(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Adjuster Bolt（Thread Material：Steel）
| Days to Ship |
|
|---|
-
- Recommendation
Leveling Mounts Metal Pad Standard
MISUMI
- Economy series Adjuster Flat bottom standard type
- Type: Adjuster Bolt and Flat bottom.
- Part number for series including of C-CNFJN and C-CNFJNS.
- Body Material: Q235 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Zinc Plating for Q235 Carbon Steel.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 80, 100, 120, 150 and 200 mm.
- Screw is smooth and can be manually for assembly.
- This is an economy series; The price is cheaper than the MISUMI standard product.- Volume Discount
Standard Price: 15,701 IDR- Days to Ship: Same day -
- Recommendation
Leveling Mounts Metal Pad For Heavy Load
MISUMI
- Economy series Adjuster Heavy load type.
- Type: Adjuster Bolt.
- Part number for series including of C-CFJFN and C-CFJFNS.
- Body Material: Q235 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Zinc Plating (For Thread and body with Q235 Carbon Steel).
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 50, 80, 100, 120, 150, 180 and 200 mm.
- This is an economy series; The price is cheaper than the MISUMI standard product.- Volume Discount
Standard Price: 33,482 IDR- Days to Ship: Same day or more -
Leveling Mounts For Heavy Load With Anti-Slip Rubber
MISUMI
- Economy series Leveling Mounts for Heavy Load With Anti-Slip Rubber
- Type: Adjusting Bolt with Rubber Foot.
- Part number for series including of C-CFJFNV and C-CFJFNVS.
- Body Material: Q235 Carbon Steel and Stainless steel.
- Surface Treatment: Trivalent Chromate solution for Q235 Carbon Steel.
- Bottom Material: Rubber
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 50, 80, 100, 120, 150, 180 and 200 mm.
- This is an economy series; The price is cheaper than the MISUMI standard product.- Volume Discount
Standard Price: 42,565 IDR- Days to Ship: Same day or more -
- On Sale Till 31/03/2025
MISUMI
- Leveling Mount/Heavy Load
- Product Type: Adjusting Bolt.
- Part number for series including of FJFN, FJFNS, FJFNB, FJFNF and FJFNH.
- Body Material: SS400 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Trivalent Chromate solution for SS400 Steel.
- Nominal of Thread size (M): 10, 12, 16, 20 and 24.
- Thread Length size75, 100, 125, 130, 150 and 180 mm.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.
- The Leveling Mounts: RoHS compliant.- Volume Discount
Special Price Days to Ship: Same day or more -
MISUMI
- Adjustment Pads/Fixed Type
- Product type: Adjusting Bolt.
- Part number for series including of FJKN (Steel) and FJKNS (Stainless steel).
- Body Material: SS400 steel and stainless steel SUS304.
- Surface Treatment: Trivalent Chromate solution for SS400 steel.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 75, 100, 125, 130 150 and 180 mm.
- Screw shaft turns independently of the base and tilts slightly.
- This Adjustment Pad type has one hole is machined for drive-in.- Volume Discount
Standard Price: 57,371 IDR- Days to Ship: Same day -
- On Sale Till 31/03/2025
MISUMI
- Adjustment Pads/Two Hole Type.
- Part number for series including of FJWN and FJWNS.
- Body Material: SS400 steel and stainless steel SUS304.
- Surface Treatment: Trivalent Chromate solution and Electrolytic Polishing.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 75, 100, 125, 130, 150 and 180 mm.
- This series designed two holes are machined for drive-in anchors.
- Screw shaft turns independently of the base and tilts slightly.
- For Adjustment Pads type: RoHS compliant.- Volume Discount
Standard Price: 110,918 IDR- Special Price Days to Ship: Same day or more -
Leveling Mounts Anti-Vibration
MISUMI
- Economy series Leveling Mounts, Anti-Vibration.
- Type: Adjusting Bolt with Rubber Foot.
- Part number for series including of C-CFJSN and C-CFJSNS.
- Body Material: Q235 Carbon Steel and Stainless steel.
- Body Surface Treatment: Black plating for Q235 Carbon Steel.
- Bottom Pads Part: Rubber.
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 60, 80, 100, 120, 150, 180 and 200 mm.
- This is an economy series; The price is cheaper than the MISUMI standard product.- Volume Discount
Standard Price: 37,483 IDR- Days to Ship: Same day or more -
Heavy load type fixed adjustment pad
MISUMI
- Economy series Heavy duty type fixed adjustment pad.
- The part number is C-FJFN2.
- Body Material: Carbon Steel.
- Body Surface Treatment: Galvanize solution.
- Thread Length size: 100 and 130 mm.
- Economy series production, not RoHS compliant, preferential price, 30% cheaper than standards products.
- Screw is smooth and can be manually for assembly.
- Carbon steel is chromate plated for bright appearance and better corrosion resistance.
