(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Dowel Pins, Spring Pins, Stepped Pins（Material：Stainless Steel）
Standards are stipulated in JIS, and products designed according to both the new and old JIS standards are available. MISUMI offers products of both standards, so note the difference in tolerance.
Besides the dowel pin, MISUMI offers abundant shapes such as spring pin and stepped pin, as well as sizes from 0.1 to 30 mm and length from 2 to 200 mm. [Materials] > Stainless steel, iron (steel), resin
[Nominal Diameter] > 0.1 to 30 mm
Shape
-
Straight / Dual-Fit Dowel -
Tapered -
Stepped -
Plastic (Insulation) -
Spring Pins -
Specialized Tools
-
![Dowel (MST/MSTM/MSTMS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110302390350/110302390350_001.jpg?$product_view_b$)
Dowel (MST/MSTM/MSTMS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]
MISUMI
Positive Tolerance Type Dowel Pins.
- Volume Discount
Standard Price: 38,247 IDR- Days to Ship: 8 Day(s) or more -
MISUMI
[Features]This grippy pin can be used for simple fastening and positioning.
- Volume Discount
Standard Price: 4,339 IDR- Days to Ship: Same day or more -
MISUMI
Positive Tolerance Type Dowel Pins.
- Volume Discount
Standard Price: 22,949 IDR- Days to Ship: Same day or more -
Dowel, Negative Tolerance, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: h7
MISUMI
[Features]A dowel with minus tolerance. [Shape]Straight / stepped parallel; Material: Available in SUS304 or SUS440C / 13Cr stainless steel.
- Volume Discount
Standard Price: 23,204 IDR- Days to Ship: Same day or more -
![Dowel (MSTP/MSTPC/MSTPCS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]](//content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110302390260/110302390260_001.jpg?$product_view_b$)
Dowel (MSTP/MSTPC/MSTPCS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]
MISUMI
Positive Tolerance Type Dowel Pins.
- Volume Discount
Standard Price: 13,882 IDR- Days to Ship: Same day or more -
Dowel, Negative Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: h7
MISUMI
[Features]A dowel with minus tolerance. [Shape]Straight / stepped parallel; Material: SUS440C
- Volume Discount
Standard Price: 29,642 IDR- Days to Ship: Same day or more -
HIMENO PRECISION
M6 (positive tolerance) parallel pins. On Web, items whose M diameter and length are up to 16 and 100mm, respectively, are available.
Standard Price: 3,381 IDR- Days to Ship: 8 Day(s) or more -
![Dowel Pin -Minus Tolerance- [Published in mechanical parts catalog]](//id.misumi-ec.com/linked/material/mech/MSM1/PHOTO/10302390960.jpg?$product_view_b$)
Dowel Pin -Minus Tolerance- [Published in mechanical parts catalog]
MISUMI
*This product is available as mechanical parts and parts for press molds.
This page is based on the content listed in the mechanical parts catalog.- Volume Discount
Standard Price: 38,247 IDR- Days to Ship: Same day or more -
Parallel Pin B Type【1-50 Pieces Per Package】
HIMENO PRECISION
An h7 (minus) tolerance dowel pin. Metric diameters up to 25 mm and lengths up to 150 mm are available on the web.
- Volume Discount
Standard Price: 3,381 IDR- Days to Ship: Same day or more -
General-Purpose Pin, End Shape: Both Sides Tapered. Fit Tolerance: g6
MISUMI
[Features]A general-purpose pin with an outer diameter tolerance of g6. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.
- Volume Discount
Standard Price: 38,247 IDR- Days to Ship: Same day or more -
Taper Pin【1-25 Pieces Per Package】
HIMENO PRECISION
A headless pin with a circular cross section and a side taper of 1/50.
- Volume Discount
Standard Price: 8,733 IDR- Days to Ship: 8 Day(s) or more -
Dowel, Negative Tolerance, End Shape: Chamfer Edge on Both Sides, Fit Tolerance: h7
MISUMI
[Features]A dowel with minus tolerance. [Shape]Straight / stepped parallel; Material: SUS304 and SUS440C.
- Volume Discount
Standard Price: 32,511 IDR- Days to Ship: Same day or more -
Dual Fit Dowel Pins - p6-h7 p6-g6
MISUMI
[Features]A stepped parallel pin with different diameter tolerances on both ends. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.
- Volume Discount
Standard Price: 61,196 IDR- Days to Ship: Same day or more -
Dual Fit Dowel Pins - Hollow, Tapped
MISUMI
[Features]A stepped parallel pin with different diameter tolerances on both ends. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.
- Volume Discount
Standard Price: 110,918 IDR- Days to Ship: 8 Day(s) or more -
Spring Pin (for General Purposes)【1-1,000 Pieces Per Package】
OCHIAI
[Features]
· Cylindrically coiled thin plate with a slit. When inserted (by press fit) into a hole with a diameter slightly smaller than that of its outer diameter, the pin applies internal pressure to the hole (force due to its expansion), preventing it from dropping out from the hole.
· This hollow pin contributes to weight reduction when compared with solid pins.
· Used for positioning, turn prevention, and retention, etc.
· Used for simple fastening and positioning, etc.
· Its grip prevents it from dropping out from its mating hole.
· When it is necessary to increase the shear load, use a double-pin structure. (The load is made by adding the shear load on the outer and inner pins.)- Volume Discount
Standard Price: 844 IDR- Days to Ship: Same day or more -
Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: p6
MISUMI
[Features]A dowel with over tolerance. [Shape]Straight / stepped parallel; Material: SUJ2 and SUS440C.
- Volume Discount
Standard Price: 61,196 IDR- Days to Ship: 8 Day(s) or more -
Spring Pin, Wave Type, for General Use【1-5,000 Pieces Per Package】
TAIYO STAINLESS SPRING
It has less product entanglement compared to the straight type, and is suitable for automatic insertion.
In addition, it has long extended dimensions, with superior circularity and drawing load capacities.Standard Price: 844 IDR- Days to Ship: 8 Day(s) or more -
Stepped Dowel Pins - Standard with Tapped Hole
MISUMI
Dual-Fit Dowel Pins with different dimension tolerances provided for both ends.
- Volume Discount
Standard Price: 84,145 IDR- Days to Ship: 8 Day(s) or more -
Standard Price: 234,605 IDR- Days to Ship: 8 Day(s) or more -
Parallel Pin Class B, h7 SUS303
OHKITA
A dowel pin made of SUS303.
Use for applications that require corrosion resistance.
The shape of the end surfaces is the same.Standard Price: 9,988 IDR- Days to Ship: 8 Day(s) or more -
Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: +0.002/0
MISUMI
Positive Tolerance Type Dowel Pins.
- Volume Discount
Standard Price: 24,862 IDR- Days to Ship: Same day or more -
Taper Pin With External Thread【1-100 Pieces Per Package】
OHKITA
Insertion and maintenance are simple, since outer screws are included.
Standard Price: 57,469 IDR- Days to Ship: 8 Day(s) or more -
SUNCO
Parallel pins that are centerless ground after cutting to finish the straightness, roundness, and outer diameter.
[Features]
·Made of stainless steel.
[Applications]
·It is suitable for home appliances, medical care, and food-related industries.
·Used for rotary shafts and hinge shafts.Standard Price: 2,535 IDR- Days to Ship: 8 Day(s) or more -
Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: +0.01/+0.005
MISUMI
[Features]A dowel with over tolerance. [Shape]Straight / stepped parallel; Material: SUS304 and SUS440C.
- Volume Discount
Standard Price: 32,511 IDR- Days to Ship: Same day or more -
General-Purpose Pin, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: g6
MISUMI
[Features]A general-purpose pin with an outer diameter tolerance of g6. [Shape]Straight / stepped parallel; Material: SUJ2/SUS304/SUS440C.
- Volume Discount
Standard Price: 32,511 IDR- Days to Ship: 8 Day(s) or more -
Grooved Pin C Type【1-1,000 Pieces Per Package】
SUNCO
[Features]There is a horizontal groove with same thickness. [Materials]Can choose from steel or stainless steel.
Standard Price: 8,234 IDR- Days to Ship: 8 Day(s) or more -
Tapered Pin With Inner Screw【1-50 Pieces Per Package】
OHKITA
[Features]Easy to insert via internal thread. [Shape]Can choose from taper; material: S45C and SUS303.
Standard Price: 55,609 IDR- Days to Ship: 8 Day(s) or more -
Parallel Pin, Class A, m6 SUS303
OHKITA
A dowel pin made of SUS303.
