Screw Fittings, Screw-In Type Flanges（Nominal of Thread M2：3B(80A)）

• 

  Stainless Steel Screw-in Fitting, Reduced Bushing

  KITZ

  KITZ, Screw-in Fitting / Screw-in Flange, Stainless Steel Reducing Screw-in Bushing

  CAD ：

  2D

  Standard Price:	1,274,833 IDR
  Days to Ship:	13 Day(s) or more

• 

  ZD Fitting - White Bushing

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	697,395 IDR
  Days to Ship:	20 Day(s) or more

• 

  Stainless Steel Screw-in Pipe Fitting, Bushing

  NAGOYA

  NAGOYA, screw-in fitting / threaded type flange, stainless steel screw-in pipe fitting, bushing.

  Standard Price:	1,751,609 IDR
  Days to Ship:	14 Day(s) or more

• 

  Pipe Fitting with Sealant, WS Fitting, Variable Diameter Elbow

  HITACHI KINZOKU

  The female fitting screws are coated with a fluororesin pre-coat sealant. Wrapping sealing tape around the male threaded section of connecting pipes is not required for nominal 4B or below. The fluorine-based sealant has a lubricating effect, and therefore reduces the burden of piping work.

  Standard Price:	1,526,880 IDR
  Days to Ship:	16 Day(s) or more

• 

  Fitting for Steel Pipes, Screw-in Type Pipe Fitting, Reducing Tee

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	688,605 IDR-
  Days to Ship:	20 Day(s) or more

• 

  PC Core Fittings, for Lined Steel Pipe Connection, Unequal Diameter Tee

  CK KINZOKU

  Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
  Pipe end anti-corrosion joints for inner and outer surface lining steel pipes with excellent anti-corrosion performance by coating the outer surface of the core joint with a thick polyamide resin or the like.
  [Features]
  ·It has excellent anti-corrosion performance.
  ·The socket sleeve is made long and completely wraps around the tube sheath.
  ·The gap between the pipe and joint is sealed with a special rubber ring or caulking tape to prevent water from entering and to provide electrical insulation.
  ·It has excellent corrosion resistance and weather resistance.
  ·There is no need to worry about corrosion even when buried in salty soil, soil or concrete where local batteries are likely to occur, or where there is a lot of stray current.
  ·Increase efficiency of piping construction.
  ·By using rubber rings, there is no need to wrap anti-corrosion tape around the body of the joint and where it connects to the pipe, which speeds up the installation of pipes.
  [Applications]
  ·For branch size conversion of buried lining piping.

  Standard Price:	3,350,833 IDR
  Days to Ship:	11 Day(s) or more

• 

  Screw-In PL Fitting, Bushing

  JFEPIPEFITTING

  [Features]
  ・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
  ・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
  ・ Both products are safe to use

  Standard Price:	971,500 IDR
  Days to Ship:	16 Day(s) or more

• 

  Screw-In Malleable Cast Iron Pipe Fitting, Reducing Elbow with Collar

  JFEPIPEFITTING

  [Features]
  • JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
  • Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
  • Can be used with a high level of reliability.

  Standard Price:	1,354,667 IDR-
  Days to Ship:	18 Day(s) or more

• 

  Screw-In Malleable Cast Iron Pipe Fitting, Reducing Elbow

  JFEPIPEFITTING

  [Features]
  ・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
  ・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
  ・ Both products are safe to use

  Standard Price:	1,354,667 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Stainless Steel Screw-in Pipe Fitting, Straight Elbow

  NAGOYA

  NAGOYA, screw-in fitting / threaded type flange, stainless steel screw-in pipe fitting, street elbow.

  Standard Price:	2,313,608 IDR
  Days to Ship:	14 Day(s) or more

• 

  Pipe Fitting Socket

  HITACHI KINZOKU

  JIS B 2301 screw-in type malleable cast iron fitting
  
  [Features]
  · Environmentally friendly: Lead and cadmium are greatly reduced.
  · Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
  · Excellent manufacturing method: New heavy metal addition is not required.
  · Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
  · Excellent performance: Appearance and performance equivalent to conventional plated parts.
  · Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.

  CAD ：

  2D

  Standard Price:	612,626 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting, Reducing Elbow

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for steel pipes with small to medium diameters; JIS B 2301 specifies it as "screwed type malleable cast iron pipe fitting". Hot zinc plating reduces environmental burden.

  CAD ：

  2D

  Standard Price:	1,248,722 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fittings - Three-way Reducing T

  HITACHI KINZOKU

  A small to medium diameter steel pipe fitting that uses screw connection; JIS B 2301 specifies it as "screw-in type malleable cast iron pipe fitting". Hot dip galvanizing reduces impact on the environment.

  CAD ：

  2D

  Standard Price:	1,475,280 IDR
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting, Reducing Tess

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Standard Price:	736,653 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting - Female/Male T

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Standard Price:	800,611 IDR
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting, Nipple

  HITACHI KINZOKU

  JIS B 2301. Hot dip galvanizing is an excellent plating with a low environmental load.
  
  [Features]
  · Environmentally friendly: Lead and cadmium are greatly reduced.
  · Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
  · Excellent manufacturing method: New heavy metal addition is not required.
  · Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
  · Excellent performance: Appearance and performance equivalent to conventional plated parts.
  · Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.

  CAD ：

  2D

  Standard Price:	781,004 IDR
  Days to Ship:	17 Day(s) or more

• 

  Pipe Fitting, Bushing

  HITACHI KINZOKU

  A tube fitting bushing—manufactured by Hitachi Metals Ltd., with a track record in Japan for top-class quality screw fittings/pipe components.
  -Working fluid: water, air, steam, gas, oil
  -Surface treatment: as-cast, galvanized

  CAD ：

  2D

  Standard Price:	570,675 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Pipe End Anti-Corrosion Pipe Fittings Elbow

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Standard Price:	1,398,968 IDR
  Days to Ship:	15 Day(s) or more

• 

  Corrosion Resistant Pipe End Fitting T

  HITACHI KINZOKU

  By integral molded polyolefin resin visceral core, hide the iron land exposed portion of the tube end of the screw back and lining steel pipes from the fluid, and provide an excellent anti-corrosion effect. It is easy to construct management because it is integrally molded.

  CAD ：

  2D

  Standard Price:	890,500 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Pipe End Corrosion Prevention Fitting Socket

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Standard Price:	768,800 IDR
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting with Sealant, WS Fitting, Variable Diameter Socket

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. The wrapping of sealing tape around the threaded section of the connecting pipes is not required for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, and therefore reduces the burden of piping work.

  Standard Price:	753,914 IDR
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting with Sealant, WS Fitting, Variable Diameter T

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.

  Standard Price:	904,586 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Pipe Fitting With Sealant, WS Fitting, Bushing

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. Wrapping sealing tape around the threaded section of connecting pipes is not required for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, and therefore reduces the burden of piping work.

  Standard Price:	701,282 IDR
  Days to Ship:	16 Day(s) or more

• 

  HB Fitting, Socket

  HITACHI KINZOKU

  Use the HB fitting for coupling feed water pipes, piping connected water supplies, transporting fire extinguishing equipment with inert gases (carbon dioxide), and other piping subject to Schedules 40 and 80 of JIS G 3454, carbon steel tube for pressure services.

  Standard Price:	1,125,433 IDR
  Days to Ship:	15 Day(s) or more

• 

  HB Fitting Bushing

  HITACHI KINZOKU

  Use the HB fitting for coupling feed water pipes, piping for connected water supply and fire extinguishing equipment carrying inert gas (carbon dioxide) and other piping subject to Schedules 40 and 80 of JIS G 3454, "Carbon steel tube for pressure service."

  Standard Price:	1,048,033 IDR
  Days to Ship:	16 Day(s) or more

• 

  Drainage Screw Fitting 90° Elbow

  HITACHI KINZOKU

  Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	921,613 IDR
  Days to Ship:	16 Day(s) or more

• 

  Drainage Screw Fitting, 90°, Large Bend Elbow

  HITACHI KINZOKU

  Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	2,081,321 IDR
  Days to Ship:	16 Day(s) or more

• 

  Drainage Screw Fitting 90° Y

  HITACHI KINZOKU

  Working fluids are sewage, effluents, ventilated air, and rainwater. The materials, shapes, dimensions, and precision conform to the Japanese Industrial Standard (JIS B 2303 Screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	1,668,006 IDR
  Days to Ship:	16 Day(s) or more

• 

  90° Long Radius Drainage Fitting

  HITACHI KINZOKU

  Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	2,081,321 IDR
  Days to Ship:	16 Day(s) or more

• 

  Drainage Screw Fitting, 45°Y

  HITACHI KINZOKU

  Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	970,375 IDR
  Days to Ship:	16 Day(s) or more

• 

  Drainage Screw Fitting Socket

  HITACHI KINZOKU

  Usable fluids are sewage, effluents, ventilated air, and rainwater. The materials, shapes, dimensions, and precision conform to the Japanese Industrial Standards (JIS B 2303 Screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	791,581 IDR
  Days to Ship:	16 Day(s) or more

• 

  Black or white Fitting Reducing Socket

  YODOSHI

  Black or white fitting reducing socket that can be used with pipes made of black heart malleable cast iron for water, oil, steam, air or gas.

  Standard Price:	664,500 IDR-
  Days to Ship:	17 Day(s) or more

• 

  ZD Fitting, White Type, Reducing Elbow

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at 120°C or below), 1.0 MPa (steam, air, gas, and oil at 300°C or below)
  
  [Features]
  · For the ZD fitting, the screw portion of the screw-on malleable cast iron pipe fitting has been coated with a fluorine polymer resin (as a sealant) and heat-cured.
  · Two types are available: a white type and a Komacoat type (see screw-type malleable cast iron fitting).
  · Application of sealant and winding of sealant tape are not required reducing the number of man-hours required to run pipes.
  · Provides stable sealing performance.
  · Prevents rusting on threads included on parts that are stored for an extended period of time.
  · *Komacoat types are made to order.

  Standard Price:	1,505,667 IDR
  Days to Ship:	20 Day(s) or more

• 

  ZD Fitting, White, Reducing Socket

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	749,622 IDR-
  Days to Ship:	20 Day(s) or more

• 

  ZD Fitting, White Type, Reducing Tees

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at 120°C or below), 1.0 MPa (steam, air, gas, and oil at 300°C or below)
  
  [Features]
  · For the ZD fitting, the screw portion of the screw-on malleable cast iron pipe fitting has been coated with a fluorine polymer resin (as a sealant) and heat-cured.
  · Two types are available: a white type and a Komacoat type (see screw-type malleable cast iron fitting).
  · Application of sealant and winding of sealant tape are not required reducing the number of man-hours required to run pipes.
  · Provides stable sealing performance.
  · Prevents rusting on threads included on parts that are stored for an extended period of time.
  · *Komacoat types are made to order.

  Standard Price:	901,069 IDR-
  Days to Ship:	16 Day(s) or more

• 

  ZD Fittings, White Goods, Four-Way Reducing Cross

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	2,061,929 IDR
  Days to Ship:	20 Day(s) or more

• 

  Steel Pipe Fitting, Screw-In Pipe Fitting, Street Elbow

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	650,833 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Steel Pipe Fitting, Screw-in Type Pipe Joint, Bushing

  RIKEN

  Material: Black malleable cast iron (FCMB27-05)
  · Applicable fluids: Water, air, steam, gas, oil.
  · Surface treatment: Raw casting, dissolved zinc plating, epoxy resin coating.

  Standard Price:	532,934 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Reducing Elbow Pipe Fittings for Steel Pipes, Screw-In

  RIKEN

  Maximum operating pressure: 2.5 MPa (static water: ≤ 120°C), 1.0 MPa (vapor, air, gas, and oil: ≤ 300°C).

  Standard Price:	1,166,775 IDR-
  Days to Ship:	20 Day(s) or more

• 

  Fitting for Steel Pipes, Screw-in Type Pipe Fitting, Reducing Socket

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	572,823 IDR-
  Days to Ship:	20 Day(s) or more

• 

  Steel Pipe Fitting, Threaded Pipe Fitting, 4-Way Reducing Cross

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	1,360,815 IDR
  Days to Ship:	20 Day(s) or more

• • On Sale Till 31/03/2025

  

  Stainless Steel Screw-in Fitting, Hexagonal Bushing B

  ON INDUSTRIES

  It is a stainless steel screw-in fitting, hexagonal bushing B, made by O.N. Industries.

  Standard Price:	1,688,383 IDR-
  	Special Price
  Days to Ship:	16 Day(s) or more

• 

  ESLON, Eslo-Coat LX Fitting, Reducing Socket (RS)

  SEKISUI CHEMICAL

  The core is adhered to the inner surface of the lined steel pipe, effectively blocking the permeation of water to the metal surface, and thereby preventing corrosion of the tube end portion and the fitting body.

  CAD ：

  2D

  Standard Price:	812,333 IDR
  Days to Ship:	18 Day(s) or more

• 

  ESLON, Eslo-Coat LX Fitting Reducing Tees (RT)

  SEKISUI CHEMICAL

  The core is adhered to the inner side of the lining steel pipe, effectively blocking permeation of the water onto the metal surface, and corrosion of the tube end portion, the fitting body and the like are prevented.
  
  [Features]
  · ESLON Eslo-Coat LX joint is an anti-corrosion joint with a built-in core where the "core" tightly adheres to the inner surface of the lined steel pipe, and effectively prevents water from entering into the metal surface of the joint.
  · Fitting interior is all coated with resin.
  · The core prevents pipe-end corrosion and is integrated with the protective layer to significantly improve resistance to corrosion.
  · Integrated core suitable for pipe juncture and pipe end anticorrosion.
  ▪ Uses hard vinyl chloride or denatured polyphenylene ether, which are confirmed to be hygienic and can therefore be used for supplying water.

  CAD ：

  2D

  Standard Price:	891,667 IDR-
  Days to Ship:	18 Day(s) or more

• 

  Pre-Seal e white Fitting Reducer Elbow

  CK KINZOKU

  [Features]·Easy installation with pre seal white fitting. / Reduced torque for large-diameter screw-in. / Constant installation quality

  Standard Price:	1,635,333 IDR
  Days to Ship:	11 Day(s) or more

Loading...