Filter（Plumbing Thread Nominal：3/8）

• • On Sale Till 31/03/2025

  

  Air Filter AF10-A to AF60-A

  SMC

  An SMC air filter.
  [Features]
  · Improved usability: the element and bowl are combined into one unit, making it possible to replace the element by hand.
  · The amount of space required for maintenance has been reduced (reduction of up to 46%).
  · Improved visibility and safety
  　The bowl is completely covered by transparent bowl guard.
  　This allows for 360° monitoring while also protecting the bowl from the external environment, helping improve safety.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Mist Separator AM Series

  SMC

  The Mist Separator AM Series separates and removes oil mist.
  [Features]
  · A mist separator for removing particles such as rust and carbon with a particle size of 0.3 μm or more.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	20 Day(s) or more

• 

  Filter For Industrial Use FGD Series

  SMC

  Filter For Industrial Use FGD Series, suitable for small flow rates and low pressure filtration.
  [Features]
  · Used in multiple industries.
  · Suitable for a wide range of fluids.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• • On Sale Till 31/03/2025

  

  Mist Separator AFM20 to AFM40-A/Micro Mist Separator AFD20 to AFD40-A

  SMC

  Energy-saving Mist Separator AFM and Micro-Mist Separator AFD.
  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Air Filter 3-in-1 Multi-dry Filter for Compressed Air

  MAEDA SHELL SERVICE

  Prevents trouble and brownouts caused by compressed air contamination, and supplies super clean compressed air.
  
  [Features]
  · Has 3 elements on the same core and coaxial, dries and separates oil and moisture, removes oil particles of more than 0.01 μm and makes the compressed air super clean air in steps.
  · Has 2 pressure gages and you can visually monitor the exchange magnets of the elements.
  · Creates the same vacuum state with tornado when the pressured air passes, vaporizes the water drops due to the difference between inner and outer pressures, and makes dried air with a humidity up to about 15% (when 0.7MPa).
  · Pressure loss is 30-50% lower when compared to other oil mist filters.
  · Easy to disinfect and clean due to easy removal for exchanging all elements.
  · Discharges the drain automatically (water, oil and toxic substances from the compressed air). Almost no failures by using inner pressure.

  • STOCK

  Standard Price:	9,900,000 IDR
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Micro Mist Separator AMD Series

  SMC

  SMC Micro Mist Separator.
  [Features]
  · Can separate and remove oil particles in an aerosol state as well as any fine contaminants of 0.01 μm or more such as carbon and dust.
  · Use as a pre-filter for compressed air for use in clean rooms or precision instruments that require air with a high degree of cleanliness.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Super Mist Separator AME Series

  SMC

  Super Mist Separator AME Series; separates and adsorbs oil particles in an aerosol state.
  [Features]
  · Changes oil-lubricating compressed air to oil-free equivalent air.
  [Applications]
  · Use for filtering compressed air for use on coating lines that require a high degree of cleanliness.
  · Use for filtering compressed air for use in clean rooms and for compressed air for use in equipment with which oil must be avoided.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	20 Day(s) or more

• • On Sale Till 31/03/2025

  

  Water Separator AMG Series

  SMC

  An AMG Series small and lightweight water separator.
  [Features]
  · Removes water droplets from compressed air.
  · Removes impurities such as oil and other contaminants from compressed air.
  · Filters large dust grains and separates oil droplets.
  · Filtration of dust and separation of oil mist.
  · Removal of offensive odors from compressed air.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	20 Day(s) or more

• • On Sale Till 31/03/2025

  

  Exhaust Cleaner AMC Series

  SMC

  SMC Exhaust Cleaner AMC Series.
  [Features]
  · Reduces noise removes oil mist for a more comfortable working environment.
  · Noise reduction: 35 dB(A) or more.
  · Oil mist removal rate: over 99.9%.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  Oil Mist Filter (Modular-Type Standard) M*000 Series

  CKD

  Modular design. Removes oils and oil mist effectively.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Filter regulator (TP)

  TRUSCO NAKAYAMA

  [Features]
  ● Compact equipment with integrated air filer and regulator.
  ● Removes moisture and residual dust in the air and stabilizes the pressure.
  ● This does not auto drain.
  ● Compact and mini type.
  ● Drain discharge system: Manual (however, TP-3RTOFGB automatically drains when the pressure becomes less than 0.05MPa)
  ● Pressure gauge with bracket

  • STOCK

  Standard Price:	952,462 IDR
  Days to Ship:	Quote

• 

  Micro Mist Separator, 10-AMD Series

  SMC

  Micro Mist Separator 10-AMD Series separates and removes aerosol-state oil particles.
  [Features]
  · Modular connection possible with 10-AMD150C to 550C.
  · Removes any fine solid particles, such as carbon or dust, of more than 0.01 μm.
  [Applications]
  · Use as a pre-filter for compressed air used for precision instruments or in clean rooms that require air with a high degree of cleanliness.

  Days to Ship:	Quote

• 

  Air filter (TAF)

  TRUSCO NAKAYAMA

  [Features]
  ● Removes moisture and solid residual dust more than 5 microns in the compressed air.
  ● Drain discharge system: Manual (however, it automatically drains when the pressure becomes less than 0.05MPa)
  

  • STOCK

  Standard Price:	636,000 IDR
  Days to Ship:	1 Day(s)

• • On Sale Till 31/03/2025

  

  Main Line Filter AFF Series

  SMC

  The Main Line Filter AFF Series removes impurities such as oil, water and other contaminants.
  [Features]
  · Improves the function of down flow dryers, extends the life of precision filters and prevents trouble with equipment.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Micro Mist Separator with Pre-Filter AMH Series

  SMC

  Micro Mist Separator with Pre-Filter AMH Series; separates and removes oil particles in an aerosol state.
  [Features]
  · A micro mist separator that can remove any fine contaminants of 0.01 μm or more such as carbon and dust.
  [Applications]
  · Use as a pre-filter for compressed air for use in clean rooms or precision instruments that require air with a high degree of cleanliness.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	20 Day(s) or more

• 

  Clean Air Module (Standard / High Flow Type), LLB Series

  SMC

  Modularized (reduces piping labor hours / saves space) to allow clean air to be obtained easily.
  [Features]
  · Filtration: 0.01 μm (filtration efficiency 99.99%).
  · Fluid contact space: Grease-free, silicone-free.
  · Available in 24 variations of combinations.
  · Built-in single-action fittings.
  · Can be fitted with pressure gauge / pressure switch (separate purchase).
  · RoHS compliant.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  SFC330/SFC430-FP2 Series

  CKD

  [Features]
  · Reliable "antimicrobial" and "disinfectant" powers
  · Sterilization active value of 3 and bacteria trapping performance of LRV8 or higher.
  · Uses material compliant with the Food Sanitation Act of Japan
  · NSF H1 grease for food products used
  · Antibacterial materials used for the exterior.

  Standard Price:	4,374,619 IDR-
  Days to Ship:	26 Day(s) or more

• 

  Odor Removal Filter AMF Series

  SMC

  The Odor Removal Filter AMF Series supports modular connections.
  [Features]
  · Can save space and helps reduce the amount of piping.
  · Height reduced by up to 40% and weight reduced by up to 40%.

  CAD ：

  2D / 3D

  Days to Ship:	20 Day(s) or more

• 

  Main Line Filter Clean Series and Copper/Fluorine-Free Specifications 10-/20-AFF Series

  SMC

  [10-Series, Clean Series]
  · Supports a clean environment.
  ・ Prevents dust generation in the cleanroom.
  
  [20-Series Copper/Fluorine-Free Specifications]
  · It can be used in environments where copper and fluorine materials should be avoided.
  ・ External dimensions are the same as standard products.

  Days to Ship:	15 Day(s)

• 

  Air Filter (Modular Type, Standard) F*000 Series

  CKD

  Modular design. Long life with a double element structure. O-ring drop prevention. Filter element with integrated one-touch connection and disconnection

  CAD ：

  2D / 3D

  Days to Ship:	16 Day(s) or more

• 

  Modular type high performance oil mist filter standard white series

  CKD

  Modular design. High performance and 10 times the oil removal ability. Long life and low pressure loss.

  Days to Ship:	16 Day(s) or more

• 

  AIRX Small Filter Series (Built-In Floating Drain Trap)

  FUKUHARA

  Has a high performance filter filled with gas-liquid separation materials

  Standard Price:	3,241,829 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Air Filter BN-27T5

  NIHON SEIKI

  Space-saving modular type filter.
  [Features]
  ·Removes dust, oil and water from compressed air.
  ·Air filter with modular connection.
  ·Condensate is automatically discharged when the pressure drops below 0.05 MPa.
  [Applications]
  ·Prevents pneumatic equipment malfunctions caused by dust, oil, and water contained in compressed air.

  CAD ：

  2D

  Standard Price:	624,554 IDR
  Days to Ship:	8 Day(s) or more

• 

  [NEW]Air Filter - Outdoor series - FW4000/FW8000-W Series

  CKD

  Can be used for long periods of outdoor usage, even extreme environments, due to its outer metal construction and stainless steel screw.

  Days to Ship:	16 Day(s) or more

• 

  SFC307/SFC407-FP2 Series

  CKD

  [Features]
  · Reliable "antimicrobial" and "disinfectant" powers
  · Sterilization active value of 3 and bacteria trapping performance of LRV8 or higher.
  · Uses material compliant with the Food Sanitation Act of Japan
  · NSF H1 grease for food products used
  · Antibacterial materials used for the exterior.

  Standard Price:	10,411,923 IDR-
  Days to Ship:	21 Day(s) or more

• 

  SFC306/SFC406-FP2 Series

  CKD

  [Features]
  · Reliable "antimicrobial" and "disinfectant" powers
  · Sterilization active value of 3 and bacteria trapping performance of LRV8 or higher.
  · Uses material compliant with the Food Sanitation Act of Japan
  · NSF H1 grease for food products used
  · Antibacterial materials used for the exterior.

  Standard Price:	7,290,131 IDR-
  Days to Ship:	26 Day(s) or more

• 

  SFS10-FP2 Series

  CKD

  [Features]
  · Reliable "antimicrobial" and "disinfectant" powers
  · Sterilization active value of 3 and bacteria trapping performance of LRV8 or higher.
  · Uses material compliant with the Food Sanitation Act of Japan
  · NSF H1 grease for food products used
  · Antibacterial materials used for the exterior.

  Standard Price:	13,055,008 IDR
  Days to Ship:	18 Day(s) or more

• 

  Exhaust Cleaner For Cleanroom, AMP Series

  SMC

  Exhaust Cleaner For Cleanroom AMP Series with reassuring two-stage element construction.
  [Features]
  · Exhaust cleaner that can be used inside a cleanroom.
  · Exhaust air cleanliness: Equivalent to ISO Class 5 (Class 100 Fed.Std.209D).
  · Particles of 0.3 μm or larger are kept to 3.5 particles/L or less.

  CAD ：

  2D / 3D

  Days to Ship:	31 Day(s) or more

• 

  Clean Gas Filter: Disposable Type / Multiple Disc Type, SFC100 Series

  SMC

  Highly reliable fluoropolymer membrane clean gas filter.
  [Features]
  ·Element cannot be replaced
  ·Precision filtration of compressed air and nitrogen for semiconductor processes
  ·Filtration degree 0.01 µm (filtration efficiency 99.99%)
  ·Disposable type, multiple disc type
  ·Connection method: Rc, TSJ, URJ
  ·Nominal pipe thread size: 1/4, 3/8

  CAD ：

  2D / 3D

  Standard Price:	7,803,000 IDR-
  Days to Ship:	20 Day(s) or more

• 

  Air Filter, Clean and Low Dust Generation 10-/20-/21-AF-A Series

  SMC

  [10-Series Clean Series]
  ・ This product can be used in a clean environment.
  ・ Prevents dust generation in the cleanroom.
  
  [20-series Copper-Free/Fluorine-Free Specifications]
  ・ It can be used in environments where copper and fluorine materials should be avoided.
  ・ External dimensions are the same as standard products.
  
  [21-Series, Copper-Free / Fluorine-Free / Silicone-Free + Low Dust Generation]
  ・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials.
  ・ The structure is the same as the Clean Series (grease and packaging form differ from the Clean Series. )

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s)

• 

  Mist Separator Clean Series and Copper/Fluorine-Free Specifications 10-/20-AM Series

  SMC

  [10-Series Clean Series]
  ・ This product can be used in a clean environment.
  ・ Prevents dust generation in the cleanroom.
  
  [20-series Copper-Free/Fluorine-Free Specifications]
  ・ It can be used in environments where copper and fluorine materials should be avoided.
  ・ External dimensions are the same as standard products.

  Days to Ship:	15 Day(s) or more

• 

  Micro Mist Separator With Pre-Filter, Clean, Copper-Free / Fluorine-Free Specifications, 10/20-AMH Series

  SMC

  [10-Series Clean Series]
  ・ This product can be used in a clean environment.
  ・ Prevents dust generation in the cleanroom.
  
  [20-series Copper-Free/Fluorine-Free Specifications]
  ・ It can be used in environments where copper and fluorine materials should be avoided.
  ・ External dimensions are the same as standard products.

  Days to Ship:	15 Day(s) or more

• 

  Super Mist Separator Clean Series 10-AME Series

  SMC

  [Features]
  ・ Aerosol-like oil particles are separated and adsorbed, and the oil-lubricated compressed air is changed to oil-less air or equivalent.
  ・ Please use the product for filtration of compressed air for applications requiring highly clean air, such as painting lines, compressed air for cleanrooms, and compressed air for equipment for which contact with oils must be avoided.
  ・ The replacement time of filter elements is displayed with color change so that the replacement time can be visually checked.
  ・ Modular coupling is possible for 10-AME150C to 550C.

  Days to Ship:	15 Day(s) or more

• 

  Odor Removal Filter Clean Series 10-AMF Series

  SMC

  [Features]
  ・ Activated carbon fiber elements effectively remove odors from compressed air. It is used in areas where odors are disliked, such as for cleanrooms.
  ・ Odors of compressed air are removed and it is easy to replace and install the activated carbon fiber elements which have large adsorption areas.
  ・ Modular coupling is possible for 10-AMF150C to 550C.

  Days to Ship:	15 Day(s) or more

• 

  Main Line Filter, Rechargeable Battery Compatible, 25A-AFF Series

  SMC

  [Rechargeable battery compatible series]
  ・ In order to reduce product defects in the rechargeable battery manufacturing process, materials containing copper (Cu) and zinc (Zn) as the main components are not used.
  * Some aluminum alloys and aluminum die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  ・ Nickel electroplating and zinc plating with copper base are not used.
  * Electroless nickel plating is used.
  ・ Low dew point compatible grease is used, it can be used at -70°C. Performance improvement in low dew point environment.

  Days to Ship:	15 Day(s) or more

• 

  Mist Separator, Rechargeable Battery Compatible, 25A-AM Series

  SMC

  [Rechargeable battery compatible series]
  ・ In order to reduce product defects in the rechargeable battery manufacturing process, materials containing copper (Cu) and zinc (Zn) as the main components are not used.
  * Some aluminum alloys and aluminum die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  ・ Nickel electroplating and zinc plating with copper base are not used.
  * Electroless nickel plating is used.
  ・ Low dew point compatible grease is used, it can be used at -70°C. Performance improvement in low dew point environment.

  Days to Ship:	15 Day(s) or more

• 

  Micro Mist Separator 25A-AMD Series Compatible With Rechargeable Batteries

  SMC

  [Rechargeable battery compatible series]
  ・ In order to reduce product defects in the rechargeable battery manufacturing process, materials containing copper (Cu) and zinc (Zn) as the main components are not used.
  * Some aluminum alloys and die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  ・ Electrolytic nickel plating and zinc plating with copper base are not used.
  * Electrolytic nickel plating is used.
  ・ Low dew point compatible grease used, can be used at -70°C. Performance improvement in low dew point environment.

  Days to Ship:	15 Day(s) or more

• 

  Micro Mist Separator With Pre-Filter, Rechargeable Battery Compatible, 25A-AMH Series

  SMC

  [Rechargeable battery compatible series]
  ・ In order to reduce product defects in the rechargeable battery manufacturing process, materials containing copper (Cu) and zinc (Zn) as the main components are not used.
  * Some aluminum alloys and aluminum die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  ・ Nickel electroplating and zinc plating with copper base are not used.
  * Electroless nickel plating is used.
  ・ Low dew point compatible grease is used, it can be used at -70°C. Performance improvement in low dew point environment.

  Days to Ship:	15 Day(s)

• 

  Exhaust Cleaner for Cleanroom, Rechargeable Battery Compatible, 25A-AMP Series

  SMC

  [Rechargeable battery compatible series]
  ・ In order to reduce product defects in the rechargeable battery manufacturing process, materials containing copper (Cu) and zinc (Zn) as the main components are not used.
  * Some aluminum alloys and aluminum die-cast aluminum materials contain small amounts of copper (Cu) and zinc (Zn) as additive elements.
  ・ Nickel electroplating and zinc plating with copper base are not used.
  * Electroless nickel plating is used.
  ・ Low dew point compatible grease is used, it can be used at -70°C. Performance improvement in low dew point environment.

  Days to Ship:	15 Day(s)

• 

  Micro Mist Separator, Clean and Low Dust Generation 10-/20-/21-AFD-A Series

  SMC

  [10-Series Clean Series]
  ・ This product can be used in a clean environment.
  ・ Prevents dust generation in the cleanroom.
  
  [20-series Copper-Free/Fluorine-Free Specifications]
  ・ It can be used in environments where copper and fluorine materials should be avoided.
  ・ External dimensions are the same as standard products.
  
  [21-Series, Copper-Free / Fluorine-Free / Silicone-Free + Low Dust Generation]
  ・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials.
  ・ The structure is the same as the Clean Series (grease and packaging form differ from the Clean Series. )

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s)

• 

  Mist Separator, Clean and Low Dust Generation 10-/20-/21-AFM-A Series

  SMC

  [10-Series Clean Series]
  ・ This product can be used in a clean environment.
  ・ Prevents dust generation in the cleanroom.
  
  [20-series Copper-Free/Fluorine-Free Specifications]
  ・ It can be used in environments where copper and fluorine materials should be avoided.
  ・ External dimensions are the same as standard products.
  
  [21-Series, Copper-Free / Fluorine-Free / Silicone-Free + Low Dust Generation]
  ・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials.
  ・ The structure is the same as the Clean Series (grease and packaging form differ from the Clean Series. )

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s)

Loading...