Screws for Building Materials

• 

  Countersunk Head Wooden Screw【1-5,000 Pieces Per Package】

  SUNCO

  A screw used to fasten wood.
  [Features]
  ·Wood screws are basically the same as tapping screws, by drilling pilot holes and then tightening them with a screwdriver.
  ·When drilling a pilot hole, use a drill or drill to make the hole about 70% the thickness of the wood screw.
  ·Material: Steel/brass/stainless steel.

  Standard Price:	2,305 IDR-
  Days to Ship:	Same day or more

• 

  Flat head wood screw (Stainless steel)【5-50 Pieces Per Package】

  TRUSCO NAKAYAMA

  ● Has a tip and screw threading suited to screwing into wood.
  ● Made from corrosion-resistant stainless steel.
  ● For use with wood.

  Standard Price:	99,188 IDR
  Days to Ship:	8 Day(s) or more

• 

  Coarse Thread Trumpet Head with Phillips Head【1-1,000 Pieces Per Package】

  SUNCO

  [Material] Steel, stainless steel SUS410, stainless steel
  [Surface treatment] None, trivalent chromate, bright chromate plating, chromate plating, parker, painting, coating, silver, copper, tin plating

  Standard Price:	3,495 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Raised Countersunk Head Wood Screw【1-1,000 Pieces Per Package】

  SUNCO

  A raised countersunk head screw for building materials that is tightened by making a pilot hole in the same way as a self-tapping screw.
  [Features]
  ·As the name suggests, screws used for wood.
  ·The more you tighten it, the more it goes into the wood.
  ·About 2/3 of the overall length is the thread section.
  ·Threads are not applied to the material sandwiched in the middle.
  ·In addition to the tightening force strengthened by being in close contact with, it prevents detents and rattling.
  ·It is possible to substitute a wood screw with a self-tapping screw that can also be used for resin and metal, but the reverse is not possible.
  [Application]
  ·Often used at construction sites.

  Standard Price:	2,497 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Joint Connector Bolt (B Type) JCB-C (Hex Socket)

  MURAKOSHI SEIKO

  [Type] Joint connector
  [Screw nominal designation (M)] 6
  [Material] Steel
  [Mount hole shape] Hex hole
  [Sales unit] Individual (available for purchase in units of 1), boxes/pack
  [Length] 15, 30, 35, 40, 45, 50, 60, 70, 80, 90, 120
  [Surface treatment] Nickel plating, silver, copper, tin plating
  [Surface treatment] (detail) nickel plating, German brown plating

  Standard Price:	5,542 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Round Wood Screw【1-2,500 Pieces Per Package】

  SUNCO

  As the name suggests, this is a construction screw used for wood.
  [Features]
  ·Make a pilot hole and tighten it in the same way as a self-tapping screw.
  ·The more you tighten it, the more it goes into the wood.
  ·About 2/3 of the overall length is the thread section.
  ·Threads are not applied to the material sandwiched in the middle.
  ·In addition to the tightening force strengthened by being in close contact with, it prevents detents and rattling.
  ·It is possible to substitute a wood screw with a self-tapping screw that can also be used for resin and metal, but the reverse is not possible.
  [Applications]
  ·Often used at construction sites.

  Standard Price:	1,920 IDR-
  Days to Ship:	Same day or more

• 

  Countersunk Head Wooden Screw(Double Threaded and Thin)【1-5,000 Pieces Per Package】

  SUNCO

  SUNCO screw for building materials, countersunk wood screw. (double-thread narrow body type)

  Standard Price:	752 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Narrow Screw【300-1,400 Pieces Per Package】

  FASLINK

  [Features]
  · The fineness of the cuts included with the coarse thread prevents wood splintering, enabling tip hammering to be carried out without difficulty.
  · Due to the special cutting of the tip and small flexible head, it can be used to tighten even hard woods without difficulty.

  Standard Price:	223,354 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Pan Washer Head (Double Thread)【300-600 Pieces Per Package】

  SUNCO

  [Features]
  ·In a self-tapping screw with the thread section with multiple threads, there is a part where torque is applied at the boundary between the tip cone and the shaft. The MT screw is a double-thread screw, but in order to eliminate the torque load, a threadless part is prepared at the boundary which rotated half a turn or several times to achieve smooth workability when screwing.

  Standard Price:	384,662 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel Coarsely Threaded Rap Head【500-1,000 Pieces Per Package】

  FASLINK

  Due to the excellent quenching of the SUS410, it can be used even on hard board materials without a pilot hole. SUSXM7 Highly corrosion-resistant with a widened diameter for improved strength.
  
  [Features]
  · Martensitic SUS410 stainless steel undergoes quenching and has excellent hardness. Can be driven into hard board materials without a pilot hole.
  · Austenitic SUS and XM7 stainless steel is highly corrosion-resistant, and the widened material diameter provides improved strength.

  Standard Price:	668,333 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Insert Nut (Type D)

  MURAKOSHI SEIKO

  An embedded nut for use with carpentry. Insert and use for parts where a female screw cannot be created.

  Standard Price:	6,553 IDR
  Days to Ship:	8 Day(s) or more

• 

  Joint Connector Bolt (B Type) JCB-B, Cross-Head/Straight-Slot (+-)

  MURAKOSHI SEIKO

  [Type] Joint connector
  [Screw nominal designation (M)] 6
  [Material] Steel
  [Mount hole shape] Cross/straight slot
  [Sales unit] Individual (available for purchase in units of 1)
  [Length] 15, 30, 35, 40, 45, 50, 60, 70, 90, 120
  [Surface treatment] Nickel plating, silver, copper, tin plating
  [Surface treatment] (detail) nickel plating, German brown plating

  Standard Price:	4,818 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Joint Connector Decorative Nut, Cross-Head/Straight-Slot (+-)

  MURAKOSHI SEIKO

  [Type] Nut
  [Screw nominal designation (M)] 6
  [Material] Steel
  [Mount hole shape] Cross/straight slot
  [Sales unit] Individual (available for purchase in units of 1)
  [Length] 12, 17
  [Surface treatment] Nickel plating, silver, copper, tin plating
  [Surface treatment] (detail) nickel plating, German brown plating

  Standard Price:	14,029 IDR
  Days to Ship:	8 Day(s) or more

• 

  Hook Bolt Set (Black, Large Wave)【100 Pieces Per Package】

  SUNCO

  [Material] Steel, stainless steel
  [Surface treatment] None, chromate plating

  Standard Price:	530,167 IDR
  Days to Ship:	8 Day(s) or more

• 

  Course thread screw with teeth on head (stainless steel)【20-75 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]·The holding power is approx. 5 times that of a nail. ·Made of rust-resistant stainless steel. ·The screw thread pitch is long (coarse) and the screw grooves are deep, making it one of the most common wood screw for use with electric tools. ·The ribbed head that sinks well. [Applications]·For wood. [Materials]·stainless steel (SUS410)

  Standard Price:	77,220 IDR
  Days to Ship:	8 Day(s) or more

• 

  Screw "drywall" (bright chromate)　【40-110 Pieces Per Package】

  TRUSCO NAKAYAMA

  ● Trumpet-shaped head, appropriate for use with drywall, thin iron plates, and other light iron construction.
  ● For use with drywall and thin iron plate.

  Standard Price:	71,280 IDR
  Days to Ship:	8 Day(s) or more

• 

  No.1 Screw【800-3,000 Pieces Per Package】

  SUNCO

  
  · The No. 1 cross recessed bit type gave its name to the "No. 1 screw"
  · Wooden screw with the thickness and length of thin nails. It was designed as an alternative to nails.
  · Since the screw outer diameter is thin, it can be screwed in lightly without pilot holes.
  · Also, the mating material is unlikely to break and the head diameter is small and does not stand out after use, enabling a clean finish.
  · Unlike nails, it has retaining force, as well as remarkably superior pull-out resistance.
  · Due to using killed steel and quenching, thread cutting, bending, and cross hole slump are minimized, and even teak and tamo timber can be screw-fastened without pilot holes or dish boring.
  · Convenient for frames, floors, and door stops.

  Standard Price:	1,499,833 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Joint Connector decorative nut (hexagonal hole)

  SUNCO

  A cap-type decorative nut designed and developed so that it can be used in a unified manner with JCB-A bolts.
  [Features]
  ·Since the shape of the head is the same as that of the JCB-A, it is possible to match the appearance of both sides.
  ·Since the barrel diameter is the same, it can be used with the same pilot hole diameter.
  ·It can also be used for JCB-B and JCB-C.
  ・ Made of steel.
  ·Surface Treatment: Nickel plating/silver/copper/tin plating.
  [Applications]
  ·Ideal for assembling systemized unit furniture, leggings, cabinets, racks, etc.

  Standard Price:	12,846 IDR-
  Days to Ship:	Same day or more

• 

  Particleboard Screw Countersinking【1,500 Pieces Per Package】

  SUNCO

  
  · Screw developed for MDF and particle board that lack the elasticity of natural wood and have a soft interior, making it harder for screws to catch.
  · The base diameter is much thinner than the screw outer diameter, creating a notable difference between the thread and base and a coarse pitch.
  · The thin base diameter allows it to enter gently without crushing soft materials, and the threading with its large surface area allows the tapping of a wide range of female threads. In addition, on the side in the tip direction of the screw threads, the screwing torque is small because of the acute angle formed at the crests, and an excessive load is not applied to the fitting material. Conversely, the angle of the thread crests on the head side is obtuse. To grasp the fitting material strongly after tightening, the thread crest and valley difference has extremely high draw-out strength. Together with the difference between the angles of the thread crests on the head side and tip side, these characteristics have achieved an outstanding retention force and low screwing torque.
  · Since the thread is tapped from the apex of the screw tip, it bites immediately into the opposite material with good workability to prevent sudden crushing of the opposite material.
  · This "Particle Bit" is an optimized dedicated bit that solves the problems of "screws not working" and "falling out after tightening" that conventional screws have with MDF "particle board" (utility model registered)

  Standard Price:	890,000 IDR
  Days to Ship:	14 Day(s) or more

• 

  Light Screw, Thin Washer【600-1,000 Pieces Per Package】

  SUNCO

  SUS410 cross-recessed countersunk light gauge steel screw. The surface treatment is bright chromate plating, and it is sold in units of boxes and packs.

  Standard Price:	1,255,811 IDR-
  Days to Ship:	17 Day(s) or more

• 

  Mikado Insert (Boxed) For Plywood Formwork 3/8" Type【500 Pieces Per Package】

  mikado

  [Features]
  · Self-standing with three nails.
  · Easy to place with only one hand.
  · After the formwork is removed, the color is visible from the bottom of the slab.
  · Suitable for hanging lightweight items like electrical and disaster-prevention equipment.
  · When the formwork is removed, the nails are removed with the plywood, so they are not left in the ceiling slab.
  · If a nail remains embedded in the slab, pull it out using combination pliers, etc.
  [Applications]
  · For light equipment
  · For heavy equipment.
  [Material]
  · Carbon steel for cold-forging (JISG-3507)
  · Bright chromate plating
  · Polyethylene resin
  · Reinforced engineering plastic

  Standard Price:	6,505,847 IDR
  Days to Ship:	Quote

• 

  Mikado Insert (Boxed) For Deck Plates, Dedicated For Light Gauge Steel【500 Pieces Per Package】

  mikado

  [Features]
  · Employs a spring for fixing.
  · Will not tip over even if stepped on.
  · Can be easily installed by simply pressing the insert by hand into a drilled hole.
  · The color can be checked from the top or bottom of the deck.
  [Applications]
  · For light gauge steel construction.
  [Material]
  · Carbon steel for cold-forging (JISG-3507)
  · Bright chromate plating
  · Polypropylene resin

  Standard Price:	10,429,231 IDR
  Days to Ship:	Quote

• 

  MB TEKS, Countersunk Head【1,000 Pieces Per Package】

  JPF

  A self-drilling screw for metal building that features a thin head integrated with the fitting surface.

