(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Soft Polyurethane Tubing TUS Series (Part Numbers)
- On Sale Till 31/12/2024
Extremely flexible soft polyurethane tubing.
[Features]
・ Piping in a narrow space is possible
・ Maximum operating pressure of 0.6 MPa or less (At 20°C)
(i)Caution
- For specifications and details, please refer to the catalog.
- Product pictures are representations.
Specifications Of Soft Polyurethane Tubing TUS Series
Appearance of Soft Polyurethane Tubing TUS Series (green)
Maximum operating pressure
| Nominal | TUS0425 | TUS0604 | TUS0805 | TUS1065 | TUS1208 |
|---|---|---|---|---|---|
| Outer diameter mm | 4 | 6 | 8 | 10 | 12 |
| Inner diameter (mm) | 2.5 | 4 | 5 | 6.5 | 8 |
List Of Colors
- Black (B)
- White (W)
- Red (R)
- Blue (BU)
- Yellow (Y)
- Green (G)
- Translucent (N) Note 1)
- Yellow brown (YB)
Specifications
| Fluid | Air | |||||
|---|---|---|---|---|---|---|
| Maximum operating pressure MPa | 20°C | 0.6 | ||||
| 40°C | 0.6 | |||||
| 60°C | 0.4 | |||||
| Applicable fittings | Note 3) One-touch fitting, insert fitting, miniature fitting (Hose-nipple type) | |||||
| Note 2) Minimum bending radius mm | 8 | 15 | 15 | 22 | 29 | |
| Operating temperature | -20 to +60°C (No freezing) | |||||
| Material | Polyurethane | |||||
| Tube drawing strength N (using one-touch fitting) | Without inner sleeve | 15 | 60 | 60 | 85 | 110 |
| With inner sleeve | 80 | 230 | 250 | 300 | 480 | |
Note 1) Not clear, but translucent due to material.
Note 2) The minimum bending radius is measured as shown in the figure below.
Note 3) Always use an inner sleeve (TJ series) in safety circuits or critical areas.
How to measure the minimum bending radius
Bend the tube into a U shape at a temperature of 20°C. Fix one end and close the loop gradually. Measure 2R when the tube breaks or is crushed.
Caution
- 1. Use nylon or polyurethane tubing for general industrial water, otherwise the tube may fall out or burst when the maximum operating pressure is low and surge pressure occurs.
- 2. Abnormal temperature rise caused by adiabatic compression may result in the tube bursting.
- 3. The value of the minimum bending radius is measured at a temperature of 20°C as shown in the figure above ("How to measure the minimum bending radius").
- 4. Use an inner sleeve, taking the removing force into consideration when using with one-touch fittings.
* See the manufacturer's catalog for safety information.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. D (Ø) | O.D. [Distinction] | Inner Dia. d (Ø) | I.D. [Distinction] | Color | Minimum Bending Radius (mm) | Bundle winding length (m) | Reel winding length (m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
332,928 IDR | 1 Piece(s) | Quote | 4 | ~4 | 2.5 | ~3 | [Black] Black (opaque) | - | 20 | - | ||
1,780,835 IDR | 1 Piece(s) | Quote | 4 | ~4 | 2.5 | ~3 | [Black] Black (opaque) | - | - | 100 | ||
