(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

8,3 million Products, 4.200 Brands, Free Shipping,
68.800 Stock items for Same Day Shipping

8,3 Juta Produk, 4.200 Merek, Gratis Pengiriman,
68.800 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Screw-Hole-Related Tools（Screw size (Nominal)：M20）

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

82 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 15 Day(s) or Less

On Sale Till 31/03/2026

Hand Tap for General Use HT

OSG

High-speed steel hand tap.
Work material: Magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible

Volume Discount

STOCK

Standard Price:	807,000 IDR-
	Special Price
Days to Ship:	2 Day(s) or more

Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT

OSG

Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC or higher

Standard Price:	9,406,650 IDR
Days to Ship:	8 Day(s) or more

Short Spiral Fluted Taps, Deep Hole Use_S-SP

YAMAWA MFG

Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.

Standard Price:	1,040,128 IDR-
Days to Ship:	10 Day(s) or more

Spiral Tap for General Application_EX-SFT

OSG

Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.

Standard Price:	966,167 IDR-
Days to Ship:	2 Day(s) or more

Threading Round Die Series Pipe General Threading Round Die RD-H

OSG

[Specifications]
· Shape: Die
· Coating: Non-Coated
· Tool material: HSS

Standard Price:	3,538,235 IDR-
Days to Ship:	8 Day(s) or more

Model A Tap Series, Pointed Tap A-POT

OSG

Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.

Standard Price:	1,742,945 IDR-
Days to Ship:	8 Day(s) or more

SG Spiral Tap SGSP

NACHI(FUJIKOSHI)

[Features]
·Demonstrates excellent performance in various work materials, processing machines, and wide range of cutting conditions

Standard Price:	1,721,475 IDR
Days to Ship:	8 Day(s) or more

On Sale Till 31/03/2026

CPM Spiral Tap_CPM-SFT

OSG

The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC

Standard Price:	2,029,000 IDR
	Special Price
Days to Ship:	2 Day(s)

On Sale Till 31/03/2026

Model A Tap Series, Spiral Tap A-SFT

OSG

Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.

STOCK

Standard Price:	1,779,652 IDR-
	Special Price
Days to Ship:	2 Day(s) or more

Spiral Tap for Stainless Steels_EX-SUS-SFT

OSG

Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.

STOCK

Standard Price:	1,004,221 IDR-
Days to Ship:	8 Day(s) or more

Spiral Tap for General Application (with OX)_EX-H-SFT

OSG

Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.

STOCK

Standard Price:	1,020,810 IDR
Days to Ship:	2 Day(s)

Hand Tap (for Metric Screws / SKS)

TRUSCO NAKAYAMA

[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying coarse screw threads.
[Applications]
· Work materials: iron, light metals.
· For creating and modifying coarse screw threads.
[Materials]
· Low alloy steel (SKS)

STOCK

Standard Price:	880,154 IDR-
Days to Ship:	1 Day(s)

Pointed Tap Series TiN Coating TIN-POT

OSG

Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

Standard Price:	1,662,920 IDR
Days to Ship:	8 Day(s) or more

Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT

OSG

Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.

Standard Price:	2,161,993 IDR-
Days to Ship:	8 Day(s) or more

Round Die For Metric Screw

TRUSCO NAKAYAMA

[Features]
· Dimensional adjustments can be made with the adjustment screw provided.
· Can also be used to modify screw threads.
· For round dies.
[Applications]
· Work materials: iron, light metals.
· For male threading.
· Correction of coarse screw threads.

STOCK

Standard Price:	1,558,615 IDR
Days to Ship:	1 Day(s)

Spiral Fluted Taps for Aluminum_AL+SP

YAMAWA MFG

A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.
[Features]
· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.
· Stable, clean thread machining can be performed.
[Applications]
· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.
· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.

Standard Price:	2,410,726 IDR-
Days to Ship:	10 Day(s) or more

On Sale Till 31/03/2026

Threading Round Die Series Pipe General Threading Round Die RD-S

OSG

[Specifications]
· Shape: Die
· Coating: Non-Coated
· Tool material: Alloy HSS (SKS)

STOCK

Standard Price:	1,376,282 IDR-
	Special Price
Days to Ship:	8 Day(s) or more

Hand Tap Set (for Metric Screws / SKS)

TRUSCO NAKAYAMA

[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying coarse screw threads.
· Tungsten hand tap set.
[Applications]
· Work materials: iron, light metals.
· For creating and modifying coarse screw threads.
[Materials]
· Low alloy steel (SKS)

STOCK

Standard Price:	2,420,923 IDR-
Days to Ship:	1 Day(s)

On Sale Till 31/03/2026

Solid Die D for Metric Threads

YAMAWA MFG

Solid die with improved die runout precision.
[Features]
· High-speed tool steel (HSS) is adopted, realizing stable machining.
· The front surface is the surface with a marking on the chamfering.
· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.
· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
· Solves problems particular to adjustable type dies, realizing high precision screw machining.
[Applications]
· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.
· Combining with NC tooling enables machining with a MC.

Standard Price:	1,313,435 IDR-
	Special Price
Days to Ship:	10 Day(s) or more

Spiral Tap for Stainless Steel (Water Soluble Cutting Oil-Compatible) CC-SUS-SFT

OSG

Achieves female threading of stainless steel with a water-soluble cutting fluid.
Tool Material: Vanadium high-speed steel
Hole type: For blind holes
Work material: General steel / stainless steel

Standard Price:	2,061,000 IDR
Days to Ship:	8 Day(s) or more

Tungsten Carbide Straight Flutes Tap_OTT

OSG

Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.

Standard Price:	5,382,145 IDR
Days to Ship:	8 Day(s) or more

On Sale Till 31/03/2026

Pointed Tap Series, General Purpose EX-POT

OSG

For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way

STOCK

Standard Price:	945,161 IDR-
	Special Price
Days to Ship:	2 Day(s) or more

Pointed Tap for General Application (with OX)_EX-H-POT

OSG

For standard point taps, it is used when the protruding length of the screw is insufficient.

STOCK

Standard Price:	1,102,517 IDR
Days to Ship:	2 Day(s)

Carbide Taps for Light Alloys_N-CT-FC

YAMAWA MFG

A carbide tap suitable for thread machining of hard and brittle material such as cast iron.

Standard Price:	5,670,843 IDR-
Days to Ship:	10 Day(s) or more

Spiral Tap with Long Shank_A-LT-SFT

OSG

Standard Price:	2,009,239 IDR-
Days to Ship:	8 Day(s) or more

Spiral Tap for Stainless Steels with Long Shank_EX-LT-SUS-SFT

OSG

Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.

Standard Price:	1,744,313 IDR
Days to Ship:	8 Day(s) or more

Spiral Tap General Purpose, Long Shank EX-LT-SFT

OSG

For standard spiral taps, it is used when the protruding length of the screw is insufficient.

Standard Price:	1,744,313 IDR-
Days to Ship:	8 Day(s) or more

Fluteless Tap (X Performer)_S-XPF

OSG

There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.

Standard Price:	3,220,371 IDR
Days to Ship:	8 Day(s) or more

Seamless TAFLET

TANOI MFG

Rise tap with a correct bite without pitch or angle errors.

Standard Price:	2,679,492 IDR-
Days to Ship:	8 Day(s) or more

Spiral Flute Tap (SKH)

SKC

[Applications]
Can be used for tapping screw holes in stainless steel.
[Features]
This spiral flute tap can discharge chips with a coiled groove.

Standard Price:	1,431,274 IDR
Days to Ship:	10 Day(s) or more

Carbide Taps for Light Alloys_N-CT-LA

YAMAWA MFG

A carbide tap suitable for thread cutting with aluminum casting (AC), aluminum die castings (ADC), zinc die castings (ZDC), etc.

Standard Price:	7,145,975 IDR-
Days to Ship:	10 Day(s) or more

Spiral Fluted Taps for Soft Structural Steels_E-SP

YAMAWA MFG

A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).

Standard Price:	1,114,366 IDR-
Days to Ship:	10 Day(s) or more

Hand Tap (for Metric Thread)

ISHIHASHI

[Features]
· Tungsten hand tap.
· A common tap that's used in various applications.
· Economical compared to HSS.
[Applications]
· Work materials: Iron, light metal.
[Material]
· Alloy tool steel (SKS2)

Standard Price:	686,914 IDR
Days to Ship:	8 Day(s) or more

SG Point Tap SGPO

NACHI(FUJIKOSHI)

[Features]
・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.

Standard Price:	1,686,084 IDR
Days to Ship:	8 Day(s) or more

TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

MISUMI

Threading cutters that enable the high-speed stable processing are available at special prices

Volume Discount

Standard Price:	4,386,147 IDR-
Days to Ship:	8 Day(s) or more

TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)

MISUMI

[Features]
·Small diameter thread cutting from M1.4 × 0.3 (Pilot hole diameter ø1.1 mm) is possible
·Reduced cutting load due to short flute length (3 ridges)
·Enables effective thread cutting to corners of blind holes

Volume Discount

Standard Price:	7,421,911 IDR
Days to Ship:	10 Day(s) or more

MT Series High-Speed Steel Spiral Tap

MISUMI

[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.

Volume Discount

Standard Price:	561,160 IDR
Days to Ship:	8 Day(s) or more

MT Series High-Speed Steel Point Tap

MISUMI

Volume Discount

Standard Price:	549,329 IDR
Days to Ship:	8 Day(s) or more

Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT

OSG

Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.

Standard Price:	6,727,522 IDR
Days to Ship:	8 Day(s) or more

Pointed Tap TiN coated with Long Shank_TIN-LT-POT

OSG

Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.

Standard Price:	2,335,267 IDR
Days to Ship:	8 Day(s) or more

Pointed Tap for Stainless Steel use EX-SUS-POT

OSG

Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

Standard Price:	976,350 IDR-
Days to Ship:	8 Day(s) or more

Pointed Tap for Stainless Steels with Long Shank_EX-LT-SUS-POT

OSG

With excellent sharpness and durability, it is used for stainless steel through holes where poor machinability is a problem.

Standard Price:	2,121,411 IDR
Days to Ship:	8 Day(s) or more

Long Shank・General Application_EX-LT-POT

OSG

For standard point taps, it is used when the protruding length of the screw is insufficient.

Standard Price:	1,693,471 IDR-
Days to Ship:	8 Day(s) or more

LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

OSG

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.

Standard Price:	2,732,656 IDR
Days to Ship:	8 Day(s) or more

Pointed Tap for Difficult-To-Cut Materials CPM-POT

OSG

The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC

Standard Price:	1,785,124 IDR
Days to Ship:	8 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

