Civil Works / Carpentry Components

• • On Sale Till 31/03/2025

  

  Internal Cone Driven Anchor CT Anchor (Boxed Type), Made of Steel

  SANKO TECHNO

  Standard Price:	5,317 IDR-
  	Special Price
  Days to Ship:	Same day

• 

  Fastening Anchor "Torque Converter Anchor" (Wedge Type, for Installing Suspended Articles)

  SANKO TECHNO

  Standard Price:	32,861 IDR
  Days to Ship:	9 Day(s) or more

• 

  General Purpose Board Anchor "Iron Tip 3/8" Hex" (Screw-In Type, Plastic)

  HIT

  [Features]
  · Combination type that supports 3 mm to 6 mm screw thicknesses and can be used regardless of the board thickness.
  · Works with thin veneer and calcium silicate boards (3 mm to 5 mm in thickness).
  · Tip is steel for excellent bite.
  [Applications]
  · For gypsum boards.

  Standard Price:	1,060,000 IDR
  Days to Ship:	1 Day(s)

• 

  Internal Cone Driven Anchor CT Anchor (Boxed Type), Made of Stainless Steel

  SANKO TECHNO

  It is made of stainless steel and is ideal for construction sites that require corrosion resistance. You can confirm the completion of construction by using the dedicated hand holder. For electrical installation work, plumbing work, air conditioning duct work, etc.

  Standard Price:	23,982 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Anchoring "Board Fastener" for Hollow Walls (Clamp Anchor Type, Small Capacity Type)

  TRUSCO NAKAYAMA

  Screws are freely attached or removed, for simple implementation and an even finish. Suitable for installation of lighting fixtures, acoustic equipment and shelf brackets on hollow walls.

  Standard Price:	115,231 IDR-
  Days to Ship:	1 Day(s)

• 

  Anchoring T Lock for Hollow Walls (Clamp Anchor Type)

  UNIKA

  [Features]
  · Because the diameter of the main body and width of the plate are the same, hole drilling and anchoring can be performed after installing fixtures.
  [Applications]
  · For mounting fixtures, instruments, handrails, etc.
  [Material]
  · Steel

  Standard Price:	18,462 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Post-Construction Anchor Non-Destructive Testing Machine Techno Tester, Maximum Load (kN) 20

  SANKO TECHNO

  Can test up to 20 kN with simple operation. Practical specification supports virtually all sizes of metal expansion anchors. Non-destructive simple-type tension tester. Non-destructive simple tension tester.

  Standard Price:	21,420,479 IDR
  Days to Ship:	11 Day(s) or more

• 

  Post-Construction Anchor Non-Destructive Testing Machine Techno Tester, Maximum Load (kN) 6

  SANKO TECHNO

  Simple, confirmable, and ultra lightweight. Tests can be performed up to 6 kN load. A testing machine that eliminates difficult operations and is easy to use with a simple design consisting of just the minimal necessary functions, great for administrators of construction equipment sites. Small diameter (M12 W1/2 and smaller) post-construction anchor and lightweight materials fastener non-destructive simple tensile tester.

  Standard Price:	17,642,507 IDR
  Days to Ship:	11 Day(s) or more

• 

  P-Less Anchor (Screw Fixing Type Panhead with Washer)

  SANKO TECHNO

  Standard Price:	152,923 IDR-
  Days to Ship:	1 Day(s)

• 

  Anchor Board Fastener for Hollow Walls, Fixed Scissors Type M4–M5

  SANKO TECHNO

  [Features]
  · Screws are freely attached or removed, for simple implementation and an even finish.
  [Applications]
  · Suitable for installation of lighting fixtures and shelf brackets on hollow walls.

  Standard Price:	540,769 IDR
  Days to Ship:	1 Day(s)

• 

  Core Rod Driving Anchor, Screw Anchor, Steel M6–M12 / W3/8–W1/2

  TRUSCO NAKAYAMA

  Easy installation just by setting the anchor in the concrete hole and hammering the core rod.
  [Features]
  · Makes it clear at a glance when construction is complete, and can be used to manage construction.
  · Can be constructed directly from on top of mounted item.
  · Since the body diameter and the nominal diameter of the screw are the same, the perforation diameter can be kept small.
  [Applications]
  · Handrail mounting.
  · Fence strut mounting.
  · For fixing brackets.
  · For installing equipment mounting base.
  · Fixation of racks.

  Standard Price:	211,077 IDR-
  Days to Ship:	1 Day(s)

• 

  Board Tap, Screw Type, Zinc Alloy Die Cast, 1 Pack (10)

  TRUSCO NAKAYAMA

  Simple construction that can be tightened just with a screwdriver. Ideal for GL method as well. For Gypsum Board / Plywood / Calcium Silicate Board (8 mm or less). Ideal for GL method as well.

  Standard Price:	195,846 IDR
  Days to Ship:	1 Day(s)

• 

  Board Tap, Screw Type, Plastic, 1 Pack (10)

  TRUSCO NAKAYAMA

  Simple construction that can be tightened just with a screwdriver. Ideal for GL method as well. For gypsum board.

  Standard Price:	207,846 IDR
  Days to Ship:	1 Day(s)

• 

  Anchoring "IT Hanger" for Hollow Walls (Clamp Anchor Type)

  TRUSCO NAKAYAMA

  The screw body and roll plate have the same diameter, and installation of mounted equipment and objects can be performed as is. For hollow walls. Bracket Closure. For hollow walls.

  Standard Price:	249,385 IDR
  Days to Ship:	1 Day(s)

• 

  Anchoring "Board Fastener" for Hollow Walls (Clamp Anchor Type, L Shape Hook, Small Capacity Type)

  TRUSCO NAKAYAMA

  Screws are freely attached or removed, for simple implementation and an even finish. Suitable for installation of lighting fixtures and shelf brackets on hollow walls.

  Standard Price:	127,077 IDR
  Days to Ship:	1 Day(s)

• 

  Anchoring "Board Fastener" for Hollow Walls (Clamp Anchor Type, C Shape Hook, Small Capacity Type)

  TRUSCO NAKAYAMA

  This is an 8-pack product that is useful for small quantities. Screws are freely attached or removed, for simple implementation and an even finish. Suitable for installation of lighting fixtures and shelf brackets on hollow walls.

  Standard Price:	127,077 IDR
  Days to Ship:	1 Day(s)

• 

  Anchoring "Board Fastener" for Hollow Walls (Clamp Anchor Type, Round Hook, Small Capacity Type)

  TRUSCO NAKAYAMA

  This is an 8-pack product that is useful for small quantities. Screws are freely attached or removed, for simple implementation and an even finish. Suitable for installation of lighting fixtures, acoustic equipment and shelf brackets on hollow walls.

  Standard Price:	127,077 IDR
  Days to Ship:	1 Day(s)

• 

  Anchoring "Tomera" for Hollow Walls (Clamp Anchor Type)

  TRUSCO NAKAYAMA

  Allows equipment, etc. to be attached to any wall surface. Size variations for various wall thicknesses. For mounting tools to a wall.

  Standard Price:	118,615 IDR
  Days to Ship:	1 Day(s)

• 

  Ebimongo Gypsum Anchor

  LOBTEX

  Standard Price:	816,769 IDR
  Days to Ship:	1 Day(s)

• 

  Grating Clip Spring Type

  TRUSCO NAKAYAMA

  [Features]
  · Can be used for fine types as well.
  · It is a one-touch type for insertion only.
  [Applications]
  · Prevents impacts due to pop-ups and reduces grating theft by snapping onto two adjoining gratings to connect them.

  Standard Price:	73,492 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Anchoring IT Hanger for Hollow Walls (Clamp Anchor Type), Made of Stainless Steel

  TRUSCO NAKAYAMA

  [Features]
  · The screw body and roll plate have the same diameter, and installation of mounted equipment and objects can be performed as is.
  · For hollow walls.
  [Applications]
  · Bracket Closure.
  · For hollow walls.

  Standard Price:	285,692 IDR
  Days to Ship:	1 Day(s)

• 

  Core Rod Driving Anchor, Screw Anchor, Steel M8–M20

  TRUSCO NAKAYAMA

  [Features]
  · Nut-tightening type so mounted items can be removed.
  · Since implementation requires nothing more than hammering in a core bar, completion of implementation can be confirmed at a glance.
  · Since the body and threads are the same diameter, drilling into concrete can be done with a small diameter.
  · Can be constructed directly from on top of mounted item.
  [Applications]
  · For construction work, civil engineering work, electrical work, mechanical construction, etc.
  [Material]
  · Steel
  · Surface Processing: Trivalent Chromate Finish

  Standard Price:	207,846 IDR-
  Days to Ship:	1 Day(s)

• 

  Core Rod Driving Anchor, Screw Anchor, Stainless Steel M8–M20 / W1/2

  TRUSCO NAKAYAMA

  Easily installable anchor, just by setting it in the concrete hole and hammering the core rod.
  [Features]
  · Makes it clear at a glance when construction is complete, and can be used to manage construction.
  · Can be constructed directly from on top of mounted item.
  · Since the body diameter and the nominal diameter of the screw are the same, the perforation diameter can be kept small.
  [Applications]
  · Installation of handrails, fence columns, and facility frames.
  · For fixing brackets and hooks.

  Standard Price:	207,900 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Corrosion Protection Cap For All Anchor Zinc Hat 1 Pack 4 Pieces

  TRUSCO NAKAYAMA

  [Features]
  · Protects entire anchors from rusting due to the long lasting electrical corrosion inhibiting effect.
  · Maintenance cost is significantly reduced.
  · Simple construction that can be tightened just with a wrench, etc.
  [Applications]
  · Corrosion protection cap for All Anchor.
  [Material]
  · Anodic Zinc Alloy (Pure Zinc 99.995%)
  · Surface Processing: Acrylic Resin Baked Finish

  Standard Price:	111,846 IDR-
  Days to Ship:	1 Day(s)

• 

  Core Rod Driven Anchor, Routine Anchor, Steel, Trivalent Chromate Finish

  UNIKA

  Just by looking at the pin, it is possible to confirm that the drive has been completed.
  [Features]
  ·Easy work by just driving a pin, reliable construction.
  ·Since the diameter of the screw and the diameter of the anchor body are the same, it is possible to drill from the top of the equipment and install the anchor without rattling.
  ·Applicable Base Material: Concrete, stone.
  [Applications]
  ·For installation of equipment for construction work, electrical work, sanitary work, and heating and cooling work.
  ·For installation of all kinds of equipment such as signboard installation work, chair installation work, machine installation work, etc.

  Standard Price:	15,231 IDR-
  Days to Ship:	1 Day(s)

• 

  Core Rod Driven Anchor, Routine Anchor T Type, Stainless Steel

  UNIKA

  [Features]
  ·Easy and reliable construction just by driving a pin.
  ·Since the diameter of the screw and the diameter of the main body of the anchor are the same, it is possible to drill from the top of the device and install the anchor without rattling.
  ·Just by looking at the pin, it is possible to confirm that the drive has been completed.
  ·The SC type is made entirely of stainless steel to resist rust. Widely used even in humid areas.
  [Applications]
  ·Construction, electrical, sanitary, air-conditioning work, installation of signboards and chairs, machine installation work, etc.
  [Materials]
  ·Stainless steel.

  Standard Price:	1,802,491 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Main unit driving anchor, Rooty Cut, CA/CAS type, steel

  UNIKA

  Standard Price:	9,500 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Ebimongo GL Anchor (Screw-in Type, Plastic)

  LOBTEX

  Standard Price:	691,385 IDR
  Days to Ship:	1 Day(s)

• 

  Ebimongo Gypsum Anchor (Screw-in Type, Lead Alloy Diecast)

  LOBTEX

  Standard Price:	3,198,615 IDR
  Days to Ship:	1 Day(s)

• 

  Anchoring IT Hanger for Hollow Walls (for ALC, Clamp Anchor Type), Male Thread Type, Made of Stainless Steel

  SANKO TECHNO

  [Features]
  · Steady holding power can be obtained thanks to the through construction.
  · Does not damage ALC panels due to tightening/through-cutting.
  · Does not damage ALC panels due to tightening/through-cutting.
  · Spring effect provides good workability.
  · Can be installed on walls and floors.
  [Applications]
  · For ALC panels.
  · For installing distribution boards, rain gutters, etc.
  [Material]
  · Main Body: Stainless Steel (SUS304-based)
  · Plate: Stainless Steel (SUS304 Series)

  Standard Price:	136,974 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Hollow Anchor for Wall Board Anchor (Scissors Fixing Type)

  LOBTEX

  [Features]
  · Device can be mounted without furring strips or back boards for synthetic building materials/gypsum boards where nails and screws cannot be used.
  [Applications]
  · For gypsum boards and synthetic building materials.
  [Materials]
  · Steel

  Standard Price:	564,615 IDR
  Days to Ship:	1 Day(s)

• 

  Hollow wall anchor construction tool board anchor tool

  LOBTEX

  • STOCK

  Standard Price:	972,308 IDR
  Days to Ship:	1 Day(s)

• 

  Plug Bolt, Lobster Nail Plug (punching type/steel screw type)

  LOBTEX

  Standard Price:	669,231 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Hammer Drive Holder

  WAKAI

  Hammer Drive Holder
  [Features]
  The exclusive tool for hammering concrete pin not requiring pilot holes and anchors.
  [Usage]
  Installation of saddle band to concrete dirt floor and installation of lightweight materials such as draining water.
  [Specification]
  Concrete Pin Special Tool
  Number of pcs. included in pkg.: 150 Pieces Per Package
  [Materials]
  Main Body: Plastic Resin
  Screw: Steel

  Standard Price:	421,538 IDR-
  Days to Ship:	1 Day(s)

• 

  Eccentric Plug (Dish Head, Steel Screw)

  WAKAI

  [Features]
  · The screw and plug bind closely to the opposing material to create a firmly fastened feel.
  · Can be used with either hollow or non-hollow material.
  · Can also be used for blocks and mortar.
  · The combined effect of the screw and plug creates a firmly fastened feel.
  [Applications]
  · Hollow construction materials such as concrete or Asloc.
  · For mortar, blocks, hollow extruded concrete plates and ceramic siding foundations.
  [Materials]
  · Body: plastic resin
  · Screw: steel

  Standard Price:	242,000 IDR
  Days to Ship:	1 Day(s)

• 

  Eccentric Plug (Truss Head, Steel Screw)

  WAKAI

  Eccentric Plug
  [Features]
  Strong tightening feeling can be obtained by closely attaching the screw and plug to the opposite material.
  Can be used materials for both hollow and non-hollow parts.
  [Usage]
  Hollow building materials such as concrete and Asloc.
  For mortar, block, hollow extruded cement plate and pottery industry siding groundwork.
  [Specification]
  Finish: Ruspert
  SPQ: 5bags
  Head Shape: Truss
  [Materials]
  Main Body: Plastic Resin
  Screw: Steel

  Standard Price:	247,692 IDR
  Days to Ship:	1 Day(s)

• 

  Eccentric Plug (Truss Head, Stainless Steel Screw)

  WAKAI

  Eccentric Plug of truss head
  [Features]
  Strong tightening feeling can be obtained by closely attaching the screw and plug to the opposite material.
  Can be used materials for both of hollow and non-hollow parts.
  [Usage]
  Hollow building materials such as concrete and Asloc.
  For mortar, block, hollow extruded cement plate and pottery industry siding groundwork.
  [Specification]
  SPQ: 5bags
  Head Shape: Truss
  Number of pcs, included in pkg.: 75 Pieces Per Package
  [Materials]
  Main Body: Plastic Resin
  Screw: Stainless Steel, SUS410

  Standard Price:	407,692 IDR
  Days to Ship:	1 Day(s)

• 

  Nylon Plug NP Plug NAS Type (Nylon)

  UNIKA

  [Features]
  · Uses a special nylon material that eliminates concerns about rust.
  · The two-tier shape provides comfortable trigger action and reliable bite.
  [Applications]
  · Sash mounting, waterproof sheet mounting, electric appliance mounting.
  [Material]
  · Special Nylon

  Standard Price:	1,693 IDR-
  Days to Ship:	12 Day(s)

• 

  Nylon Plug, Mongo Nylon Plug MP

  LOBTEX

  Long-time bestselling nylon plug.
  [Features]
  · M-type channels, 2 fins, provides strength and stability using a unique concept for block edges.
  [Applications]
  · Ideal for mounting equipment onto concrete, ALC, tiles, mortar, blocks, bricks, etc.

  • STOCK

  Standard Price:	142,154 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Nylon Plug, Mongo Multi Plug (Made of Nylon)

  LOBTEX

  [Features]
  · A multipurpose plug that can be used for both hollow walls and concrete/ALC.
  [Applications]
  · Hollow walls, concrete and ALC.
  [Materials]
  · Nylon

  Standard Price:	235,077 IDR
  Days to Ship:	12 Day(s)

• 

  Nylon Plug, Shrimp Plug, (Made of Polypropylene)

  LOBTEX

  Environmentally-friendly anchor plug, made with dioxin-free resin.
  [Features]
  · Includes a pointed tip level for easy insertion into pilot holes.
  · The lead angle of the center of the head keeps screws straight.
  · The different plug outer diameter sizes are color-coded for easy identification.
  · Unique design prevents co-rotation, firmly securing the mounted object.
  [Applications]
  · Ideal for mounting equipment onto concrete and ALC.
  · Ideal for all kinds of mounting during electrical work / air conditioning pipe laying / interior construction work.

  • STOCK

  Standard Price:	236,923 IDR
  Days to Ship:	1 Day(s)

• 

  ALC Anchor "IT Hanger" (scissors fixed type), ITL-M type, External thread type/steel

  SANKODENSHI

  Standard Price:	66,000 IDR-
  Days to Ship:	12 Day(s)

• 

  ALC Anchor "IT Hanger" (scissors fixed type), ITL-W type, Internal thread type/steel

  SANKODENSHI

  Standard Price:	67,385 IDR-
  Days to Ship:	12 Day(s)

• 

  ALC Anchor "IT Hanger" (scissors fixed type), ITL-MS type, External thread type/stainless steel

  SANKODENSHI

  Standard Price:	227,231 IDR-
  Days to Ship:	12 Day(s)

Loading...