- In some applications, adjustable pads are used to level, support, or align different components or machinery.- Volume Discount
Standard Price: 113,741 IDR- Days to Ship: Same day or more -
- On Sale Till 31/03/2025
MISUMI
- Leveling Mount/Standard type.
- Part number for series including of NFJN, NFJNS and NFJNF type.
- Type of product : Adjusting Bolt.
- Body Material: SS400 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Trivalent Chromate (SS400) and Electrolytic Polishing (SUS304)
- Nominal of Thread size (M): 5, 6, 8, 10, 12, 16 and 20.
- Thread Length size: 30, 40, 50, 60, 75, 80, 100, 125, 130, 150, 180, 200, 250 and 300 mm.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.- Volume Discount
Special Price Days to Ship: Same day or more -
Leveling Mounts Bottom Flat With Rubber
MISUMI
- Economy series Leveling Mounts Bottom Flat with Rubber.
- Type: Adjusting Bolt with Rubber Foot.
- The part number is C-CFJGN.
- Body Material: Q235 Carbon Steel.
- Body Surface Treatment: Zinc Plating solution.
- Bottom Pads Part: Rubber.
- Nominal of Thread size (M): 8, 10, 12, 16 and 20.
- Thread Length size: 60, 80, 100, 120, 150 and 200 mm.
- Screw is smooth and can be manually for assembly.
- This is an economy series; The price is cheaper than the MISUMI standard product.- Volume Discount
Standard Price: 34,651 IDR- Days to Ship: Same day -
Standard Price: 23,470 IDR- Days to Ship: Same day or more -
Leveling Mounts Metal Pad With Positioning Holes
MISUMI
[Features]
·Cost-effective adjuster- Volume Discount
Standard Price: 77,046 IDR- Days to Ship: 10 Day(s) or more -
ORII AND MEC
For the stable installation of facilities and equipment, and demonstrates excellent vibration-proofing and sound proofing effects.
[Features]
· The "Level pad" is a vibration isolation table with a highly reliable design that has a wide range of leveling functions.
Ideal for the stable installation of equipment and also demonstrates excellent vibration-proofing and sound proofing effects.
· Suppresses vibrations and noise transmitted to the floor and contributes to improvements in the precision and long life of equipment.
· Since the vibration-proof rubber is split into four segments, effective vibration-proofing can be carried out.
· The vibration-proof rubber can be replaced.
· Vibration-proofing effects can be enhanced by doubling the layer of rubber.
· A universal washer (spherical washer) is used for the attachment base.
· Will horizontally support machinery even on tilted floors (allowable slope angle is 3 degrees).
· Level adjustments can be performed easily with the cross-shaped handle.- CAD ：
- 2D
Standard Price: 4,122,088 IDR Days to Ship: Same day -
Leveling Mounts PVC Yellow Pad
MISUMI
- Economy series Leveling Mounts with Yellow PVC Foot pad type.
- Type: Adjusting Bolt with PVC Foot pad.
- The part number is C-CPVC.
- Body Material: Q235 Carbon Steel.
- Body Surface Treatment: Zinc Plating solution.
- Bottom Pads Part material: Yellow PVC.
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 50, 80, 100, 120, 150, 180 and 200 mm.
- PVC yellow pad is harder than ordinary rubber, with excellent load performance.- Volume Discount
Standard Price: 39,987 IDR- Days to Ship: Same day or more -
Leveling Mounts Anti-Vibration Rubber
MISUMI
- Economy series Leveling Mounts, Anti-Vibration Rubber.
- Type: Adjusting Bolt with Rubber Foot pad.
- The part number is C-CFBR.
- Body Material: Q235 Carbon Steel.
- Body Surface Treatment: Zinc Plating solution.
- Bottom Pads Part: Rubber.
- Nominal of Thread size (M): 12, 16, 20 and 24.
- Thread Length size: 100, 120, 150, 180 and 200 mm.
- Screw is smooth and can be manually for assembly.
- This is an economy series; The price is cheaper than the MISUMI standard product.- Volume Discount
Standard Price: 105,755 IDR- Days to Ship: Same day or more -
- On Sale Till 31/03/2025
MISUMI
- Leveling Mount Non- Slip Type
- Part number for series including of is FJGN, FJGM, FJGNS and FJGMS.
- Body Material: SS400 Steel and SUS304 Stainless steel.
- Body Surface Treatment: Trivalent Chromate and Electrolytic Polishing.
- Rubber Material: Elastomer, Neoprene, Non-Migration Chloroprene Rubber, Electrically Conductive Rubber, PVC (Dark Blue).
- Nominal of Thread size (M): 8, 10, 12, 16 and 20.
- Thread Length size: 50, 75, 100, 125, 130, 150 and 180 mm.
- Screw shaft turns independently of the base and tilts slightly.- Volume Discount
Standard Price: 38,247 IDR- Special Price Days to Ship: Same day or more -
- On Sale Till 31/03/2025
MISUMI
- Rubber Base Leveling Mounts
- Part number for series including of is FJSN, FJSM, FJSNS and FJSMS.
- Main body Material: SS400 Steel and SUS304 Stainless steel.
- Main body Surface Treatment: Electrodeposited Paint (Black), Electrolytic Polishing.
- Rubber Material: Neoprene, Silicon, Polyacetal, Non-Migration Chloroprene Rubber and Electrically Conductive Rubber
- Nominal of Thread size (M): 8, 10, 12, 16 and 20.
- Thread Length size: 50, 60, 70, 75, 100 and 130 mm.
- Rubber type is not selectable for FJSNS and FJSN (Neoprene rubber only).- Volume Discount
Standard Price: 53,547 IDR- Special Price Days to Ship: Same day or more -
Leveling Mounts PVC Yellow Pad, With 2 Holes
MISUMI
- Economy series Leveling Mounts, PVC Yellow Pad, With 2 Holes.
- Type: Adjusting Bolt with PVC Foot pad.
- The part number is C-CPVCH
- Body Material: Q235 Carbon Steel.
- Body Surface Treatment: Zinc Plating solution.
- Bottom Pads Part: Yellow PVC.
- Nominal of Thread size (M): 12, 16, 20 and 24.
- Thread Length size: 100, 120, 150, 180 and 200 mm.
- This Adjustment Pad type has 2 hole is machined for drive-in.
- PVC yellow pad is harder than ordinary rubber, with excellent load performance.- Volume Discount
Standard Price: 136,686 IDR- Days to Ship: Same day or more -
Horn type fixed adjustment pad
MISUMI
- Horn type fixed adjustment pad.
- The part number is C-NFJN.
- Body Material: Carbon Steel.
- Body Surface Treatment: Galvanize solution.
- Nominal of Thread size (M): 8, 10, 12, 16 and 20.
- Thread Length size: 60, 70, 75, 100 and 130 mm.
- Screw is smooth and can be manually for assembly.
- Carbon steel is chromate plated for bright appearance and better corrosion resistance.
- In some applications, adjustable pads are used to level, support, or align different components or machinery.- Volume Discount
Standard Price: 62,376 IDR- Days to Ship: 18 Day(s) -
- On Sale Till 31/03/2025
Adjuster for Heavy Weights D-C/D-C, S
DAIWARASHI
A standard type adjuster for heavy loads
[Features]
· The receiver is a forged item.
· Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
· D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
· Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.- CAD ：
- 2D
Standard Price: 89,516 IDR- Special Price Days to Ship: Same day or more -
MISUMI
[Features]
·Cost-effective adjuster- Volume Discount
Standard Price: 83,460 IDR- Days to Ship: 10 Day(s) -
Adjuster Feet/Tapped Socket Type
MISUMI
- Adjuster Feet/Tapped Socket Type.
- Part number for series including of LEMN, LEMS and LEMT type.
- Type of product : Adjusting Bolt.
- Body Material: Nylon Plastic, Carbon Steel and SUS303 Stainless steel.
- Socket Material: SUM24, SUM23 and SUS303.
- Socket Surface Treatment: Trivalent Chromate and electroless Nickel Plating.
- Nominal of Thread size (M): 6, 8, 10, 12 and 16.
- Thread Length size: 40, 50, 63, 80, 100 and 125 mm.
- This product can be used as a strike plate to fix the adjustment bolt.- Volume Discount
Standard Price: 89,882 IDR- Days to Ship: Same day or more -
Heavy load type anti-vibration all-rubber bottom fixed adjustment pad
MISUMI
- Heavy load type anti-vibration all-rubber bottom fixed adjustment pad
- The part number is C-FBR.
- Bottom Material: Rubber
- Thread Material: Carbon steel.
- Thread Surface Treatment: Galvanize solution.
- Nominal of Thread size (M): 12, 16 and 20.
- Thread Length size: 70, 100 and 130 mm.
- Screw is smooth and can be manually for assembly.
- Carbon steel is chromate plated for bright appearance and better corrosion resistance.
- In some applications, adjustable pads are used to level, support, or align different components or machinery.- Volume Discount
Standard Price: 134,301 IDR- Days to Ship: Same day or more -
MISUMI
- Tabletop Leveling Mounts
- Product type: Mounting.
- The part number is NFB.
- Main Body Material: PP Resin plastic.
- Tabletop Leveling Mounts Thread Material is SS400 Carbon steel.
- Thread Surface Treatment: Trivalent Chromate solution.
- Nominal of Thread size (M): 5, 6, 8 and 10
- Tabletop Leveling Mounts Body Color: Black.
- Screws and pads are integrated, and Hex nut included.
- For Leveling Mounts type: RoHS10 compliant.
- Pads intended to fix lightweighted equipment, such as desktop type inspection tools.- Volume Discount
Standard Price: 26,773 IDR- Days to Ship: Same day or more -
Tabletop Leveling Mounts/Grip Type
MISUMI
- Tabletop Leveling Mounts/Grip Type
- Product type: Mounting.
- The part number is NFBG.
- Main Body Material: Polyacetal plastic.
- Bottom Material: Elastomer rubber.
- Thread Material is SWCH steel.
- Thread Surface Treatment: Trivalent Chromate solution.
- Nominal of Thread size (M): 6, 8 and 10 (Coarse).
- Grip Body Color: Black and white.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.
- The product with a leveling function. Less slippery than the existing products.- Volume Discount
Standard Price: 57,945 IDR- Days to Ship: Same day or more -
Standard Receiver Adjuster With Plastic D-AII/D-BII
DAIWARASHI
A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
[Features]
· Does not stain or damage floors since a special plastic is molded into the receiver.
· The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
· Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.- CAD ：
- 2D
Standard Price: 75,881 IDR- Days to Ship: 11 Day(s) or more -
- On Sale Till 31/03/2025
Adjuster Feet/Resin Rubber Type
MISUMI
- Adjuster Feet/Resin Rubber Type
- Part number for series including of AJPD, AJPDS, AJPDR and AJPDSR.
- Body Material: SS400 steel and stainless steel SUS304.
- Surface Treatment: Trivalent Chromate solution for SS400 steel.
- Bottom Material: Reinforced Polyacetal for Pad Bottom and NBR for Rubber Pad.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 60, 70, 80, 100, 130, 150 and 180 mm.
- Tiltable in all 360° directions.
- Use of the Rubber Pad Type in full ground contact will be less slippery.- Volume Discount
Standard Price: 183,588 IDR- Special Price Days to Ship: Same day or more -
- On Sale Till 31/03/2025
MISUMI
- Adjuster Feet/Resin Rubber Type
- Product type: Adjusting Bolt.
- Part number for series including of LEMNS(Steel) and LEMNT (Stainless steel).
- Body, Thread, and nut Material: S45C steel and stainless steel SUS304.
- Body, Thread and Surface Treatment: Trivalent Chromate solution for S45C steel.
- Nominal of Thread size (M): 10, 12 and 16.
- Thread Length size: 75, 100 and 130 mm.
- Tiltable in all 360° directions.
- The screw shaft is tilted to allow use on angled floor surfaces.- Volume Discount
Standard Price: 173,024 IDR- Special Price Days to Ship: Same day or more -
Adjuster, Anchor Fixing, With Non-Shake Thread Section, D-J-EII
DAIWARASHI
An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.- CAD ：
- 2D
Standard Price: 112,909 IDR- Days to Ship: 22 Day(s) or more -
Adjuster for Heavy Weights (Wide Base Plate Type), D-CIII/D-CIII and S/D-CIII-W
DAIWARASHI
A wide base type adjuster for heavy weights that is stable and that can distribute the load to the floor. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
[Features]
· The receiver of the stainless steel D-C III is a forged item.
· D-C III S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- CAD ：
- 2D
Standard Price: 189,900 IDR- Days to Ship: 8 Day(s) or more -
Adjuster, Standard Receiver, Small Diameter Type D-F/D-F-C
DAIWARASHI
An adjuster whose screw and base have small diameters
[Features]
· Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
· Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
· A light load type with a receiver diameter that is also small.
· Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.- CAD ：
- 2D
Standard Price: 37,604 IDR- Days to Ship: 19 Day(s) or more -
GIFU SANKEN KOGYO
[Features]·This is a leveling mount for the casters JM-65/75.
Standard Price: 164,578 IDR Days to Ship: 12 Day(s) or more -
Adjustment Pads/Space Saving Type
MISUMI
- Leveling Mounts-Space Saving Type.
- The part number is NFJNCT.
- Type of product : Adjusting Bolt.
- Material: SS400 steel Equivalent.
- Leveling Mounts Surface Treatment: Trivalent Chromate Solution.
- Nominal of Thread size (M): 8, 10, 12 and 16.
- Thread Length size: 50, 75, 100, 125, 130, 150 and 180 mm.
- Screw shafts can turn independently of a base and can tilt 3 to 5 degrees.
- Carbon steel is chromate plated for bright appearance and better corrosion resistance.- Volume Discount
Standard Price: 87,969 IDR- Days to Ship: Same day or more -
Standard Receiver Type Adjuster D-A/D-B
DAIWARASHI
The most general standard type adjuster
[Features]
· The screw shaft rotates and tilts somewhat.
· A standard type that can be used as the adjustment bolt for any machinery.
· The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.
