Check Valves（Applicable Fluid：Water Page2）

• 

  125H Type, Lead-Free Bronze Screw-in Type Swing Check Valve

  TOYO VALVE

  Lead-free copper alloy to ensure the provision of safe water. Lead free copper alloy valves for cold and hot water supply.

  CAD ：

  2D

  Standard Price:	627,116 IDR
  Days to Ship:	16 Day(s) or more

• 

  125H Model Bronze Screw-in Type Swing Check Valve

  TOYO VALVE

  A valve that is safe for use in corrosive environments.

  CAD ：

  2D

  Standard Price:	364,472 IDR-
  Days to Ship:	8 Day(s) or more

• 

  16K Type Ductile Cast-Iron Screw Down Lift Check Valve

  TOYO VALVE

  A tough valve resistant to heat, corrosion abrasion resistance. Use in areas with vapor, hot water, and embedded lines where safety is a priority.

  CAD ：

  2D

  Standard Price:	848,060 IDR-
  Days to Ship:	13 Day(s) or more

• 

  J10K Lead Free Bronze Screw Down Swing Check Valve (Metal Sheet) (JIS B 2011) <>

  TOYO VALVE

  Lead-free copper alloy to provide safe water. Used for water and hot-water supply.

  CAD ：

  2D

  Standard Price:	495,277 IDR-
  Days to Ship:	9 Day(s) or more

• 

  J10K Type Lead Free Bronze Swing Check Valve (JV5)

  TOYO VALVE

  MUEN-KUN® — Enables the provision of safe (lead-free) water. The pipe end core mechanism prevents corrosion of the pipe ends and threads of lining steel pipes.
  
  [Features]
  · Robust and easy-to-use handle: The handle is made from a copper alloy that is compatible with underground environments. It has excellent resistance to corrosion. Suitably designed for fork handle operation.
  · Additional tightening not required. Complete leakage prevention mechanism: Two types of shaft sealing O-rings are further protected by dustproof felt. With no sand/dust intrusion inside the valve, the life of the O-rings is improved dramatically. Please use this check valve with full confidence even in lines with severely high opening-closing frequency. In addition, the packing nut is secured by metal contact. Therefore, there is no loosening of the tip (fork) of the T handle when opening and closing.
  · A secure design compliant with JIS standards: The stem rising type is a JIS-standard product (however, the shaft seals are O-ring type). However, the stem non-rising type is a JIS-compliant product. The stem rising type uses the solid JIS standard body. Furthermore, this is a round body type with minimal deformation. A disc guide is also provided in accordance with JIS standards. As a result, chattering vibration does not cause damage to the surface of the valve seat.
  · Easy-to-replace packing: Do you replace the packing in the event of a leakage? The valve is a ‘convenient cartridge type’ that is designed for such contingencies. All the packing is built into the glands. Therefore, simply remove gland to replace the O-ring. Subsequent maintenance and management is simplified.
  Dezincification resistant valve: Dezincification-resistant lead-free bronze (C6803) is used in the stem material. Long service life.

  CAD ：

  2D

  Standard Price:	632,063 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Class 10 K - Screw-in Type Swing Check Valve

  TOYO VALVE

  ·Stainless steel valve U series. ·It can be used for general purpose and construction equipment.

  CAD ：

  2D

  Standard Price:	1,103,333 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Class 10K - Flange Type Swing Check Valve

  TOYO VALVE

  ·Stainless steel valve U series. ·It can be used for general purpose and construction equipment.

  CAD ：

  2D

  Standard Price:	3,738,500 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Check Valve, Check Valve for Door-to-Door Water Supply, CV-25U Series

  YOSHITAKE

  Suitable for use in door-to-door water supply in residential complexes and like. Can prevent backflow of contaminated water from water faucets, equipment, and the like when negative pressure occurs inside water mains due to water supply cut off, etc. Spring action design enables pipe mounting in any direction (horizontal or vertical).

  Standard Price:	862,667 IDR-
  Days to Ship:	12 Day(s) or more

• 

  CS-1USN Type Check Valve (for Cold/Hot Water)

  VENN

  Spring-type for apartment buildings, houses, building facilities, etc. (Low pressure loss, water hammer prevention type)
  
  [Features]
  · Spring style shuts valves for back-flow prevention during back pressure or water shutoff, for water hammering prevention type with excellent safety.
  · The valve body is a synthetic rubber disk.
  · Usable with warm water up to 90°C.
  · Water can be supplied at a low pressure loss.
  · Pipe end cores are used for connectors, as they are made of material that won't rust, thus preventing rust-colored water.
  · Valve body is structured as a cartridge for easy maintenance.
  ・Noise during water flow is 40 dB or less (during rated flow), for low noise of around the same degree as piping.
  · For various supply water systems, prevents backflow caused by back pressure when pressure of the water supply source decreases due to water supply shutoff, etc., and for maintaining a reliable and safe water supply.

  Standard Price:	727,333 IDR
  Days to Ship:	12 Day(s) or more

• 

  CS-2USN Type Check Valve (for Cold/Hot Water)

  VENN

  Spring-type for apartment buildings, houses, building facilities, etc. (Low pressure loss, water hammer prevention type)
  
  [Features]
  · Spring style shuts valves for back-flow prevention during back pressure or water shutoff, for water hammering prevention type with excellent safety.
  · The valve body is a synthetic rubber disk.
  · Usable with warm water up to 90°C.
  · Water can be supplied at a low pressure loss.
  · Pipe end cores are used for connectors, as they are made of material that won't rust, thus preventing rust-colored water.
  · Valve body is structured as a cartridge for easy maintenance.
  ・Noise during water flow is 40 dB or less (during rated flow), for low noise of around the same degree as piping.
  · For various supply water systems, prevents backflow caused by back pressure when pressure of the water supply source decreases due to water supply shutoff, etc., and for maintaining a reliable and safe water supply.

  Standard Price:	1,022,667 IDR
  Days to Ship:	12 Day(s) or more

• 

  CS-3SSN, Check Valve (for Cold Water / Hot Water)

  VENN

  Spring-type for apartment buildings, houses, building facilities, etc. (low pressure loss, prevents water hammer)
  
  [Features]
  · For various water supply systems; prevents backflow using back pressure when the pressure of the supply water source decreases due to water supply cutoff, and for maintenance of a reliable and safe water supply.
  · Spring style with a closing valve for back-flow prevention during a water outage; prevents water hammering, delivering excellent safety.
  · Valve body includes a synthetic rubber disk.
  · Usable with warm water up to 90°C.
  · Water can be supplied with low pressure loss.
  · Pipe end cores are used for connectors, as they are made of material that will not rust, thus preventing rust-colored water.
  · The valve body employs a cartridge structure for easy maintenance.
  · Noise is kept to 40 dB or below (at rated flow rate) while water is flowing, roughly the same level of noise produced by standard pipes.

  Standard Price:	522,667 IDR
  Days to Ship:	12 Day(s) or more

• 

  CS-4N Type Check Valve with Expansion/Contraction Pipe (for Cold/Hot Water)

  VENN

  Spring-type for apartment buildings, houses, building facilities, etc. (Low pressure loss, water hammer prevention type)
  
  [Features]
  · For various supply water systems, prevents backflow caused by back pressure when pressure of the water supply source decreases due to water supply shutoff, etc., and for maintaining a reliable and safe water supply.
  · Spring style shuts valves for back-flow prevention during back pressure or water shutoff, for water hammering prevention type with excellent safety.
  · The valve body is a synthetic rubber disk.
  · Usable with warm water up to 90°C.
  · Water can be supplied at a low pressure loss.
  · Pipe end cores are used for connectors, as they are made of material that won't rust, thus preventing rust-colored water.
  · Valve body is structured as a cartridge for easy maintenance.
  Noise during water flow is 40 dB or less (during rated flow), for low noise of around the same degree as piping.

  Standard Price:	909,167 IDR
  Days to Ship:	12 Day(s) or more

• 

  CS-7N Type Check Valve (for Cold/Hot Water)

  VENN

  Ensures a safe and reliable supply of water for various types of water supply systems by preventing backflow (due to backpressure resulting from pressure drops when the supply is cut off). Compliant with the Japan Water Works Association 'JWWA-B-129 Backflow Preventer Valve' standard. A check valve is installed on the inlet end of the mixing valve to ensure the safety of water supply and hot water systems.
  
  [Features]
  ·Allows for easy maintenance, without having to remove the check valve from the pipe.
  • The provision of an inspection hole allows for easy function checks.
  ·Reduces pressure drops.
  • Usable with warm water up to 90°C.
  • Pipe end cores are used for connectors, as they are made of material that won't rust, thus preventing rust-colored water.

  Standard Price:	2,806,987 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Straight SMC Type JIS10K　

  ISHIZAKI CO

  [Features]
  · Nylon-coated product suitable for water lines used for washing facilities and high-floor construction, etc.
  · JWWA Certified and Registered product.
  · SCS13 material, which is durable, is used for valve rods, valve bodies, upper and lower guides, and valve seats for 10K 40A to 150A.

  Standard Price:	7,988,560 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Straight Type SM Type JIS10K　

  ISHIZAKI CO

  [Features]
  · Standard model that can be manufactured with ductile or bronze in addition to cast iron.
  · Lineup includes a wide range from 10K to 63K.
  · SCS13 material, which is durable, is used for valve rods, valve bodies, upper and lower guides and valve seats for 10K 40A to 150A.

  Standard Price:	3,220,732 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Threaded SMG Type 10K Core Built-in Goods

  ISHIZAKI CO

  [Features]
  · Threaded type for small bore piping.
  · 15A to 32A10K/20K are available.
  · Also suitable for heavy water and steam when the materials for the main body and sheet gasket are changed.

  Standard Price:	1,082,601 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Threaded SMG Type 10 K Screw-in

  ISHIZAKI CO

  [Features]
  · Threaded type for small bore piping.
  · 15A to 32A10K/20K are available.
  · Also suitable for heavy water and steam when the materials for the main body and sheet gasket are changed.

  Standard Price:	1,915,257 IDR
  Days to Ship:	16 Day(s) or more

• 

  Straight Type SMF Model JIS10K Model

  ISHIZAKI CO

  [Features]
  • Nylon coated product suitable for feed-water lines such as water purification plants and high-rise buildings, etc.
  · JWWA Certification Registered product.
  • Uses highly durable SCS13 material for valve stems up to 10K40A150A, valve bodies, upper and lower guides and toilet seats.

  Standard Price:	2,170,676 IDR-
  Days to Ship:	17 Day(s) or more

• 

  Check Valve (Inline Check) [for water, Hot water] CV5R Type

  MIYAWAKI

  [Features]
  ・ Inline type for compact piping
  ・ The mounting position can be freely set vertically, horizontally or diagonally
  [Applications]
  ・ Ideal for preventing backflow of hot water piping up to 80°C

  Standard Price:	1,813,333 IDR
  Days to Ship:	22 Day(s) or more

• 

  Check Valve (Inline Chuck) [for Steam, Hot Water and Cold Water] CVC3 Type

  MIYAWAKI

  [Features]
  ・ It prevents water hammer regardless of whether the heating coil is capped or hairpin type
  ・ Excellent sealing performance at low pressure due to counter weight
  ・ The squeezing mechanism inside the main body prevents water droplets from leaking to the outside
  ・ Excellent durability due to all stainless steel
  ・ It prevents foreign object from entering with a strainer standard equipment
  ・ Inline type for compact piping
  ・ The mounting position can be freely set vertically, horizontally or diagonally
  [Applications]
  ・ Ideal for preventing backflow of steam/water (hot water) piping

  Standard Price:	1,304,012 IDR-
  Days to Ship:	8 Day(s) or more

• 

  A-Check Socket Type

  ASOH

  This is a check valve with a double internal screw type body.
  [Features]
  ·Piping space can be saved.
  ·Due to the simple poppet structure, there is no leakage against non-return pressure.

  Standard Price:	269,963 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Swing check valve, bronze

  ESCO

  ESCO check valve and swing check valve for fluids.

  Standard Price:	710,684 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Swing check valve, stainless steel

  ESCO

  【Product Specifications】
  ・Material-SCS13A (body)
  ・Max. pressure-Still water (120℃ or less)： 1.4MPa, Steam, air, gas, oil (180℃ or less)： 1.0MPa
  ・Nominal (Thread： PT)…20(3/4)

  Standard Price:	1,730,439 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Lift Check Valve

  ESCO

  [Features]ESCO stainless steel lift check valve for fluids.

  Standard Price:	1,376,283 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Lift Check Valve (Made of ductile cast iron)

  ESCO

  【Product Specifications】
  ・Material-Body： ductile cast iron (FCD-S)
  ・Max. pressure-Air, gas, oil, steam, pulsating water (220℃ or less)： 0.98MPa (10kgf/cm2), Still water (120℃ or less)： 1.37MPa (14kgf/cm2)
  ・Thread (PT)…1.1/2

  Standard Price:	609,554 IDR-
  Days to Ship:	8 Day(s) or more

• 

  A-Check Check Valve Socket Type (Brass)

  ASOH

  Standard Price:	535,077 IDR-
  Days to Ship:	12 Day(s)

• 

  A-Check Check Valve Socket Type (Stainless)

  ASOH

  Standard Price:	1,332,770 IDR-
  Days to Ship:	12 Day(s)

• 

  A-Check Check Valve Nipple Type (Brass)

  ASOH

  Standard Price:	622,616 IDR-
  Days to Ship:	12 Day(s)

• 

  A-Check Check Valve Nipple Type (Stainless)

  ASOH

  Standard Price:	1,201,693 IDR-
  Days to Ship:	12 Day(s)

Loading...