Screw Fittings, Screw-In Type Flanges（Nominal of Thread M2：2B(50A)）

• • On Sale Till 31/03/2025

  

  Low Pressure Fittings/90 Deg. Elbow/Threaded and Tapped

  MISUMI

  [Connection Type]Thread to thread, same diameter / different type; Connection shape: Female/male elbow; Material: You can choose SCS13A or FCMB270.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	216,099 IDR-
  	Special Price
  Days to Ship:	14 Day(s) or more

• • On Sale Till 31/03/2025

  

  Low Pressure Screw Fittings - Equal Dia. / Reducing - Bushings

  MISUMI

  [Material]·Stainless Steel/Steel "Fluid used," Pulsating Water/Air/Steam/Gas/Oil

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	145,341 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Screw-In Malleable Cast Iron Pipe Fitting, Reducing Socket

  JFEPIPEFITTING

  [Features]
  ・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
  ・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
  ・ Both products are safe to use

  Standard Price:	303,500 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Stainless Steel Screw-in Fitting, Reducing Tee

  KITZ

  [Product Specifications]Material: SCS13A, Surface treatment: None, Fluid used: Water/Air/Steam/Gas/Oil

  Standard Price:	893,970 IDR
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel Screw-in Fitting, Reduced Bushing

  KITZ

  KITZ, Screw-in Fitting / Screw-in Flange, Stainless Steel Reducing Screw-in Bushing

  CAD ：

  2D

  Standard Price:	674,239 IDR-
  Days to Ship:	8 Day(s) or more

• 

  ZD Fitting - White Bushing

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	263,286 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Stainless Steel Screw-in Pipe Fitting, Bushing

  NAGOYA

  NAGOYA, screw-in fitting / threaded type flange, stainless steel screw-in pipe fitting, bushing.

  Standard Price:	677,951 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Pipe Fitting, 45° Female Male Elbow (With Clamp)

  HITACHI KINZOKU

  [Features]
  A pipe fitting that uses screws to connect steel pipes of small to medium diameter, referred to in JIS B2301 as a "Screw-in type malleable cast iron pipe fitting".
  Some non-JIS standard products are also produced.
  · The main material is Mareburu® (blackheart malleable cast iron), the threaded portion has a taper pipe thread, and hot-dip galvanization is used if the surface is to be processed.
  • Changed to hot-dip galvanization to reduce environmental burden (RoSH compliant).

  CAD ：

  2D

  Standard Price:	273,003 IDR
  Days to Ship:	14 Day(s) or more

• 

  Screw-in Fitting for High Pressure, PT SL/Street Elbow

  FUJI SPECIAL

  [Features]Threaded stem (PT); Material: Stainless steel (SUS304)/Carbon steel (S25C); Fluid used: Water/Steam/Oil

  CAD ：

  2D

  Standard Price:	891,940 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Stainless Steel Screw-in Fitting, Straight Elbow

  KITZ

  KITZ, Screw-in Fitting / Screw-in Flange, Stainless Steel Screw-in Street Elbow

  Standard Price:	641,237 IDR
  Days to Ship:	8 Day(s) or more

• 

  Pipe Fitting, Female/Male Socket

  HITACHI KINZOKU

  A plumbing fitting that uses screw connection for steel pipes with small to medium diameter; JIS B 2301 specifies it as "screwed type malleable cast iron pipe fitting". Hot zinc plating reduces environmental burden.

  CAD ：

  2D

  Standard Price:	204,633 IDR
  Days to Ship:	14 Day(s) or more

• 

  Pipe Fitting - Female/Male T

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Standard Price:	307,575 IDR
  Days to Ship:	14 Day(s) or more

• 

  Pipe Fitting with Sealant, WS Fitting, Variable Diameter Elbow

  HITACHI KINZOKU

  The female fitting screws are coated with a fluororesin pre-coat sealant. Wrapping sealing tape around the male threaded section of connecting pipes is not required for nominal 4B or below. The fluorine-based sealant has a lubricating effect, and therefore reduces the burden of piping work.

  Standard Price:	648,650 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Stainless Steel Threaded Pipe Fitting Reducing Socket

  YODOSHI

  A stainless steel, threaded, different-diameter socket pipe fitting—manufactured by Yodoshi Corporation, with a track record in Japan for top-class quality screw fittings/pipe components.
  · Material: stainless steel
  · Working fluid: water, air, steam, chemicals, oil

  Standard Price:	1,523,500 IDR-
  Days to Ship:	8 Day(s) or more

• 

  ZD Fitting, White, 3-Way Reducing Tees

  RIKEN

  Maximum operating pressure: 2.5 MPa (steady flow of water at no more than 120°C or below), 1.0 MPa (steam, air, gas, and oil at no more than 300°C).

  Standard Price:	763,314 IDR-
  Days to Ship:	9 Day(s) or more

• 

  PC Core Fittings, for Lined Steel Pipe Connection, Unequal Diameter Tee

  CK KINZOKU

  Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
  Pipe end anti-corrosion joints for inner and outer surface lining steel pipes with excellent anti-corrosion performance by coating the outer surface of the core joint with a thick polyamide resin or the like.
  [Features]
  ·It has excellent anti-corrosion performance.
  ·The socket sleeve is made long and completely wraps around the tube sheath.
  ·The gap between the pipe and joint is sealed with a special rubber ring or caulking tape to prevent water from entering and to provide electrical insulation.
  ·It has excellent corrosion resistance and weather resistance.
  ·There is no need to worry about corrosion even when buried in salty soil, soil or concrete where local batteries are likely to occur, or where there is a lot of stray current.
  ·Increase efficiency of piping construction.
  ·By using rubber rings, there is no need to wrap anti-corrosion tape around the body of the joint and where it connects to the pipe, which speeds up the installation of pipes.
  [Applications]
  ·For branch size conversion of buried lining piping.

  Standard Price:	1,440,167 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Transparent PC Core Fittings (TPC) - for Lining Steel Pipe Connection - Reducing Tee

  CK KINZOKU

  Embedded threaded joint for polyethylene powder lined steel pipes for water supply and hard vinyl chloride lined steel pipes for water supply.
  [Features]
  ·Attachment of the rubber ring can be easily confirmed.
  ·Correct construction is possible by managing extra screws.
  ·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
  · Made in Japan.
  ·GOOD DESIGN award winning product.
  [Applications]
  ·For changing the size of the branches of buried lining pipes.

  Standard Price:	1,440,167 IDR-
  Days to Ship:	11 Day(s) or more

• 

  External Surface Transparent Coating for Fire Protection Piping 10 K Fittings VF Gold, Unequal Diameter Elbow

  CK KINZOKU

  Buried joint for fire extinguishing piping.
  [Features]
  ·Attachment of the rubber ring can be easily confirmed.
  ·Correct construction is possible by managing extra screws.
  ·Listed in the Ministry of Land, Infrastructure, Transport and Tourism Machinery and Equipment Construction Management Guidelines.
  · Made in Japan.
  ·GOOD DESIGN award winning product.
  [Applications]
  ·For changing the size of bends in VS pipes.

  Standard Price:	1,075,000 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Screw-In PL Fitting, Bushing

  JFEPIPEFITTING

  [Features]
  ・ RING Brand fittings are products produced with state-of-the-art equipment and thorough quality control
  ・ The RING Brand PL fitting has a powder epoxy resin coated on its inner and outer surfaces by a special coating method, excluding the threaded section, and has excellent adhesion, corrosion resistance, etc.
  ・ Both products are safe to use

  Standard Price:	417,333 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Screw-In Malleable Cast Iron Pipe Fitting, Reducing Elbow with Collar

  JFEPIPEFITTING

  [Features]
  • JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
  • Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
  • Can be used with a high level of reliability.

  Days to Ship:	16 Day(s) or more

• 

  Reducing Nipples

  ESCO

  [Connection Type]Thread to Thread, Reducing; Connection shape: Nipple; Material: Black heart malleable cast iron

  Standard Price:	1,534,317 IDR
  Days to Ship:	8 Day(s) or more

• 

  Pipe Fitting, Male and Female Elbow

  HITACHI KINZOKU

  [Features]
  · Pipe fitting manufactured from cold rolled steel plate (SPCC) are also available. A standard ‘Screwed Type Malleable Cast Iron Pipe Fitting’ as specified by JIS B 2301. We also manufacture some non-JIS standard products.
  · The main material is Mareburu® (blackheart malleable cast iron). The threaded section has a tapered pipe thread. Hot-dip galvanized surface treatment is applied where the surface is processed.
  · Hot-dip galvanization has been changed to a superior plating that reduces the environmental burden (RoSH compliant).
  · Environmentally friendly: Lead and cadmium are significantly reduced.
  · We use high-purity zinc metal that largely reduces the inclusion content of lead (Pb) and cadmium (Cd).
  · Superior manufacturing method: No addition of new heavy metals is required.
  · Mass production technology has been established by developing a unique production facility and preprocessing method. Heavy metals including bismuth (Bi) are used to replace of lead.
  · Excellent performance: The appearance and performance is equivalent to conventional plated parts.
  · Conforms to the specifications that are specified in JIS B 2301 (Screwed Type Malleable Cast Iron Pipe Fittings). The fitting has an exterior glossy plated finish—similar to the conventional products.

  CAD ：

  2D

  Standard Price:	186,540 IDR
  Days to Ship:	11 Day(s) or more

• 

  Pipe Fitting, Female and Male Bend

  HITACHI KINZOKU

  A plumbing fitting that uses screw connection for steel pipes with a small to medium diameter; JIS B 2301 describes it as a "screw-type, malleable, cast iron pipe fitting." Hot zinc plating reduces the environmental impact.

  CAD ：

  2D

  Standard Price:	344,728 IDR
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting Socket

  HITACHI KINZOKU

  JIS B 2301 screw-in type malleable cast iron fitting
  
  [Features]
  · Environmentally friendly: Lead and cadmium are greatly reduced.
  · Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
  · Excellent manufacturing method: New heavy metal addition is not required.
  · Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
  · Excellent performance: Appearance and performance equivalent to conventional plated parts.
  · Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.

  CAD ：

  2D

  Standard Price:	238,720 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting, Reducing Elbow

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for steel pipes with small to medium diameters; JIS B 2301 specifies it as "screwed type malleable cast iron pipe fitting". Hot zinc plating reduces environmental burden.

  CAD ：

  2D

  Standard Price:	527,585 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fittings - Three-way Reducing T

  HITACHI KINZOKU

  A small to medium diameter steel pipe fitting that uses screw connection; JIS B 2301 specifies it as "screw-in type malleable cast iron pipe fitting". Hot dip galvanizing reduces impact on the environment.

  CAD ：

  2D

  Standard Price:	632,654 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Pipe Fitting, Reducing Tess

  HITACHI KINZOKU

  A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.

  CAD ：

  2D

  Standard Price:	234,616 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pipe Fittings, Cross (With Clamp)

  HITACHI KINZOKU

  A plumbing fitting that uses screw connection for steel pipes with a small to medium diameter; JIS B 2301 describes it as a "screw-type, malleable, cast iron pipe fitting." Hot zinc plating reduces the environmental impact.

  CAD ：

  2D

  Standard Price:	544,160 IDR
  Days to Ship:	17 Day(s) or more

• 

  Pipe Fitting, Nipple

  HITACHI KINZOKU

  JIS B 2301. Hot dip galvanizing is an excellent plating with a low environmental load.
  
  [Features]
  · Environmentally friendly: Lead and cadmium are greatly reduced.
  · Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
  · Excellent manufacturing method: New heavy metal addition is not required.
  · Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
  · Excellent performance: Appearance and performance equivalent to conventional plated parts.
  · Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.

  CAD ：

  2D

  Standard Price:	298,803 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Pipe Fitting, Union Elbow with Male Screw

  HITACHI KINZOKU

  A plumbing fitting that uses screw connection for steel pipes with a small to medium diameter; JIS B 2301 describes it as a "screw-type, malleable, cast iron pipe fitting." Hot zinc plating reduces the environmental impact.

  CAD ：

  2D

  Standard Price:	544,160 IDR
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting, Bushing

  HITACHI KINZOKU

  A tube fitting bushing—manufactured by Hitachi Metals Ltd., with a track record in Japan for top-class quality screw fittings/pipe components.
  -Working fluid: water, air, steam, gas, oil
  -Surface treatment: as-cast, galvanized

  CAD ：

  2D

  Standard Price:	216,832 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pipe End Anti-Corrosion Pipe Fittings Elbow

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Standard Price:	631,777 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Corrosion Resistant Pipe End Fitting T

  HITACHI KINZOKU

  By integral molded polyolefin resin visceral core, hide the iron land exposed portion of the tube end of the screw back and lining steel pipes from the fluid, and provide an excellent anti-corrosion effect. It is easy to construct management because it is integrally molded.

  CAD ：

  2D

  Standard Price:	259,833 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Pipe End Corrosion Prevention Fitting Socket

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Standard Price:	325,584 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Pipe End Corrosion-Proof Pipe Fitting, Male Adapter Elbow With Corrosion-Proof Screw

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Standard Price:	909,500 IDR
  Days to Ship:	16 Day(s) or more

• 

  Pipe End Anticorrosive Fitting, Male Adapter Socket with Anticorrosive Screw

  HITACHI KINZOKU

  The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.

  CAD ：

  2D

  Standard Price:	847,833 IDR
  Days to Ship:	16 Day(s) or more

• 

  PQWK Fitting for Equipment Connection Bronze Type B Female/Male Socket

  HITACHI KINZOKU

  With the integrated molded polyolefin resin core, the thread and the exposed portion of the steel pipe lining are shielded from fluid, giving an excellent anti-corrosion effect. As a single piece it is easy to install.

  CAD ：

  2D

  Standard Price:	775,328 IDR
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting With Sealant, WS Fitting, Reducing Cross

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.

  Standard Price:	1,458,768 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Pipe Fitting with Sealant, WS Fitting, Variable Diameter Socket

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. The wrapping of sealing tape around the threaded section of the connecting pipes is not required for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, and therefore reduces the burden of piping work.

  Standard Price:	362,798 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Pipe Fitting with Sealing Agent WS Fitting Three-Sided Diameter Differential T

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.

  Standard Price:	767,330 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Pipe Fitting with Sealant, WS Fitting, Variable Diameter T

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.

  Standard Price:	293,643 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Pipe Fitting With Sealant, WS Fitting, Bushing

  HITACHI KINZOKU

  Fitting screws are coated with fluororesin pre-coated sealant. Wrapping sealing tape around the threaded section of connecting pipes is not required for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, and therefore reduces the burden of piping work.

  Standard Price:	268,875 IDR-
  Days to Ship:	16 Day(s) or more

• 

  HB Fitting T

  HITACHI KINZOKU

  [Features]
  ▪ Use the HB fitting in piping such as connected water supply piping and Inert gas (carbon dioxide) fire-extinguishing equipment piping that use Schedule 40, 80 of the carbon steel pipe for JIS G 3454 pressure piping.

  Standard Price:	4,646,608 IDR
  Days to Ship:	16 Day(s) or more

• 

  HB Fitting Bushing

  HITACHI KINZOKU

  Use the HB fitting for coupling feed water pipes, piping for connected water supply and fire extinguishing equipment carrying inert gas (carbon dioxide) and other piping subject to Schedules 40 and 80 of JIS G 3454, "Carbon steel tube for pressure service."

  Standard Price:	431,931 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Drainage Screw Fitting 90° Elbow

  HITACHI KINZOKU

  Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).

  CAD ：

  2D

  Standard Price:	357,369 IDR-
  Days to Ship:	15 Day(s) or more

Loading...