Air Nozzles（Material：Stainless Steel）

• 

  Air Blow Nozzle. Male/Female Thread, Knurling, Terminal Block, Non-Annealed

  MISUMI

  ◆Features: You can choose from male thread (annealed or non-annealed), female thread (annealed or non-annealed), knurled iris (annealed), or terminal block (annealed).
  
   *Annealed pipes with an outer diameter of 1.0 to 3.0 can be bent by hand. (Outer diameter 4.0 or more is not allowed)
   The minimum bending radius is outer diameter x 3, and please bend carefully to avoid applying stress to the brazed part.
  
  ◆Air source: Compressor◆Injection shape: Point◆Material: SUS304
  From August 2021, we will be adding nominal size standards.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Spray Nozzles, Circular Spray Pattern - Standard

  MISUMI

  ◆Features: A metal air nozzle that sprays powerful straight air from the hole at the tip.
  ◆Applications: Can be used in high-temperature environments such as removing oil, water droplets, and chips, cooling/drying, and blowing into narrow spaces.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	487,657 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Point Nozzles

  MISUMI

  ◆Features: Point nozzle that can be adjusted at any angle by tightening the hexagonal nut.
  ◆Air source: Compressor◆Injection shape: Point

  CAD ：

  2D / 3D

  Standard Price:	512,519 IDR-
  Days to Ship:	Same day or more

• 

  Rotary Nozzles - Long

  MISUMI

  ◆ Features: Suitable for blowing into cylindrical workpieces.
  Rotates while blowing air, producing more powerful air flow than normal.
      The tip shape can be selected from narrow angle, wide angle, side, or wide angle + side.
      *For the short type, select from [SPNZ].
  ◆ Air Source: Compressor ◆ Heat Resistant Temperature: 60°C.
  
  ◆ For Technical Data, see here.
  ◆ Free sample rental available here
  
  
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	994,439 IDR
  Days to Ship:	8 Day(s) or more

• 

  Air Blow Nozzle Male/Female Thread, Height Adjustment, Strut Clamp Mounting, Duplex Male Thread, Barbed Fitting, Hose Nipple

  MISUMI

  ◆Features: Male/female thread type, height adjustment male/female thread type, post clamp mounting type, 2-core male thread type,     Barb joint type, hose nipple type You can choose from.
      *Pipe with an outer diameter of 1.0 to 3.0 can be bent by hand. (Outside diameter 4.0 or more is not possible)
      Please bend carefully, using the outside diameter x 3 as a guideline for the minimum bending radius.
  ◆Air source: Compressor◆Injection shape: Point◆Material: SUS304
  Nominal size standards will be added from August 2021.
  (*ABNZSL2-8.0 and ABNZS2-8.0 are scheduled to be released on September 20, 2021.)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Air Blow Nozzles - Pipe Nozzles

  MISUMI

  ◆Features: Straight type, male thread type, and female thread type are available.
      *When using male or female thread types, we recommend using a nozzle joint to blow at the desired angle.

  CAD ：

  2D / 3D

  Days to Ship:	17 Day(s) or more

• 

  Air Blow Nozzles - Nozzles with Attachment Plate - 1-Hole Type, 2-Hole Type

  MISUMI

  ◆Features: A product that can be used by directly inserting a tube with an inner diameter of φ2.5.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  High Flow Rate Blower Nozzles

  MISUMI

  Air Nozzles capable of efficiently blowing air from blowers

  CAD ：

  2D / 3D

  Standard Price:	117,960 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Rotary Nozzles - Short

  MISUMI

  "Are intended to blow the air by rotating themselves and thus, can blow the air more strongly than standard nozzles."

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	397,905 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Air Nozzles - Economy Type

  MISUMI

  ◆Features: A simple and inexpensive metal (SUS304) air nozzle.
  [NZAK] has a narrow injection port and the gas spreads out in a fan shape along the slit.
  [NZAL] has a wide injection port and sprays air at a wide angle.
  ◆Applications:
  [NZAK] Steam humidification, drying, air blowing, etc.
  [NZAL] Dustproofing, air blowing, etc.
  ◆Air source: Compressor◆Injection shape: Fan-shaped
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	175,939 IDR-
  Days to Ship:	Same day or more

• 

  Air Nozzles - De Laval Type

  MISUMI

  ◆Features: This air nozzle is capable of blowing at sonic speeds due to its special internal structure.
      A metal air nozzle with powerful ejection force by blowing at the speed of sound.
      Materials include A5052 and SUS303.
  
  ◆Air source: Compressor◆Injection shape: Point
  ◆Maximum working pressure: 0.7MPa◆Heat-resistant temperature: 200℃

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	669,334 IDR
  Days to Ship:	8 Day(s) or more

• 

  Flat Air Nozzle Standard Type, Metal, Casting

  MISUMI

  ◆ Features: SUS304 (cast) air nozzle with flat mounting angle.
  41% more cost-effective than conventional SUS flat nozzles produced by machining, thanks to a revised manufacturing method.
  *Select [AFTSP/AFTSF] for a resin version, or [AFTSA/AFTSS] for an all-machined, non-cast version.
  
  ◆ Applications: For various applications including removal of oil, water droplets, and debris; cooling/drying; air curtains, etc.
  ◆ Air Source: Compressor ◆ Injection Configuration: Straight
  ◆ Max. Operating Pressure: 0.4 MPa ◆ Heat Resistant Temperature: 200°C
  
  ◆ For Technical Data, see here.
  ◆ Free sample rental available here
  
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	1,702,020 IDR
  Days to Ship:	8 Day(s) or more

• 

  Nozzle Joints

  MISUMI

  ◆Features: A flexible metal joint that can be fixed in any position.
      Loosen the cap, move the ball and tighten it to fix it in any position.
      The adjustable angle range is 50°. Can be used for both air and liquid.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	831,887 IDR-
  Days to Ship:	Same day or more

• 

  Slit Steel Pipe Nozzles

  MISUMI

  ◆Features: A simple nozzle with a slit in the copper tube. Suitable for use when the distance to the target is close.
  ◆Precautions for use
  Actual jet width, collision force, etc. may vary. Also, the slit width may widen depending on air pressure, etc.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Pipe Nozzles/Steel Pipes for Air Nozzles

  MISUMI

  [Features]·This shaved steel pipe can be fitted with a nozzle.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Radial Air Nozzles

  MISUMI

  "Air Nozzles enabling air blow in a radial form. For the injection direction, either of three patterns is selectable."

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	286,857 IDR
  Days to Ship:	8 Day(s) or more

• 

  Flat Air Nozzle Standard Type, Metal, Machined

  MISUMI

  Standard Type of Metal Air Nozzle

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	2,868,573 IDR
  Days to Ship:	8 Day(s) or more

• 

  Nozzles with Swaged Sleeve Couplings

  MISUMI

  "Can blow the air from the copper pipe efficiently, by attaching to the pipe."

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	221,837 IDR
  Days to Ship:	8 Day(s) or more

• 

  [Clean & Pack]Flow Rate Control Nozzle

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■ Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  ◆Features: The flow rate can be adjusted without using a speed controller.
      This product has lock mechanism to fix at arbitrary positions.
  
  ◆ Air Source: Compressor ◆ Injection Configuration: Point
  ◆Heat Resistant Temperature: 60°C
  
  ◆ For Technical Data, see here.
  ◆See here for product video
  
  
  

  • Volume Discount

  Standard Price:	372,990 IDR
  Days to Ship:	10 Day(s) or more

• 

  Insert Nozzle PM Type

  NABEYA

  Screw-in type nozzle. 10-MPa high-pressure type. It can stably lean 35 degrees forward or back, left or right.　
  
  [Features]
  · 10MPa high-pressure type

  Standard Price:	1,506,663 IDR
  Days to Ship:	9 Day(s) or more

• 

  Steel Pipe Nozzles - Both Ends Threaded / Tapped, One End Threaded One End Tapped

  MISUMI

  [Features]·This steel pipe nozzle can blow through holes drilled at regular intervals. ·The mounting angle is flat.

  CAD ：

  2D / 3D

  Days to Ship:	17 Day(s) or more

• 

  Flow Rate Control Nozzles

  MISUMI

  Air Nozzles which allow for adjustment of the flow rate.

  CAD ：

  2D / 3D

  Standard Price:	315,097 IDR
  Days to Ship:	8 Day(s) or more

• 

  [Clean & Pack]Nozzles with Swaged Sleeve Fitting

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■ Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  ◆Features: A SUS304 nozzle that can be connected directly to a pipe and is recommended for pinpoint blowing.
      By mounting it to the tip of the copper pipe, the air efficiency can be improved compared to when using only the copper pipe.
      The tip shape is selectable from slit (SKNF) and single hole (SKNS).
  
  ◆ Air Source: Compressor ◆ Injection Configuration: Point
  ◆ Max. Operating Pressure: 0.7 MPa ◆ Heat Resistant Temperature: 200°C
  
  ◆See here for Technical Data (SKNF)
  ◆See here for Technical Data (SKNS)
  
  
  

  • Volume Discount

  Standard Price:	259,807 IDR-
  Days to Ship:	10 Day(s) or more

• 

  [Clean & Pack]Flat Air Nozzles - Standard, Metal, Casting

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■ Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  ◆ Features: SUS304 (cast) air nozzle with flat mounting angle.
  ◆ Applications: For various applications including removal of oil, water droplets, and debris; cooling/drying; air curtains, etc.
  ◆ Air Source: Compressor ◆ Injection Configuration: Straight
  ◆ Max. Operating Pressure: 0.4 MPa ◆ Heat Resistant Temperature: 200°C
  
  ◆ For Technical Data, see here.
  
  
  

  • Volume Discount

  Standard Price:	1,331,190 IDR-
  Days to Ship:	10 Day(s) or more

• 

  [Clean & Pack]Steel Hollows for Air Nozzles

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■ Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  [Features]·Steel pipe that a nozzle can be attached due to the tapping.

  Days to Ship:	13 Day(s) or more

• 

  Insert Nozzle PM-ST Type

  NABEYA

  Screw-in nozzle. 10-MPa high-pressure type. Can stably tilt 35 degrees forward or back, left or right.
  
  [Features]
  · 10 MPa high-pressure type

  Standard Price:	720,257 IDR
  Days to Ship:	9 Day(s) or more

• 

  Single Type Air Jet Nozzle KSV

  EVERLOY

  A single holed structure with little in the way of clogging. A supersonic nozzle designed along divergent nozzle lines. Making the tip into a tapered shape helps prevent the speed from dropping.
  

  Standard Price:	595,707 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Compact MX Series for Compressor

  DAIKOKENNETU

  With the Double-slit method, two processes can be done with one nozzle, which makes it possible to execute tasks such as water drainage almost perfectly.
  

  Standard Price:	4,881,349 IDR-
  Days to Ship:	16 Day(s) or more

Loading...