(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Drill Bits(With/without Oil Hole:Available Page2)

Drill bits are a type of cutting tool to drill holes in work materials. They are used with machine tools such as drill press, lathe, milling machine and machining center. Drill bit materials include alloy carbide, high speed steel powder, high-speed steel, and some of them have coatings such as silicone-based, TiAlN-based, TiCN-based, TiN-based coatings, or surface treatment such as steam oxide treatment for enhanced oil retention on surface. Additionally, there is also a type of machining called thinning, given to the bit tip to reduce the thrust load applied to it when drilling. There are different shapes of thinning such as X-shape (for machining deep holes), R-shape (for machining stainless-steel-based workpieces) and S-shaped (for machining cast-iron- or non-ferrous-based workpieces); each one of them is used accordingly for different features and applications. In recent years, flat drill bits, which can drill holes without bending even on round surfaces, are attracting attention.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
Brand
Product Series
Days to Ship
Hole diameter (drill diameter) D(mm)
Overall Length L(mm)
Groove Length L(mm)
work material
Shank Type
Tool Material Type
With/without Oil Hole
Coating Y/N
Coating Type

    Super-Multi Drill Bit, Internal Lubrication Type, NHGS Series 5D Type

      EZ Drill (for 3D) EZDM Type

        EZ Drill (for 5D) EZDL Type

          F1 Reamer DX-DHSR Type

            TA-EZ Drill (for Bridges) TEZD-KMS Type

              TA-EZ Drill TEZD-MS Type

                EZ Drill for Heat Resistant Alloy (for 3D) EZSM Type for Drilling

                  Carbide Twisted V Drill, Long Size for Models H7-H8

                    MQL Long Drill 15 x D with Oil Hole RT100T 6509

                      MQL Long Drill 20 x D with Oil Hole RT100T 6511

                        MQL Long Drill 25 x D with Oil Hole RT100T 6512

                          MQL Long Drill 30 x D with Oil Hole RT100T 6513

                            MQL Long Drill 40 x D with Oil Hole RT100T 6514

                              End Mill Shank Drill 12 × D, with Oil Hole, RT 100 Double Margin 5525

                                End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510

                                  End Mill Shank Drill 5 × D with Oil Hole RT100U 5511

                                    End Mill Shank Drill 7 × D for Cast Iron Only RT100R 6502

                                      End Mill Shank Drill 7 x D with Oil Hole RT100U 5512

                                        End Mill Shank Drill Straight Groove Type 10 × D with Oil Hole, RT150 GG, Double Margin 5513

                                          Gun Drill 25×D EB100 5646

                                            Gun Drill 50×D EB100 5647

                                              Stainless Steel Drill 3×D RT100VA 8510

                                                Stainless Steel Drill 5×D RT100VA 8511

                                                  Straight Shank Drill Long Total Length 250 mm GT100 J694

                                                    Straight Shank Drill Long Total Length 100 mm GT100 J691

                                                      Straight Shank Drill Long Total Length 100 mm GT100 J761

                                                        Straight Shank Drill Long Total Length 150 mm GT100 J692

                                                          Straight Shank Drill Long Total Length 200 mm GT100 J693

                                                            Straight Shank Drill Long Total Length 200 mm GT100 J763

                                                              Straight Shank Drill Long Total Length 250 mm GT100 J764

                                                                Straight Shank Drill Long Total Length 300 mm GT100 J695

                                                                  Straight Shank Drill Long Total Length 300 mm GT100 J765

                                                                    Holder 1.5 x D HT800WP 4106

                                                                      Holder 1 x D HT800WP 4105

                                                                        Holder 10 x D HT800WP 4110

                                                                          Holder 3 x D HT800WP 4107

                                                                            Holder 3 x D with Oil Hole RT800WP 5242

                                                                              Holder 5 x D HT800WP 4108

                                                                                Holder 5 x D with Oil Hole RT800WP 5243

                                                                                  Holder 7 x D with Oil Hole RT800WP 5248

                                                                                    Micro Gun Drill Long G521

                                                                                      Micro Gun Drill EB100 5020

                                                                                        Micro Gun Drill EB100 5021

                                                                                          Micro Gun Drill EB100 5024

                                                                                            Micro Gun Drill EB100 5026

                                                                                            Brand

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            OMIKOGYO

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            Product Series

                                                                                            Super-Multi Drill Bit, Internal Lubrication Type, NHGS Series 5D Type

                                                                                            EZ Drill (for 3D) EZDM Type

                                                                                            EZ Drill (for 5D) EZDL Type

                                                                                            F1 Reamer DX-DHSR Type

                                                                                            TA-EZ Drill (for Bridges) TEZD-KMS Type

                                                                                            TA-EZ Drill TEZD-MS Type

                                                                                            EZ Drill for Heat Resistant Alloy (for 3D) EZSM Type for Drilling

                                                                                            Carbide Twisted V Drill, Long Size for Models H7-H8

                                                                                            MQL Long Drill 15 x D with Oil Hole RT100T 6509

                                                                                            MQL Long Drill 20 x D with Oil Hole RT100T 6511

                                                                                            MQL Long Drill 25 x D with Oil Hole RT100T 6512

                                                                                            MQL Long Drill 30 x D with Oil Hole RT100T 6513

                                                                                            MQL Long Drill 40 x D with Oil Hole RT100T 6514

                                                                                            End Mill Shank Drill 12 × D, with Oil Hole, RT 100 Double Margin 5525

                                                                                            End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510

                                                                                            End Mill Shank Drill 5 × D with Oil Hole RT100U 5511

                                                                                            End Mill Shank Drill 7 × D for Cast Iron Only RT100R 6502

                                                                                            End Mill Shank Drill 7 x D with Oil Hole RT100U 5512

                                                                                            End Mill Shank Drill Straight Groove Type 10 × D with Oil Hole, RT150 GG, Double Margin 5513

                                                                                            Gun Drill 25×D EB100 5646

                                                                                            Gun Drill 50×D EB100 5647

                                                                                            Stainless Steel Drill 3×D RT100VA 8510

                                                                                            Stainless Steel Drill 5×D RT100VA 8511

                                                                                            Straight Shank Drill Long Total Length 250 mm GT100 J694

                                                                                            Straight Shank Drill Long Total Length 100 mm GT100 J691

                                                                                            Straight Shank Drill Long Total Length 100 mm GT100 J761

                                                                                            Straight Shank Drill Long Total Length 150 mm GT100 J692

                                                                                            Straight Shank Drill Long Total Length 200 mm GT100 J693

                                                                                            Straight Shank Drill Long Total Length 200 mm GT100 J763

                                                                                            Straight Shank Drill Long Total Length 250 mm GT100 J764

                                                                                            Straight Shank Drill Long Total Length 300 mm GT100 J695

                                                                                            Straight Shank Drill Long Total Length 300 mm GT100 J765

                                                                                            Holder 1.5 x D HT800WP 4106

                                                                                            Holder 1 x D HT800WP 4105

                                                                                            Holder 10 x D HT800WP 4110

                                                                                            Holder 3 x D HT800WP 4107

                                                                                            Holder 3 x D with Oil Hole RT800WP 5242

                                                                                            Holder 5 x D HT800WP 4108

                                                                                            Holder 5 x D with Oil Hole RT800WP 5243

                                                                                            Holder 7 x D with Oil Hole RT800WP 5248

                                                                                            Micro Gun Drill Long G521

                                                                                            Micro Gun Drill EB100 5020

                                                                                            Micro Gun Drill EB100 5021

                                                                                            Micro Gun Drill EB100 5024

                                                                                            Micro Gun Drill EB100 5026

                                                                                            Days to Ship 8 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 9 Day(s) or more 9 Day(s) or more 8 Day(s) or more 12 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 26 Day(s) or more 26 Day(s) or more 10 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 26 Day(s) or more 8 Day(s) or more 8 Day(s) or more 26 Day(s) or more 26 Day(s) or more 8 Day(s) or more 26 Day(s) or more 10 Day(s) or more 26 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 26 Day(s) or more 26 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more
                                                                                            Hole diameter (drill diameter) D(mm)5.1 ~ 6.83 ~ 15.98.1 ~ 163 ~ 1224.5/24.7 ~ 26.5/26.714 ~ 323 ~ 12103 ~ 143 ~ 143 ~ 123 ~ 103 ~ 83 ~ 203 ~ 203 ~ 204 ~ 203 ~ 203 ~ 162.5 ~ 122.5 ~ 83 ~ 203 ~ 206 ~ 133 ~ 133 ~ 63 ~ 133 ~ 133 ~ 103 ~ 136 ~ 133 ~ 13--------1.2 ~ 41.2 ~ 51.5 ~ 81.2 ~ 3.21.5 ~ 5
                                                                                            Overall Length L(mm)100 ~ 10968 ~ 146127 ~ 19470 ~ 135185 ~ 195113 ~ 20668 ~ 12216595 ~ 297110 ~ 367125 ~ 386140 ~ 371170 ~ 38390 ~ 31062 ~ 13166 ~ 15375 ~ 24470 ~ 24491 ~ 260115 ~ 420185 ~ 48562 ~ 13166 ~ 15325010010015020020025030030084 ~ 19481 ~ 173182 ~ 441101 ~ 254130 ~ 231124 ~ 334166 ~ 311202 ~ 391223125 ~ 135205 ~ 22590 ~ 100165 ~ 175
                                                                                            Groove Length L(mm)44 ~ 5615 ~ 8068 ~ 12820 ~ 50100 ~ 10851 ~ 14615 ~ 6011555 ~ 24870 ~ 31885 ~ 337100 ~ 327130 ~ 34350 ~ 25820 ~ 7928 ~ 10137.5 ~ 19030 ~ 19042 ~ 20785 ~ 360155 ~ 44020 ~ 7928 ~ 1012005060100150120 ~ 140150 ~ 175250180 ~ 200----76 ~ 167-112 ~ 247148 ~ 3271608016045120
                                                                                            work materialCast Iron[○] / Aluminum[◎] / Copper[◎]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[◎]Cast Iron[○] / Aluminum[○] / Copper[○]------general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]-general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]-----Cast Iron[◎] / Aluminum[◎]Cast Iron[◎] / Aluminum[◎]Cast Iron[◎] / Aluminum[◎]Cast Iron[◎] / Aluminum[◎]Cast Iron[◎] / Aluminum[◎]Cast Iron[◎] / Aluminum[◎]Cast Iron[◎] / Aluminum[◎]Cast Iron[◎] / Aluminum[◎]Cast Iron[◎] / Aluminum[◎]general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]-----
                                                                                            Shank TypeEnd Mill ShankEnd Mill Shank / straight shankEnd Mill Shank / straight shankEnd Mill Shank / straight shankEnd Mill ShankEnd Mill Shank / straight shankEnd Mill Shank / straight shankEnd Mill Shank-----End Mill ShankEnd Mill ShankEnd Mill ShankEnd Mill ShankEnd Mill ShankEnd Mill Shank----straight shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shank-------------
                                                                                            Tool Material TypeCarbideCarbideCarbide--CarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbide--------CarbideCarbideCarbideCarbideCarbide
                                                                                            With/without Oil HoleAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailable
                                                                                            Coating Y/NAvailableAvailableAvailableAvailableAvailableAvailableAvailableNAAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableNAAvailableAvailableAvailableAvailableNANANANANANANANANANANANANANANANANANANANANANA
                                                                                            Coating TypeDLCTiCNTiCNTiCN----TiAlNTiAlNTiAlNTiAlNTiAlNOtherOtherOtherOtherOther-OtherOtherOtherOther----------------------

                                                                                            Loading...

                                                                                            Related Categories to Drill Bits