(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Adjuster Bolt（Page3）
| Days to Ship |
|
|---|
-
Stainless steel horn type fixed adjustment pad
MISUMI
- Stainless steel horn type fixed adjustment pad
- The part number is C-NFJNS.
- Body Material: Stainless Steel.
- Nominal of Thread size (M): 8, 10, 12, 16 and 20.
- Thread Length size: 60, 70, 75, 100 and 130 mm.
- Screw is smooth and can be manually for assembly.
- the stainless-steel adjustment pad is a component commonly used in various industrial and engineering applications.
- The use of stainless steel as the material for these pads ensures high strength, corrosion resistance, and durability.- Volume Discount
Standard Price: 129,534 IDR- Days to Ship: 18 Day(s) -
Standard Price: 293,406 IDR- Days to Ship: 18 Day(s) -
MISUMI
- Universal type adjustment pad.
- The series part number is C-LEMNT
- Type: Adjusting Bolt Type.
- Body Material: Carbon Steel.
- Body Surface Treatment: Galvanize solution.
- Nominal of Thread size (M): 10, 12 and 16.
- Thread Length size: 75 and 100 mm.
- Screw is smooth and can be manually for assembly.
- Carbon steel is chromate plated for bright appearance and better corrosion resistance.
- In some applications, adjustable pads are used to level, support, or align different components or machinery.- Volume Discount
Standard Price: 238,226 IDR- Days to Ship: 18 Day(s) or more -
Standard Price: 175,419 IDR Days to Ship: 39 Day(s) -
Leveling Mounts Metal Body, Universal Type
MISUMI
[Features]
·Cost-effective adjuster- Volume Discount
Standard Price: 308,548 IDR- Days to Ship: 10 Day(s) -
Standard Price: 4,303,556 IDR- Days to Ship: 8 Day(s) or more -
KURASHIKI KAKO
[Features]
· Demonstrates high vibration-proofing performance with a compact body.
· An LM type handle that also facilitates level adjustments.- CAD ：
- 2D
Standard Price: 622,180 IDR- Days to Ship: 8 Day(s) or more -
KURASHIKI KAKO
Demonstrates high vibration-proofing performance with a compact body. Selection is possible from a wide variety to suit the application.
- CAD ：
- 2D
Standard Price: 501,472 IDR- Days to Ship: 8 Day(s) or more -
NANSIN
An adjuster for medium to high loads.
[Features]
· A bolt optimized for operating environment and material quality lineup.
[Applications]
· For fixing products such as plant machinery or ATM.
· Longer lifespan of caster.Standard Price: 83,160 IDR- Days to Ship: 12 Day(s) or more -
NABEYA BI-TECH
- FCM/FCF series Leveling adjuster with plastic pad.
- Part number for series including of FCM, FCM-G, FCF and FCF-G type.
- Threaded Material: Steel SUM22L.
- Thread Surface Treatment: Trivalent Chromate solution.
- Lock nut: S45C, trivalent chromate treatment
- Body Pad Material: Glass fiber reinforced nylon6 (Black color)
- The pad tilts up to 15°. Effective for use on slopes.
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 40, 50, 63, 80, 100 and 125 mm.Standard Price: 88,117 IDR- Days to Ship: Same day or more -
Engineering Plastic Leveling Pad (LSA32,LSAR32)
IMAO CORPORATION
[Features]
· Since stainless steel products have a low sulfide content, they are suitable for applications in which hygiene and corrosion due to weather are concerns, such as for medical equipment, food related devices, and in the medicine industry.Standard Price: 87,119 IDR- Days to Ship: Same day or more -
Engineering Plastic Leveling Pad (LVA70, LVAR70)
IMAO CORPORATION
Features an excellent design and the allowable load is guaranteed even in a tilted state. Stainless steel products use SUS304 that is excellent for rust prevention. Ideal for medical equipment and food devices. Note: The CAD data for this series is being revised. This data will be made available as soon as modifications have been completed.
Standard Price: 142,615 IDR- Days to Ship: 13 Day(s) or more -
Engineering Plastic Leveling Pad (LVF100, LVFR100)
IMAO CORPORATION
Features an excellent design and the allowable load is guaranteed even in a tilted state. Anchor type.
Standard Price: 341,422 IDR- Days to Ship: 13 Day(s) or more -
Engineering Plastic Leveling Pad (Includes Adjustment Knob) (LVA70-ELK and LVAR70-ELK)
IMAO CORPORATION
Features an excellent design.
[Features]
· Height adjustments are performed by manually turning a knob.
· Falling off is prevented by a washer on the end surface of the screw part.Standard Price: 701,483 IDR Days to Ship: 8 Day(s) or more -
Engineering Plastic Leveling Pad (LSA25, LSAR25)
IMAO CORPORATION
Features an excellent design and is ideal for compact devices and equipment. Stainless steel products use SUS304 that is excellent for rust prevention. Ideal for medical equipment and food devices. Note: The CAD data for this series is being revised. This data will be made available as soon as modifications have been completed.
Standard Price: 84,991 IDR- Days to Ship: Same day or more -
Engineering Plastic Leveling Pads (LVA80,LVAR80)
IMAO CORPORATION
Features an excellent design and the allowable load is guaranteed even in a tilted state. Stainless steel products use SUS304 that is excellent for rust prevention. Ideal for medical equipment and food devices. Note: The CAD data for this series is being revised. This data will be made available as soon as modifications have been completed.
Standard Price: 122,865 IDR- Days to Ship: Same day or more -
Engineering Plastic Leveling Pad (LVF125, LVFR125)
IMAO CORPORATION
Features an excellent design and the allowable load is guaranteed even in a tilted state. Anchor type.
[Features]
· The SUS-made uses SUS304 that is excellent for rust prevention.Standard Price: 467,927 IDR- Days to Ship: 13 Day(s) or more -
Engineering Plastic Leveling Pad (LVF80,LVFR80)
IMAO CORPORATION
Features an excellent design and the allowable load is guaranteed even in a tilted state. Anchor type.
[Features]
· Since stainless steel products have a low sulfide content, they are suitable for applications in which corrosion due to weather is a concern.Standard Price: 123,003 IDR- Days to Ship: Same day or more -
IMAO CORPORATION
Features an excellent design. A luxurious matte finish
[Features]
· The SUS-made uses SUS304 that is excellent for rust prevention.
· Since the sulfide content is low, it is suitable for applications in which hygiene and corrosion due to weather are concerns, such as for medical equipment, food related devices, and in the medicine industry.
· There are adjustment wrench hangers in two locations (upper part: hex hole, lower part: width across flats).
· Luxurious matte finishStandard Price: 731,501 IDR- Days to Ship: 13 Day(s) or more -
Engineering Plastic Leveling Pad (LSA40,LSAR40)
IMAO CORPORATION
Features an excellent design and is ideal for compact devices and equipment. Stainless steel products use SUS304 that is excellent for rust prevention. Ideal for medical equipment and food devices. Note: The CAD data for this series is being revised. This data will be made available as soon as modifications have been completed.
Standard Price: 92,529 IDR- Days to Ship: Same day or more -
Engineering Plastic Leveling Pad (LVA125, LVAR125)
IMAO CORPORATION
Features an excellent design and the allowable load is guaranteed even in a tilted state. Stainless steel products use SUS304 that is excellent for rust prevention. Ideal for medical equipment and food devices. Note: The CAD data for this series is being revised. This data will be made available as soon as modifications have been completed.
Standard Price: 466,724 IDR- Days to Ship: 13 Day(s) or more -
LVA60, LVAR60 Engineering Plastic Leveling Pads
IMAO CORPORATION
Features an excellent design and the allowable load is guaranteed even in a tilted state. Stainless steel products use SUS304 that is excellent for rust prevention. Ideal for medical equipment and food devices. Note: The CAD data for this series is being revised. This data will be made available as soon as modifications have been completed.
Standard Price: 114,517 IDR- Days to Ship: Same day or more -
NABEYA
- Foot Jack Type FAJK.
- Part number for series including of FAJK, FAJK-P, FAJK-S and FAJK-SP.
- Product Type: Adjusting Bolt standard and Adjusting Bolt with bottom pad.
- Thread Material: SUM22L (Zinc die cast Powder coated) and SUS304 Stainless steel.
- Nut Material: S45C Carbon Steel and SUS304.
- Base Material: Toughened Polyacetal.
- Bottom Pad Material: NBR rubber (only for FAJK-S and FAJK-SP type).
- Nominal of Thread size (M): 12, 16 and 20.
- Thread Length size: 66, 100, 125, 150 and 200 mm.Standard Price: 407,602 IDR- Days to Ship: 9 Day(s) or more -
NABEYA
A semi-order type in which bolt diameter, bolt length, and pad diameter can be selected and combined.
Standard Price: 218,689 IDR- Days to Ship: 9 Day(s) or more -
NABEYA
A semi-order type in which bolt diameter, bolt length, and pad diameter can be selected and combined.
Standard Price: 115,073 IDR- Days to Ship: 8 Day(s) or more -
Standard Price: 137,604 IDR- Days to Ship: 9 Day(s) or more -
NABEYA
A leveling jack with a large adjustment stroke and outstanding strength.
[Features]
· The adjustment stroke is large and can be used where ground subsidence is extreme.
· Can be fixed with an anchor bolt.
· An FCD550 ductile base is used and has outstanding strength.
· A spherical receiver head that makes precise adjustments smooth.
· Displacement value in relation to load is small (0.03 at 50kN)Standard Price: 3,708,511 IDR Days to Ship: 9 Day(s) or more -
NABEYA
A leveling foot jack that can be used together with an anchor bolt. Convenient for adjusting the levels of machine tools.
[Features]
· Convenient for adjusting the levels of machine tools.
· Can be used together with an anchor bolt.
· Ductile casting is used for the base plate and the load resistance is sufficient.
· The adjustment stroke is large and can be used where ground subsidence is extreme.- CAD ：
- 2D
Standard Price: 737,287 IDR- Days to Ship: 9 Day(s) or more -
NABEYA
Ideal for the leveling of large machinery such as large milling machines, turning machines, and boring machines.
[Features]
· Features good precision.
· Can be fixed with an anchor bolt.
· Ideal for large machinery such as large milling machines, turning machines, boring machines, and planer machines.- CAD ：
- 2D
Standard Price: 2,549,440 IDR- Days to Ship: 8 Day(s) or more -
the Anti-Vibration Wedge Mount (Type C)
NABEYA
A wedge mount featuring a precise leveling mechanism, large adjustment stroke, and vibration-proof function.
- CAD ：
- 2D
Standard Price: 3,980,228 IDR- Days to Ship: 10 Day(s) or more -
Anti-Vibration Wedge Mount (F Model)
NABEYA
A wedge mount featuring a precise leveling mechanism, large adjustment stroke, and vibration-proof function.
[Features]
· Has a high load resistance.
· A precision leveling wedge mount that features a precise leveling mechanism, a large stroke, and a vibration-proof function.- CAD ：
- 2D
Standard Price: 3,776,403 IDR- Days to Ship: 10 Day(s) or more -
NABEYA
- Foot Jack Type FAJ.
- Part number for series including of FAJ, FAJ-P, FAJ-S and FAJ-SP.
- Product Type: Adjusting Bolt standard and Adjusting Bolt with bottom pad.
- Body Material: SUM22L Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Zinc die cast powder coating for SUM22L Carbon Steel.
- Bottom Pad Material: NBR rubber (only for FAJ-S and FAJ-SP type).
- Nominal of Thread size (M): 12, 16 and 20.
- Thread Length size: 66, 100, 125, 150 and 200 mm.Standard Price: 347,110 IDR- Days to Ship: 9 Day(s) or more -
NABEYA
- Foot Jack Type FPJ.
- Part number for series including of FPJ, FPJ-P, FPJ-S and FPJ-SP.
- Product Type: Adjusting Bolt standard and Adjusting Bolt with bottom pad.
- Thread Material: SUM22L Carbon Steel (Zinc Plating) and SUS304 Stainless steel.
- Nut Material: S45C Carbon Steel and SUS304.
- Base Material: Toughened Polyacetal.
- Bottom Pad Material: NBR rubber (only for FPJ-S and FPJ-SP type).
- Nominal of Thread size (M): 12, 16 and 20.
- Thread Length size: 66, 100, 125, 150 and 200 mm.Standard Price: 204,587 IDR- Days to Ship: 9 Day(s) or more -
NABEYA
A semi-order type in which bolt diameter, bolt length, and pad diameter can be selected and combined.
Standard Price: 139,642 IDR- Days to Ship: 9 Day(s) or more -
NABEYA
A leveling block that can also be used sideways or upside down.
[Features]
· Can also be used sideways or upside down.
· An attachment can be mounted to the tapped hole on the top surface and for which point contacts can also be adjusted.
· Can also be used for the centering of workpieces when cutting or to prevent chattering.Standard Price: 2,189,155 IDR Days to Ship: 8 Day(s) or more -
NABEYA
[Features]
· Compensates for sloped installation surfaces with a spherical receiver plate.
· The spherical part has undergone precision processing with a contact ratio of 65% or higher.
· The spherical receiver plate and top plate are made of ductile cast iron that is hard to damage.
· Lifting amount (adjustment amount) is set to 10 mm, which is the highest in its class.
· Employs a thrust needle bearing and special washer to enable operation with a load of 100kN.- CAD ：
- 2D
Standard Price: 6,915,093 IDR- Days to Ship: 9 Day(s) or more -
NABEYA
Includes a horizontal deviation / vertical deviation preventing mechanism.
[Features]
· The parts are precisely processed to have parallelism, so precise fine adjustments can be made.
· The overall height is made as low as possible to provide outstanding stability.
· The product features a horizontal deviation / vertical deviation mechanism and displacement with regards to dynamic loads is minimal.
· Can also be fixed using an anchor bolt.
· Ideal for five-face machining devices, large grinding machines, various dedicated machinery, large printing machines, measurement machinery, etc.Standard Price: 5,211,603 IDR- Days to Ship: 8 Day(s) or more -
Anti-Vibration Wedge Mount, PKD (Bolt Through Type)
NABEYA
[Features]
· A type for fixing machinery and bases.
· A vibration-proof wedge mount that features a precise leveling mechanism, a large adjustment stroke, and a vibration-proof function.- CAD ：
- 2D
Standard Price: 6,035,098 IDR- Days to Ship: 10 Day(s) or more -
Anti-Vibration Wedge Mount (D Model)
NABEYA
[Features]
· A vibration-proof wedge mount that features a precise leveling mechanism, a large adjustment stroke, and a vibration-proof function.- CAD ：
- 2D
Standard Price: 3,986,473 IDR- Days to Ship: 10 Day(s) or more -
NABEYA
A vibration-proof foot jack that in which a high performance foamed polyurethane pad is used. Higher performance than rubber pads.
[Features]
· A foot jack with a leveling mechanism and vibration-proofing function.
· Higher performance than rubber pad products.
· Features superior solution resistance and will not transfer onto floors.
· Since the bolt connection is flexible, it can absorb the sloping of the floor.
· Three types of pads are available to satisfy conditions for vibration frequency, machine type, and weight.Standard Price: 133,826 IDR- Days to Ship: 8 Day(s) or more -
NABEYA
- Foot Jack Type FPJK
- Part number for series including of FPJK, FPJK-P, FPJK-S and FPJK-SP.
- Product Type: Adjusting Bolt standard and Adjusting Bolt with bottom pad.
- Thread Material: SUM22L (Zinc Plating) and SUS304 Stainless steel.
- Nut Material: S45C Carbon Steel and SUS304.
- Base Material: Toughened Polyacetal.
- Bottom Pad Material: NBR rubber (only for FPJK-S and FPJK-SP).
- Nominal of Thread size (M): 12, 16 and 20.
- Thread Length size: 66, 100, 125, 150 and 200 mm.Standard Price: 220,214 IDR- Days to Ship: 9 Day(s) or more -
NABEYA
Ideal for the leveling of equipment, etc. Three types are available: S45C, resin pad, and SUS.
Standard Price: 227,815 IDR- Days to Ship: 8 Day(s) or more -
Foot Jack FJK Model (Fixed Type)
NABEYA
Can be fixed with an anchor bolt.
[Features]
· A hex nut is press-fitted to the bottom of the base to enable quick assembly with an impact wrench, etc.
· Can be fixed using an anchor boltStandard Price: 146,956 IDR- Days to Ship: 8 Day(s) or more -
Standard Price: 59,153 IDR- Days to Ship: 8 Day(s) or more -
NABEYA
[Features]
· The flexibility of the bolt connection can absorb the slope of the floor.
· A leveling element featuring a leveling mechanism and vibration-proof function.
Three types of elements are available to meet the applicable vibration frequency, machine type, and weight.
· They are, from the lowest supported frequency to the highest, P30W, P4, and P0.
· The bolt and nut can be selected from the leveling screws for flexible connection, BNVRBF.- CAD ：
- 2D
Standard Price: 549,718 IDR- Days to Ship: 10 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Thread Length L1(mm) |
| Nominal of Thread M(mm) |
| Type |
| Main Body Height E(mm) |
| Adjusting Bolt Shape Type |
| Body Material |
| Properties |
| Bottom Rubber Material |
| Mounting Shape Type |
| Thread Material |
| Main Body Surface Treatment |
| Swivel Angle θ(deg) |
| Height Adjusting Handle |
| Thread Surface Treatment |
| Swivel Mechanism |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | KURASHIKI KAKO | KURASHIKI KAKO | KURASHIKI KAKO | NANSIN | NABEYA BI-TECH | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | IMAO CORPORATION | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA | NABEYA |
| Product Series | Engineering Plastic Leveling Pad (Includes Adjustment Knob) (LVA70-ELK and LVAR70-ELK) | ||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||
| Days to Ship | 18 Day(s) | 18 Day(s) | 18 Day(s) or more | 39 Day(s) | 10 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 12 Day(s) or more | Same day or more | Same day or more | 13 Day(s) or more | 13 Day(s) or more | 8 Day(s) or more | Same day or more | Same day or more | 13 Day(s) or more | Same day or more | 13 Day(s) or more | Same day or more | 13 Day(s) or more | Same day or more | 9 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 9 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more |
| Thread Length L1(mm) | 60 ～ 100 | 100 | 100 | 100 | 100 ～ 180 | - | 85 ～ 220 | 90 ～ 200 | 50 ～ 170 | 40 ～ 125 | 43 ～ 168 | 43 ～ 168 | 98 ～ 198 | 78 | 43 ～ 168 | 43 ～ 198 | 95 ～ 198 | 43 ～ 198 | 75 ～ 150 | 43 ～ 168 | 98 ～ 198 | 43 ～ 198 | 66 ～ 200 | 40 ～ 200 | 40 ～ 200 | - | - | 71 ～ 114 | - | - | - | 66 ～ 200 | 66 ～ 200 | 40 ～ 200 | - | - | - | - | - | 60 ～ 100 | 66 ～ 200 | - | 50 ～ 180 | 40 ～ 75 | - |
| Nominal of Thread M(mm) | 8 ～ 20 | 12 ～ 16 | 12 ～ 16 | 12 | 16 ～ 24 | - | 12 ～ 20 | 12 ～ 20 | 8 ～ 20 | 8 ～ 16 | 8 ～ 16 | 8 ～ 16 | 20 ～ 24 | 16 | 8 ～ 16 | 8 ～ 24 | 20 ～ 30 | 8 ～ 24 | 16 ～ 24 | 8 ～ 16 | 20 ～ 30 | 8 ～ 24 | 12 ～ 20 | 8 ～ 20 | 8 ～ 20 | - | M45XP2.0 | 28 ～ 45 | - | - | - | 12 ～ 20 | 12 ～ 20 | 8 ～ 20 | - | - | - | - | - | 8 ～ 20 | 12 ～ 20 | 10 ～ 20 | 12 ～ 16 | 16 | 10 ～ 20 |
| Type | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Precision Instrument | Mounting | Mounting | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | - | Adjusting Bolt | Adjusting Bolt | Precision Instrument | Precision Instrument | Precision Instrument | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Precision Instrument | Precision Instrument | Precision Instrument | Precision Instrument | Precision Instrument | Adjusting Bolt | Adjusting Bolt | Others | Adjusting Bolt | Adjusting Bolt | Mounting |
| Main Body Height E(mm) | 11 ～ 20 | 14 | 24 ～ 30 | 15 | - | 47 ～ 75 | 47 ～ 76 | 35 ～ 56 | 20 ～ 25 | 4 ～ 8.5 | 16 | 19 | 24 | 19 | 12 | 24 | 45 ～ 46 | 24 | 14.5 ～ 20 | 18 | 45 ～ 46 | 24 | 18 | 18 | 18 | - | 85 | 100 ～ 153 | 65 ～ 94 | 55 ～ 600 | 55 ～ 600 | 18 | 18 | 18 | 50 | 77 ～ 110 | 64.5 ～ 121 | 56 ～ 154 | 55 ～ 600 | 15.5 ～ 18.5 | 18 | 5 ～ 9 | 17 | 45 ～ 91 | 21 ～ 33 |
| Adjusting Bolt Shape Type | Standard | Anchor Bolt Mounting Type | Standard | Standard | Standard | - | - | - | Rubber Foot Type | Standard / Rubber Foot Type | Standard / Rubber Foot Type | Standard / Rubber Foot Type | Anchor Bolt Mounting Type | Rubber Foot Type | Standard / Rubber Foot Type | Standard / Rubber Foot Type | Anchor Bolt Mounting Type | Anchor Bolt Mounting Type | Rubber Foot Type | Standard / Rubber Foot Type | Standard / Rubber Foot Type | Standard / Rubber Foot Type | Standard / Rubber Foot Type | Standard / Rubber Foot Type | Standard / Rubber Foot Type | - | Anchor Bolt Mounting Type | Anchor Bolt Mounting Type | - | - | - | Standard / Rubber Foot Type | Standard / Rubber Foot Type | Standard / Rubber Foot Type | - | - | - | - | - | Rubber Foot Type | Standard / Rubber Foot Type | Standard | Standard | Standard | - |
| Body Material | Stainless Steel | Stainless Steel | Steel | Steel | Stainless Steel | Cast Iron | Cast Iron | Steel | Steel | Nylon 6 | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Polyamide | Stainless Steel | Polyamide | Polyamide | Polyamide | Zinc Alloy | Zinc Alloy | Others | - | Cast Iron | Cast Iron | - | Cast Iron | Cast Iron | Zinc Alloy | Others | Others | - | Cast Iron | - | Cast Iron | Cast Iron | Stainless Steel / Steel | Others | Stainless Steel / Steel / Others | Stainless Steel / Steel | Steel | Cast Iron |
| Properties | Standard | Standard | Standard | Standard | - | Standard | Standard / Oil Resistance / Vibration Control | Standard / Oil Resistance / Vibration Control | Standard | Standard | Standard / Corrosion Resistance | Standard / Corrosion Resistance / Electrical Conductivity | Standard / Corrosion Resistance | Standard | Standard / Corrosion Resistance | Standard / Corrosion Resistance / Electrical Conductivity | Standard / Corrosion Resistance | Standard / Corrosion Resistance | Corrosion Resistance | Standard / Corrosion Resistance | Standard / Corrosion Resistance / Electrical Conductivity | Standard / Corrosion Resistance / Electrical Conductivity | - | - | - | - | Standard | Standard | Standard | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control | - | - | - | Standard | Standard | Standard | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control | Oil Resistance / Chemical Resistance / Vibration Control | - | - | Standard | Standard | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control |
| Bottom Rubber Material | - | - | - | - | - | Synthetic Rubber | Chloroprene Rubber | Chloroprene Rubber | Synthetic Rubber | - | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | - | - | - | - | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | Nitrile Rubber | - | - | - | Nitrile Rubber | Nitrile Rubber | Elastomer | Nitrile Rubber | - | - | - | Nitrile Rubber |
| Mounting Shape Type | - | - | - | - | - | - | Rubber Mount Type | Rubber Mount Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Rubber Mount Type |
| Thread Material | Stainless Steel | Stainless Steel | Steel | Steel | Stainless Steel / Steel | - | Steel | Steel | Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | - | - | Steel | - | - | - | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | - | - | - | - | - | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | - |
| Main Body Surface Treatment | Not Provided | Not Provided | Zinc Plating | Zinc Plating | Buffed / Zinc Plating / Chrome Plating | Paint | Melamine Baked Paint | Melamine Baked Paint | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Others | Others | Not Provided | - | - | Not Provided | - | Paint | Paint | Others | Not Provided | Not Provided | - | - | - | Paint | Paint | Electrolytic Polishing / Paint | Not Provided | Not Provided / Black Oxide | Electrolytic Polishing / Bright Chromate Plating | Chromate Plating | Paint |
| Swivel Angle θ(deg) | - | - | 15 | - | 15° | - | - | - | - | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 4 ～ 30 | 30 | 12 | 30 | 16 ～ 30 | 30 | 10 | 30 | 30 | - | - | - | - | - | - | 10 | 10 | 30 | - | - | - | - | - | - | 10 | 20 | - | - | - |
| Height Adjusting Handle | Not Provided | Not Provided | Not Provided | Not Provided | - | - | Provided | Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | - | - | - | Not Provided | Not Provided | Not Provided | - | - | - | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Thread Surface Treatment | Not Provided | Not Provided | Zinc Plating | Zinc Plating | Buffed / Zinc Plating | - | Bright Chromate Plating | Bright Chromate Plating | - | Trivalent Chromate | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | - | - | Not Provided | - | - | - | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | - | - | - | - | - | Electrolytic Polishing / Electrostatic Paint | Not Provided / Zinc Plating | Not Provided / Black Oxide | Electrolytic Polishing / Bright Chromate Plating | Chromate Plating | - |
| Swivel Mechanism | Not Provided | Not Provided | Provided | Not Provided | Provided | - | - | - | - | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | - | Not Provided | Not Provided | - | - | - | Provided | Provided | Provided | - | - | - | - | - | Not Provided | Provided | Provided | Not Provided | Not Provided | - |
Loading...
Configure
Specification/Dimensions
-
Thread Length L1(mm)
- 9
- 11.5
- 11.6
- 14
- 16
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 21.5
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 28
- 29
- 29.5
- 30
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 39.5
- 40
- 41
- 42
- 43
- 45
- 49.5
- 50
- 51
- 51.5
- 52
- 53
- 54
- 56
- 58
- 59.5
- 60
- 61
- 62
- 63
- 65
- 66
- 67.5
- 68
- 69.5
- 70
- 71
- 71.5
- 72
- 73
- 75
- 78
- 80
- 85
- 90
- 91
- 95
- 98
- 99.5
- 100
- 101.5
- 108
- 110
- 114
- 117.5
- 120
- 122
- 124
- 125
- 126
- 127
- 129
- 130
- 132
- 132.5
- 135.5
- 136
- 138
- 142
- 144
- 145
- 148
- 150
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 162
- 162.5
- 165.5
- 168
- 170
- 172
- 174
- 175
- 176
- 177
- 179
- 180
- 182
- 182.5
- 184
- 185.5
- 186
- 198
- 200
- 206
- 207
- 209
- 210
- 212
- 212.5
- 215.5
- 220
- 250
- 280
- 300
- 350
[80-300/10mm Unit(s)]
-
Nominal of Thread M(mm)
-
Type
-
Main Body Height E(mm)
- 4
- 5
- 5.4
- 6
- 7
- 8
- 8.5
- 9
- 9.5
- 9.7
- 9.8
- 10
- 10.5
- 11
- 11.2
- 12
- 12.5
- 13
- 13.5
- 13.7
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 17.7
- 18
- 18.5
- 19
- 20
- 20.5
- 20.7
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 26
- 27
- 27.5
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31
- 31.5
- 32
- 32.5
- 33
- 33.2
- 34
- 34.5
- 35
- 35.4
- 35.5
- 36
- 36.5
- 37
- 37.5
- 39
- 40
- 41
- 42
- 42.5
- 43
- 44
- 44.5
- 45
- 46
- 46.5
- 47
- 48.5
- 50
- 51
- 52
- 53
- 54
- 55
- 55.5
- 56
- 57
- 58
- 60
- 60.5
- 61
- 62
- 62.5
- 63
- 64
- 64.5
- 65
- 66
- 67
- 67.5
- 69
- 70
- 70.5
- 71
- 72
- 73
- 75
- 76
- 76.5
- 77
- 77.5
- 78.5
- 79
- 80
- 81
- 82.5
- 83
- 83.5
- 84.5
- 85
- 90
- 91
- 92
- 93
- 94
- 95
- 97
- 99.5
- 100
- 101
- 101.5
- 102.5
- 104
- 105
- 106
- 106.5
- 107
- 108
- 108.5
- 109
- 110
- 111
- 112
- 112.5
- 113.5
- 114.5
- 115
- 116
- 117
- 117.5
- 119
- 119.5
- 120.5
- 121
- 122
- 122.5
- 123
- 125
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 140.5
- 143
- 144
- 145
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 154.5
- 155
- 156
- 156.5
- 157
- 158
- 158.5
- 159
- 160
- 160.5
- 161
- 162
- 163
- 163.5
- 165
- 168
- 170
- 173
- 175
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 184.5
- 185
- 186
- 186.5
- 187
- 188
- 188.5
- 189
- 190
- 190.5
- 192
- 193
- 193.5
- 195
- 195.5
- 198
- 200
- 207
- 208
- 210
- 211
- 214
- 215
- 216.5
- 217
- 218
- 220
- 222
- 225
- 225.5
- 227
- 228
- 230
- 231
- 232
- 234
- 234.5
- 235
- 236
- 236.5
- 237
- 238
- 238.5
- 240
- 242
- 243
- 243.5
- 245
- 245.5
- 248
- 250
- 330
- 400
- 500
- 600
-
Adjusting Bolt Shape Type
-
Body Material
-
Properties
-
Bottom Rubber Material
-
Mounting Shape Type
-
Thread Material
-
Main Body Surface Treatment
-
Swivel Angle θ(deg)
-
Height Adjusting Handle
-
Thread Surface Treatment
-
Swivel Mechanism
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Adjuster Bolt
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy