Ball Valves（Supply Side, Plumbing Thread Nominal：3/4B）

• 

  Ball Valves/Stainless Steel/PT Male/PT Female

  MISUMI

  [Features]This ball valve has a compact main body size and takes up little space for installation.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	340,404 IDR-
  Days to Ship:	Same day or more

• 

  Stainless Steel General-Purpose Type 600 Screw-in Ball Valve

  KITZ

  KITZ, Ball Valve, Stainless Steel, for General Purpose, 600 Type Screw-in Ball Valve

  CAD ：

  2D

  Standard Price:	471,768 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Brass General-Purpose Type 400 Ball Valve (Three-Way) Screw-in

  KITZ

  [Features]
  ・ Secure sealing of pipe connection
  ・ Hygienic with zero fluid contamination
  ・ High durability against freezing and impact
  ・ Excellent workability and efficient piping is possible

  CAD ：

  2D

  Standard Price:	515,141 IDR
  Days to Ship:	8 Day(s) or more

• 

  Bronze Ball Valve With 10K Electric Actuator

  KITZ

  ED type (12 V DC / 24 V DC) ON-OFF control, direct current power supply, 90° forward/reverse rotation.
  [Features]
  ・ The manufacturer has developed a high-performance, yet compact motor that has achieved fast opening and closing speed and compactness.
  ・ Cost effective because the power consumption is small and the power is turned off after the operation
  ・ Consists of minimal parts, extremely few failures, and excellent durability
  ・ In the event of a power failure, you can also open and close manually
  ・ Eliminates the problems of general solenoid valves, such as the occurrence of water hammer and malfunctions due to foreign objects being caught
  ・ The power supply is AC100/200 V, DC12/24 V, with a built-in relay, with a terminal box, and a 180-degree rotation type series is standardized to meet the needs of various customers.
  ・ In order to prevent the motor coil from burning, the overload protection device is used.
  ・ Can also be used in outdoor piping lines

  CAD ：

  2D

  Standard Price:	2,257,064 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Brass General-Purpose Type 400 Ball Valve Screw-in (Lever)

  KITZ

  KITZ, Ball Valve Brass, for General Purpose, 400 Type Screw-in Ball Valve (Lever)

  CAD ：

  2D

  Standard Price:	293,935 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Brass General-Purpose Type 600 Ball Valve Screw-in (Lever)

  KITZ

  [Features]
  ・ Secure sealing of pipe connection
  ・ Hygienic with zero fluid contamination
  ・ High durability against freezing and impact
  ・ Excellent workability and efficient piping is possible

  • STOCK

  CAD ：

  2D

  Standard Price:	238,667 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel 10K Ball Valve With Small Electric Actuator

  KITZ

  EA type (100 V AC) ON-OFF control, 90° forward/reverse rotation.
  [Features]
  ・ The manufacturer has developed a high-performance, yet compact motor that has achieved fast opening and closing speed and compactness.
  ・ Cost effective because the power consumption is small and the power is turned off after the operation
  ・ Consists of minimal parts, extremely few failures, and excellent durability
  ・ In the event of a power failure, you can also open and close manually
  ・ Eliminates the problems of general solenoid valves, such as the occurrence of water hammer and malfunctions due to foreign objects being caught
  ・ The power supply is AC100/200 V, DC12/24 V, with a built-in relay, with a terminal box, and a 180-degree rotation type series is standardized to meet the needs of various customers.
  ・ In order to prevent the motor coil from burning, the overload protection device is used.
  ・ Can also be used in outdoor piping lines

  CAD ：

  2D

  Standard Price:	2,669,667 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Ball Valve With 10K Electric Actuator, Cast Iron

  KITZ

  • Cast Iron Ball Valve with Electric Actuator
  • Kitz product code: EXH100-10FCT, EXH100-10FCTB, EXH200-10FCT and EXH200-10FCTB.
  • Main body ball valves shape: straight.
  • Ball Valve are Full bore type.
  • The Body and Body cap material: Ductile Cast Iron FCD-S.
  • Ball material: Stainless steel SCS13A, SUS304, SUS304TP.
  • Ball Seal material: PTFE.
  • Stem material: Stainless steel SUS403.
  • Supply & Control side connection: JIS B2239 (10K) and JIS B0203 standards.
  • Applicable Fluid : Water and Oil.
  • Electric Actuator Applicable Voltage: AC100V and for AC200V.
  • Normal Operating Pressure: 10K.
  

  CAD ：

  2D

  Standard Price:	9,831,074 IDR
  Days to Ship:	68 Day(s) or more

• 

  600 Type Brass Screw-in Type Ball Valve (Lever Handle / Butterfly Handle) 600RC-N

  TOYO VALVE

  [Features]
  · A ball valve that can be opened and closed by rapidly turning the lever handle 90° and has many features.
  · For example (1) Not trending towards fluid sealing mechanism prevents piping mistake. (2) Sealing performance can be maintained for long time (3) Saves piping space. (4) Low operating torque. (5) Very low pressure loss compared to other valve types. (6) No maintenance fee required.
  · Because of its structure, the ball valve is not suitable for throttling (can be used for throttling in piping for gases).
  · In this case, use the globe valve as much as possible.

  CAD ：

  2D

  Standard Price:	306,500 IDR
  Days to Ship:	8 Day(s) or more

• 

  Ball Valves/Stainless Steel/High Flow Rate/PT Female/PT Female

  MISUMI

  [Main Body Shape]Straight "Main body material" You can choose C3771BE or SCS14A.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	648,298 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel General-Purpose 10K Screw-in Ball Valve

  KITZ

  • 10UT and 10UTM series Stainless Steel General-Purpose Screw-in Ball Valve
  • Kitz product code: 10UT and 10UTM.
  • Main body ball valves shape: straight.
  • Main Body Material: Stainless Steel SCS13A, SCS14A.
  • 10UT and 10UTM Stem material: Stainless steel SUS306, SUS304.
  • Ball material: Stainless steel SUS316, SUS304, SCS14A, SC13A.
  • Ball seal material: PTFE.
  • Handle material: Ductile iron FCD400-15.
  • 10UT and 10UTM Ball Valve: Standard bore type
  • Supply and control side RC connections: BS21 (JIS B0203) standards.
  • Applicable Fluid : Water.
  • Normal Operating Pressure: 10K.
  

  CAD ：

  2D

  Standard Price:	1,757,499 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cast Iron General-Purpose, Screw-in 10K Ball Valve

  KITZ

  [Brand]KITZ (KITZ)
  [Material]
  Main Body: FC200
  Ball: SCS13A/SUS304/SUS304TP
  Ball Seat: PTFE
  Packing: PTFE
  [Structure]
  Full Bore
  
  Cast Iron Ball Valve.

  CAD ：

  2D

  Standard Price:	1,144,658 IDR
  Days to Ship:	8 Day(s) or more

• 

  Brass Common-Use 150 Type Ball Valve Threaded

  KITZ

  [Main Body Shape]Straight, [Main Body Materials] Brass, [Fluids Used] Water/oil/gas

  CAD ：

  2D

  Standard Price:	447,451 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Brass General-Purpose Type 400 Ball Valve, Male Thread × Female Thread

  KITZ

  A brass, threaded, general-purpose 400 type ball valve—manufactured by Kitz Corporation, with a track record in Japan for top-class quality screw fittings/pipe components.
  · Material: brass
  · Shape: straight
  · Working fluid: water, oil, gas

  CAD ：

  2D

  Standard Price:	511,871 IDR
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel Ball Valve RSS Series (Three-Way Valve)

  HAMAI

  [Features]
  · Tough body that does not develop cavities during the stainless steel hot forging process.
  · Two-faced sheet type with reduced sealing unevenness in the direction of the flow and usable from any port.
  · Base is provided, so conversion to automatic valve is easy.
  · O-ring made of Viton, so it has a wide range of applications for various kinds of equipment handling corrosive fluids.

  CAD ：

  2D

  Standard Price:	4,041,748 IDR
  Days to Ship:	8 Day(s) or more

• 

  F Type (Standard Bore), Ball Valve, Regular Ball, Lever Handle

  ONDASEISAKUSYO

  • F Type Regular Ball Valve 400psi
  • ONDA MFG product code: F
  • F ball valve is standard bore type.
  • Main body ball valves shape: straight.
  • Body material: Brass B3771BE.
  • Cap and Ball material: Brass B3604BE for ball chrome plating.
  • O-Ring material is Fluoroelastomer Rubber FKM.
  • Ball seal material: PTFE.
  • Handle material: SUS (With handle cover PP).
  • Handle Shape: Lever
  handle type.
  • Applicable Fluid: Hot and cold Water, Oil, Air.
  • Operating pressure: 2.8MPa for (-15 to 70°C) / 0.5MPa for (150°C or less)
  

  CAD ：

  2D

  Standard Price:	325,868 IDR
  Days to Ship:	13 Day(s) or more

• 

  Brass General-Purpose Type 600 Screw-in Ball Valve (Butterfly Shaped Handle)

  KITZ

  [Features]
  ・ Secure sealing of pipe connection
  ・ Hygienic with zero fluid contamination
  ・ High durability against freezing and impact
  ・ Excellent workability and efficient piping is possible

  CAD ：

  2D

  Standard Price:	250,003 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel General-Purpose Type 1000 Screw-in Ball Valve

  KITZ

  KITZ, Ball Valve, Stainless Steel, for General Purpose, 1000 Type Screw-in Ball Valve

  CAD ：

  2D

  Standard Price:	1,131,780 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Bronze General-Purpose 10K Ball Valve Flange

  KITZ

  • TB and TL
  series Ball valve full bore type - Flanged Ends.
  • Kitz product code: TB and TL
  • Main body ball valves shape: straight.
  • The Body and body cap are Cast bronze.
  • TB/TL ball material is forged brass C3771.
  • Stem material: Special brass C3531.
  • Ball seal material: polymer PTFE.
  • Handle Shape: Lever type.
  • End connection: JIS B2240 standards.
  • Applicable Fluid : Water, Oil and Gas.
  • flanged connection size: 15A, 20A, 25A, 32A, 40A, 50A, 65A, 80A and 100A.
  • Normal Operating Pressure: 10K
  

  Standard Price:	595,633 IDR
  Days to Ship:	9 Day(s) or more

• 

  Brass General-Purpose Type 400 Screw-in Ball Valve (Vertical, Three-Way)

  KITZ

  • TV2L Series Three-Way Brass Ball Valve/Screw-in type.
  • Kitz product code: TV2L.
  • Main body ball valves shape: Upright three Way.
  • TV2L ball valve type: Standard bore.
  • The Body and Body cap material: Brass C3771BE.
  • Ball Seal material is PTFE containing Glass Fiber.
  • Stem material: Special brass C3531.
  • O-Ring material is FPM (Viton E-60)• Handle material: Stainless steel SUS403.
  • Handle Shape: Lever
  type.
  • Screw threaded-in ends connection: JIS B0203 standards.
  • Applicable Fluid : Water, Oil and Gas.
  • Normal Operating Pressure: 400 type.
  

  CAD ：

  2D

  Standard Price:	1,578,333 IDR
  Days to Ship:	16 Day(s) or more

• 

  Ace Ball Zero (Brass) BL External Screw / Drain Type

  ASOH

  A wealth of variations, including labor-saving connections, super-reduced fluid resistance, and excellent functional beauty. For all kinds of oil and air pressure equipment and piping for facilities related to water and water supply.

  CAD ：

  2D

  Standard Price:	454,157 IDR
  Days to Ship:	8 Day(s) or more

• 

  Ball Valves, Full-Bore, Oversized Ball Type, Green Lever Handle, FF Type

  ONDASEISAKUSYO

  Full-bore designed to the same nominal diameter as the pipe. Optimal for use in large flow-rate pipelines.

  CAD ：

  2D

  Standard Price:	241,154 IDR
  Days to Ship:	12 Day(s)

• 

  Stainless Steel 3.92 MPa MINI BALL VALVES

  FUJIKIN

  Easy to mount and operate in a small space due to simple structure and easy open/close operation.

  Standard Price:	791,072 IDR
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel 3.92 MPa Butterfly Handle Type, Reduced Bore Type, Ball Valve

  FUJIKIN

  [Features]
  ・ Lightweight and compact, saves piping space
  ・ It can be fully opened and closed by opening and closing at 90°, and is suitable as an ON-OFF valve
  ・ The valve body has a stainless steel precision casting finish
  ・ There is a butterfly handle type that has a small handle space and is easy to install and operate even in tight spaces

  Standard Price:	392,848 IDR
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel CSE Screw-in Ball Valve

  CONSUSS

  [Brand]consus
  [Material]
  Main Body: SUS304
  [Structure]
  Reduced Port
  
  Stainless steel 304 reduce port type ball valve.
  [Features]
  ·One-piece body, reduce port structure
  ·Seat material: PTFE
  ·Made of stainless steel 304, it has excellent cost performance and can be used for a wide range of purposes.
  ·Butterfly handle (T handle) is available as an option
  ·The seat is made of reinforced fluorine resin, so it can be used with high-temperature fluids.
  [Applications]
  ·Can be used for various stainless steel pipes

  Standard Price:	378,952 IDR
  Days to Ship:	13 Day(s) or more

• 

  Stainless Steel CSF Screw-in Ball Valve

  CONSUSS

  [Brand]consus
  [Material]
  Main Body: SUS316/SUS316L
  [Structure]
  Full Port
  
  Stainless steel 316 or stainless steel 316 L full bore ball valve.
  [Features]
  ·Two-piece body, full-port structure
  ·The seat material is PTFE, and the body material is stainless steel 316 and stainless steel 316L.
  ·Since NEW PTFE is used for the seat part, it can be used with various fluids.
  [Applications]
  ·Suitable for various stainless steel pipes

  Standard Price:	683,234 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel General-Purpose Type 600 Screw-in Ball Valve (Butterfly Handle)

  KITZ

  Kitz, Ball Valve, Stainless Steel General Purpose 600 Type, Screw-in Ball Valve (Butterfly-Shaped Handle)

  CAD ：

  2D

  Standard Price:	382,168 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel Valve - Threaded Ball Valve (Reduced Bore) SRVM

  INOC

  • SRVM Series - Ball Valve Threaded Connection / Reduced Bore Type.
  • Main body ball valves shape: straight.
  • Nominal Pressure Rating: 800 Type• Body Material: SCS14A Stainless Steel Cast
  • Stem Material: SUS316 Stainless Steel Cast
  • Ball Material: SUS316 Stainless Steel Cast
  • Ball seal and gland packing material: polymer PTFE.
  • Lever Handle material: Stainless Steel SUS430.
  • Handle Shape: Lever
  • Applicable Supply Side Plumbing and Control Side Plumbing Thread Nominal diameter 8 sizes are available 8A, 10A, 15A, 20A, 25A, 32A, 40A and 50A.
  

  Standard Price:	471,360 IDR
  Days to Ship:	12 Day(s) or more

• 

  Ductile Cast Iron General Purpose 20K Ball Valve Screw-in

  KITZ

  [Features]
  ・ Ductile iron valves can be used as valves for high-pressure gas equipment

  CAD ：

  2D

  Standard Price:	1,251,000 IDR
  Days to Ship:	18 Day(s) or more

• 

  Bronze General-Purpose Type 400 Ball Valve (Three-Way) Screw-in

  KITZ

  [Brand]KITZ (KITZ)
  [Material]
  Main Body: CAC
  Ball: C3771BE + Cr plated
  ball sheet: PTFE
  O-ring: FKM
  [Structure]
  Standard bore
  
  T-ball series.
  [Features]
  ・ Secure sealing of pipe connection
  ・ Hygienic with zero fluid contamination
  ・ High durability against freezing and impact
  ・ Excellent workability and efficient piping is possible

  CAD ：

  2D

  Standard Price:	958,462 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Brass Ball Valve BSS Series (Lever Handle Type)

  HAMAI

  [Features]
  · A brass forging product that heat-forged brass rods and bars for forging with a sturdy, leak-proof main body.
  · Compact and simple bar stock type construction.
  · The small handle allows easy installation and operation even in narrow spaces containing concentrations of piping.

  CAD ：

  2D

  Standard Price:	293,239 IDR
  Days to Ship:	8 Day(s) or more

• 

  Brass Ball Valve, RBS Series, for Steam

  HAMAI

  The gland portion provides a double packing, while the conical spring prevents thermal deformation and low surface pressure of the sealing, which can withstand long-term use.
  
  [Features]
  · The gland portion provides a double high shaped packing with a sealing effect, while the conical spring prevents thermal deformation and reduced surface pressure of the sealing, which can withstand long-term use.
  · The handle can be removed, the set screw can be loosened, and the gland nut can be retightened.
  · This is a long net type where heat insulating material is easy to coil.

  CAD ：

  2D

  Standard Price:	1,303,380 IDR
  Days to Ship:	21 Day(s) or more

• 

  Stainless Steel Ball Valve BSS Series (Lever Handle Type)

  HAMAI

  Compact bar stock type featuring a simple structure. The body contains no pin-holes or cracks. The body is composed of highly corrosion resistant SUS316.

  CAD ：

  2D

  Standard Price:	549,384 IDR
  Days to Ship:	8 Day(s) or more

• 

  BSS Series Oil-Free SUS316 Ball Valve, Lever Handle (Reduce Bore)

  HAMAI

  Oil-free processed ball valves have undergone degreasing and cleaning, and are manufactured with dust-proofing in mind. These valves are widely used in health care, oxygen production, food product, paints, high-purity gas, semiconductors, and biotech-related industries.

  CAD ：

  2D

  Standard Price:	843,262 IDR
  Days to Ship:	21 Day(s) or more

• 

  Ball Valve, FF (Full-bore), Green T Handle

  ONDASEISAKUSYO

  RoHS compliant. The full bore design matches the nominal diameter of the pipe and is optimal for use in large-flow piping.
  
  [Features]
  · A newly launched compact full bore ball valve with a shorter face‐to‐face, distance.
  · Features improved pressure resistance.
  · Compact design
  · Compared with FF Type (full-bore), face to face distance is shortened, so space-saving piping is possible at a reasonable price.
  · Increased pressure resistance performance.
  · Thick design; the maximum allowable pressure is 4.2 MPa (600 psi).
  · Made in Japan.
  · The main components (main body, ball, cap, etc.) of our brass ball valves, valves, and BS (bronze) ball valves are manufactured in Japan.

  CAD ：

  2D

  Standard Price:	340,814 IDR
  Days to Ship:	11 Day(s) or more

• 

  FF2 Type (Full-Bore) Ball Valve, Compact Full Bore, Green Lever Handle

  ONDASEISAKUSYO

  Compact type with short face-to-face dimension is now available for full-bore ball valves. The pressure resistance is also improved.
  [Features]
  · A compact design. Compared to the FF type (full ball), the face-to-face dimension is shorter, space saving piping is possible, and it is a good value.
  ・ Pressure resistance performance is increased. Maximum allowable working pressure is 4.2 MPa (600 psi) with thick wall design

  CAD ：

  2D

  Standard Price:	241,814 IDR
  Days to Ship:	11 Day(s) or more

• 

  FF2 Type (Full-Bore) Ball Valve, Full-Bore Compact, Green T Handle

  ONDASEISAKUSYO

  The pressure resistance is also improved.
  [Features]
  ・ Compared to the FF type (full ball), the face-to-face dimension is shorter, space saving piping is possible, and it is a good value.
  ・ Maximum allowable working pressure is 4.2 MPa (600 psi) with thick wall design

  CAD ：

  2D

  Standard Price:	243,018 IDR
  Days to Ship:	11 Day(s) or more

• 

  F2 Type (Standard Bore) Ball Valve, Compact Ball, Lever Handle

  ONDASEISAKUSYO

  The flow rate is almost the same as regular balls, and the compact design allows space saving piping.

  CAD ：

  2D

  Standard Price:	238,470 IDR
  Days to Ship:	11 Day(s) or more

• 

  Ball Valve Full-Bore Economy Type (CSZ)

  CONSUSS

  An affordable type of full-bore ball valve that does not regulate the flow rate. Very hygienic, as the entire parti is made of stainless steel.
  
  [Features] - Two-piece body, full-port design.
  - Main body is made of 304 stainless steel, while the sheet is made of PTFE.
  - Available in four sizes: 10A, 15A, 20A, and 25A.
  - Ideal for liquid and gas. Flange fittings are recommended.

  Standard Price:	455,013 IDR
  Days to Ship:	8 Day(s) or more

• 

  800 Model Reduced Bore Ball Valve

  TOUAVALVE

  TOA VALVE INDUSTRY BALL VALVE GENERAL COCK 800 REDUCED BORE BALL VALVE.

  Standard Price:	341,672 IDR
  Days to Ship:	11 Day(s) or more

• 

  Screw-in Brass Ball Valve for General Gas Piping

  KITZ

  • TG Series Brass ball valve, Design for gas service.
  • Kitz product code: TG.
  • Main body ball valves shape: straight.
  • TG ball valve type: Standard bore.
  • The Body and Body cap material: Forged Brass• TG ball material: BRASS Nickel chrome plated.
  • Ball Seal material is Reinforced PTFE.
  • Stem material: Dezincification resistant brass.
  • O-Ring material is NBR (Nitrile Rubber)• Handle Shape: Lever
  type.
  • Screw threaded-in ends connection: JIS B0203 standards.
  • Applicable Fluid : Gas.
  • Normal Operating Pressure: 0.98 MPa at Temperature 40˚C
  

  CAD ：

  2D

  Standard Price:	514,353 IDR
  Days to Ship:	10 Day(s) or more

• 

  Stainless Steel General-Purpose Type 800 Screw-in Ball Valve

  KITZ

  KITZ, Ball Valve, Stainless Steel, for General Purpose, 800 Type Screw-in Ball Valve

  CAD ：

  2D

  Standard Price:	868,123 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Ductile Iron General-Purpose Type 400 Ball Valve Screw-in

  KITZ

  • STZ Series Ductile Iron Ball Valves- Screw in Type.
  • Kitz product code: STZ.
  • Main body ball valves shape: straight.
  • STZ ball valve type: Reduced Bore.
  • The Body and Body cap material: Ductile Iron FCD-S• STZ ball material: FORGED BRASS C3771.
  • Ball Seal material is Reinforced PTFE.
  • Stem material: Special brass C3531.
  • Handle material: Stainless steel SUS430 and plastic covering.
  • Handle Shape: Lever
  type.
  • Screw-in connection: JIS B0203 standards.
  • Applicable Fluid : Water, Oil and Gas.
  • Pressure: W.O.G at room temp 2.75MPA / Saturate steam 0.98 MPA
  

  • STOCK

  CAD ：

  2D

  Standard Price:	996,462 IDR
  Days to Ship:	1 Day(s)

• 

  Cast/Stainless Steel Class-600 Ball Valve Screw Fittings

  KITZ

  A cast steel ball valve. [Main Body Shape]Straight, [Main Body Materials] Cast steel, [Fluids Used] Water

  Standard Price:	837,948 IDR
  Days to Ship:	13 Day(s) or more

• 

  General-Purpose Bronze Type 400 Ball Valve Screw-in

  KITZ

  [Main Body Shape]Straight, [Main Body Materials] CAC406, [Fluids Used] Water/oil/gas

  CAD ：

  2D

  Standard Price:	595,633 IDR-
  Days to Ship:	9 Day(s) or more

Loading...