(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 23/2/2025 sampai dengan 6:00 pada tanggal 24/2. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 23/2 to 6:00 (WIB) 24/2/2025. We apologize for the inconvenience.
  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Extra Low Speed Synchronous Motor, SMK Series (Part Numbers)

Extra Low Speed Synchronous Motor, SMK Series

Continuous rated synchronization motor capable of instant forward/reverse operation

[Features]
· Extra low-speed synchronous motors are continuous rated synchronization motors capable of instant forward/reverse operation.
· Has the same structure as a stepping motor, but because it can be easily driven with an alternating current power supply, it is also called an "AC stepping motor."
· Rotates precisely in sync with power supply frequency.
· Rotation speed does not change even if load fluctuates.
· Capacitor-run motor that can be easily run with just a capacitor (for the SMK5 type, external resistance is also required.
· Capable of continuous rated drive in both forward and reverse operation.
· Motor is capable of starting, stopping, and forward/reverse operation within 1.5 cycles of the power supply frequency (0.03 seconds if 50Hz, and 0.025 if 60Hz).
· Optimal for transport conveyors that start and stop repeatedly, etc.
· Rotates at a fixed speed even in lowering state.
· Also appropriate for elevator mechanisms and the like for which a drive with a consistent speed is desired for up/down motion
·
· Extra low-speed synchronous motors have the same structure as stepping motors and use a permanent magnet in their rotors, which gives them slight retention force even as-is.
· A relatively large retention force can be used by using a gearhead. Convenient for mounting green dampers for absorbing shock, slit panels for origin searching, etc.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

Part Number
SMK014A-A
SMK014A-B
SMK014MA-A
SMK014MA-B
SMK0A-3A
SMK0A-3B
SMK0A-3.6A
SMK0A-3.6B
SMK0A-7.5A
SMK0A-7.5B
SMK0A-9A
SMK0A-9B
SMK0A-15A
SMK0A-15B
SMK0A-18A
SMK0A-18B
SMK0A-30A
SMK0A-30B
SMK0A-36A
SMK0A-36B
SMK0A-50A
SMK0A-50B
SMK0A-60A
SMK0A-60B
SMK0A-100A
SMK0A-100B
SMK0A-120A
SMK0A-120B
SMK216A-GN
SMK216A-GNB
SMK237A-A
SMK237A-B
SMK5100A-A
SMK5100A-B
SMK5100C-A
SMK5100C-B
SMK5160A-A
SMK5160A-B
SMK550A-GN
SMK550A-GNB
SMK550C-GN
SMK550C-GNB
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipType Square Flange Dim. A
(mm)
Reduction Ratio Voltage
(V)
Shaft end shape Shaft Shape Motor Torque
(N/m)
Rotational Speed
(r/min)

1,487,035 IDR

1 Piece(s) 11 Day(s) or more Motor Unit42-100 ~ 115Round shaft typeSingle Shafts0.1460/72

1,524,839 IDR

1 Piece(s) 21 Day(s) or more Motor Unit42-100 ~ 115Round shaft typeDouble shaft0.1460/72

1,480,979 IDR

1 Piece(s) 8 Day(s) or more Motor Unit42-100 ~ 115Round shaft typeSingle Shafts0.1430/36

1,524,839 IDR

1 Piece(s) 21 Day(s) or more Motor Unit42-100 ~ 115Round shaft typeDouble shaft0.1430/36

2,458,563 IDR

1 Piece(s) 8 Day(s) or more [Set] Motor Combination423100 ~ 115Round shaft typeSingle Shafts--

2,502,423 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination423100 ~ 115Round shaft typeDouble shaft--

2,458,563 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination423.6100 ~ 115Round shaft typeSingle Shafts--

2,502,423 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination423.6100 ~ 115Round shaft typeDouble shaft--

2,458,563 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination427.5100 ~ 115Round shaft typeSingle Shafts--

2,502,423 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination427.5100 ~ 115Round shaft typeDouble shaft--

2,458,563 IDR

1 Piece(s) 24 Day(s) or more [Set] Motor Combination429100 ~ 115Round shaft typeSingle Shafts--

2,502,423 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination429100 ~ 115Round shaft typeDouble shaft--

2,554,024 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination4215100 ~ 115Round shaft typeSingle Shafts--

2,597,884 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination4215100 ~ 115Round shaft typeDouble shaft--

2,554,024 IDR

1 Piece(s) 24 Day(s) or more [Set] Motor Combination4218100 ~ 115Round shaft typeSingle Shafts--

2,597,884 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination4218100 ~ 115Round shaft typeDouble shaft--

2,659,803 IDR

1 Piece(s) 11 Day(s) or more [Set] Motor Combination4230100 ~ 115Round shaft typeSingle Shafts--

2,703,663 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination4230100 ~ 115Round shaft typeDouble shaft--

2,659,803 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination4236100 ~ 115Round shaft typeSingle Shafts--

2,703,663 IDR

1 Piece(s) 24 Day(s) or more [Set] Motor Combination4236100 ~ 115Round shaft typeDouble shaft--

2,659,803 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination4250100 ~ 115Round shaft typeSingle Shafts--

2,703,663 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination4250100 ~ 115Round shaft typeDouble shaft--

2,659,803 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination4260100 ~ 115Round shaft typeSingle Shafts--

2,703,663 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination4260100 ~ 115Round shaft typeDouble shaft--

2,796,543 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination42100100 ~ 115Round shaft typeSingle Shafts--

2,840,402 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination42100100 ~ 115Round shaft typeDouble shaft--

2,796,543 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination42120100 ~ 115Round shaft typeSingle Shafts--

2,840,402 IDR

1 Piece(s) 21 Day(s) or more [Set] Motor Combination42120100 ~ 115Round shaft typeDouble shaft--

1,573,289 IDR

1 Piece(s) 8 Day(s) or more Motor Unit60-100 ~ 115Pinion shaft typeSingle Shafts0.1660/72

1,637,893 IDR

1 Piece(s) 24 Day(s) or more Motor Unit60-100 ~ 115Pinion shaft typeDouble shaft0.1660/72

1,712,713 IDR

1 Piece(s) 8 Day(s) or more Motor Unit56.4-100 ~ 115Round shaft typeSingle Shafts0.3760/72

1,766,893 IDR

1 Piece(s) 21 Day(s) or more Motor Unit56.4-100 ~ 115Round shaft typeDouble shaft0.3760/72

2,730,645 IDR

1 Piece(s) 11 Day(s) or more Motor Unit85-100 ~ 115Round shaft typeSingle Shafts160/72

2,805,465 IDR

1 Piece(s) 21 Day(s) or more Motor Unit85-100 ~ 115Round shaft typeDouble shaft160/72

2,836,425 IDR

1 Piece(s) 21 Day(s) or more Motor Unit85-200 ~ 230Round shaft typeSingle Shafts160/72

2,911,245 IDR

1 Piece(s) 21 Day(s) or more Motor Unit85-200 ~ 230Round shaft typeDouble shaft160/72

3,998,719 IDR

1 Piece(s) 21 Day(s) or more Motor Unit85-100 ~ 115Round shaft typeSingle Shafts1.660/72

4,104,499 IDR

1 Piece(s) 21 Day(s) or more Motor Unit85-100 ~ 115Round shaft typeDouble shaft1.660/72

2,844,997 IDR

1 Piece(s) 21 Day(s) or more Motor Unit90-100 ~ 115Pinion shaft typeSingle Shafts0.560/72

2,919,817 IDR

1 Piece(s) 21 Day(s) or more Motor Unit90-100 ~ 115Pinion shaft typeDouble shaft0.560/72

2,950,777 IDR

1 Piece(s) 8 Day(s) or more Motor Unit90-200 ~ 230Pinion shaft typeSingle Shafts0.560/72

3,025,596 IDR

1 Piece(s) 21 Day(s) or more Motor Unit90-200 ~ 230Pinion shaft typeDouble shaft0.560/72

Loading...

  1. 1

Basic Information

Motor Type Extra Low Speed Synchronous Power Supply Single-phase Environment Standard
Electromagnetic Brakes, Clutches No

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)