(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
    Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Dowel Pins, Spring Pins, Stepped Pins

It is used as a positioning part. Some brands call it a dowel pin or straight pin, but there is no difference in the standards.
Standards are stipulated in JIS, and products designed according to both the new and old JIS standards are available. MISUMI offers products of both standards, so note the difference in tolerance.
Besides the dowel pin, MISUMI offers abundant shapes such as spring pin and stepped pin, as well as sizes from 0.1 to 30 mm and length from 2 to 200 mm. [Materials] > Stainless steel, iron (steel), resin
[Nominal Diameter] > 0.1 to 30 mm

Shape

Brand
Product Series
CAD
Days to Ship
Nominal Dia.
Shaft Dia. Tolerance
Length
Shape
End Shape
Outer Dia. (Max.)(mm)
Material
Properties
Outer Dia. (Min.)(mm)
Surface Treatment
Sales Unit

    Dowel (MST/MSTM/MSTMS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]

      Spring Pins

        Dowel Pin Type C

          Dowel, Positive Tolerance, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: +0.01/+0.005

            Dowel, Negative Tolerance, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: h7

              Dowel Pins - Tapered, Tapped

                Dowel (MSTP/MSTPC/MSTPCS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]

                  Dowel Pin -Minus Tolerance- [Published in mechanical parts catalog]

                    Taper Pin

                      Insulating Dowel Pins

                        Dowel, Negative Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: h7

                          Spring Pin Straight Type

                            Dowel Pin DP/h7

                              Dual Fit Dowel Pins - p6-h7 p6-g6

                                Dowel Pin With Inside Threads, E Type (With Straight Groove)

                                  Parallel Pin B Type

                                    S45C-Q Taper Pin

                                      S45C Taper Pin

                                        Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: +0.01/+0.005

                                          General-Purpose Pin, End Shape: Both Sides Tapered. Fit Tolerance: g6

                                            Parallel Pin A Type

                                              Spring Pin

                                                Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: p6

                                                  Stepped Dowel Pins - Standard with Tapped Hole

                                                    Plastic Dowel Pins

                                                      Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: +0.002/0

                                                        Dowel Pin DP/m6

                                                          Spring Pin (for General Purposes)

                                                            Parallel Pin With Internal Thread h7

                                                              Dual Fit Dowel Pins - Hollow, Tapped

                                                                Spring Pin, Wave Type, for General Use

                                                                  Wave Type Spring Pin for Light Load

                                                                    Parallel Pin, Former JIS M6

                                                                      Dowel Pin With Internal Thread TMMDP

                                                                        Dowel Pin With Internal Thread THMDP

                                                                          Dowel Pin B Type

                                                                            Grooved Pin A Type

                                                                              Knock Pin A Type

                                                                                Dowel Pin Inch Size

                                                                                  Dowel, Negative Tolerance, End Shape: Chamfer Edge on Both Sides, Fit Tolerance: h7

                                                                                    Dowel Removal Jigs

                                                                                      General-Purpose Pin, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: g6

                                                                                        S45C-Q Parallel Pin m6

                                                                                          S45C-Q Taper Pin With Internal Thread

                                                                                            Dowel Pin With Internal Thread TPMDP

                                                                                            Brand

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            OHKITA

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            HIMENO PRECISION

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            HIMENO PRECISION

                                                                                            HIMENO PRECISION

                                                                                            MISUMI

                                                                                            OHKITA

                                                                                            HIMENO PRECISION

                                                                                            HIMENO PRECISION

                                                                                            OHKITA

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            HIMENO PRECISION

                                                                                            TRUSCO NAKAYAMA

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            HIMENO PRECISION

                                                                                            OCHIAI

                                                                                            OHKITA

                                                                                            MISUMI

                                                                                            TAIYO STAINLESS SPRING

                                                                                            TAIYO STAINLESS SPRING

                                                                                            HIMENO PRECISION

                                                                                            HIMENO PRECISION

                                                                                            HIMENO PRECISION

                                                                                            OHKITA

                                                                                            SUNCO

                                                                                            OHKITA

                                                                                            OHKITA

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            HIMENO PRECISION

                                                                                            HIMENO PRECISION

                                                                                            HIMENO PRECISION

                                                                                            Product Series

                                                                                            Dowel (MST/MSTM/MSTMS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]

                                                                                            Spring Pins

                                                                                            Dowel Pin Type C

                                                                                            Dowel, Positive Tolerance, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: +0.01/+0.005

                                                                                            Dowel, Negative Tolerance, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: h7

                                                                                            Dowel Pins - Tapered, Tapped

                                                                                            Dowel (MSTP/MSTPC/MSTPCS) -Plus Tolerance- [Listed in Mechanical Parts Catalog]

                                                                                            Dowel Pin -Minus Tolerance- [Published in mechanical parts catalog]

                                                                                            Taper Pin【1-1,000 Pieces Per Package】

                                                                                            Insulating Dowel Pins

                                                                                            Dowel, Negative Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: h7

                                                                                            Spring Pin Straight Type【1-1,000 Pieces Per Package】

                                                                                            Dowel Pin DP/h7【1-1,000 Pieces Per Package】

                                                                                            Dual Fit Dowel Pins - p6-h7 p6-g6

                                                                                            Dowel Pin With Inside Threads, E Type (With Straight Groove)

                                                                                            Parallel Pin B Type【1-1,000 Pieces Per Package】

                                                                                            S45C-Q Taper Pin【1-100 Pieces Per Package】

                                                                                            S45C Taper Pin【1-1,000 Pieces Per Package】

                                                                                            Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: +0.01/+0.005

                                                                                            General-Purpose Pin, End Shape: Both Sides Tapered. Fit Tolerance: g6

                                                                                            Parallel Pin A Type【1-50 Pieces Per Package】

                                                                                            Spring Pin【16-182 Pieces Per Package】

                                                                                            Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: p6

                                                                                            Stepped Dowel Pins - Standard with Tapped Hole

                                                                                            Plastic Dowel Pins

                                                                                            Dowel, Positive Tolerance, End Shape: Both Sides Tapered. Fit Tolerance: +0.002/0

                                                                                            Dowel Pin DP/m6【1-100 Pieces Per Package】

                                                                                            Spring Pin (for General Purposes)【1-1,000 Pieces Per Package】

                                                                                            Parallel Pin With Internal Thread h7

                                                                                            Dual Fit Dowel Pins - Hollow, Tapped

                                                                                            Spring Pin, Wave Type, for General Use【1-5,000 Pieces Per Package】

                                                                                            Wave Type Spring Pin for Light Load【1-5,000 Pieces Per Package】

                                                                                            Parallel Pin, Former JIS M6

                                                                                            Dowel Pin With Internal Thread TMMDP

                                                                                            Dowel Pin With Internal Thread THMDP

                                                                                            Dowel Pin B Type

                                                                                            Grooved Pin A Type【1-1,000 Pieces Per Package】

                                                                                            Knock Pin A Type

                                                                                            Dowel Pin Inch Size

                                                                                            Dowel, Negative Tolerance, End Shape: Chamfer Edge on Both Sides, Fit Tolerance: h7

                                                                                            Dowel Removal Jigs

                                                                                            General-Purpose Pin, End Shape: One Side Tapered, One Side Spherical, Fit Tolerance: g6

                                                                                            S45C-Q Parallel Pin m6

                                                                                            S45C-Q Taper Pin With Internal Thread【1-40 Pieces Per Package】

                                                                                            Dowel Pin With Internal Thread TPMDP【1-50 Pieces Per Package】

                                                                                            CAD
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            • 2D / 3D
                                                                                            Days to Ship Same day or more Same day or more 8 Day(s) or more Same day or more Same day or more Same day or more Same day or more Same day or more 8 Day(s) or more Same day or more Same day or more 8 Day(s) or more 8 Day(s) or more Same day or more 8 Day(s) or more Same day or more 8 Day(s) or more 8 Day(s) or more Same day or more Same day or more 8 Day(s) or more Same day or more Same day or more Same day or more 10 Day(s) or more Same day or more 8 Day(s) or more Same day or more 8 Day(s) or more Same day or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 9 Day(s) or more 8 Day(s) or more Same day or more Same day 8 Day(s) or more 8 Day(s) or more Same day or more 8 Day(s) or more
                                                                                            Nominal Dia.5 ~ 202 ~ 103 ~ 131 ~ 121 ~ 108 ~ 165 ~ 165 ~ 101 ~ 256 ~ 125 ~ 122 ~ 132 ~ 203 ~ 126 ~ 201 ~ 253 ~ 251 ~ 302 ~ 65 ~ 121 ~ 2526 ~ 125 ~ 133 ~ 81 ~ 102 ~ 201 ~ 135 ~ 206 ~ 121 ~ 131 ~ 66 ~ 85 ~ 205 ~ 203 ~ 131.5 ~ 81.5 ~ 101/2 ~ 7/162 ~ 8-2 ~ 85 ~ 205 ~ 165 ~ 16
                                                                                            Shaft Dia. TolerancePositive TolerancePositive ToleranceNegative TolerancePositive ToleranceNegative TolerancePositive TolerancePositive ToleranceNegative TolerancePositive TolerancePositive ToleranceNegative TolerancePositive ToleranceNegative ToleranceNegative TolerancePositive ToleranceNegative TolerancePositive TolerancePositive TolerancePositive ToleranceNegative TolerancePositive TolerancePositive TolerancePositive TolerancePositive TolerancePositive TolerancePositive TolerancePositive TolerancePositive Tolerance-Negative TolerancePositive TolerancePositive TolerancePositive TolerancePositive ToleranceNegative TolerancePositive TolerancePositive Tolerance-Positive ToleranceNegative Tolerance-Negative TolerancePositive TolerancePositive TolerancePositive Tolerance
                                                                                            Length10 ~ 805 ~ 10010 ~ 1005 ~ 605 ~ 6030 ~ 7010 ~ 8010 ~ 456 ~ 1608 ~ 5010 ~ 505 ~ 1004 ~ 1008 ~ 4015 ~ 1004 ~ 15014 ~ 15010 ~ 2006 ~ 2510 ~ 454 ~ 15010 ~ 5015 ~ 4515 ~ 7010 ~ 255 ~ 604 ~ 1004 ~ 14010 ~ 12012 ~ 404 ~ 1004 ~ 5015 ~ 3010 ~ 8010 ~ 806 ~ 1008 ~ 364 ~ 601 ~ 7/86 ~ 20-6 ~ 2010 ~ 12015 ~ 14010 ~ 80
                                                                                            ShapeStraight / Dual-Fit DowelSpring PinsStraight / Dual-Fit DowelStraight / Dual-Fit DowelStraight / Dual-Fit DowelTaperedStraight / Dual-Fit DowelStraight / Dual-Fit DowelTaperedPlastic (Insulation)Straight / Dual-Fit DowelSpring PinsStraight / Dual-Fit DowelStraight / Dual-Fit DowelStraight / Dual-Fit DowelStraight / Dual-Fit DowelTaperedTaperedStraight / Dual-Fit DowelStraight / Dual-Fit DowelStraight / Dual-Fit DowelStraight / Dual-Fit DowelStraight / Dual-Fit DowelSteppedPlastic (Insulation)Straight / Dual-Fit DowelStraight / Dual-Fit DowelSpring PinsStraight / Dual-Fit DowelStraight / Dual-Fit DowelSpring PinsSpring PinsStraight / Dual-Fit DowelStraight / Dual-Fit DowelStraight / Dual-Fit DowelStraight / Dual-Fit DowelSpring Pins-Straight / Dual-Fit DowelStraight / Dual-Fit DowelSpecialized ToolsStraight / Dual-Fit DowelStraight / Dual-Fit DowelTaperedStraight / Dual-Fit Dowel
                                                                                            End ShapeTappedStandardStandardStandardStandardTappedTappedTappedStandardStandardTappedStandardStandardStandardTappedStandardStandardStandardStandardTappedStandardStandardTappedStandard / TappedStandardStandardStandardStandardTappedTappedStandardStandardStandardTappedTappedStandardStandardStandardStandardStandard-StandardTappedTappedTapped
                                                                                            Outer Dia. (Max.)(mm)-2.25 ~ 10.6---------2.25 ~ 13.7---------2.25 ~ 6.4-----1.2 ~ 13.7--1.2 ~ 13.71.2 ~ 6.4----1.6 ~ 8.41.6 ~ 10.45-------
                                                                                            MaterialStainless Steel ~ SteelStainless Steel ~ SteelSteelStainless SteelStainless SteelEN 1.1217 Equiv. Steel for cold workingStainless Steel ~ SteelStainless SteelStainless Steel ~ SteelPlasticStainless SteelSteelSteelStainless Steel ~ SteelSteelStainless Steel ~ SteelSteelSteelStainless SteelStainless Steel ~ SteelStainless Steel ~ SteelSteelStainless Steel ~ SteelStainless Steel ~ SteelPlasticStainless Steel ~ SteelSteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless Steel ~ SteelStainless SteelSteelSteelSteelSteelSteelSteelSteelStainless Steel-Stainless Steel ~ SteelSteelSteelSteel
                                                                                            Properties-RegularRegular--------Light Load--Regular--Regular---Regular-----RegularRegular-RegularLight Load---RegularRegularRegularRegular------
                                                                                            Outer Dia. (Min.)(mm)-2.15 ~ 10.3---------2.15 ~ 13.4---------2.15 ~ 6.2-----1.1 ~ 13.4--1.1 ~ 13.41.1 ~ 6.2-------------
                                                                                            Surface Treatment-Not ProvidedNot Provided-----Not Provided--Not ProvidedNot Provided-Not ProvidedNot ProvidedNot ProvidedNot Provided--Not ProvidedPhosphate Coating----Not ProvidedNot Provided / Phosphate CoatingNot Provided-Tempered Collar / Glossy FinishingGlossy FinishingNot ProvidedNot ProvidedNot ProvidedNot ProvidedBlack Oxide-----Not ProvidedNot ProvidedNot Provided
                                                                                            Sales UnitLow Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.) ~ Box, Pkg.Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.) ~ Box, Pkg.Low Quantity (Available beginning with 1 pc.) ~ Box, Pkg.Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.) ~ Box, Pkg.Low Quantity (Available beginning with 1 pc.) ~ Box, Pkg.Low Quantity (Available beginning with 1 pc.) ~ Box, Pkg.Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.) ~ Box, Pkg.Box, Pkg.Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.) ~ Box, Pkg.Low Quantity (Available beginning with 1 pc.) ~ Box, Pkg.Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.) ~ Box, Pkg.Low Quantity (Available beginning with 1 pc.) ~ Box, Pkg.Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.) ~ Box, Pkg.Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.)Low Quantity (Available beginning with 1 pc.) ~ Box, Pkg.Low Quantity (Available beginning with 1 pc.) ~ Box, Pkg.

                                                                                            Loading...

                                                                                            Related Categories to Dowel Pins, Spring Pins, Stepped Pins