  Standard Price:	540,000 IDR
  Days to Ship:	8 Day(s) or more

• 

  Steel LIVE DNL, Phillips Flat Head Drill Screw for Steel House【700 Pieces Per Package】

  KITAMURA SEIKO

  [Screw nominal designation (M)] 4.8
  [Length] 16
  [Material] Steel
  [Surface treatment] Trivalent chromate
  [Surface treatment] (detail) trivalent chromate
  [Mount hole shape] Phillips head
  [Sales unit] Boxes/pack screw threading
  [type] Self-drilling screw
  [Detailed shape] Ultra low head

  Standard Price:	704,155 IDR
  Days to Ship:	8 Day(s) or more

• 

  Rabcon Nabe Phillips Pan Head Drill Screw for Concrete【80-200 Pieces Per Package】

  KITAMURA SEIKO

  [Material] Steel SUS410
  [Surface treatment] None, painting, coating

  Standard Price:	136,233 IDR-
  Days to Ship:	8 Day(s) or more

• 

  "Vis-Con Nabe" Cross-Recessed (+) Drill Screw (Pan Head) For Concrete【100-150 Pieces Per Package】

  YAMAHIRO

  Use for mounting metal fixtures, equipment piping materials, wooden boards, and other materials to concrete-based substrate materials.

  Standard Price:	226,830 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cross-Head Self-Drilling Screw For Concrete (Countersunk Head)【1-300 Pieces Per Package】

  YAMAHIRO

  Use for mounting metal fittings, equipment, piping, wooden boards, and other materials, in underground concrete environments.

  Standard Price:	9,296 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Fascon Cross Recessed Pan Head【1-100 Pieces Per Package】

  FUJI TECH

  Use for mounting metal fittings, equipment, piping, wooden boards, and other materials, in underground concrete environments.

  Standard Price:	1,372 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Fascon Cross/Straight-Slot Hexagon Head【100 Pieces Per Package】

  FUJI TECH

  [Type] Other concrete screw
  [Material] Steel
  [Surface treatment] Painting, coating
  [Surface treatment] (detail) R-silver (Ruspert silver)
  [Mount hole shape] Cross/straight slot
  [Sales unit] Boxes/pack screw threading
  [type] metric coarse
  [Detailed shape] Standard
  [Screw nominal designation (M)] 5, 6
  [Length] 25, 35, 45, 60, 75

  Standard Price:	236,296 IDR
  Days to Ship:	8 Day(s) or more

• 

  Fascon Phillips Pan Washer Head

  FUJI TECH

  [Material] Steel SUS410
  [Surface treatment] None, painting, coating

  Standard Price:	2,283 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Coarse Thread with Square Hole, Square Bit Type【160-1,400 Pieces Per Package】

  FASLINK

  Switching from a Phillips head screw to a square hole model reduces hole collapse and provides more stable screw driving.

  Standard Price:	308,539 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Coarse Thread Bugle Head Screw (Bulk Box)【1,800 Pieces Per Package】

  FASLINK

  [Features]
  · Through the coarse threads with high screw threading and long pitch, this product demonstrates excellent holding power said to be 5x that of a nail.
  · Two types are available, fully-threaded and partially-threaded.

  Standard Price:	411,250 IDR
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel Thin Washer/Screw【250 Pieces Per Package】

  FASLINK

  Demonstrates strong holding power when joining metal roofing (0.8 - 1.2 m / m iron plate) and fire-resistant sheathing panels.

  Standard Price:	593,188 IDR
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel Narrow Screw【600 Pieces Per Package】

  FASLINK

  [Features]
  · The fineness of the cuts included with the coarse thread prevents wood splintering, enabling tip hammering to be carried out without difficulty.
  · Due to the special cutting of the tip and small flexible head, it can be used to tighten even hard woods without difficulty.

  Standard Price:	444,392 IDR
  Days to Ship:	13 Day(s) or more

• 

  Power Thread (Frame Type)【240-1,260 Pieces Per Package】

  FASLINK

  [Features]
  · Due to the special knurling, it opens its own clearance hole and can be driven smoothly into hard woods and synthetic materials containing glues, such as laminate lumber.
  · Also, the flexible part ensures firm tightening.

  Standard Price:	599,621 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Blade Screw【320-1,320 Pieces Per Package】

  FASLINK

  The coarse threaded tip cuts sharply. As a result, it has an edge like a blade that prevent wood splintering for easy fastening.

  Standard Price:	362,839 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Premium LGS Screw, with Head Teeth, Small Box【500-1,000 Pieces Per Package】

  FASLINK

  Because the double screw threads cut sharply into lightweight roofing, screws can pierce this material with just light pressure.

  Standard Price:	245,750 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Premium LGS Screw, Bugle Head【300-1,000 Pieces Per Package】

  FASLINK

  Because the double screw threads cut sharply into lightweight roofing, screws can pierce this material with just light pressure.

  Standard Price:	227,224 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Premium LGS Screw, Bugle Head, Colored (White)【500-1,000 Pieces Per Package】

  FASLINK

  Because the double screw threads cut sharply into lightweight roofing, screws can pierce this material with just light pressure.

  Standard Price:	334,950 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Insert Nut (Type M)

  MURAKOSHI SEIKO

  [Type] Insert nut
  [Material] Lead
  [Surface treatment] Trivalent chromate
  [Surface treatment] (detail) trivalent white
  [Sales unit] Individual (available for purchase in units of 1)
  [Screw nominal designation (M)] 4, 6
  [Length] 21, 31, 33

  Standard Price:	6,592 IDR
  Days to Ship:	8 Day(s) or more

• 

  Joint Connector Bolt (A Type) JCB-A (Hex Socket)

  MURAKOSHI SEIKO

  [Type] Joint connector
  [Screw nominal designation (M)] 6
  [Material] Steel
  [Mount hole shape] Hex hole
  [Length] 23, 30, 35, 40, 45, 50, 55, 60, 70
  [Surface treatment] Nickel plating, silver, copper, tin plating
  [Surface treatment] (detail) nickel plating, German brown plating
  [Sales unit] Individual (available for purchase in units of 1), boxes/pack

  Standard Price:	9,803 IDR
  Days to Ship:	8 Day(s) or more

• 

  Joint Connector Bolt (A Type) JCB-A, Cross-Head/Straight-Slot (+-)【1-100 Pieces Per Package】

  MURAKOSHI SEIKO

  [Type] Joint connector
  [Screw nominal designation (M)] 6
  [Material] Steel
  [Mount hole shape] Cross/straight slot
  [Length] 23, 30, 35, 40, 45, 50, 55, 60, 70, 80
  [Surface treatment] Nickel plating, silver, copper, tin plating
  [Surface treatment] (detail) nickel plating, German brown plating
  [Sales unit] Individual (available for purchase in units of 1), boxes/pack

  Standard Price:	9,803 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Join Connector Bolt (C Type) JCB-C (Hex Socket)

  MURAKOSHI SEIKO

  [Type] Joint connector
  [Screw nominal designation (M)] 6
  [Material] Steel
  [Mount hole shape] Hex hole
  [Sales unit] Individual (available for purchase in units of 1)
  [Length] 30, 35, 40, 45, 50, 60, 70, 80, 90, 100
  [Surface treatment] Nickel plating, silver, copper, tin plating
  [Surface treatment] (detail) nickel plating, German brown plating

  Standard Price:	4,818 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Joint Connector Decorative Nut A Type (Hex Socket)

  MURAKOSHI SEIKO

  Use for building wooden shelves, tables, and other projects. Can be fixed in place with a set and joint connector bolt or with a bolt or cap bolt.

  Standard Price:	13,015 IDR
  Days to Ship:	8 Day(s) or more

• 

  Cap (Joint Connector Cap), Brown

  MURAKOSHI SEIKO

  [Type] Wood screw cap
  [Material] Resin
  [Surface treatment] None
  [Surface treatment] (detail) none
  [Sales unit] Individual (available for purchase in units of 1)

  Standard Price:	1,686 IDR
  Days to Ship:	24 Day(s) or more

Loading...