Use for applications that require corrosion resistance.
The shape of the end surfaces varies on each side, but insertion should generally be from the flat tip.Days to Ship: 8 Day(s) or more -
![Long Parallel Pin [h7] SUS303](//id.misumi-ec.com/linked/material/mech/OKT1/PHOTO/221006225505.jpg?$product_view_b$)
OHKITA
Pin is 300 mm or longer. Cut for use.
Features outstanding corrosion resistance and machining resistance.
Polishing completed for h7 tolerance.
Material = SUS303 EquivalentStandard Price: 182,333 IDR- Days to Ship: 9 Day(s) or more -
SUNCO
Spring pins used for purposes such as connecting, positioning, and preventing screws from rotating.
[Features]
·Generic name for several types of pins to drive.
·A rod-shaped or roll-shaped product consisting of two or more parts is inserted into a precise hole.
·Spring force in the radial direction is used by forming a gap at the seam of a springy plate by rounding it.
·It is possible to have multiple roles such as stopper and hinge.
·When a dynamic load is applied, it is recommended to use the specified insertion direction.
[Applications]
·Compared to general use, the thickness of the plate is thin and the mating material is aluminum or resin, making it suitable for places where the insertion load is kept low.Standard Price: 1,268 IDR- Days to Ship: 8 Day(s) or more -
Parallel Pin, Class A, m6 SUS316
OHKITA
A dowel pin made of SUS316.
Resistance to pitting and gap corrosion has been improved through the use of SUS303.
Features outstanding corrosion resistance to media such as sea water or salt water.
The shape of the end surfaces varies on each side, but insertion should generally be from the flat tip.Standard Price: 27,658 IDR- Days to Ship: 8 Day(s) or more -
Parallel Pin With Internal Thread h7
OHKITA
Internal threading makes insertion easy.
The tolerance is h7.
Material = S45C equivalent; hardness = HRC45 to 52; quenched and tempered.
Material = SUS303 Equivalent. Use for applications where corrosion resistance is required.Standard Price: 73,479 IDR- Days to Ship: 8 Day(s) or more -
OHKITA
This simple dowel pin does not require fitting hole accuracy.
Connects using the protrusions molded on both side of the groove.
The fitting hole recommended tolerance for a nominal diameter of up to 3 mm is H9, and H11 for anything larger.
Material = free-cutting steel; surface processing = nominal diameter less than 4 mm: unprocessed, 4 mm or more: black oxide finish.
Material = A1 (Stainless Steel)Standard Price: 11,525 IDR- Days to Ship: 9 Day(s) or more -
Wave Type Spring Pin for Light Load【1-5,000 Pieces Per Package】
TAIYO STAINLESS SPRING
Suppresses load greater than general spring pins, suitable for resin, aluminum, wood, etc.
- Volume Discount
Standard Price: 1,521 IDR- Days to Ship: 8 Day(s) or more -
Spring Pin (for Light Loads)【1-1,000 Pieces Per Package】
OCHIAI
The opening section is wave-shaped to prevent product entanglement.
- Volume Discount
Standard Price: 1,210 IDR- Days to Ship: Same day or more -
Super Shaft H7【5-30 Pieces Per Package】
KS SANGYO
Parallel pin of the former JIS h7 (negative tolerance).
Standard Price: 232,000 IDR- Days to Ship: 8 Day(s) or more -
Long Super Shaft【5-10 Pieces Per Package】
KS SANGYO
Product standardized in KS Sangyo based on JIS B1354 parallel pin. The sizes are available starting from ultra-fine.
Standard Price: 483,167 IDR Days to Ship: 9 Day(s) or more -
Stainless Steel Parallel Pin, B Type/Soft (h7)【100 Pieces Per Package】
TAIYO STAINLESS SPRING
Outer diameter dimensions are less accurate than that of the A type. Used for rotating shafts, hinges, etc.
* "h7" is the JIS fitting tolerance.Standard Price: 222,167 IDR- Days to Ship: 12 Day(s) or more -
S45C-Q Parallel Pin, B Type/Hard (h7)【100 Pieces Per Package】
TAIYO STAINLESS SPRING
Outer diameter dimensions are less accurate than that of the A type. Used for rotating shafts, hinges, etc.
* "h7" is the JIS fitting tolerance.Standard Price: 228,006 IDR- Days to Ship: 12 Day(s) or more -
Stainless Steel Parallel Pin (Hard)【1-30,000 Pieces Per Package】
TAIYO STAINLESS SPRING
Outer diameter dimensions are more accurate than those of the B type. Used for rotating shafts, hinges, etc.
After cutting, the product undergoes centerless grinding and finishing to ensure straightness, roundness, and outer diameter dimensions.
Made of stainless steel, it is suitable for home appliance, medical, and food-related applications.Standard Price: 3,217 IDR- Days to Ship: 8 Day(s) or more -
Stainless Steel Parallel Pin (Soft)【1-30,000 Pieces Per Package】
TAIYO STAINLESS SPRING
Outer diameter dimensions are less accurate than those of the A type. Used for rotating shafts, hinges, etc.
After cutting, the product undergoes centerless grinding and finishing to ensure straightness, roundness, and outer diameter dimensions.
Made of stainless steel, it is suitable for home appliance, medical, and food-related applications.Standard Price: 2,724 IDR- Days to Ship: 8 Day(s) or more -
SUS303 Parallel Pin, B Type h7【1-1,000 Pieces Per Package】
SUNCO
Parallel pins, also called "knock pins".
[Features]
·When two or more parts are fastened together, they are drilled and hammered together while they are still in place.
·Used for precision machining and heavy-duty machines.
·Material: SUS303.
[Applications]
·Not limited to positioning applications, it is widely used as a machine part.- Volume Discount
Standard Price: 4,748 IDR- Days to Ship: Same day or more -
Standard Price: 6,132 IDR Days to Ship: Same day -
Parallel Pin (Stainless Steel B Type) Taiyo Stainless Spring Co.,Ltd. Made【1-100 Pieces Per Package】
SUNCO
[Features]
·Used for rotating shafts, hinges, etc.
·Additional work is also possible.
[Applications]
·Made of stainless steel, it is suitable for home appliance, medical, and food-related applications.Standard Price: 13,944 IDR- Days to Ship: 8 Day(s) or more -
Parallel Pin, Class B, h7 SUS316
OHKITA
A dowel pin made of SUS316.
Resistance to pitting and gap corrosion has been improved through the use of SUS303.
Features outstanding corrosion resistance to media such as sea water or salt water.
The shape of the end surfaces is the same.Standard Price: 27,658 IDR- Days to Ship: 8 Day(s) or more
![Dowel (MST/MSTM/MSTMS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110302390350/110302390350_001.jpg?$product_view_b$)
![Dowel (MSTP/MSTPC/MSTPCS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]](http://content.misumi-ec.com/image/upload/t_product_view_b/v1/p/jp/product/series/110302390260/110302390260_001.jpg?$product_view_b$)
![Dowel Pin -Minus Tolerance- [Published in mechanical parts catalog]](http://id.misumi-ec.com/linked/material/mech/MSM1/PHOTO/10302390960.jpg?$product_view_b$)
![Long Parallel Pin [h7] SUS303](http://id.misumi-ec.com/linked/material/mech/OKT1/PHOTO/221006225505.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Nominal Dia. |
| Shaft Dia. Tolerance |
| Length |
| Shape |
| End Shape |
| Outer Dia. (Max.)(mm) |
| Material |
| Properties |
| Outer Dia. (Min.)(mm) |
| Surface Treatment |
| Sales Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | HIMENO PRECISION | MISUMI | HIMENO PRECISION | MISUMI | HIMENO PRECISION | MISUMI | MISUMI | MISUMI | OCHIAI | MISUMI | TAIYO STAINLESS SPRING | MISUMI | KS SANGYO | OHKITA | MISUMI | OHKITA | SUNCO | MISUMI | MISUMI | SUNCO | OHKITA | OHKITA | OHKITA | SUNCO | OHKITA | OHKITA | OHKITA | TAIYO STAINLESS SPRING | OCHIAI | KS SANGYO | KS SANGYO | TAIYO STAINLESS SPRING | TAIYO STAINLESS SPRING | TAIYO STAINLESS SPRING | TAIYO STAINLESS SPRING | SUNCO | SUNCO | SUNCO | OHKITA |
| Product Series | Dowel (MST/MSTM/MSTMS) -Plus Tolerance- [Listed in Mechanical Parts Catalog] | Dowel, Negative Tolerance, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: h7 | Dowel (MSTP/MSTPC/MSTPCS) -Plus Tolerance- [Listed in Mechanical Parts Catalog] | Dowel, Negative Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: h7 | Dowel Pin -Minus Tolerance- [Published in mechanical parts catalog] | General-Purpose Pin, End Shape: Both Sides Tapered. Fit Tolerance: g6 | Dowel, Negative Tolerance, End Shape: Chamfer Edge on Both Sides, Fit Tolerance: h7 | Spring Pin (for General Purposes)【1-1,000 Pieces Per Package】 | Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: p6 | Spring Pin, Wave Type, for General Use【1-5,000 Pieces Per Package】 | Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: +0.002/0 | Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: +0.01/+0.005 | General-Purpose Pin, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: g6 | Wave Type Spring Pin for Light Load【1-5,000 Pieces Per Package】 | Stainless Steel Parallel Pin, B Type/Soft (h7)【100 Pieces Per Package】 | S45C-Q Parallel Pin, B Type/Hard (h7)【100 Pieces Per Package】 | Stainless Steel Parallel Pin (Hard)【1-30,000 Pieces Per Package】 | Stainless Steel Parallel Pin (Soft)【1-30,000 Pieces Per Package】 | Parallel Pin (Stainless Steel B Type) Taiyo Stainless Spring Co.,Ltd. Made【1-100 Pieces Per Package】 | ||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | 8 Day(s) or more | Same day or more | Same day or more | Same day or more | 8 Day(s) or more | Same day or more | Same day or more | 8 Day(s) or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | Same day or more | 8 Day(s) or more | 9 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | Same day or more | Same day | 8 Day(s) or more | 8 Day(s) or more |
| Nominal Dia. | 5 ～ 10 | 2 ～ 6 | 1 ～ 12 | 1 ～ 10 | 5 ～ 13 | 5 ～ 12 | 1 ～ 16 | 5 ～ 10 | 1 ～ 16 | 5 ～ 10 | 1 ～ 20 | 2 ～ 8 | 3 ～ 12 | 6 ～ 12 | 1 ～ 6 | 6 ～ 12 | 1 ～ 10 | 5 ～ 13 | 0.1 ～ 6 | 1 ～ 20 | 1 ～ 10 | 5 ～ 12 | 1 ～ 1.6 | 2 ～ 6 | 2 ～ 8 | 1 ～ 4 | 5 ～ 13 | 1 ～ 20 | 3 ～ 20 | 1 ～ 6 | 2 ～ 6 | 5 ～ 13 | 1 ～ 4 | 1 ～ 6 | 1.6 ～ 4 | 0.1 ～ 6 | 4 ～ 6 | 4 ～ 6 | 5 ～ 6 | 1 ～ 3 | 1 ～ 5 | 1 ～ 20 | 3 | 4 ～ 6 | 2 ～ 6 |
| Shaft Dia. Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Negative Tolerance | Positive Tolerance | Negative Tolerance | Positive Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Positive Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | Negative Tolerance | Positive Tolerance | Positive Tolerance | - | Positive Tolerance | Negative Tolerance | Positive Tolerance | Positive Tolerance | Positive Tolerance | - | - | Positive Tolerance | - | - | Positive Tolerance | Positive Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Negative Tolerance | Positive Tolerance | Negative Tolerance | - | - | Negative Tolerance |
| Length | 10 ～ 40 | 5 ～ 56 | 5 ～ 60 | 5 ～ 60 | 10 ～ 60 | 10 ～ 50 | 4 ～ 100 | 10 ～ 45 | 4 ～ 100 | 10 ～ 40 | 6 ～ 160 | 6 ～ 20 | 8 ～ 40 | 12 ～ 40 | 4 ～ 63 | 15 ～ 45 | 4 ～ 100 | 15 ～ 70 | 2 ～ 60 | 4 ～ 100 | 5 ～ 60 | 35 ～ 100 | 3 ～ 20 | 6 ～ 25 | 6 ～ 20 | 4 ～ 30 | 20 ～ 60 | 4 ～ 120 | 300 ～ 350 | 4 ～ 63 | 4 ～ 30 | 15 ～ 50 | 4 ～ 30 | 4 ～ 50 | 5 ～ 50 | 2 ～ 65 | 80 ～ 150 | 8 ～ 28 | 12 ～ 16 | 3 ～ 35 | 3 ～ 35 | 4 ～ 100 | 4 | 8 ～ 60 | 4 ～ 30 |
| Shape | Straight / Dual-Fit Dowel | Spring Pins | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Tapered | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Spring Pins | Straight / Dual-Fit Dowel | Spring Pins | Stepped | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Tapered | - | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Spring Pins | Tapered | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | - | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | - | Spring Pins | Spring Pins | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | Straight / Dual-Fit Dowel | - | - | Straight / Dual-Fit Dowel |
| End Shape | Tapped | Standard | Standard | Standard | Tapped | Tapped | Standard | Tapped | Standard | Tapped | Standard | Standard | Standard | Tapped | Standard | Tapped | Standard | Standard / Tapped | Standard | Standard | Standard | External Thread | - | Standard | Standard | Standard | Tapped | Standard | - | - | Standard | Tapped | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | - | Standard |
| Outer Dia. (Max.)(mm) | - | 2.25 ～ 6.4 | - | - | - | - | - | - | - | - | - | - | - | - | 1.2 ～ 6.4 | - | 1.2 ～ 10.6 | - | - | - | - | - | - | - | - | 1 ～ 4.25 | - | - | - | - | - | - | 1.05 ～ 4.25 | 1.2 ～ 6.4 | 1.8 ～ 4.4 | - | - | - | - | - | - | - | - | - | - |
| Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Properties | - | Regular | - | - | - | - | - | - | - | - | - | - | - | - | Regular | - | Regular | - | - | Regular | - | Regular | - | - | - | Regular | Regular | Regular | Regular | - | Regular | Regular | Regular | Light Load | Light Load | - | - | Regular | Regular | Regular | Regular | Regular | - | - | Regular |
| Outer Dia. (Min.)(mm) | - | 2.15 ～ 6.2 | - | - | - | - | - | - | - | - | - | - | - | - | 1.1 ～ 6.2 | - | 1.1 ～ 10.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.1 ～ 6.2 | 1.7 ～ 4.2 | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | - | Not Provided | - | - | - | - | Not Provided | - | Not Provided | - | Not Provided | - | - | - | Not Provided | - | Glossy Finishing | - | - | Not Provided | - | Not Provided | Not Provided | - | - | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | - | Glossy Finishing | Not Provided | - | - | Not Provided | Not Provided | Not Provided / Glossy Finishing | Not Provided / Glossy Finishing | Not Provided | Not Provided | Not Provided | Not Provided |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg. | Low Quantity (Available beginning with 1 pc.) |
![Dowel (MST/MSTM/MSTMS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110302390350/110302390350_001.jpg?$product_view_c$)
![Dowel (MSTP/MSTPC/MSTPCS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]](http://content.misumi-ec.com/image/upload/t_product_view_c/v1/p/jp/product/series/110302390260/110302390260_001.jpg?$product_view_c$)
![Dowel Pin -Minus Tolerance- [Published in mechanical parts catalog]](http://id.misumi-ec.com/linked/material/mech/MSM1/PHOTO/10302390960.jpg?$product_view_c$)
![Long Parallel Pin [h7] SUS303](http://id.misumi-ec.com/linked/material/mech/OKT1/PHOTO/221006225505.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Nominal Dia.
-
Shaft Dia. Tolerance
- Positive Tolerance
- Negative Tolerance
-
Length
-
End Shape
-
Standard -
Tapped -
External Thread
-
-
Outer Dia. (Max.)(mm)
-
Material
-
Properties
-
Outer Dia. (Min.)(mm)
-
Surface Treatment
-
Sales Unit
Narrow search by specifying Manufacturer
-
- OHKITA (12)
- SUNCO (6)
- TAIYO STAINLESS SPRING (6)
- HIMENO PRECISION (3)
- KS SANGYO (3)
- OCHIAI (2)
- TRUSCO NAKAYAMA (0)
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 1 Day(s) or Less
- 5 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
- 12 Day(s) or Less
- 13 Day(s) or Less
- 14 Day(s) or Less
Related Categories to Dowel Pins, Spring Pins, Stepped Pins
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy