Safety Valves, Control Valves（Supply Side, Screw Connection Types：Rc）

• 

  Safety Relief Valve, AL-150TML Series

  YOSHITAKE

  Uses a lift valve lever mechanism for manually performing blowout inspections. The valve body/valve seat and adjustment spring are made from stainless steel. Anti-corrosive SCS14A is used in the main parts.

  Standard Price:	3,309,167 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Safety Valve, Relief Valve AL-150 Series

  YOSHITAKE

  [Features]
  ・ It is a versatile type that supports fluids such as steam, air, water, and oil
  ・ The pressure division was subdivided, and ultra-precise finishing by advanced technology was realized to pursue the best performance
  ・ Main parts (valve body, valve seat) and adjustment spring are made of stainless steel, and SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for main parts
  ・ The sealed structure prevents fluid from leaking to the outside

  Standard Price:	1,851,492 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Air Vent Valve, TA-3/TA-6 Series

  YOSHITAKE

  Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

  CAD ：

  2D

  Standard Price:	1,840,053 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pressure Reducing Valve for Steam, Gas and Liquid, RD-3H Series

  VENN

  [Features]
  · Pilot type direct-acting, pressure-reducing valve that is used in non-controllable, small flow-rate locations. It has good pressure-control with excellent wide pressure range adjustment characteristics. The main parts are made from SUS (for steam).
  · Note: These valves differ for use with stream, air, vapor, and liquid.

  Standard Price:	4,759,726 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Pressure Reducing Valves (Steam), GD-6N Series

  YOSHITAKE

  Small, and lightweight, with constant secondary pressure accuracy even at small capacities. · The valve body and valve seat have superior durability thanks to the use of stainless steel.
  
  [Features]
  Constant secondary pressure accuracy does not change even at small capacities.
  · Compact and lightweight.
  · The valve body and valve seat have superior durability thanks to the use of stainless steel.
  · A screen (60 mesh) is built in to protect the valve body and seat from foreign material, pipe scales, and pipe chips.

  CAD ：

  2D

  Standard Price:	5,956,333 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves for Hot and Cold Water, GD-26-NE Series

  YOSHITAKE

  Corrosion-resistant materials are used in the liquid-contacting parts. Superior chlorine resistance and reliability for running cold and hot water. The valve utilizes pressure-balanced structure. Therefore, secondary side pressure is maintained at a fixed level without affecting the primary side pressure.

  CAD ：

  2D

  Standard Price:	5,087,072 IDR-
  Days to Ship:	11 Day(s) or more

• 

  AF-4 Series Air Vent Valve

  VENN

  The equipment is used in building facilities and factory facilities, etc. It is an air vent valve for fluids. It automatically discharges the air that accumulates in the pipes and the air inside an airtight tank and makes the fluid flow smoothly.
  
  [Features]
  ▪ Due to the improved airtightness, it has adopted the swing valve body.
  ▪ The amount of air discharged from the equipment is comparatively large.
  ▪ It has a simple structure that allows easy handling.
  · AF-4CN is a rust-resistant nylon-coated product.

  Standard Price:	1,943,333 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Air Vent for Steam - AW2 Type

  MIYAWAKI

  [Features]
  ·Rapid air evacuation shortens equipment start-up time.
  [Applications]
  ·It can be used for steam piping and various devices.

  Standard Price:	4,080,000 IDR
  Days to Ship:	22 Day(s) or more

• 

  Safety Relief Valve, AL-140T Series

  YOSHITAKE

  [Features]
  ・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability
  ・ A soft seat is used for the main part, and it has excellent airtightness in the valve seat
  ・ It is ideal for applications where valve seat leakage cannot be tolerated
  ・ The sealed structure prevents fluid from leaking to the outside

  CAD ：

  2D

  Standard Price:	7,674,833 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve (Steam) GD-30 Series

  YOSHITAKE

  This small, lightweight, direct-acting pressure-reducing valve incorporates a stainless steel valve body and valve seat, uses an external-pressure bellows in its detection component, and has excellent durability.

  CAD ：

  2D

  Standard Price:	4,267,159 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pressure Reducing Valves (Steam), GD-45 Series

  YOSHITAKE

  Small, lightweight, and can be used at primary pressures up to 2.0MPa. Screens (60 mesh) are built in to protect the valve body and seat from dust etc.
  
  [Features]
  · Compact and lightweight.
  · Can be used at temporary pressures up to 2.0 MPa.
  · A screen (60 mesh) is built in to protect the valve body and seat from foreign material, etc.
  · External pressure bellows are used in the pressure detecting part, so operating performance is excellent.

  CAD ：

  2D

  Standard Price:	4,149,833 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves for Hot and Cold Water / Oil/Air, GD-6 Series

  YOSHITAKE

  Small, and lightweight, with constant secondary pressure accuracy even at small capacities.

  CAD ：

  2D

  Standard Price:	5,980,000 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve (For Cold and Hot Water) GD-24GS/GD-24GS-N Series

  YOSHITAKE

  A hanging metal type. A pressure reducing valve without sliding parts. Requires maintenance of consumable parts only.

  Standard Price:	4,971,657 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Direct Acting Steam Pressure Reducing Valve - RE1 Type

  MIYAWAKI

  [Features]
  ・ Ultra compact and lightweight design, about half the size and weight of conventional products
  ・ Reliable operation, effective in saving energy and improving productivity
  ・ Increased rated flow rate by devising original orifice plate
  ・ The control bellows by original device has excellent durability
  ・ The handle is made of special plastic, easy to grip and shape with excellent heat dissipation
  ・ Sharp and simple design. Plus forged body is perfect for beautiful styling
  ・ Improved gaskets make maintenance easier
  ・ One of the attractions of this performance is that it is inexpensive
  [Applications]
  ・ Cleaning / apparel industry
  ・ Food industry / dyeing industry
  ・ Ideal for heating equipment, sterilizers, rubber vulcanizers, etc.

  Standard Price:	7,744,334 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Air Vent, 11-AV Series

  YOSHITAKE

  Operates at a greater output across a wide range of pressures. The free-floating lever is less prone to wearing. The valve body and valve seat are made of highly durable hardened chrome steel.

  CAD ：

  2D

  Standard Price:	5,554,500 IDR
  Days to Ship:	8 Day(s) or more

• 

  Air Vent, 22-AV Series

  YOSHITAKE

  [Features]
  ・ It has wider operating pressure range and more discharge than conventional products
  ・ Compact and lightweight design for easy installation
  ・ Due to the adoption of the free floating lever system, there is no wear of the lever part, and since hardened chrome steel is used for the valve body and valve seat, it has excellent durability
  ・ The valve body has a ball shape and excellent sealing properties
  ・ It can be used even if the specific gravity of the fluid is light

  Standard Price:	22,572,667 IDR
  Days to Ship:	12 Day(s) or more

• 

  Nylon Coated Air Release Valve, TA-2C Series

  YOSHITAKE

  Equipped with a rapid exhaust mechanism to rapidly expel from air inside the pipe at the time of initial water throughput, thus easing water throughput.

  CAD ：

  2D

  Standard Price:	4,360,833 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Nylon Coated Air Release Valve, TA-3C Series

  YOSHITAKE

  Operates at a wide range of pressures, allowing use from low to high pressures. The valve seat uses a synthetic rubber disk, preventing leakage from the valve, but as a precautionary measure a screw has been added to mount the copper tube fitting onto the top part of the valve seat.

  CAD ：

  2D

  Standard Price:	3,025,500 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Relief Valve, AL-250 Series

  YOSHITAKE

  [Features]
  ・ Since it is entirely made of stainless steel, it has excellent corrosion resistance and durability
  ・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations. Chattering and hunting are reduced
  ・ It has stable operation against back pressure changes during continuous blowing

  CAD ：

  2D

  Standard Price:	15,245,500 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Relief Valve, AL-260R Series

  YOSHITAKE

  [Features]
  ・ Main parts are made of stainless steel, and all wetted parts are made of corrosion resistant material
  ・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations
  ・ Chattering and hunting are reduced
  ・ It has stable operation against back pressure changes during continuous blowing
  ・ Since the AL-260R type is a handle type, it is easy to change the pressure

  Standard Price:	5,290,125 IDR-
  Days to Ship:	22 Day(s) or more

• 

  Relief Valve, AL-260 Series

  YOSHITAKE

  [Features]
  ・ Main parts are made of stainless steel, and all wetted parts are made of corrosion resistant material
  ・ By adopting a dashpot structure, it has a great effect on lines with large pulsations and pressure fluctuations
  ・ Chattering and hunting are reduced
  ・ It has stable operation against back pressure changes during continuous blowing

  Standard Price:	5,093,667 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-140H Series

  YOSHITAKE

  [Features]
  · All stainless steel, anti-corrosive SCS14A is used for the main sections.
  · The sealed construction prevents fluid from leaking out.
  · AL-140H can accommodate a set pressure of MAX 2.0 MPa.

  Standard Price:	11,447,345 IDR-
  Days to Ship:	22 Day(s) or more

• 

  Safety Valve, Relief Valve AL-140 Series

  YOSHITAKE

  [Features]
  ・ It is made entirely of stainless steel, SCS14A (equivalent to SUS316) with excellent corrosion resistance is used for the main part
  ・ The sealed structure prevents fluid from leaking to the outside

  Standard Price:	6,357,007 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Safety Relief Valve, AL-150L Series

  YOSHITAKE

  [Features]
  · The main parts (valve body and seat) and adjustment springs are made of stainless steel; in particular, the main parts use SCS14A (equivalent to SUS316) which has excellent corrosion resistance.
  · With lift valve lever types, discharge inspections can be performed manually at a pressure that is 75% or more of the discharge pressure.

  CAD ：

  2D

  Standard Price:	2,871,833 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150T-N Series

  YOSHITAKE

  With soft sheeting used in main parts, this valve is optimal for applications that do not permit leakage from the valve seat. The valve/valve seat and adjustment spring are made of stainless steel, with anti-corrosive SCS14A being used in the main section.

  Standard Price:	2,694,500 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150TR Series

  YOSHITAKE

  A handle-operated valve for changing the pressure easily. Usable as a relief valve.
  
  [Features]
  · The AL-150 is a handle-operated valve for changing the pressure easily. Therefore, this valve can be used as a relief valve.
  · Soft seats are utilized in the main parts for a superior valve seat airtight performance.
  · Optimal for applications in which valve seat leaks are unacceptable.
  · The main parts (valve body and seat) and adjustment springs are manufactured from SCS14 stainless steel (SUS316 EQUIV) with excellent anti-corrosive properties.
  · The sealed construction prevents fluid from leaking outside.

  Standard Price:	3,656,335 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-150T Series

  YOSHITAKE

  [Features]
  · Soft seats are utilized in the main parts for a superior valve seat airtight performance. Optimal for applications in which valve seat leaks are unacceptable.
  · The main parts: valve body, seat. and adjustment springs are made from stainless steel. Anti-corrosive SCS14A is used for the main parts.
  · The sealed construction prevents liquid from leaking outside.

  Standard Price:	2,446,333 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Safety Relief Valve, AL-17 Series

  YOSHITAKE

  [Features]
  ・ The main part (valve body, valve seat) is made of stainless steel, so it has excellent corrosion resistance and durability
  ・ The down pressure can be adjusted by seat ring
  ・ It can support set pressures up to 1.6 MPa

  Standard Price:	3,935,500 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Ventilation Valve, TA-2 / TA-5 / TA-5F Series

  YOSHITAKE

  [Features]
  · Includes a rapid air discharge mechanism so during initial water flow, air inside the pipe is rapidly discharged, simplifying water passage.
  · Operates at a wide range of pressures compared to conventional air purge valves, from low to high pressures.
  · In the event of damage to the float valve body or valve seat surface after prolonged use, parts can be replaced from outside, simplifying maintenance and inspections.
  · TA-5 5F includes a main body made of bronze so production of rusty water is not a concern.
  · Negative pressure in the piping or tank automatically produces rapid suction of air, protecting against damage to piping due to vacuum.

  CAD ：

  2D

  Standard Price:	3,089,596 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Steam), GD-30S Series

  YOSHITAKE

  Optimal for applications such as food processing machinery and medical equipment, due to wetted parts made of stainless steel.

  CAD ：

  2D

  Standard Price:	15,363,667 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve (for Hot and Cold Water, Air and Gas), GD-8N Series

  YOSHITAKE

  All metal that comes into contact with liquid is stainless steel, providing superior corrosion resistance and durability.
  
  [Features]
  · All metal that comes into contact with liquid is stainless steel (SUS316), providing superior corrosion resistance and durability.
  · Parts are decreased and cleaned without using any kind of oil.
  · A pressure gauge for secondary side pressure detection can be installed.

  CAD ：

  2D

  Standard Price:	23,561,492 IDR
  Days to Ship:	22 Day(s) or more

• 

  Pressure Reducing Valves for Hot and Cold Water, GD-28-NE Series

  YOSHITAKE

  Corrosion-resistant materials are used in the liquid-contacting parts. Superior chlorine resistance against running cold and hot water. The top section can be disassembled unidirectionally, allowing for internal inspection.

  CAD ：

  2D

  Standard Price:	7,410,000 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valves (Hot and Cold water), GD-41 Series

  YOSHITAKE

  Saves space and resources. Stainless steel is used for fluid-contacting parts, fluoropolymer for fluid-contacting surfaces, and special fluorine rubber for rubber parts to provide superior corrosion resistance and durability.

  Standard Price:	12,409,167 IDR
  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve for Door-to-Door Water Supply for Condominiums, for Use in Residential Complexes, GD-15 / GD-15C Series

  YOSHITAKE

  This product enables a quiet water supply, so it can be used as a pressure reducing valve for individual water supply in apartment buildings, etc. Can hold a very stable secondary side pressure on the water supply side pressure fluctuation. Small and light with a built in strainer.
  
  [Features]
  • Because the noise of the pressure reduction valve itself has been eliminated, water can be supplied even late at night without issue.
  • Because the supplied water pressure has already been adjusted to a standard set pressure, there is no need for on-site pressure adjustment.
  • The pressure-balancing valve structure ensures that the pressure on the secondary side is kept constant without being affected by the pressure on primary side.
  • Thanks to a built-in strainer, any intermixed trash, sand, etc. is removed, preventing it from getting stuck in the valve area or flowing out to the secondary side.
  • The strainer cap can be removed without using tools. Also, because the strainer and the strainer cap are combined into a single unit, it is easy to perform maintenance inspections inside the valve box without leaving the strainer in.
  • Thanks to its tightly closed structure, no fluids will escape to the exterior even if the diaphragm is damaged.
  • Piping can be mounted in whatever direction you like (horizontally or vertically).

  Standard Price:	1,204,763 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Air Vent TV-2 Series for Vapor

  YOSHITAKE

  [Features]
  ▪ It prevents air from entering the Weber system. Under any type of pressure from light vacuum state to maximum operating pressure, the air is evacuated automatically under a slightly lower temperature than saturated vapor temperature.
  ▪ Due to the adoption of a hemispherical stainless steel valve, it is protected by using a seal with high protective properties.
  ▪ Due to its compact shape and light weight, it is easy to install.
  ▪ It has been proven to work reliably under a temperature that is slightly lower than the saturated vapor temperature of the operating pressure range.

  Standard Price:	3,793,667 IDR
  Days to Ship:	12 Day(s) or more

• 

  Pressure Reducing Valve for Water Supply, GD-55-80 Series

  YOSHITAKE

  Used for supplying water to a hot-water heat exchanger while maintaining a predetermined water supply pressure. Besides the pressure reducing function, the valve includes a backflow prevention function, a negative-pressure operation function, a pressure balancing function, and a strainer.

  CAD ：

  2D

  Standard Price:	1,147,506 IDR
  Days to Ship:	14 Day(s) or more

• 

  Pressure Reducing Valve for Water Supply, GD-56-80 Series

  YOSHITAKE

  It's used for the purpose of water supply of hot water for the heat exchanger, and then used maintaining a predetermined water supply pressure. In addition to the pressure reducing function, a backflow prevention function, a negative-pressure operation function, a pressure balancing function, and a strainer are built in.

  CAD ：

  2D

  Standard Price:	955,079 IDR
  Days to Ship:	8 Day(s) or more

• 

  Pressure Reducing Valve for Water Supply, GD-56R-80 Series

  YOSHITAKE

  Built-in backflow prevention function, negative pressure operation function, pressure balance function, automatic return water drain stopper and strainer; used mainly in hot water heat exchangers.
  
  [Features]
  · The pressure-balancing valve mechanism ensures that the pressure on the secondary side is kept constant without being affected by pressure on primary side.
  · Maintenance and inspection are easy as the strainer, check valve, and strainer cap can be removed without using tools.
  · The piping installation direction (vertical horizontal) is unrestricted.
  · Since the drainage plug is a push operated type, it automatically returns to its original position without having to be returned manually.
  · The GD-91R type pressure reduction valve uses parallel threads for connection, and thus piping can be performed easily using cap nuts.
  · Valve body and the diaphragm have excellent resistance to chlorinated water.

  CAD ：

  2D

  Standard Price:	1,489,167 IDR
  Days to Ship:	11 Day(s) or more

• 

  Lift Type Safety Valve AL-24/AL-24F Series

  YOSHITAKE

  [Features]
  ・ It uses a bronze valve box with a stainless steel valve seat so there is no risk of rust
  ・ Since it is a diaphragm type and has no sliding parts, it operates reliably
  ・ The set pressure range is as wide as 0.1 to 0.7 MPa with 1 spring, the adjusting thread is a handle type, and a butterfly nut is used for the lock nut, so the pressure can be easily changed
  ・ Smooth opening and closing even in continuous operation, it operates accurately with respect to the set pressure and discharges liquid
  ・ Stable operation can be obtained from small flow rate to large flow rate
  ・ According to the specifications, you can choose the material of the diaphragm and valve body from 2 types, NBR and FKM (fluoroelastomer)
  ・ It can be installed vertically, horizontally, top, or bottom

  Standard Price:	3,226,333 IDR-
  Days to Ship:	12 Day(s) or more

• 

  RP-7, Pressure-Reducing Valve (for Steam) Benten

  VENN

  For steam cleaning of food equipment, disinfection equipment, cleaning equipment, etc.
  
  [Features]
  · Compact pilot-operated pressure-reducing valve used in equipment and devices with a relatively low flow rate.
  · Compact and lightweight (up to 50%, compared to other in-house products); device integration is supported.
  · Adoption of a piston guide structure and special seal ring makes control stable from lower flow rates to the maximum rated flow rate.
  · Manual handle control with auto locking mechanism makes pressure adjustment easy.
  · Compact design.

  Standard Price:	9,954,500 IDR-
  Days to Ship:	12 Day(s) or more

• 

  RD-40, 41 Type Pressure-Reducing Valve (for Steam) Mini-Benten

  VENN

  For use in food machinery, medical equipment, laundry equipment, and other steam-based machinery
  
  [Features]
  - A direct-acting, pressure-reducing valve that is ideal for precise control of steam pressure for various equipment.
  - Compact and lightweight; optimum for integration into devices.
  - Optimal for items that need to be free of rust, such as food, kitchen equipment, medical equipment, laundry machines, and air conditioners (humidifiers).
  - Stainless steel body suitable for higher-grade vapor lines.
  - Provides large flow rates (heat) required when starting up equipment.
  - Main body is made of bronze or stainless steel; main parts are made of stainless steel for clean vapor.
  - Secondary side pressure can be smoothly adjusted with the manual handle on the automatic lock mechanism.
  - Uses SUS316L bellows and a built-in strainer for high reliability.

  Standard Price:	5,613,667 IDR-
  Days to Ship:	8 Day(s) or more

• 

  RD-30 Type Pressure-Reducing Valve (for Vapor)

  VENN

  Direct acting type general-purpose products (small and medium capacity) such as construction equipment, factory equipment, etc.
  
  [Features]
  ▪ Performs stable operation from the small flow rates that cannot be controlled by pilot-operated products.
  ▪ Structure is little affected by dirt particles, and maintenance is easy.
  ▪ With use of special synthetic rubber diaphragms in multi-purpose direct-acting pressure reducing valve for pipeline and various steam equipment, it can support a wide range of applications.

  Standard Price:	7,227,333 IDR-
  Days to Ship:	12 Day(s) or more

• 

  RD-31N, 32N Type Pressure Reducing Valve, Heisei

  VENN

  Direct-acting general-purpose products (made of bronze, medium capacity) for use in construction equipment, factory equipment, etc.
  
  [Features]
  - Serves as a bronze water-pressure reducing valve meeting rust-water prevention needs.
  - We combine our pressure-reduction technology with high controllability, reliability and user-friendliness, eliminating rust generation from pipe joints and across the flow path.
  - Heisei provides reliable countermeasures for rusty water, used in building facilities, house facilities, plant facilities, boiler water supply, etc.
  - Measures to prevent rusty water in normal state: Bronze body + pipe-end core to prevent rusty water.
  - Low-noise design.
  - Water does not leak outside if the diaphragm is damaged.
  - Built-in strainer.
  - (Nominal diameter of 50 or less 40 mesh equivalent) Smaller approximately 50% later than FC-made conventional parts.

  Standard Price:	6,631,165 IDR-
  Days to Ship:	12 Day(s) or more

• 

  RD-43N, Pressure Reducing Valve for Door-to-Door (for Water / Hot Water), Benkei

  VENN

  A pressure-reducing valve for use in small-capacity, door-to-door water and hot water supply pipes installed inside studio apartments, etc.
  · For larger capacity and general complex housing, use types RD-44N, 47N, etc.
  
  [Features]
  · Utilizes chlorine water-resistant EPDM.
  · Sanitary design that prevents pooling of liquids.
  · Reliable construction from low-to-high differential pressure.
  · These are non-disassembly type pressure-reducing valves for safe and secure construction.
  · Post-construction hydraulic testing can be performed with the reducing valve installed.
  · Utilizes a new, simple test gag method.

  Days to Ship:	8 Day(s) or more

• 

  FD-6N, Fixed Flow Rate Valve (for Individual Resident Water Supply/Hot Water Supply), Benkei

  VENN

  In addition to mainly being used in central hot water supply systems for housing complexes, high-rises, and the like, this fixed flow rate valve is also used in water supplying systems. This adjustable valve automatically restricts flow rates so that flow rate is fixed in response to fluctuations in primary side pressure.
  
  [Features]
  • By using this fixed flow rate valve, it becomes possible to appropriately distribute supplied water and hot water volumes to each residence.
  • As a result, system design and construction work are simplified, energy and water are saved, and water hammer is reduced.
  • Mounting position can be changed to any orientation.
  • Wide working differential pressure range.
  • The simple structure takes advantage of rubber elasticity to maintain a stable flow rate.

  Standard Price:	802,492 IDR-
  Days to Ship:	11 Day(s) or more

Loading...