SUS420J2 equivalent), the display unit： ABS resin
  ・With Plastic case
  ・Maximum readings-300mm
  ・Minimum division(mm)-0.01
  ・Jaw length(mm)-60
  ・Accuracy-±0.04mm
  ・Length-390mm
  ・Weight-274g
  ・Comparative measurements and indirect measurements are possible.
  ・With thumb roller, which allows slight adjustment by rolling it.
  ・Accessories-battery(for monitor), manual, plastic case, performance inspection certificate

  Standard Price:	1,992,022 IDR
  Days to Ship:	8 Day(s) or more

• 

  Silver M Type Caliper with Fine Movement Speed

  NIIGATA SEIKI (SK)

  [Features]
  · Convenient for quantity inspection measurement of equivalent sizes.

  Standard Price:	1,029,961 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Connection Cable 1m (For CD-S15c・S20c)

  AS ONE

  【Product Specifications】
  ・Model number： 959149
  ・Size (mm)： Connection cable 1m (for CD-S15C・S20C)
  ・For DOS/V

  Standard Price:	546,249 IDR
  Days to Ship:	8 Day(s) or more

• 

  Vernier Caliper, Connection Cable 1 m (For MDC-25 mJ・ 50 mJ)

  AS ONE

  【Product Specifications】
  ・Model number： 05CZA662
  ・Type： Connection cable 1m (for MDC-25MJ・50MJ)
  ・For DOS/V

  Standard Price:	766,260 IDR
  Days to Ship:	8 Day(s) or more

• 

  Connection Cable 2m (For MDC-25 MJ・50mJ)

  AS ONE

  【Product Specifications】
  ・Model number： 05CZA663
  ・Type： Connection cable 2m (for MDC-25MJ・50MJ)
  ・For DOS/V

  Standard Price:	986,272 IDR
  Days to Ship:	15 Day(s) or more

• 

  Foot Switch FS18 for Minitor Jet II

  AS ONE

  Foot Switch FS18 for Minitor Jet II
  [Part Number]FS18
  ON/OFF Foot Switch

  Standard Price:	984,676 IDR
  Days to Ship:	8 Day(s) or more

• 

  M type standard caliper GVC series

  AS ONE

  【Product Specifications】
  ・Maximum measured value (mm)： 200
  ・Model number： GVC-20KD

  Days to Ship:	19 Day(s) or more

• 

  Digital Caliper

  MURATEC KDS

  Standard Price:	1,395,385 IDR-
  Days to Ship:	12 Day(s)

• 

  Caliper Attachment

  NIIGATA SEIKI (SK)

  Standard Price:	4,220,924 IDR
  Days to Ship:	12 Day(s)

• 

  Caliper for Left hand

  NIIGATA SEIKI (SK)

  Standard Price:	1,880,616 IDR
  Days to Ship:	Quote

• 

  Digital Caliper for Left hand

  NIIGATA SEIKI (SK)

  Standard Price:	3,332,770 IDR
  Days to Ship:	12 Day(s)

• 

  DIGITAL CALIPER WITH CARBIDE TIPPED MEASURING FACES

  NIIGATA SEIKI (SK)

  Standard Price:	3,284,770 IDR-
  Days to Ship:	12 Day(s) or more

• 

  LR type Vernier Caliper

  NIIGATA SEIKI (SK)

  Standard Price:	1,673,846 IDR-
  Days to Ship:	12 Day(s)

• 

  Plastics Caliper

  NIIGATA SEIKI (SK)

  Standard Price:	153,846 IDR
  Days to Ship:	1 Day(s)

• 

  Scribing Gauges

  NIIGATA SEIKI (SK)

  Standard Price:	3,417,231 IDR-
  Days to Ship:	12 Day(s)

• 

  SK Bluetooth Box

  NIIGATA SEIKI (SK)

  Standard Price:	6,480,154 IDR
  Days to Ship:	12 Day(s)

• 

  Vernier Caliper TVC

  NIIGATA SEIKI (SK)

  Standard Price:	20,687,231 IDR
  Days to Ship:	30 Day(s)

• 

  Vernier Caliper

  MAHR

  Standard Price:	794,308 IDR-
  Days to Ship:	20 Day(s)

Loading...