(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Drill Bits(work material:Quenched and tempered steel Page4)

Drill bits are a type of cutting tool to drill holes in work materials. They are used with machine tools such as drill press, lathe, milling machine and machining center. Drill bit materials include alloy carbide, high speed steel powder, high-speed steel, and some of them have coatings such as silicone-based, TiAlN-based, TiCN-based, TiN-based coatings, or surface treatment such as steam oxide treatment for enhanced oil retention on surface. Additionally, there is also a type of machining called thinning, given to the bit tip to reduce the thrust load applied to it when drilling. There are different shapes of thinning such as X-shape (for machining deep holes), R-shape (for machining stainless-steel-based workpieces) and S-shaped (for machining cast-iron- or non-ferrous-based workpieces); each one of them is used accordingly for different features and applications. In recent years, flat drill bits, which can drill holes without bending even on round surfaces, are attracting attention.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 7 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
Brand
Product Series
Days to Ship
Hole diameter (drill diameter) D(mm)
Overall Length L(mm)
Groove Length L(mm)
work material
Shank Type
Tool Material Type
With/without Oil Hole
Coating Y/N
Coating Type

    Solid semi-long drill

      Hi-Spec Micro Drill

        Micro Drill "NEO PRO" Short Blades

          Micro Drill "NEO PRO" Standard Blade Length

            Micro Drill 3.175 mm Shaft

              Micro Drill Standard Tip Length

                Long Drill

                  Small Diameter Spiral Flute, 1 mm Shank

                    OK Coat Carbide NC Point Drill SNPDA

                      EZ Drill (for 3D) EZDM Type

                        EZ Drill (for 5D) EZDL Type

                          F1 Reamer DX-DHSR Type

                            TA-EZ Drill TEZD-MS Type

                              TA-EZ Drill (for Bridges) TEZD-KMS Type

                                TA-EZ Drill TEZD-MS Type

                                  Sigma Drill / Hard (Long Shank) DZ-DHL Type

                                    End Mill Shank Type 3 x D RT100U 5514

                                      End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510

                                        End Mill Shank Drill 5 × D with Oil Hole RT100U 5511

                                          End Mill Shank Drill 7 x D with Oil Hole RT100U 5512

                                            End Mill Shank Drill Stub GU500 512

                                              End Mill Shank Drill Regular GU500 511

                                                Straight Shank, Light Brand Drill, 90° Chamfer Type N 540

                                                  Straight Shank Drill, 3 × D Type N 2463

                                                    Straight Shank Set 3 x D RT100U 2473

                                                      Straight Shank Set 5 x D RT100U 2474

                                                        Straight Shank Drill, 5 × D Type N 2464

                                                          Straight Shank Drill, 5 × D Type N 732

                                                            Straight Shank Drill Regular GT100 622

                                                              Straight Shank Drill Regular GT100 658

                                                                Straight Shank Drill, Regular Type GU500DZ 5519

                                                                  Straight Shank Drill, Regular Type N 305

                                                                    Straight Shank Drill, Regular Type Ti 605

                                                                      Straight Shank Drill, Regular Type Ti 657

                                                                        Straight Shank Drill, Long Type Ti 669

                                                                          Straight Shank Drill Long GT100 336

                                                                            Straight Shank Drill, Long Type N 317

                                                                              Straight Shank Drill Series 1 GT100 618

                                                                                Straight Shank Drill, Regular Type-Ti 2458

                                                                                  Tapered Shank, Subland Drill 90°, Chamfer Type N 541

                                                                                    Tapered Shank Drill, Stub GV120 363

                                                                                      Micro Drill, 15 × D, Type-N 6412

                                                                                        Micro Drill, 4 × D, Type-N 6400

                                                                                          Micro Drill, 8 × D, Type-N 6408

                                                                                            Micro Drill, Type-N 660

                                                                                            Brand

                                                                                            ATOM

                                                                                            ATOM

                                                                                            ATOM

                                                                                            ATOM

                                                                                            ATOM

                                                                                            ATOM

                                                                                            ATOM

                                                                                            ATOM

                                                                                            OKAZAKI SEIKO

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            DIJET

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            Product Series

                                                                                            Solid semi-long drill

                                                                                            Hi-Spec Micro Drill

                                                                                            Micro Drill "NEO PRO" Short Blades

                                                                                            Micro Drill "NEO PRO" Standard Blade Length

                                                                                            Micro Drill 3.175 mm Shaft

                                                                                            Micro Drill Standard Tip Length

                                                                                            Long Drill

                                                                                            Small Diameter Spiral Flute, 1 mm Shank

                                                                                            OK Coat Carbide NC Point Drill SNPDA

                                                                                            EZ Drill (for 3D) EZDM Type

                                                                                            EZ Drill (for 5D) EZDL Type

                                                                                            F1 Reamer DX-DHSR Type

                                                                                            TA-EZ Drill TEZD-MS Type

                                                                                            TA-EZ Drill (for Bridges) TEZD-KMS Type

                                                                                            TA-EZ Drill TEZD-MS Type

                                                                                            Sigma Drill / Hard (Long Shank) DZ-DHL Type

                                                                                            End Mill Shank Type 3 x D RT100U 5514

                                                                                            End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510

                                                                                            End Mill Shank Drill 5 × D with Oil Hole RT100U 5511

                                                                                            End Mill Shank Drill 7 x D with Oil Hole RT100U 5512

                                                                                            End Mill Shank Drill Stub GU500 512

                                                                                            End Mill Shank Drill Regular GU500 511

                                                                                            Straight Shank, Light Brand Drill, 90° Chamfer Type N 540

                                                                                            Straight Shank Drill, 3 × D Type N 2463

                                                                                            Straight Shank Set 3 x D RT100U 2473

                                                                                            Straight Shank Set 5 x D RT100U 2474

                                                                                            Straight Shank Drill, 5 × D Type N 2464

                                                                                            Straight Shank Drill, 5 × D Type N 732

                                                                                            Straight Shank Drill Regular GT100 622

                                                                                            Straight Shank Drill Regular GT100 658

                                                                                            Straight Shank Drill, Regular Type GU500DZ 5519

                                                                                            Straight Shank Drill, Regular Type N 305

                                                                                            Straight Shank Drill, Regular Type Ti 605

                                                                                            Straight Shank Drill, Regular Type Ti 657

                                                                                            Straight Shank Drill, Long Type Ti 669

                                                                                            Straight Shank Drill Long GT100 336

                                                                                            Straight Shank Drill, Long Type N 317

                                                                                            Straight Shank Drill Series 1 GT100 618

                                                                                            Straight Shank Drill, Regular Type-Ti 2458

                                                                                            Tapered Shank, Subland Drill 90°, Chamfer Type N 541

                                                                                            Tapered Shank Drill, Stub GV120 363

                                                                                            Micro Drill, 15 × D, Type-N 6412

                                                                                            Micro Drill, 4 × D, Type-N 6400

                                                                                            Micro Drill, 8 × D, Type-N 6408

                                                                                            Micro Drill, Type-N 660

                                                                                            Days to Ship 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 10 Day(s) or more 10 Day(s) or more 10 Day(s) or more 8 Day(s) or more 9 Day(s) or more 9 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 10 Day(s) or more 8 Day(s) or more 26 Day(s) or more 26 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 10 Day(s) or more 8 Day(s) or more 10 Day(s) or more 10 Day(s) or more 8 Day(s) or more 26 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more
                                                                                            Hole diameter (drill diameter) D(mm)0.3 ~ 130.035 ~ 1.9950.1 ~ 30.03 ~ 30.04 ~ 1.50.02 ~ 30.3 ~ 130.05 ~ 0.993 ~ 123 ~ 15.98.1 ~ 163 ~ 1214 ~ 3224.5/24.7 ~ 26.5/26.714 ~ 323.1 ~ 4.93 ~ 203 ~ 203 ~ 203 ~ 202 ~ 9.62 ~ 202.5 ~ 4.21 ~ 163 ~ 165 ~ 151 ~ 121 ~ 125.4 ~ 5.52 ~ 3.31 ~ 140.8 ~ 11.20.81.6 ~ 101 ~ 101 ~ 1213.58.5 ~ 8.87 ~ 136.8 ~ 17.58.3 ~ 331.4 ~ 31.1 ~ 2.51.4 ~ 30.16 ~ 1.9
                                                                                            Overall Length L(mm)40 ~ 14938 ~ 503838 ~ 503838 ~ 5060 ~ 2003050 ~ 11068 ~ 146127 ~ 19470 ~ 135-185 ~ 195113 ~ 20670 ~ 8562 ~ 13162 ~ 13166 ~ 15370 ~ 24444 ~ 9356 ~ 19170 ~ 9326 ~ 11546 ~ 11573 ~ 15334 ~ 15134 ~ 1519349 ~ 6534 ~ 16030 ~ 1423043 ~ 13356 ~ 18456 ~ 205214240 ~ 250109 ~ 151162 ~ 248130 ~ 26962 ~ 8747 ~ 5952 ~ 6625 ~ 30
                                                                                            Groove Length L(mm)8 ~ 700.4 ~ 220.6 ~ 120.3 ~ 250.4 ~ 100.2 ~ 2510 ~ 900.5 ~ 9.58 ~ 3015 ~ 8068 ~ 12820 ~ 50-100 ~ 10851 ~ 14625 ~ 3520 ~ 7920 ~ 7928 ~ 10130 ~ 19012 ~ 4324 ~ 12539 ~ 576 ~ 5816 ~ 5834 ~ 9112 ~ 10112 ~ 1015724 ~ 3612 ~ 10810 ~ 941020 ~ 8733 ~ 12133 ~ 134140165 ~ 17569 ~ 10181 ~ 15049 ~ 12025 ~ 546.6 ~ 1515 ~ 331.1 ~ 11.8
                                                                                            work materialQuenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[◎]Quenched and tempered steel[◎]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[◎]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[◎]Quenched and tempered steel[◎]Quenched and tempered steel[○]Quenched and tempered steel[○]Quenched and tempered steel[◎]Quenched and tempered steel[◎]Quenched and tempered steel[◎]Quenched and tempered steel[◎]Quenched and tempered steel[○]Quenched and tempered steel[◎]Quenched and tempered steel[◎]Quenched and tempered steel[○]Quenched and tempered steel[◎]Quenched and tempered steel[○]Quenched and tempered steel[◎]Quenched and tempered steel[○]Quenched and tempered steel[○]
                                                                                            Shank Typestraight shankEnd Mill ShankEnd Mill ShankEnd Mill ShankEnd Mill ShankEnd Mill Shankstraight shankEnd Mill Shankstraight shankEnd Mill Shank / straight shankEnd Mill Shank / straight shankEnd Mill Shank / straight shank-End Mill ShankEnd Mill Shank / straight shankEnd Mill ShankEnd Mill ShankEnd Mill ShankEnd Mill ShankEnd Mill ShankEnd Mill ShankEnd Mill Shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shankstraight shankTaper shankTaper shank----
                                                                                            Tool Material TypeCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbide---CarbideCarbideCarbideCarbideCarbideCarbideCobalt HSSCobalt HSSHigh-speed steelCarbideCarbideCarbideCarbideCarbideCobalt HSSCobalt HSSCobalt HSSCobalt HSSCobalt HSSCobalt HSSCobalt HSSCobalt HSSCobalt HSSCobalt HSSCobalt HSSHigh-speed steelCobalt HSSCarbideCarbideCarbideCobalt HSS
                                                                                            With/without Oil HoleNANANANANANANANANAAvailableAvailableAvailable-AvailableAvailableNANAAvailableAvailableAvailableNANANANANANANANANANANANANANANANANANANANANAAvailableNAAvailableNA
                                                                                            Coating Y/NNANAAvailableAvailableNANANANAAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableNAAvailableAvailableAvailableAvailableNAAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailable
                                                                                            Coating TypeNon-CoatedNon-CoatedFor General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)Non-CoatedNon-CoatedNon-CoatedNon-CoatedTiAlNTiCNTiCNTiCNOther--TiAlNOtherOtherOtherOtherTiNTiNOtherOtherOtherOtherOther-OtherTiNTiNOther-TiNTiNOtherOtherOtherOtherOtherOtherOtherOtherOtherTiN

                                                                                            Loading...

                                                                                            Related Categories to Drill Bits