332,928 IDR | 1 Piece(s) | Quote | 4 | ~4 | 2.5 | ~3 | [Blue] Blue (opaque) | - | 20 | - | ||
1,977,525 IDR | 1 Piece(s) | Quote | 4 | ~4 | 2.5 | ~3 | [Blue] Blue (opaque) | - | - | 100 | ||
332,928 IDR | 1 Piece(s) | Quote | 4 | ~4 | 2.5 | ~3 | [Green] Green (opaque) | - | 20 | - | ||
332,928 IDR | 1 Piece(s) | Quote | 4 | ~4 | 2.5 | ~3 | [Transparent (including non-white colors)] Translucent (Material Color) | - | 20 | - | ||
332,928 IDR | 1 Piece(s) | Quote | 4 | ~4 | 2.5 | ~3 | [Red] Red (opaque) | - | 20 | - | ||
332,928 IDR | 1 Piece(s) | Quote | 4 | ~4 | 2.5 | ~3 | [White] White | - | 20 | - | ||
370,260 IDR | 1 Piece(s) | Quote | 4 | ~4 | 2.5 | ~3 | [Yellow] Yellow (opaque) | - | 20 | - | ||
332,928 IDR | 1 Piece(s) | Quote | 4 | ~4 | 2.5 | ~3 | [Yellow] Yellow Brown | - | 20 | - | ||
497,020 IDR | 1 Piece(s) | Quote | 6 | ~6 | 4 | ~4 | [Black] Black (opaque) | 15 | 20 | - | ||
2,618,595 IDR | 1 Piece(s) | Quote | 6 | ~6 | 4 | ~4 | [Black] Black (opaque) | 15 | - | 100 | ||
497,046 IDR 469,211 IDR | 1 Piece(s) | Same day | 6 | ~6 | 4 | ~4 | [Blue] Blue (opaque) | 15 | 20 | - | ||
2,356,735 IDR | 1 Piece(s) | Quote | 6 | ~6 | 4 | ~4 | [Blue] Blue (opaque) | 15 | - | 100 | ||
497,020 IDR | 1 Piece(s) | Quote | 6 | ~6 | 4 | ~4 | [Green] Green (opaque) | 15 | 20 | - | ||
637,205 IDR | 1 Piece(s) | Quote | 6 | ~6 | 4 | ~4 | [Transparent (including non-white colors)] Translucent (Material Color) | 15 | 20 | - | ||
497,020 IDR | 1 Piece(s) | Quote | 6 | ~6 | 4 | ~4 | [Red] Red (opaque) | 15 | 20 | - | ||
497,020 IDR | 1 Piece(s) | Quote | 6 | ~6 | 4 | ~4 | [White] White | 15 | 20 | - | ||
497,020 IDR | 1 Piece(s) | Quote | 6 | ~6 | 4 | ~4 | [Yellow] Yellow (opaque) | 15 | 20 | - | ||
497,020 IDR | 1 Piece(s) | Quote | 6 | ~6 | 4 | ~4 | [Yellow] Yellow Brown | 15 | 20 | - | ||
1,055,547 IDR | 1 Piece(s) | Quote | 8 | ~8 | 5 | ~5 | [Black] Black (opaque) | 15 | 20 | - | ||
5,586,965 IDR | 1 Piece(s) | Quote | 8 | ~8 | 5 | ~5 | [Black] Black (opaque) | 15 | - | 100 | ||
1,055,547 IDR | 1 Piece(s) | Quote | 8 | ~8 | 5 | ~5 | [Blue] Blue (opaque) | 15 | 20 | - | ||
5,028,268 IDR | 1 Piece(s) | Quote | 8 | ~8 | 5 | ~5 | [Blue] Blue (opaque) | 15 | - | 100 | ||
1,055,547 IDR | 1 Piece(s) | Quote | 8 | ~8 | 5 | ~5 | [Green] Green (opaque) | 15 | 20 | - | ||
1,055,547 IDR | 1 Piece(s) | Quote | 8 | ~8 | 5 | ~5 | [Transparent (including non-white colors)] Translucent (Material Color) | 15 | 20 | - | ||
1,136,025 IDR | 1 Piece(s) | Quote | 8 | ~8 | 5 | ~5 | [Red] Red (opaque) | 15 | 20 | - | ||
1,055,547 IDR | 1 Piece(s) | Quote | 8 | ~8 | 5 | ~5 | [White] White | 15 | 20 | - | ||
1,055,547 IDR | 1 Piece(s) | Quote | 8 | ~8 | 5 | ~5 | [Yellow] Yellow (opaque) | 15 | 20 | - | ||
1,055,547 IDR | 1 Piece(s) | 40 Day(s) | 8 | ~8 | 5 | ~5 | [Yellow] Yellow Brown | 15 | 20 | - | ||
1,483,258 IDR 1,400,344 IDR | 1 Piece(s) | Same day | 10 | ~10 | 6.5 | ~7 | [Black] Black (opaque) | - | 20 | - | ||
7,038,841 IDR | 1 Piece(s) | Quote | 10 | ~10 | 6.5 | ~7 | [Black] Black (opaque) | - | - | 100 | ||
1,483,258 IDR | 1 Piece(s) | Quote | 10 | ~10 | 6.5 | ~7 | [Blue] Blue (opaque) | - | 20 | - | ||
7,038,841 IDR | 1 Piece(s) | Quote | 10 | ~10 | 6.5 | ~7 | [Blue] Blue (opaque) | - | - | 100 | ||
1,483,258 IDR | 1 Piece(s) | Quote | 10 | ~10 | 6.5 | ~7 | [Green] Green (opaque) | - | 20 | - | ||
1,483,258 IDR | 1 Piece(s) | Quote | 10 | ~10 | 6.5 | ~7 | [Transparent (including non-white colors)] Translucent (Material Color) | - | 20 | - | ||
1,483,258 IDR | 1 Piece(s) | 40 Day(s) | 10 | ~10 | 6.5 | ~7 | [Red] Red (opaque) | - | 20 | - | ||
1,483,258 IDR | 1 Piece(s) | Quote | 10 | ~10 | 6.5 | ~7 | [White] White | - | 20 | - | ||
1,483,258 IDR | 1 Piece(s) | Quote | 10 | ~10 | 6.5 | ~7 | [Yellow] Yellow (opaque) | - | 20 | - | ||
1,483,258 IDR | 1 Piece(s) | 40 Day(s) | 10 | ~10 | 6.5 | ~7 | [Yellow] Yellow Brown | - | 20 | - | ||
1,942,335 IDR | 1 Piece(s) | Quote | 12 | ~15 | 8 | ~8 | [Black] Black (opaque) | 29 | 20 | - | ||
9,239,058 IDR | 1 Piece(s) | Quote | 12 | ~15 | 8 | ~8 | [Black] Black (opaque) | 29 | - | 100 | ||
1,942,335 IDR | 1 Piece(s) | Quote | 12 | ~15 | 8 | ~8 | [Blue] Blue (opaque) | 29 | 20 | - | ||
9,239,058 IDR | 1 Piece(s) | Quote | 12 | ~15 | 8 | ~8 | [Blue] Blue (opaque) | 29 | - | 100 | ||
1,942,335 IDR | 1 Piece(s) | 40 Day(s) | 12 | ~15 | 8 | ~8 | [Green] Green (opaque) | 29 | 20 | - | ||
1,942,335 IDR | 1 Piece(s) | Quote | 12 | ~15 | 8 | ~8 | [Transparent (including non-white colors)] Translucent (Material Color) | 29 | 20 | - | ||
1,942,335 IDR | 1 Piece(s) | Quote | 12 | ~15 | 8 | ~8 | [Red] Red (opaque) | 29 | 20 | - | ||
1,942,335 IDR | 1 Piece(s) | Quote | 12 | ~15 | 8 | ~8 | [White] White | 29 | 20 | - | ||
1,942,335 IDR | 1 Piece(s) | Quote | 12 | ~15 | 8 | ~8 | [Yellow] Yellow (opaque) | 29 | 20 | - | ||
- | 1 Piece(s) | Quote | 12 | ~15 | 8 | ~8 | [Yellow] Yellow Brown | 29 | 20 | - |
Loading...
Basic Information
| Type | Straight | Cutting Service Usage | No | Material | Urethane |
|---|---|---|---|---|---|
| Applicable Fluid | Air | Operating Environment | Standard | Material, Urethane | Polyurethane |
| Maximum operating pressure(MPa) | 0.6 (at 20°C, at 40°C) | Operating temperature(°C) | -20 to +60 (Do Not Freeze) |
Specification/Dimensions
-
Outer Dia. D(Ø)
-
O.D. [Distinction]
-
Inner Dia. d(Ø)
-
I.D. [Distinction]
-
Color
- Black
- White
- Transparent (including non-white colors)
- Red
- Blue
- Yellow
- Green
- Black
-
Bundle winding length(m)
-
Reel winding length(m)
- 100
-
type
- TUS
Days to Ship
-
- All
- Same day
- 40 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：021-8990-4102 / FAX：021-8990-5803
- 8:30am - 5:30pm (Monday - Friday)
- Technical Inquiry
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy