Screw Fittings, Screw-In Type Flanges（Nominal of Thread 3(Different Diameters or Different Type Screw)：2 1/2B(65A)）

• 

  Pipe Fitting - Female/Male T

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Standard Price:	764,492 IDR
  Days to Ship:	16 Day(s) or more

• 

  ZD Fitting, White, 3-Way Reducing Tees

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	763,314 IDR-
  Days to Ship:	9 Day(s) or more

• 

  PC Core Fittings, for Lined Steel Pipe Connection, Unequal Diameter Tee

  CK KINZOKU

  Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
  Pipe end anti-corrosion joints for inner and outer surface lining steel pipes with excellent anti-corrosion performance by coating the outer surface of the core joint with a thick polyamide resin or the like.
  [Features]
  ·It has excellent anti-corrosion performance.
  ·The socket sleeve is made long and completely wraps around the tube sheath.
  ·The gap between the pipe and joint is sealed with a special rubber ring or caulking tape to prevent water from entering and to provide electrical insulation.
  ·It has excellent corrosion resistance and weather resistance.
  ·There is no need to worry about corrosion even when buried in salty soil, soil or concrete where local batteries are likely to occur, or where there is a lot of stray current.
  ·Increase efficiency of piping construction.
  ·By using rubber rings, there is no need to wrap anti-corrosion tape around the body of the joint and where it connects to the pipe, which speeds up the installation of pipes.
  [Applications]
  ·For branch size conversion of buried lining piping.

  Standard Price:	1,440,167 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Transparent PC Core Fittings (TPC) - for Lining Steel Pipe Connection - Reducing Tee

  CK KINZOKU

  Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
  [Features]
  ·Attachment of the rubber ring can be easily confirmed.
  ·Correct construction is possible by managing extra screws.
  ·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
  · Made in Japan.
  ·GOOD DESIGN award winning product.
  [Applications]
  ·For changing the size of the branches of buried lining pipes.

  Standard Price:	1,440,167 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Pipe Fittings - Three-way Reducing T

  HITACHI KINZOKU

  A small to medium diameter steel pipe fitting that uses screw connection; JIS B 2301 specifies it as "screw-in type malleable cast iron pipe fitting". Hot dip galvanizing reduces impact on the environment.

  CAD ：

  2D

  Standard Price:	632,654 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Pipe Fitting, Reducing Tess

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Standard Price:	736,653 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Corrosion Resistant Pipe End Fitting T

  HITACHI KINZOKU

  By integral molded polyolefin resin visceral core, hide the iron land exposed portion of the tube end of the screw back and lining steel pipes from the fluid, and provide an excellent anti-corrosion effect. It is easy to construct management because it is integrally molded.

  CAD ：

  2D

  Standard Price:	890,500 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting With Sealant, WS Fitting, Reducing Cross

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.

  Standard Price:	1,458,768 IDR
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting with Sealing Agent WS Fitting Three-Sided Diameter Differential T

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.

  Standard Price:	767,330 IDR
  Days to Ship:	15 Day(s) or more

• 

  Pipe Fitting with Sealant, WS Fitting, Variable Diameter T

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.

  Standard Price:	904,586 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Drainage Screw Fitting 90° Y

  HITACHI KINZOKU

  Working fluids are sewage, effluents, ventilated air, and rainwater. The materials, shapes, dimensions, and precision conform to the Japanese Industrial Standard (JIS B 2303 Screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	584,925 IDR
  Days to Ship:	15 Day(s) or more

• 

  90° Long Radius Drainage Fitting

  HITACHI KINZOKU

  Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	757,784 IDR
  Days to Ship:	9 Day(s) or more

• 

  Drainage Screw Fitting, 45°Y

  HITACHI KINZOKU

  Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	970,375 IDR-
  Days to Ship:	16 Day(s) or more

• 

  ZD Fitting, White Type, Reducing Tees

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at 120°C or below), 1.0 MPa (steam, air, gas, and oil at 300°C or below)
  
  [Features]
  · For the ZD fitting, the screw portion of the screw-on malleable cast iron pipe fitting has been coated with a fluorine polymer resin (as a sealant) and heat-cured.
  · Two types are available: a white type and a Komacoat type (see screw-type malleable cast iron fitting).
  · Application of sealant and winding of sealant tape are not required reducing the number of man-hours required to run pipes.
  · Provides stable sealing performance.
  · Prevents rusting on threads included on parts that are stored for an extended period of time.
  · *Komacoat types are made to order.

  Standard Price:	901,069 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Fitting for Steel Pipes, Screw-in Type Pipe Fitting, Reducing Tee

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	688,605 IDR-
  Days to Ship:	20 Day(s) or more

• 

  ESLON, Eslo-Coat LX Fitting Reducing Tees (RT)

  SEKISUI CHEMICAL

  The core is adhered to the inner side of the lining steel pipe, effectively blocking permeation of the water onto the metal surface, and corrosion of the tube end portion, the fitting body and the like are prevented.
  
  [Features]
  · ESLON Eslo-Coat LX joint is an anti-corrosion joint with a built-in core where the "core" tightly adheres to the inner surface of the lined steel pipe, and effectively prevents water from entering into the metal surface of the joint.
  · Fitting interior is all coated with resin.
  · The core prevents pipe-end corrosion and is integrated with the protective layer to significantly improve resistance to corrosion.
  · Integrated core suitable for pipe juncture and pipe end anticorrosion.
  ▪ Uses hard vinyl chloride or denatured polyphenylene ether, which are confirmed to be hygienic and can therefore be used for supplying water.

  CAD ：

  2D

  Standard Price:	891,667 IDR-
  Days to Ship:	18 Day(s) or more

• 

  Pre-Seal E-white Fitting Three-way Reducer Tee

  CK KINZOKU

  [Features]·Easy installation with pre seal white fitting. / Reduced torque for large-diameter screw-in. / Constant installation quality

  Standard Price:	894,195 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Pre-Seal e white Fitting Reducer Tee

  CK KINZOKU

  [Features]·Easy installation with pre seal white fitting. / Reduced torque for large-diameter screw-in. / Constant installation quality

  Standard Price:	762,188 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Pre-Seal 20k Fitting Normal Type (for Fire Extinguishing Pipe) Reducer Tee

  CK KINZOKU

  [Features]
  ·Eliminates the need to apply sealant.
  ·Light screwing torque.
  ·The screws do not rust.

  Standard Price:	1,431,000 IDR
  Days to Ship:	11 Day(s) or more

• 

  Pre-Sealed Core Fitting, Normal Type, for Connection of Lining Steel Pipes, Tees with Different Diameters

  CK KINZOKU

  [Features]·Easy installation with pre seal core fitting. / Reduces torque for large-diameter screw-in. / No more leakage of seal material into pipes. / Constant installation quality

  Standard Price:	899,833 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Pre-Seal Core Transparent PC Core Fitting Normal Type TPC Series Reducer Tee for Connection of Lining Steel Pipes

  CK KINZOKU

  [Features]With pre seal transparent PC core fitting, defects during installation can be visually checked. Furthermore, installation completion can be seen at a glance

  Standard Price:	1,440,167 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Core Fittings - for Lining Steel Pipe Connection - Tee with Different Diameters

  CK KINZOKU

  Threaded fittings for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
  [Features]
  ·No PVC is used in the core joints. Easy to recycle.
  ·Excellent anti-corrosion performance due to the double structure of lip and O-ring.
  ·Also supports rolled screws.
  · Made in Japan.
  [Applications]
  ·For branch size conversion of lining piping.

  Standard Price:	883,251 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Ck 20 K Screw-in Fitting Tee with Different Diameters

  CK KINZOKU

  Fittings for fire extinguishing pressure piping.
  [Features]
  ·Certified by the Japan Fire Equipment Safety Center.
  [Applications]
  ·For removing branches from STPG VS pipes.

  Standard Price:	1,431,000 IDR
  Days to Ship:	11 Day(s) or more

• 

  Pressure Pipe Exterior Cladding 20 K Fitting Tee with Different Diameters

  CK KINZOKU

  Buried joint for pressure piping.
  [Features]
  ·Vinyl chloride is not used in the outer resin, so it can be recycled together with iron without separation.
  ·Certified by the Japan Fire Equipment Safety Center.
  [Applications]
  ·For removing branches from STPG VS pipes.

  Standard Price:	3,716,273 IDR
  Days to Ship:	11 Day(s) or more

• 

  External Surface Transparent Coating for Fire Protection Piping 10 K Fittings VF Gold, Unequal Diameter Tee

  CK KINZOKU

  Buried joint for fire extinguishing piping.
  [Features]
  ·Attachment of the rubber ring can be easily confirmed.
  ·Correct construction is possible by managing extra screws.
  ·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
  · Made in Japan.
  ·GOOD DESIGN award winning product.
  [Applications]
  ·For removing VS piping branches.

  Standard Price:	1,245,167 IDR
  Days to Ship:	11 Day(s) or more

• 

  Screw-In PL Fitting, Reducing Tee with Collar (Small Branch Diameter)

  JFEPIPEFITTING

  [Features]
  • JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
  • Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
  • Can be used with a high level of reliability.

  Standard Price:	1,763,167 IDR-
  Days to Ship:	18 Day(s) or more

• 

  Screw-In Malleable Cast Iron Pipe Fitting, Reducing Tee with Collar (Small Branch Diameter)

  JFEPIPEFITTING

  [Features]
  • JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
  • Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
  • Can be used with a high level of reliability.

  Standard Price:	1,397,167 IDR-
  Days to Ship:	18 Day(s) or more

• 

  Screw Sealing Agent-Coated Screw Type Malleable Cast Iron Pipe Fitting, PS20K Continuous Feeding Piping Fitting, Reducing Tee

  JFEPIPEFITTING

  [Features]
  • PS fitting which employs a fluorine sealant, simplifying construction work.
  • Excellent sealing performance.
  • Excellent installability.
  • Wide range of varieties and sizes.

  Standard Price:	4,644,192 IDR-
  Days to Ship:	18 Day(s) or more

• 

  Fire Extinguishing Piping Screw-In Outer Surface Anti-Corrosive Fitting, K-PLV Fitting, Reducing Tee

  JFEPIPEFITTING

  [Features]
  • Fitting exterior is coated with polyvinyl chloride resin and produces highly corrosion resistant piping by bonding with SGP-VS.
  • Use of a sleeve and rubber ring (or caulking tape) with a special conformation isolates tubes and screw joints from an external corrosive environment. Provides an excellent corrosion-proofing effect.
  • The fitting that is used is a zinc-plated ring screw-in malleable cast iron pipe fitting.

  Standard Price:	1,948,193 IDR-
  Days to Ship:	18 Day(s) or more

• 

  Pipe-End Anticorrosion Fitting for Water Supply Dual-Use Type, Core Fitting, CD Core, Reducing Tee

  JFEPIPEFITTING

  [Features]
  • Mechanism for preventing rust water support for soft installations, regardless of pipe type.
  • JFE dual purpose core fitting.
  • Compatible with two-pipe types.
  • Excellent corrosion-proof performance. A double layer structure including a lip and ring provides superior installability.
  • Wide product assortment.
  • Flanges produced by the manufacturer can be securely used for butterfly valves.
  • Compatible with rolling threading.

  Standard Price:	4,146,259 IDR-
  Days to Ship:	18 Day(s) or more

• 

  Pipe-End Anticorrosion Fitting for Water Supply Dual-Use Type, Core Fitting, C Core, Reducing Tee

  JFEPIPEFITTING

  [Features]
  • Mechanism for preventing rust water support for soft installations, regardless of pipe type.
  • JFE dual purpose core fitting.
  • Compatible with two-pipe types.
  • Excellent corrosion-proof performance. A double layer structure including a lip and ring provides superior installability.
  • Wide product assortment.
  • Flanges produced by the manufacturer can be securely used for butterfly valves.
  • Compatible with rolling threading.

  Standard Price:	2,116,907 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Continuous Feeding Pipe Fitting, Buried Tee

  JFEPIPEFITTING

  [Features]
  • Ideal for pressurized piping.
  • Product has superior pressure resistance properties and strength.
  • Features superior workability.
  • Since installation is the same as a conventional screwed type tube fitting, it is safe and convenient.
  • High cost efficiency.
  • Product has superior durability and is economical as it allows for a reduction in material and construction costs.

  Standard Price:	15,821,701 IDR
  Days to Ship:	18 Day(s) or more

Loading...