· D-A supports screw diameters M16 and M20, and D-B supports screw diameter M12.- CAD ：
- 2D
Standard Price: 51,060 IDR- Days to Ship: 8 Day(s) or more -
TRUSCO NAKAYAMA
· A light load type of the most general adjuster.
· Machine tools, vending machines, conveyors, work benches, computer racks, control panels, and scientific instruments.Standard Price: 48,833 IDR- Days to Ship: 8 Day(s) or more -
- On Sale Till 31/03/2025
Leveling Mounts - Resin Rubber Type
MISUMI
- Leveling Mounts - Resin Rubber Type.
- The part number is C-AJPJG
- Adjusting Bolt Shape Type: Rubber Foot Type.
- Thread Material: Carbon Steel.
- Thread Surface Treatment: Galvanize solution.
- Pad Bottom Material: Nylon rubber.
- Nominal of Thread size (M): 8, 10, 12, 16 and 20.
- Thread Length size: 50, 80, 100 and 150 mm.
- Tiltable in all 360° directions.
- Screw is smooth and can be manually for assembly.
- Carbon steel is chromate plated for bright appearance and better corrosion resistance.- Volume Discount
Standard Price: 119,524 IDR- Special Price Days to Ship: Same day or more -
Standard Price: 89,789 IDR- Days to Ship: 39 Day(s) -
Leveling Mounts Nylon Pad, Universal Type
MISUMI
- Economy series Leveling Mounts, Nylon Pad, Universal Type.
- Type: Adjusting Bolt with Nylon Pad.
- Part number for series including of C-CAJPD and C-CAJPDS type.
- Threaded and nut Material: Q235 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Zinc Plating for Q235 Carbon Steel.
- Adjuster Part material: Nylon Pad.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 80, 100, 120, 150 and 200 mm.
- This is an economy series; The price is cheaper than the MISUMI standard product.
- Economy series Leveling Mounts, Nylon Pad
- Type: Adjusting Bolt with Nylon Pad.
- Part number for series including of C-CFJLM and C-CFJLMS type.
- Threaded and nut Material: Q235 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Zinc Plating for Q235 Carbon Steel.
- Adjuster Pad Part material: Nylon.
- Nominal of Thread size (M): 8, 10, 12, 16, 20 and 24.
- Thread Length size: 50, 80, 100, 120, 150, 180 and 200 mm.
- This is an economy series; The price is cheaper than the MISUMI standard product.- Volume Discount
Standard Price: 36,805 IDR- Days to Ship: Same day -
- On Sale Till 31/03/2025
Engineering Plastic Leveling Pads (LVA80,LVAR80)
IMAO CORPORATION
Features an excellent design and the allowable load is guaranteed even in a tilted state. Stainless steel products use SUS304 that is excellent for rust prevention. Ideal for medical equipment and food devices. Note: The CAD data for this series is being revised. This data will be made available as soon as modifications have been completed.
Standard Price: 122,865 IDR- Special Price Days to Ship: Same day or more -
- On Sale Till 31/03/2025
Foot Jack FJB Type (Rubber Base Type)
NABEYA
A rubber base foot jack. Features a slipping prevention effect and light vibration-proofing properties.
[Features]
· A Phillips head slot has been provided on the bottom of the base and assembly can be done quickly with an impact wrench, etc.
· A nylon washer is built in to the base upper surface enabling operations to be performed smoothly.
· The bottom part rubber features liquid resistance (gasoline, kerosene, acids, alkaline substances) and can be used from -20°C to 120°C.
· The bottom part rubber features a slipping prevention effect, cushioning properties, and light vibration-proofing properties.Standard Price: 81,000 IDR- Special Price Days to Ship: Same day or more -
Adjuster for Heavy Loads (Bearing Equipped) D-H
DAIWARASHI
An adjuster for heavy weights with a built-in thrust bearing
[Features]
· Suitable for the adjustment of heavy machinery.
· Stability is outstanding since a large diameter bolt is used.
· Smooth adjustments can be made even for non-heavy machinery.- CAD ：
- 2D
Standard Price: 572,823 IDR- Days to Ship: 8 Day(s) or more -
DAIWARASHI
A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."
[Features]
· A special adjuster for walls.
· Please use together with D-D II.
· Please use accessories such as hex nuts, etc.
· The portion that makes contact with the wall is folded.
· As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
· In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.
· Please refer to the drawings for use.- CAD ：
- 2D
Standard Price: 55,118 IDR- Days to Ship: 11 Day(s) or more -
Adjuster Pad - Rotary Type, Nylon Pad Bottom
MISUMI
[Features]·The screw shaft is tilted to allow use on angled floor surfaces.
- Volume Discount
Standard Price: 124,304 IDR- Days to Ship: 8 Day(s) or more -
MISUMI
A leveling mount, nylon type. [Specifications]Thread section material: S45C, Thread section surface treatment: zinc plating, Main body material: nylon
- Volume Discount
Standard Price: 93,706 IDR- Days to Ship: 8 Day(s) or more -
Standard Price: 161,711 IDR- Days to Ship: 39 Day(s)
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Thread Length L1(mm) |
| Nominal of Thread M(mm) |
| Type |
| Main Body Height E(mm) |
| Adjusting Bolt Shape Type |
| Body Material |
| Properties |
| Bottom Rubber Material |
| Mounting Shape Type |
| Thread Material |
| Main Body Surface Treatment |
| Swivel Angle θ(deg) |
| Height Adjusting Handle |
| Thread Surface Treatment |
| Swivel Mechanism |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | ORII AND MEC | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | DAIWARASHI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | DAIWARASHI | MISUMI | MISUMI | DAIWARASHI | DAIWARASHI | DAIWARASHI | GIFU SANKEN KOGYO | MISUMI | DAIWARASHI | TRUSCO NAKAYAMA | MISUMI | MISUMI | MISUMI | IMAO CORPORATION | NABEYA | DAIWARASHI | DAIWARASHI | MISUMI | MISUMI | MISUMI |
| Product Series | Heavy load type anti-vibration all-rubber bottom fixed adjustment pad | Adjuster, Anchor Fixing, With Non-Shake Thread Section, D-J-EII | Adjuster for Heavy Weights (Wide Base Plate Type), D-CIII/D-CIII and S/D-CIII-W | ||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Days to Ship | Same day | Same day or more | Same day or more | Same day or more | Same day | Same day or more | Same day or more | Same day or more | Same day or more | Same day | Same day or more | 10 Day(s) or more | Same day | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | 18 Day(s) | Same day or more | 10 Day(s) | Same day or more | Same day or more | Same day or more | Same day or more | 11 Day(s) or more | Same day or more | Same day or more | 22 Day(s) or more | 8 Day(s) or more | 19 Day(s) or more | 12 Day(s) or more | Same day or more | 8 Day(s) or more | 8 Day(s) or more | Same day or more | 39 Day(s) | Same day | Same day or more | Same day or more | 8 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 39 Day(s) |
| Thread Length L1(mm) | 80 ～ 200 | 50 ～ 200 | 50 ～ 200 | 75 ～ 300 | 75 ～ 180 | 75 ～ 180 | 60 ～ 200 | 100 | 30 ～ 300 | 60 ～ 200 | 50 ～ 200 | 50 ～ 150 | 90 | 50 ～ 200 | 100 ～ 200 | 50 ～ 180 | 50 ～ 130 | 100 ～ 200 | 60 ～ 100 | 50 ～ 200 | 50 ～ 150 | - | 100 | 14 ～ 40 | 30 | 75 ～ 200 | 60 ～ 180 | 75 ～ 130 | 50 ～ 180 | 100 ～ 200 | 50 ～ 100 | 52 | 50 ～ 180 | 50 ～ 200 | 11.6 ～ 117.5 | 50 ～ 150 | 50 ～ 100 | 80 ～ 200 | 43 ～ 198 | 50 ～ 130 | 100 ～ 200 | 75 ～ 150 | 60 ～ 130 | 68 ～ 148 | 60 ～ 100 |
| Nominal of Thread M(mm) | 10 ～ 20 | 8 ～ 24 | 8 ～ 24 | 10 ～ 24 | 10 ～ 20 | 10 ～ 20 | 8 ～ 24 | 10 ～ 20 | 5 ～ 20 | 8 ～ 20 | 8 ～ 24 | 12 ～ 20 | 18 | 8 ～ 24 | 12 ～ 24 | 8 ～ 20 | 8 ～ 20 | 12 ～ 24 | 8 ～ 20 | 12 ～ 20 | 12 ～ 16 | 6 ～ 16 | 12 ～ 20 | 5 ～ 10 | 8 | 12 ～ 16 | 10 ～ 20 | 10 ～ 16 | 12 ～ 16 | 16 ～ 30 | 8 ～ 10 | 12 | 8 ～ 16 | 12 ～ 20 | 8 ～ 10 | 8 ～ 20 | 8 ～ 16 | 10 ～ 20 | 8 ～ 24 | 8 ～ 20 | 20 ～ 30 | 12 ～ 16 | 10 ～ 16 | 10 ～ 16 | 8 ～ 12 |
| Type | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Mounting | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Mounting | Mounting | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt | Adjusting Bolt |
| Main Body Height E(mm) | 99.5 ～ 235 | 76.5 ～ 237 | 84.5 ～ 245 | 18 ～ 20 | 18 | 21.5 ～ 23 | 82.5 ～ 234 | 18 | 5.4 ～ 20 | 81 ～ 238 | 78.5 ～ 242 | - | 70 | 83.5 ～ 245.5 | 133 ～ 250 | 15 ～ 25 | 13.5 ～ 17 | 138 ～ 245 | 11 ～ 20 | 17 | - | 14 ～ 44.5 | 25 ～ 35 | 7 ～ 9.5 | 16.5 | 18 ～ 22 | 19 ～ 27 | 22 ～ 32 | 17 | 22 ～ 23 | 12.5 ～ 13.5 | 115 | 11 ～ 20 | 15 ～ 18 | - | 20 ～ 25 | 15 ～ 25 | 110 ～ 236 | 24 | 13.5 ～ 17 | 29.5 ～ 36.5 | 14 ～ 18 | 18 | 20 | 27 ～ 32 |
| Adjusting Bolt Shape Type | Standard | Standard | Rubber Foot Type | - | Anchor Bolt Mounting Type | Rubber Foot & Anchor Bolt Fixing Type | Rubber Foot Type | Standard | Standard | Rubber Foot Type | Standard | Standard | - | Standard | Rubber Foot Type | Rubber Foot Type | Rubber Foot Type | Standard | Standard | Standard | Standard | Tapped Socket Type | Rubber Foot Type | - | - | Standard | Rubber Foot Type | - | Rubber Foot & Anchor Bolt Fixing Type | Standard | Standard | Rubber Foot Type | - | Standard | Standard | Rubber Foot Type | Standard | Standard | Standard / Rubber Foot Type | Rubber Foot Type | Built-in Bearing Type | Anchor Bolt Mounting Type | - | Standard | Standard |
| Body Material | Steel | Stainless Steel / Steel | Stainless Steel / Steel | Steel | Steel | Steel | Stainless Steel / Steel | Steel | Steel | Steel | Nylon 6 | Steel | Cast Iron | Steel | Rubber | Steel | Steel | Stainless Steel | Steel | Steel | Stainless Steel | Steel / Nylon 6 | Rubber | Polypropylene | Other Plastic | Steel | Other Plastic | Steel | Steel | Cast Iron | Steel | Steel | Steel | Steel | Steel | Nylon 6 | Nylon 6 | Nylon 6 | Polyamide | Steel | Steel | Steel | Nylon 6 | Nylon 6 | Steel |
| Properties | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Vibration Control | Standard | Standard | Standard | Standard | Standard | Vibration Control | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | Standard / Electrical Conductivity | Oil Resistance / Chemical Resistance / Heat Resistance / Vibration Control / Impact Resistance | Standard | Standard | Standard | - | Standard |
| Bottom Rubber Material | - | - | Neoprene Rubber / Synthetic Rubber | - | - | - | - | - | - | Synthetic Rubber | - | - | - | Polyvinyl Chloride | Neoprene Rubber / Synthetic Rubber | Chloroprene Rubber / Elastomer / Neoprene Rubber / Others / Synthetic Rubber | Chloroprene Rubber / Polyacetal / Silicon / Neoprene Rubber / Synthetic Rubber | Polyvinyl Chloride | - | - | - | - | - | - | - | ABS Resin | Nitrile Rubber | - | - | - | ABS Resin | - | - | - | - | Synthetic Rubber | - | - | Nitrile Rubber | Neoprene Rubber | - | - | - | - | - |
| Mounting Shape Type | - | - | - | - | - | - | - | - | - | - | - | - | Rubber Mount Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Rubber Mount Type | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Main Body Surface Treatment | Zinc Plating | Zinc Plating / Chrome Plating | Zinc Plating / Chrome Plating | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Black Plating | Zinc Plating | Trivalent Chromate | Zinc Plating | - | Zinc Plating | - | Zinc Plating / Chrome Plating | - | Trivalent Chromate | Paint | Zinc Plating / Chrome Plating | Zinc Plating | Trivalent Chromate | Zinc Plating | Not Provided / Electroless Nickel Plating | Not Provided | - | - | Trivalent Chromate | - | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Zinc Plating | Trivalent Chromate | Trivalent Chromate | - | - | Not Provided | - | Not Provided | Zinc Plating | Trivalent Chromate | Trivalent Chromate | - | - | Zinc Plating |
| Swivel Angle θ(deg) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 7.5 ～ 15 | - | - | - | - | 15 | 15 | - | - | - | - | - | - | - | 15 | 15 | 15 | 30 | - | - | - | 15 | 15 | 15 |
| Height Adjusting Handle | Not Provided | Not Provided | Not Provided | Not Provided / Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | - | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Thread Surface Treatment | Zinc Plating | Zinc Plating | Zinc Plating | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Zinc Plating | Zinc Plating | Trivalent Chromate | Zinc Plating | Zinc Plating | Zinc Plating | - | Zinc Plating | Zinc Plating | Trivalent Chromate | Electrostatic Paint | Zinc Plating | Zinc Plating | Trivalent Chromate | Zinc Plating / Electrostatic Paint_ | Trivalent Chromate / Electroless Nickel Plating | Zinc Plating | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Zinc Plating | Trivalent Chromate | Trivalent Chromate | - | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Trivalent Chromate | Trivalent Chromate | Trivalent Chromate | Zinc Plating | Zinc Plating |
| Swivel Mechanism | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | - | - | Not Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Provided | Provided | Not Provided | Not Provided | Not Provided | Provided | Provided | Provided |
Loading...
Configure
Specification/Dimensions
-
Thread Length L1(mm)
- 9
- 11.5
- 11.6
- 14
- 16
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 21.5
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- 31
- 31.5
- 32
- 33
- 34
- 35
- 36
- 36.5
- 38
- 39.5
- 40
- 41
- 42
- 43
- 45
- 49.5
- 50
- 51
- 51.5
- 52
- 52.5
- 53
- 54
- 56
- 58
- 59.5
- 60
- 61
- 62
- 63
- 65
- 66
- 67.5
- 68
- 69.5
- 70
- 71
- 71.5
- 72
- 73
- 75
- 78
- 80
- 85
- 90
- 91
- 95
- 98
- 99.5
- 100
- 101.5
- 108
- 110
- 114
- 117.5
- 120
- 122
- 124
- 125
- 126
- 127
- 129
- 130
- 132
- 132.5
- 135.5
- 136
- 138
- 142
- 144
- 145
- 148
- 150
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 162
- 162.5
- 165.5
- 168
- 170
- 172
- 174
- 175
- 176
- 177
- 179
- 180
- 182
- 182.5
- 184
- 185.5
- 186
- 198
- 200
- 206
- 207
- 209
- 210
- 212
- 212.5
- 215.5
- 220
- 250
- 280
- 300
[80-300/10mm Unit(s)]
-
Nominal of Thread M(mm)
-
Type
- Adjusting Bolt
- Mounting
- Precision Instrument
- Others
- Adjusting Screw with Rubber Grommet
-
Main Body Height E(mm)
- 4
- 5
- 5.4
- 6
- 7
- 8
- 8.5
- 9
- 9.5
- 9.7
- 9.8
- 10
- 10.5
- 11
- 11.2
- 11.5
- 12
- 12.5
- 13
- 13.5
- 13.7
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 17.7
- 18
- 18.5
- 19
- 20
- 20.5
- 20.7
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 26
- 27
- 27.5
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31.5
- 32
- 32.5
- 33
- 33.2
- 34
- 34.5
- 35
- 35.4
- 35.5
- 36
- 36.5
- 37
- 37.5
- 39
- 40
- 41
- 42
- 42.5
- 43
- 44
- 44.5
- 45
- 46
- 46.5
- 47
- 48.5
- 50
- 51
- 52
- 53
- 54
- 55
- 55.5
- 56
- 60
- 60.5
- 61
- 62
- 62.5
- 63
- 64
- 64.5
- 65
- 66
- 67
- 67.5
- 69
- 70
- 70.5
- 71
- 72
- 73
- 75
- 76
- 76.5
- 77
- 77.5
- 78.5
- 79
- 80
- 81
- 82.5
- 83
- 83.5
- 84.5
- 85
- 85.5
- 91
- 92
- 93
- 94
- 95
- 97
- 99.5
- 100
- 101
- 101.5
- 102.5
- 104
- 105
- 106
- 106.5
- 107
- 108
- 108.5
- 109
- 110
- 111
- 112
- 112.5
- 113.5
- 114.5
- 115
- 116
- 117
- 117.5
- 119
- 119.5
- 121
- 122.5
- 123
- 125
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 140.5
- 142
- 143
- 144
- 145
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 154.5
- 155
- 156
- 156.5
- 157
- 158
- 158.5
- 159
- 160
- 160.5
- 161
- 162
- 163
- 163.5
- 165
- 168
- 170
- 173
- 175
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 184.5
- 185
- 186
- 186.5
- 187
- 188
- 188.5
- 189
- 190
- 190.5
- 192
- 193
- 193.5
- 195
- 195.5
- 198
- 200
- 207
- 208
- 210
- 211
- 214
- 216.5
- 217
- 220
- 222
- 225
- 225.5
- 227
- 228
- 230
- 231
- 232
- 234
- 234.5
- 235
- 236
- 236.5
- 237
- 238
- 238.5
- 240
- 242
- 243
- 243.5
- 245
- 245.5
- 248
- 250
- 400
-
Adjusting Bolt Shape Type
-
Body Material
-
Properties
- Standard
- Corrosion Resistance
- Oil Resistance
- Chemical Resistance
- Heat Resistance
- Vibration Control
- Impact Resistance
- Electrical Conductivity
-
Bottom Rubber Material
-
Mounting Shape Type
-
Thread Material
-
Main Body Surface Treatment
-
Swivel Angle θ(deg)
-
Height Adjusting Handle
-
Thread Surface Treatment
-
Swivel Mechanism
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Adjuster Bolt
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy