Electromagnetic Valves（Plumbing Thread Nominal：1 Page2）

• 

  Pilot-Operated 2 Ports Electromagnetic Valve Multilex Valve APK11 Series

  CKD

  Multilex valve series for controlling various fluids including water, air, oil, and vacuum.

  CAD ：

  2D / 3D

  Standard Price:	1,980,000 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Solenoid Valve DP-100-C Series

  YOSHITAKE

  [Features]
  · Applicable with steam, cold water, air as well as a variety of other media including nitrogen gas, carbon dioxide (in dry state), argon gas and oil (20cSt or less).
  · 600,000 or above opening/closing operations cleared.
  · The "ANTI STICKING MECHANISM" employed on the valve sliding part makes prevents scaling 3 times more than the conventional models.
  · The stainless steel body including the main internal components makes it stainless and more durable.
  · Employs cartridge type components, making maintenance drastically easier.
  · Uses PTFE (fluoropolymer) gaskets for improved airtightness.
  · Can be used within a wide range of temperature from 0 to 1.0MPa. (When coil is horizontal, 0.03 to 1.0MPa)
  · Can be mounted horizontally or vertically (however, when coil is upward, less than 90°).

  CAD ：

  2D

  Standard Price:	9,194,500 IDR
  Days to Ship:	12 Day(s) or more

• 

  WS-22/22N Type Solenoid Valve (for Liquid and Gas) Momotaro II

  VENN

  Production equipment construction equipment etc. Diaphragm system employing SSS & AAS
  
  [Features]
  · Thermo-setting resin highly resistant to heat is used on the coil exterior (nominal diameter 50 or less).
  · Can be mounted horizontal or vertically (nominal diameter 50 or less).
  · Equipped with a water hammer sensitive mechanism.
  · Applicable in wide range of pressure from 0 to 1.0MPa.
  · Suitable for liquids and gases.
  · Triple the durability compared to conventional products (nominal diameter less than 50).
  · The threaded type WS-22 type series solenoid valve Momotaro II combines all the favorable features and same face to face dimensions of the earlier WS-12 series for replacement ease during repair while offering the added benefit of greater durability.

  Standard Price:	5,647,833 IDR-
  Days to Ship:	8 Day(s) or more

• 

  WS-22C/22CN Type Solenoid Valve (for Liquid and Gas) Momotaro II

  VENN

  Production equipment, construction equipment etc. Diaphragm type employing SSS & AAS
  
  [Features]
  · For liquid and gas.
  · Applicable under pressure ranging from 0 to 0MPa.
  · Equipped with a water hammer sensitive mechanism.
  · Can be mounted flat or upright (nominal diameter 50 or less).
  · A thermo-setting resin highly resistant to heat is used on the coil exterior (nominal diameter 50 or less)

  Standard Price:	8,875,167 IDR
  Days to Ship:	14 Day(s) or more

• 

  WS-25 Type Solenoid Valve (for Liquid and Gas) Stainless Steel Momotaro II

  VENN

  [Features]
  · Stainless steel threaded type WS-25 type series, flange type WF-25 type series solenoid valve Momotaro has the same features and face to face dimensions as the earlier WS-15 type series achieving ease of replacement during repair, with the added benefit of improved durability than the WF-15 type series.
  · Applicable in wide range of pressure from 0 to 1.0MPa.
  · Equipped with a water hammer sensitive mechanism.
  · Can be mounted horizontally or vertically.
  · Thermo-setting resin highly resistant to heat is used on the coil exterior

  Standard Price:	6,897,833 IDR
  Days to Ship:	11 Day(s) or more

• 

  PS-22C Type Solenoid Valve (for Steam, Liquid, and Air) with Strainer Momotaro II

  VENN

  Production equipment construction equipment etc. Piston system employing SSS & AAS

  Standard Price:	9,363,667 IDR
  Days to Ship:	13 Day(s) or more

• 

  PS-25 Type Solenoid Valve (for Steam, Liquids and Air) Stainless Steel Momotaro II

  VENN

  [Features]
  · The stainless steel, threaded PS-25 type series and flange type PF-25 type series, solenoid valves Momotaro II has all the favorable features and same face to face dimensions as the earlier PS-15, and PF-15 type series for ease of replacement during repair, with the added benefit of greater durability.

  Standard Price:	5,742,500 IDR
  Days to Ship:	8 Day(s) or more

• 

  PS-16 PF-16 Type Solenoid Valve (for Water) Stainless Steel Momotaro

  VENN

  [Features]
  · Applied with high pressure fluids.
  · Uses stainless steel for high pressure water and steam.

  Standard Price:	14,090,833 IDR
  Days to Ship:	16 Day(s) or more

• 

  PS-17, PF-17 Type Solenoid Valve (for Steam) Stainless Steel Momotaro

  VENN

  [Features]
  · Applied with high pressure fluids.
  · Uses stainless steel for high pressure water and steam.

  Standard Price:	14,659,167 IDR
  Days to Ship:	12 Day(s) or more

• 

  WS-18 Type Rust Proof Solenoid Valve

  VENN

  Equipped with a water hammer sensitive mechanism, the diaphragm type valve structure is suitable in water lines.
  
  [Features]
  · With a built-in straight type tube end core, the steel lined tube end face thread is cut off from fluid.
  · Incrustation and pipe threaded neck fall off is prevented (breaking from corrosion).
  · Equipped with a water hammer sensitive mechanism.
  · Applicable under pressure ranging from 0.02 to 0MPa.
  · Compact and lightweight pilot type solenoid valve

  Standard Price:	6,727,333 IDR
  Days to Ship:	12 Day(s) or more

• 

  PS-18 Type Rust Proof Solenoid Valve

  VENN

  The built-in tube end core in this solenoid valve prevent rusty water (straight type only).
  This piston system has a pilot operated valve, used for a variety of fluids including oil and exhibiting high durability.
  
  [Features]
  · With a built-in straight type tube end core, the steel lined tube end face thread is cut off from fluid.
  · Incrustation and pipe threaded neck fall off is prevented (breaking from corrosion).
  · A highly reliable and durable special piston ring is employed in the valve.
  · Applicable with pressure ranging from 0.02 to 1.0MPa.
  · Compact and lightweight pilot type solenoid valve.

  Standard Price:	9,068,167 IDR
  Days to Ship:	12 Day(s) or more

• 

  PSE-18 Type Pressure-Resistant Explosion Proof Type Solenoid Valve

  VENN

  [Features]
  · Applicable in explosive and hazardous areas.
  · Equipped with a manual override for ease in testing or actuation during power failure.
  · The direction of conduit tube threads can be changed to make installation or wiring easy.
  · Tube end core can be installed in straight type for preventing rust occurrence.
  · Used where there is danger of explosion from explosive gas.
  · Pilot operated piston system used for a variety of fluids including oil with superior durability.

  Standard Price:	21,818,167 IDR
  Days to Ship:	12 Day(s) or more

• 

  2 Port Air Operated Valve for Dust Collector VXFA2 Series

  SMC

  This is a 2 Port Air Operated Valve for Dust Collectors, VXFA2 Series.
  [Features]
  ・ It can be used in high temperature and for large diameter
  ・ It can be mounted according to piping conditions (Flange type)
  ・ Contribution to reduction of piping labor hours, because there is no need to machine orifices on the outlet side (flange body type)
  ・ Protective structure IP65 (The terminal section of the flat terminal type for lead entry is IP40.)
  · Improved armature durability
  · UL94V-0 conforming flame resistance
  ・ Built-in full-wave rectifier type (AC specifications)

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  ATEX Directive 2-Port Valve for Steam, Steam Valve 56-VND Series

  SMC

  [What is ATEX Directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the traditional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of electrostatic charge
  ・ Ignition prevention of sparks caused by friction, impact, and abrasion
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone/Category
  In ATEX, the objects to be applied are classified into categories for each dangerous place (zone).
  ・ Zone 0: Category 1
  Possibility of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
  ・ Zone 1: Category 2
  Possibility of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Possibility of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	15 Day(s) or more

• 

  Air Operated 3-Port Valve, Solenoid Valve Mounted Type, NVP11 Series

  CKD

  Air operated 3-port valve, solenoid valve mounted type, NVP11 series.
  [Features]
  ・ Universal type
  ・ Connection port size: Rc3/8 to Rc2

  CAD ：

  2D / 3D

  Standard Price:	5,330,236 IDR-
  Days to Ship:	22 Day(s) or more

• 

  ATEX Directive, Chemical Liquid Valve, Air Operated Type, Threaded Type, 55-LVA Series

  SMC

  [What is ATEX Directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the traditional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of electrostatic charge
  ・ Ignition prevention of sparks caused by friction, impact, and abrasion
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone/Category
  In ATEX, the objects to be applied are classified into categories for each dangerous place (zone).
  ・ Zone 0: Category 1
  Possibility of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
  ・ Zone 1: Category 2
  Possibility of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Possibility of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	15 Day(s)

• 

  Zero Differential Pressure Operated Pilot Type 2-Port Solenoid Valve Compatible With Rechargeable Battery 25A-VXZ Series

  SMC

  [Rechargeable battery compatible series]
  Copper (Cu) and zinc (Zn) materials are not used to reduce product defects in the rechargeable battery manufacturing process.
  Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  Electrolytic nickel plating with copper base and zinc plating are not used. (Electroless nickel plating is used. )
  It uses low dew point compatible grease, -70°C compatible, improved performance in low dew point environment.

  Days to Ship:	15 Day(s)

• 

  Pilot Type 2-Port Solenoid Valve Compatible With Rechargeable Battery 25A-VXD Series

  SMC

  [Rechargeable battery compatible series]
  Copper (Cu) and zinc (Zn) materials are not used to reduce product defects in the rechargeable battery manufacturing process.
  Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  Electrolytic nickel plating with copper base and zinc plating are not used. (Electroless nickel plating is used. )
  It uses low dew point compatible grease, -70°C compatible, improved performance in low dew point environment.

  Days to Ship:	15 Day(s)

Loading...