Screw Fittings, Screw-In Type Flanges（Nominal of Thread M2：2 1/2B(65A)）

• 

  Stainless Steel Screw-in Fitting, Reduced Bushing

  KITZ

  KITZ, Screw-in Fitting / Screw-in Flange, Stainless Steel Reducing Screw-in Bushing

  CAD ：

  2D

  Standard Price:	927,775 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Pipe Fitting, Reducing Elbow

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for steel pipes with small to medium diameters; JIS B 2301 specifies it as "screwed type malleable cast iron pipe fitting". Hot zinc plating reduces environmental burden.

  CAD ：

  2D

  Standard Price:	714,310 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting with Sealant, WS Fitting, Variable Diameter Elbow

  HITACHI KINZOKU

  The female fitting screws are coated with a fluororesin pre-coat sealant. Wrapping sealing tape around the male threaded section of connecting pipes is not required for nominal 4B or below. The fluorine-based sealant has a lubricating effect, and therefore reduces the burden of piping work.

  Standard Price:	876,722 IDR-
  Days to Ship:	16 Day(s) or more

• 

  90° Long Radius Drainage Fitting

  HITACHI KINZOKU

  Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	1,016,815 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Steel Pipe Fitting, Screw-in Type Pipe Joint, Bushing

  RIKEN

  Material: Black malleable cast iron (FCMB27-05)
  · Applicable fluids: Water, air, steam, gas, oil.
  · Surface treatment: Raw casting, dissolved zinc plating, epoxy resin coating.

  Standard Price:	276,186 IDR-
  Days to Ship:	9 Day(s) or more

• • On Sale Till 31/03/2025

  

  Stainless Steel Screw-in Fitting, Hexagonal Bushing B

  ON INDUSTRIES

  It is a stainless steel screw-in fitting, hexagonal bushing B, made by O.N. Industries.

  Standard Price:	843,262 IDR-
  	Special Price
  Days to Ship:	16 Day(s) or more

• 

  Screw-in Malleable Cast Iron Pipe Fitting, Bushing

  JFEPIPEFITTING

  [Features]
  ・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
  ・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
  ・ Both products are safe to use

  Standard Price:	186,167 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Pipe Fitting Socket

  HITACHI KINZOKU

  JIS B 2301 screw-in type malleable cast iron fitting
  
  [Features]
  · Environmentally friendly: Lead and cadmium are greatly reduced.
  · Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
  · Excellent manufacturing method: New heavy metal addition is not required.
  · Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
  · Excellent performance: Appearance and performance equivalent to conventional plated parts.
  · Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.

  CAD ：

  2D

  Standard Price:	368,675 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting, Reducing Tess

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Standard Price:	532,373 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fittings, Cross (With Clamp)

  HITACHI KINZOKU

  A plumbing fitting that uses screw connection for steel pipes with a small to medium diameter; JIS B 2301 describes it as a "screw-type, malleable, cast iron pipe fitting." Hot zinc plating reduces the environmental impact.

  CAD ：

  2D

  Standard Price:	1,104,019 IDR
  Days to Ship:	17 Day(s) or more

• 

  Pipe Fitting with Sealing Agent WS Fitting Three-Sided Diameter Differential T

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.

  Standard Price:	1,053,192 IDR
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting With Sealant, WS Fitting, Bushing

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. Wrapping sealing tape around the threaded section of connecting pipes is not required for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, and therefore reduces the burden of piping work.

  Standard Price:	367,947 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Black or white Fitting Reducing Socket

  YODOSHI

  Black or white fitting reducing socket that can be used with pipes made of black heart malleable cast iron for water, oil, steam, air or gas.

  Standard Price:	405,333 IDR-
  Days to Ship:	17 Day(s) or more

• 

  ZD Fitting, White Type, Reducing Tees

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at 120°C or below), 1.0 MPa (steam, air, gas, and oil at 300°C or below)
  
  [Features]
  · For the ZD fitting, the screw portion of the screw-on malleable cast iron pipe fitting has been coated with a fluorine polymer resin (as a sealant) and heat-cured.
  · Two types are available: a white type and a Komacoat type (see screw-type malleable cast iron fitting).
  · Application of sealant and winding of sealant tape are not required reducing the number of man-hours required to run pipes.
  · Provides stable sealing performance.
  · Prevents rusting on threads included on parts that are stored for an extended period of time.
  · *Komacoat types are made to order.

  Standard Price:	651,251 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Steel Pipe Fitting, Screw-In Pipe Fitting, Street Elbow

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	374,896 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Fitting for Steel Pipes, Screw-in Type Pipe Fitting, Reducing Socket

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	344,471 IDR-
  Days to Ship:	20 Day(s) or more

• 

  Core Fittings - for Lining Steel Pipe Connection - Tee with Different Diameters

  CK KINZOKU

  Threaded fittings for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
  [Features]
  ·No PVC is used in the core joints. Easy to recycle.
  ·Excellent anti-corrosion performance due to the double structure of lip and O-ring.
  ·Also supports rolled screws.
  · Made in Japan.
  [Applications]
  ·For branch size conversion of lining piping.

  Standard Price:	1,141,566 IDR-
  Days to Ship:	11 Day(s) or more

• 

  External Surface Transparent Coating for Fire Protection Piping 10 K Fittings VF Gold, Unequal Diameter Elbow

  CK KINZOKU

  Buried joint for fire extinguishing piping.
  [Features]
  ·Attachment of the rubber ring can be easily confirmed.
  ·Correct construction is possible by managing extra screws.
  ·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
  · Made in Japan.
  ·GOOD DESIGN award winning product.
  [Applications]
  ·For changing the size of bends in VS pipes.

  Standard Price:	1,541,333 IDR
  Days to Ship:	11 Day(s) or more

• 

  Screw-In PL Fitting, Bushing

  JFEPIPEFITTING

  [Features]
  ・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
  ・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
  ・ Both products are safe to use

  Standard Price:	693,500 IDR
  Days to Ship:	16 Day(s) or more

• 

  Screw-In Malleable Cast Iron Pipe Fitting, Street Elbow (with Collar)

  JFEPIPEFITTING

  [Features]
  ・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
  ・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
  ・ Both products are safe to use

  Standard Price:	576,000 IDR
  Days to Ship:	12 Day(s) or more

• 

  Screw-In Malleable Cast Iron Pipe Fitting, Reducing Elbow

  JFEPIPEFITTING

  [Features]
  ・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
  ・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
  ・ Both products are safe to use

  Standard Price:	1,006,167 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Screw-In Malleable Cast Iron Pipe Fitting, Reducing Socket

  JFEPIPEFITTING

  [Features]
  ・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
  ・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
  ・ Both products are safe to use

  Standard Price:	486,333 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fittings - Three-way Reducing T

  HITACHI KINZOKU

  A small to medium diameter steel pipe fitting that uses screw connection; JIS B 2301 specifies it as "screw-in type malleable cast iron pipe fitting". Hot dip galvanizing reduces impact on the environment.

  CAD ：

  2D

  Standard Price:	868,466 IDR
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting - Female/Male T

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Standard Price:	764,492 IDR
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting, Nipple

  HITACHI KINZOKU

  JIS B 2301. Hot dip galvanizing is an excellent plating with a low environmental load.
  
  [Features]
  · Environmentally friendly: Lead and cadmium are greatly reduced.
  · Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
  · Excellent manufacturing method: New heavy metal addition is not required.
  · Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
  · Excellent performance: Appearance and performance equivalent to conventional plated parts.
  · Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.

  CAD ：

  2D

  Standard Price:	441,477 IDR
  Days to Ship:	17 Day(s) or more

• 

  Pipe Fitting, Bushing

  HITACHI KINZOKU

  A tube fitting bushing—manufactured by Hitachi Metals Ltd., with a track record in Japan for top-class quality screw fittings/pipe components.
  -Working fluid: water, air, steam, gas, oil
  -Surface treatment: as-cast, galvanized

  CAD ：

  2D

  Standard Price:	295,945 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Pipe End Anti-Corrosion Pipe Fittings Elbow

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Standard Price:	806,646 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Corrosion Resistant Pipe End Fitting T

  HITACHI KINZOKU

  By integral molded polyolefin resin visceral core, hide the iron land exposed portion of the tube end of the screw back and lining steel pipes from the fluid, and provide an excellent anti-corrosion effect. It is easy to construct management because it is integrally molded.

  CAD ：

  2D

  Standard Price:	688,500 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Pipe End Corrosion Prevention Fitting Socket

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Standard Price:	440,036 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Pipe Fitting with Sealant, WS Fitting, Variable Diameter Socket

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. The wrapping of sealing tape around the threaded section of the connecting pipes is not required for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, and therefore reduces the burden of piping work.

  Standard Price:	456,699 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Pipe Fitting with Sealant, WS Fitting, Variable Diameter T

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.

  Standard Price:	655,874 IDR-
  Days to Ship:	15 Day(s) or more

• 

  HB Fitting Elbow

  HITACHI KINZOKU

  Use the HB fitting for coupling feed water pipes, piping connected water supplies, transporting fire extinguishing equipment with inert gases (carbon dioxide), and other piping subject to Schedules 40 and 80 of JIS G 3454, carbon steel tube for pressure services.

  Standard Price:	1,548,552 IDR-
  Days to Ship:	15 Day(s) or more

• 

  HB Fitting T

  HITACHI KINZOKU

  [Features]
  ▪ Use the HB fitting in piping such as connected water supply piping and Inert gas (carbon dioxide) fire-extinguishing equipment piping that use Schedule 40, 80 of the carbon steel pipe for JIS G 3454 pressure piping.

  Standard Price:	1,875,695 IDR-
  Days to Ship:	15 Day(s) or more

• 

  HB Fitting, Socket

  HITACHI KINZOKU

  Use the HB fitting for coupling feed water pipes, piping connected water supplies, transporting fire extinguishing equipment with inert gases (carbon dioxide), and other piping subject to Schedules 40 and 80 of JIS G 3454, carbon steel tube for pressure services.

  Standard Price:	670,322 IDR-
  Days to Ship:	16 Day(s) or more

• 

  HB Fitting Bushing

  HITACHI KINZOKU

  Use the HB fitting for coupling feed water pipes, piping for connected water supply and fire extinguishing equipment carrying inert gas (carbon dioxide) and other piping subject to Schedules 40 and 80 of JIS G 3454, "Carbon steel tube for pressure service."

  Standard Price:	557,835 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Drainage Screw Fitting 90° Elbow

  HITACHI KINZOKU

  Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	522,231 IDR
  Days to Ship:	16 Day(s) or more

• 

  Drainage Screw Fitting 90° Y

  HITACHI KINZOKU

  Working fluids are sewage, effluents, ventilated air, and rainwater. The materials, shapes, dimensions, and precision conform to the Japanese Industrial Standard (JIS B 2303 Screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	933,224 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Drainage Screw Fitting, 45°Y

  HITACHI KINZOKU

  Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	631,365 IDR
  Days to Ship:	16 Day(s) or more

• 

  Drainage Screw Fitting Socket

  HITACHI KINZOKU

  Usable fluids are sewage, effluents, ventilated air, and rainwater. The materials, shapes, dimensions, and precision conform to the Japanese Industrial Standards (JIS B 2303 Screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	481,466 IDR
  Days to Ship:	15 Day(s) or more

• 

  Stainless Steel Threaded Pipe Fitting Reducing Socket

  YODOSHI

  A stainless steel, threaded, different-diameter socket pipe fitting—manufactured by Yodoshi Corporation, with a track record in Japan for top-class quality screw fittings/pipe components.
  · Material: stainless steel
  · Working fluid: water, air, steam, chemicals, oil

  Standard Price:	1,523,500 IDR
  Days to Ship:	17 Day(s) or more

• 

  ZD Fitting - White Bushing

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	361,712 IDR-
  Days to Ship:	16 Day(s) or more

• 

  ZD Fitting, White Type, Reducing Elbow

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at 120°C or below), 1.0 MPa (steam, air, gas, and oil at 300°C or below)
  
  [Features]
  · For the ZD fitting, the screw portion of the screw-on malleable cast iron pipe fitting has been coated with a fluorine polymer resin (as a sealant) and heat-cured.
  · Two types are available: a white type and a Komacoat type (see screw-type malleable cast iron fitting).
  · Application of sealant and winding of sealant tape are not required reducing the number of man-hours required to run pipes.
  · Provides stable sealing performance.
  · Prevents rusting on threads included on parts that are stored for an extended period of time.
  · *Komacoat types are made to order.

  Standard Price:	861,000 IDR-
  Days to Ship:	16 Day(s) or more

• 

  ZD Fitting, White, Reducing Socket

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	451,464 IDR-
  Days to Ship:	16 Day(s) or more

• 

  ZD Fitting, White, 3-Way Reducing Tees

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	1,049,979 IDR
  Days to Ship:	16 Day(s) or more

• 

  ZD Fittings, White Goods, Four-Way Reducing Cross

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	1,457,835 IDR
  Days to Ship:	16 Day(s) or more

Loading...