FRL Units（Pressure Gauge：None (Pressure Port Plug available)）

• • On Sale Till 31/12/2024

  

  Filter Regulator AW10-A To AW40-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle
  · Without corrosion. The use of a resin body ensures there is no rusting.

  	Special Price
  Days to Ship:	15 Day(s) or more

• • On Sale Till 31/12/2024

  

  Air Combination, Air Filter + Regulator + Lubricator AC20-B to AC60-B Series

  SMC

  [Features]
  ・ Improved visibility and environmental resistance
  · The transparent case guard covers the entire circumference of the case.
  · The inside can be seen from all angles (360°).
  ・ Protects the case from the external environment and improves safety
  ・ Improved workability
  ・ By integrating the element and the case, the element can be replaced at hand.
  ・ Reduction of maintenance space

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	15 Day(s) or more

• 

  Air Combination, Air Filter + Regulator AC20B-B to AC60B-B Series

  SMC

  FRL unit with improved workability
  [Features]
  ・ Improved visibility & environmental resistance
  · The transparent case guard covers the entire circumference of the case.
  ・ 360° visual confirmation is possible.
  ・ Protects the case from the external environment and improves safety
  ・ Improved workability
  ・ By integrating the element and the case, the element can be replaced at hand.
  · The amount of space required for maintenance has been reduced.
  
  [20-Series Copper/Fluorine-Free Specifications]
  ・ Suitable for use in environments that dislike copper and fluorine materials.
  ・ External dimensions are the same as standard products.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Modular type filter and regulator standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Air Combination, Air Filter + Mist Separator + Regulator, AC20C-B To AC40C-B

  SMC

  Air combination with better visibility and environmental resistance.
  [Features]
  · The bowl is completely covered by a transparent bowl guard.
  · The inside can be seen from all angles (360°).
  · The bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  · The element and bowl are combined into one unit, making it possible to replace the element by hand.
  · The amount of space required for maintenance has been reduced.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Conditioning Equipment Multi Series, Filter Regulator FR Series

  KOGANEI

  FRL unit equipped with a pressure gauge with a reset marker as standard equipment.
  [Features]
  ·Compact integration of 5 µm air filter and regulator
  ·Equipped with a pressure gauge with a preset marker as standard equipment
  ・ Low pressure and built-in check mechanism were made into series
  ·Drain cock with fitting and auto condensate type drain cock are optional items
  [Applications]
  ・ Compatible with pneumatic equipment and production lines in all industries

  Standard Price:	821,344 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Air Combination, Filter Regulator + Lubricator AC20A-B To AC60A-B Series

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Modular type FRL combination standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life.
  Choose from over 1000 in stock models, such as those with attached pressure meters, from our website.

  CAD ：

  2D

  Days to Ship:	17 Day(s) or more

• 

  Air Combination, Filter Regulator + Mist Separator AC20D-B To AC40D-B Series

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.
  · The amount of space required for maintenance has been reduced.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  FRL Combination (Modular Type Standard) C*000/C*500 Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Compact modularization: Design for each F.R.L device focused on making it more compact. Assembled dimensions are accurately calculated with a simple calculation.
  · Lightweight: The material combination allows for both strength and low weight.
  · Long life element: The elements are constructed from a unique fiber structure that is rough on the surface and becomes finer the further inward it goes (PAT.PEND). Almost no clogs. No rust concerns.
  · Space-saving embedded pressure meter: Past models had a pressure meter that stuck out of the front surface, wasting space or being at risk of striking the employees. This embedded design is both clean and an improvement to safety.
  · Prevents oil drips when reverse pressure is applied such as when residual exhaust valves release pressure.
  · Taking safety into further consideration, this device is equipped with a corrosive resistant plastic bowl.
  · Gauge plug is sealed even here a pipe plug is not installed.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Modular type WL combination standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Its elasticity and flexibility allows it to be used for piping in even tight spaces.
  · TAC duct aluminum can shrink to 1/5 of its length, and TAC duct aluminum 2 can shrink to 1/10 of its length. This allows it to be stored compactly so it does not take up much storage space.
  · Can withstand bending multiple times and is resistant to heat (up to 80°C)

  CAD ：

  2D

  Days to Ship:	19 Day(s) or more

• 

  [NEW]Filter Regulator, outdoor series, WW4000, WW8000-W Series

  CKD

  Can be used for long periods of outdoor usage, even extreme environments, due to its outer metal construction and stainless steel screw.

  Days to Ship:	20 Day(s) or more

• 

  Filter Regulator, 25A-AW20 to 60-B, 25A-AW20K to 60K-B

  SMC

  [Features]
  · In order to reduce product defects in the rechargeable battery manufacturing process, materials containing copper (Cu) and zinc (Zn) are not used.
  · No electrolytic nickel plating or zinc plating with copper base is used.
  * Electroless nickel plating is used.
  · Low dew point compatible grease used, can be used at -70°C.

  Days to Ship:	15 Day(s)

• 

  FMR Combination (Modular Type Standard) C*030/C2530 Series

  CKD

  Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Boost your system with modularization.
  · Dual element construction provides long life.

  CAD ：

  2D

  Days to Ship:	17 Day(s) or more

• 

  FR Combination (Modular Type Standard) C*020 / C2520 Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Design for each F.R.I device focused on making it more compact. Assembled dimensions are accurately calculated with a simple calculation.
  · Maintained strength from previous models and decreased weight by 50% (compared to C4000) by using a combination of materials (body is aluminum die cast, cover is resin).
  · The elements are constructed from a unique fiber structure that is rough on the surface and becomes finer the further inward it goes (PAT.PEND). Greatly reduced clogs and greatly improved product life. No rust concerns.
  · Past models had a pressure meter that stuck out of the front surface, wasting space or being at risk of striking the employees. This embedded design is both clean and an improvement to safety.
  · Prevents oil drips when reverse pressure is applied such as when residual exhaust valves release pressure.
  · Taking safety into further consideration, this device is equipped with a corrosive resistant plastic bowl.
  · Gauge plug is sealed even here a pipe plug is not installed.

  CAD ：

  2D

  Days to Ship:	19 Day(s) or more

• 

  Modular type WM combination standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Its elasticity and flexibility allows it to be used for piping in even tight spaces.
  · TAC duct aluminum can shrink to 1/5 of its length, and TAC duct aluminum 2 can shrink to 1/10 of its length. This allows it to be stored compactly so it does not take up much storage space.
  · Can withstand bending multiple times and is resistant to heat (up to 80°C)

  CAD ：

  2D

  Days to Ship:	26 Day(s) or more

• 

  Refining Equipment Multi Series FRL Combination

  KOGANEI

  The most reasonable modular type refining system. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  Standard Price:	1,618,394 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Modular type reverse filter and regulator standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Series featuring built in reverse flow feature, 5μm dust removal, and 0.3μm tar removal

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Mist Separator Regulator, Micro Mist Separator Regulator, 10/20/21-AWM, AWD

  SMC

  [Features]
  "10 Series": Clean Series
  · Suitable for cleanroom environment.
  · Prevents generation of dust in cleanrooms.
  "20-Series": Copper-free and fluorine-free specifications
  · Suitable for environments where copper and fluorine materials are undesirable.
  · External dimensions are the same as the standard model.
  "21-Series": Copper/fluorine/silicone-free + Low Dust Generation
  · Suitable for environments with restrictions on copper-, fluorine- and silicone-based materials .
  · Structure equivalent to the Clean Series (grease and packaging form differ from the Clean Series).

  Days to Ship:	15 Day(s)

• 

  Pressure Relief 3-Port Valve With Locking Holes (Double Action), 25A-VHS2510/3510/4510/5510

  SMC

  [Rechargeable battery compatible series]
  Copper (Cu) and zinc (Zn) materials are not used to reduce product defects in the rechargeable battery manufacturing process.
  Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  Electrolytic nickel plating with copper base and zinc plating are not used. (Electroless nickel plating is used. )
  It uses low dew point compatible grease, -70°C compatible, improved performance in low dew point environment.

  Days to Ship:	15 Day(s)

Loading...