	On Sale Till 31/03/2026							On Sale Till 31/03/2026	On Sale Till 31/03/2026								On Sale Till 31/03/2026		On Sale Till 31/03/2026			On Sale Till 31/03/2026
Brand	OSG	OSG	YAMAWA MFG	OSG	OSG	OSG	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	TRUSCO NAKAYAMA	OSG	OSG	TRUSCO NAKAYAMA	YAMAWA MFG	OSG	TRUSCO NAKAYAMA	YAMAWA MFG	OSG	OSG	OSG	OSG	YAMAWA MFG	OSG	OSG	OSG	OSG	TANOI MFG	SKC	YAMAWA MFG	YAMAWA MFG	ISHIHASHI	NACHI(FUJIKOSHI)	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Hand Tap for General Use HT	Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT	Short Spiral Fluted Taps, Deep Hole Use_S-SP	Spiral Tap for General Application_EX-SFT	Threading Round Die Series Pipe General Threading Round Die RD-H	Model A Tap Series, Pointed Tap A-POT	SG Spiral Tap SGSP	CPM Spiral Tap_CPM-SFT	Model A Tap Series, Spiral Tap A-SFT	Spiral Tap for Stainless Steels_EX-SUS-SFT	Spiral Tap for General Application (with OX)_EX-H-SFT	Hand Tap (for Metric Screws / SKS)	Pointed Tap Series TiN Coating TIN-POT	Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT	Round Die For Metric Screw	Spiral Fluted Taps for Aluminum_AL+SP	Threading Round Die Series Pipe General Threading Round Die RD-S	Hand Tap Set (for Metric Screws / SKS)	Solid Die D for Metric Threads	Spiral Tap for Stainless Steel (Water Soluble Cutting Oil-Compatible) CC-SUS-SFT	Tungsten Carbide Straight Flutes Tap_OTT	Pointed Tap Series, General Purpose EX-POT	Pointed Tap for General Application (with OX)_EX-H-POT	Carbide Taps for Light Alloys_N-CT-FC	Spiral Tap with Long Shank_A-LT-SFT	Spiral Tap for Stainless Steels with Long Shank_EX-LT-SUS-SFT	Spiral Tap General Purpose, Long Shank EX-LT-SFT	Fluteless Tap (X Performer)_S-XPF	Seamless TAFLET	Spiral Flute Tap (SKH)	Carbide Taps for Light Alloys_N-CT-LA	Spiral Fluted Taps for Soft Structural Steels_E-SP	Hand Tap (for Metric Thread)	SG Point Tap SGPO	TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads	TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)	MT Series High-Speed Steel Spiral Tap	MT Series High-Speed Steel Point Tap	Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT	Pointed Tap TiN coated with Long Shank_TIN-LT-POT	Pointed Tap for Stainless Steel use EX-SUS-POT	Pointed Tap for Stainless Steels with Long Shank_EX-LT-SUS-POT	Long Shank・General Application_EX-LT-POT	LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT	Pointed Tap for Difficult-To-Cut Materials CPM-POT
Days to Ship	2 Day(s) or more	8 Day(s) or more	10 Day(s) or more	2 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	2 Day(s)	2 Day(s) or more	8 Day(s) or more	2 Day(s)	1 Day(s)	8 Day(s) or more	8 Day(s) or more	1 Day(s)	10 Day(s) or more	8 Day(s) or more	1 Day(s)	10 Day(s) or more	8 Day(s) or more	8 Day(s) or more	2 Day(s) or more	2 Day(s)	10 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	10 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more
Specifications	STOCK								STOCK	STOCK	STOCK	STOCK			STOCK		STOCK	STOCK				STOCK	STOCK
Screw size (Nominal)	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20	M20
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
work material	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	High Hardness Steel (50-60 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Steel casting (SC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Cast Iron (FC)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	-	-	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]
Pitch (P), Number of Threading(mm)	0.5 ～ 2.5	1.5 ～ 2.5	1 ～ 2.5	1 ～ 2.5	1.5 ～ 2.5	1 ～ 2.5	2.5	1.5 ～ 2.5	1 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5	1.5 ～ 2.5	0.75 ～ 2.5	1.5 ～ 2.5	0.5 ～ 2.5	2.5	1.5 ～ 2.5	1 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	2.5	2.5	2.5	2.5	2.5	2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5	2.5	1.5 ～ 2.5	1.5 ～ 2.5	1.5 ～ 2.5
Tool Material Type	High-speed steel	Carbide	High-speed steel	Vanadium High-Speed Steel	High-speed steel	Powder high-speed steel	Alloy HSS	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	SKS	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Alloy HSS	High-speed steel	Alloy HSS	SKS	High-speed steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	High-speed steel	-	Carbide	High-speed steel	-	High-speed steel	Carbide	Carbide	Cobalt HSS	Cobalt HSS	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel
Tap Type	Hand Tap	Hand Tap	Spiral Tap	Spiral Tap	Die	Point tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Point tap	Roll tap	Die	Spiral Tap	Die	Hand Tap	Die	Spiral Tap	Hand Tap	Point tap	Point tap	Hand Tap	Spiral Tap	Spiral Tap	Spiral Tap	Roll tap	Roll tap	Spiral Tap	Hand Tap	Spiral Tap	Hand Tap	Point tap	Thread cutter	Thread cutter	Spiral Tap	Point tap	Hand Tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap
Hole type	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	-	For through hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	-	For through hole	For blind hole	-	For blind hole	-	-	-	For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	-	-	For through hole / For blind hole	For blind hole	-	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For through hole / For blind hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole
Chamfer threads (Lcf)	1.5P ～ 9P	3P	2.5P	2.5P	-	5P	2.5	3P	2.5P	2.5P	2.5P	-	5P	2P ～ 4P	-	2.5P	-	-	-	2.5P	1.5P ～ 3P	5P	5P	1.5P ～ 3P	2.5P	2.5P	2.5P	2P	1P ～ 2P	-	1.5P ～ 3P	2.5P	-	5	-	-	2.5P	5P	1.5P ～ 3P	5P	4P	4P	5P	6P	5P
Coating Type	Non-Coated	Other	-	Non-Coated	Non-Coated	Other	TiCN	Non-Coated	Other	Non-Coated	Non-Coated	Non-Coated	TiN	TiN	-	-	Non-Coated	Non-Coated	-	CrN	Non-Coated	Non-Coated	Non-Coated	-	Other	Non-Coated	Non-Coated	TiCN	TiCN	-	-	-	Non-Coated	TiCN	TiAlN	TiAlN	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated
Coating Y/N	NA	Available	NA	NA	NA	Available	Available	NA	Available	NA	NA	NA	Available	Available	-	NA	NA	NA	NA	Available	NA	NA	NA	NA	Available	NA	NA	Available	Available	-	NA	NA	-	Available	Available	Available	NA	NA	NA	Available	NA	NA	NA	Available	NA
Overall Length (L)(mm)	80 ～ 105	105	105	105	-	105	105	105	105	105	105	105	105	105	-	115 ～ 120	-	105	-	105	95 ～ 105	105	105	95 ～ 105	150 ～ 200	150	150 ～ 250	125 ～ 140	95 ～ 105	-	95 ～ 105	105	105	105	105 ～ 115	105	105	105	150	150	105	200	150 ～ 250	150	105

Configure

Specification/Dimensions

Screw size (Nominal)
CTG-54

CTG-42

CTG-36

CTG-28

CTG-22

CTG-16

No.0UN

NO.0-80UNF

NO.10

No.10

No.1UN

No.10UN

No.10UNF

No.10UNJ

S0.1

NO.1-72UNF

NO.1-64UNC

NO.10-32UNF

No.10-32UNF

NO.10-24UNC

No.10-24UNC

No.12

No.12UN

NO.12-28UNF

No.12-28UNF

NO.12-24UNC

No.12-24UNC

No.2

No.2UN

S0.2

NO.2-64UNF

No.2-64UNF

NO.2-56UNC

No.2-56UNC

No.3

No.3UN

S0.3

NO.3-56UNF

No.3-56UNF

NO.3-48UNC

No.3-48UNC

NO.4

No.4

No.4UN

S0.4

NO.4-48UNF

No.4-48UNF

NO.4-40UNC

No.4-40UNC

No.5

No.5UN

S0.5

NO.5-44UNF

No.5-44UNF

NO.5-40UNC

No.5-40UNC

No.6

No.6UN

S0.6

NO.6-40UNF

No.6-32UNC

S0.7

No.8

No.8UN

No.8UNJ

S0.8

NO.8-36UNF

No.8-36UNF

NO.8-32UNC

No.8-32UNC

S0.9

1

1UN

1UNS

G1

M1

NPS1

NPT1

NPTF1

PF1

PT1

R1

Rp1

S1

UNC1

UNF1

W1

1'-11

1-8UNC

1 1/2

1"1/2UN

G1"1/2

NPS1"1/2

NPT1"1/2

PT 1 1/2

R1"1/2

Rp1"1/2

W1"1/2

1 1/2-8UN

1 1/4

1"1/4UN

G1"1/4

NPS1"1/4

NPT1"1/4

PT 1 1/4

R1"1/4

Rp1"1/4

W1"1/4

1 1/4-8UN

1"1/8UN

G1"1/8

R1"1/8

W1"1/8

1 1/8-8UN

1"1/16UN

1/2

1/2PF

1/2UN

1/2UNJ

1/2W

G1/2

NPS1/2

NPT1/2

NPTF1/2

PT 1/2

R1/2

Rc1/2

Rp1/2

UNC1/2

UNF1/2

W1/2

1/2-20UNF

1/2-14

1/2-13UNC

1/2W12

1"3/4UN

G1"3/4

R1"3/4

Rp1"3/4

W1"3/4

1 3/4-8UN

1"3/8UN

G1"3/8

R1"3/8

W1"3/8

1 3/8-8UN

1/4

1/4UN

1/4UNF

1/4UNJ

1/4W

G1/4

NPS1/4

NPT1/4

NPTF1/4

PF1/4

PT 1/4

R1/4

Rc1/4

Rp1/4

SM1/4

UNC1/4

UNF1/4

W1/4

1/4-28UNF

1/4-20UNC

1/4-19

W1"5/8

1 5/8-8UN

M1 to 6

M1～6

W1"7/8

1 7/8-8UN

1'W8

1/8

1/8PT

G1/8

NPS1/8

NPT1/8

NPTF1/8

PF1/8

PS1/8

PT 1/8

R1/8

Rc1/8

Rp1/8

SM1/8

W1/8

1/8-28

M1 to 10

1/16

G1/16

NPS1/16

NPT1/16

R1/16

Rp1/16

M1.1

M1.2

S1.2

1.25

M1.4

S1.4

1.5

M1.6

M1.7

M1.8

2

2UN

G2

M2

M2.0

NPS2

NPT2

R2

Rp2

W2

2-8UN

G2"1/2

R2"1/2

Rp2"1/2

W2"1/4

M2 to 4.5

M2.2

M2.3

M2.5

M2.6

3M

G3

M3

M3.0

R3

Rp3

G3"1/2

R3"1/2

Rp3"1/2

3/4

3/4UN

G3/4

NPS3/4

NPT3/4

NPTF3/4

PT 3/4

R3/4

Rp3/4

UNC3/4

UNF3/4

W3/4

3/4-16UNF

3/4-14

3/4-10UNC

3/4W10

3/8

3/8-UNJ

3/8UN

3/8UNF

3/8W

G3/8

NPS3/8

NPT3/8

NPTF3/8

PF3/8

PS3/8

PT3/8

PT 3/8

R3/8

Rc3/8

Rp3/8

SM3/8

UNC3/8

UNF3/8

W3/8

3/8-24UNF

3/8-19

3/8-16UNC

3/8W16

M3 to 10

3/16

SM3/16

W3/16

SM3/32

3.5

M3.5

4

4M

G4

M4

M4.0

R4

Rp4

M4 to 6

M4 to 13

M4.5

5M

M5

M5.0

M5

5/8

5/8UN

G5/8

NPS5/8

R5/8

UNC5/8

UNF5/8

W5/8

5/8-18UNF

5/8-11UNC

5/8W11

M5 to 10

M5 to 13

5/16

5/16UN

5/16UNF

5/16UNJ

5/16W

SM5/16

UNC5/16

UNF5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

W5/32

5.5M

M5.5

6

M6

M6.0

No6-40UNF

M6 to 20

M7

PG7

7/8

7/8UN

G7/8

NPS7/8

R7/8

UNC7/8

UNF7/8

W7/8

7/8-14UNF

7/8-9UNC

7/8W9

7/16

7/16UN

7/16UNJ

SM7/16

UNC7/16

UNF7/16

W7/16

7/16-20UNF

7/16-14UNC

SM7/32

7.5

M8

9

M9

PG9

9/16

9/16UN

W9/16

9/16-18UNF

9/16-12UNC

SM9/32

9/64

SM9/64

M10

M10

M10 to 13

M10 to 25

M11

PG11

SM11/32

SM11/64

M12

M12.0

M12

M13

PG13.5

M14

M14.0

M15

SM15/64

M16

PG16

M17

M18

M19

M19 to 32

M19 to 38

M20

M21

PG21

M22

M22X

M23

M24

M24X

M25

M25X

M25 to 50

M25 to 70

M26

M27

M28

PG29

M30

M32

M33

M34

M35

M36

PG36

M38

M39

M40

M42

PG42

M44

M45

M48

M50

M52

M56

1015

1020N100M

1020N150M

06510X28R

10154

12204

12254N100M

12254N150M

12254N200M

16304N100M

16304N150M

16304N200M

16304N250M

20305

20505N100M

20505N150M

20505N200M

20505N300M

20505N350M

25506N100M

25506N150M

25506N200M

25506N300M

25506N350M

32506

32506N150M

32506N200M

32506N300M

035083N075M

035083N080M

040123N100M

060163N050M

060163N100M

060163N125M

065103X28G

075203N125M

075203N150M

080153X19G

080153X19R

080203N050M

080203N100M

090244N125M

090244N175M

100254N050M

100254N100M

100254N150M

100254N200M

120204X14G

120204X14R

120304N100M

120304N150M

120304N200M

160264X11G

160264X11R

160404N150M

160404N200M

160404N250M

200305X11G

200305X11R

200505N150M

200505N200M

200505N300M
Clear

Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Miniature
- Other
Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Pitch (P), Number of Threading(mm)
.02

0.025

0.05

0.08

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.529

0.6

0.63

0.7

0.75

0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00

0.79

0.794

0.8

0.9

0.907

0.974

1

1.058

1.25

1.27

1.5

1.75

2

2.5

3

3.5

4

4.5

5

5.5

6

7

8

9

10

10、11、12、14、16、18、20、24F

11

11 1/2

11.5

12

13

14

16

18

19

20

24

27

28

32

36

40

44

48

56

64

72

80

150
Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- SKS
Details

Clear

Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Tap for pipes
- Thread cutter
- Thread-cutting-related tool
- Die
- Tap wrench
- Modification/removal Tool
- Oil Hole Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Chamfer threads (Lcf)
1P

1.5P

2P

2.5

2.5P

3P

3.5P

4P

4.5P

5

5P

6P

7P

8P

9P

10P

11P

12P

13P

14P

16P

18P

20P

24P

28P
Drawing

Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Coating Y/N
- Available
- NA
Clear

Overall Length (L)(mm)
30

32

34

36

39

40

41.5

42

44

45

46

48

49

50

51

52

54

55

56

57

58

59

59.5

60

61

61.5

62

64

65

66

67

68

69

70

70/70/70

72

73

74

75

76

78

79

80

82

84

85

86

87

88

89

90

91

92

95

96

99

100

102

103

105

108

109

110

111

113

114

115

120

121

122

125

127

130

135

136

140

145

150

155

160

163

165

170

175

180

185

190

195

200

205

210

220

225

230

250

255

260

300

310

315

350

390

460

500

525

590

780

890

900

1000

1250
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI (4)
- Economy series (0)
- OSG (32)
- YAMAWA MFG (30)
- TRUSCO NAKAYAMA (5)
- ISHIHASHI (4)
- GUHRING (2)
- NACHI(FUJIKOSHI) (2)
- EIKOSHA (1)
- SKC (1)
- TANOI MFG (1)
- NOGA JAPAN (0)
- NS TOOL (0)
- KOKEN (0)
- NIIGATA SEIKI (SK) (0)
- NEW STRONG (0)
- SATA TOOLS (0)
- HITACHIKOKI (0)
- KO-KEN TOOL (0)
- TSUBOSAN (0)
- MITSUBISHI HITACHI TOOL (0)
- ENGINEER (0)
- RENNSTEIG (0)
- RUKO (0)
- UNION TOOL (0)
- ONISHI MANUFACTURING (0)
- SANDVIK (0)
- DC SWISS (0)
- ESCO (0)
- LIGHTSEIKI (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Screw-Hole-Related Tools

- MISUMI Home
- Cutting Tools

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Screw-Hole-Related Tools（Screw size (Nominal)：M20）

Search by specifying the lower class category

Configure

Specification/Dimensions

Screw size (Nominal)

Screw Types

work material

Pitch (P), Number of Threading(mm)

Tool Material Type

Tap Type

Hole type

Chamfer threads (Lcf)

Coating Type

Coating Y/N

Overall Length (L)(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Screw-Hole-Related Tools

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Screw-Hole-Related Tools（Screw size (Nominal)：M20）

Search by specifying the lower class category

Configure

Specification/Dimensions

Screw size (Nominal)

Screw Types

work material

Pitch (P), Number of Threading(mm)

Tool Material Type

Tap Type

Hole type

Chamfer threads (Lcf)

Coating Type

Coating Y/N

Overall Length (L)(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Screw-Hole-Related Tools

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB