For Sealable Type（Page2）

• 

  Waterproof Flush Lift Handle A-212

  TAKIGEN

  [Features]
  · The stopper is lifted 3 to 5 mm by storing handle.
  · You can get sealing effects.
  · This is a simple structure in which you can lift the handle with your fingers.
  · Waterproof type (using O ring and sheet packing).
  · For both left hand and right hand use

  CAD ：

  2D / 3D

  Standard Price:	426,890 IDR-
  Days to Ship:	Same day or more

• 

  Handle for Latch FA-680

  TAKIGEN

  [Features]
  · Two stage opening and closing is possible in combination with the double latch lock C-628, which is a safety feature to release hot air and steam such as with an oven.
  · In combination with the latch lock, it can be opened and closed with one touch of the upper and lower two points of tightening.
  · The large handle made of resin provides less heat conduction.
  · It is an elegant, rounded design

  CAD ：

  2D

  Standard Price:	1,131,244 IDR
  Days to Ship:	12 Day(s) or more

• 

  Lift Handle A-201

  TAKIGEN

  [Features]
  · Seal the door by pushing down on the handle.
  · When pulling up the handle, the clasp retracts, and the opening and closing operation is done by rotating the handle left and right

  CAD ：

  2D / 3D

  Standard Price:	292,732 IDR
  Days to Ship:	Same day

• 

  Lift Handle A-201-A

  TAKIGEN

  [Features]
  · Handle shape that is easy to operate, the handle tightens the door.
  · The stopper can be adjusted within the range of 8 mm (A-201-A) A-1/A-2/A-3 Each stopper is compatible and can be attached to any handle.
  · A-1 Please attach the stopper to use it.
  · The stopper can be installed in 90° increments.
  · For both left hand and right hand use.

  CAD ：

  2D / 3D

  Standard Price:	364,971 IDR-
  Days to Ship:	Same day or more

• 

  Lift handle A-202

  TAKIGEN

  [Features]
  · Seal the door by pushing down on the handle.
  · When pulling up on the handle, the clasp retracts and it can be opened and closed by rotating the handle.
  · Left and right combination

  CAD ：

  2D / 3D

  Standard Price:	205,011 IDR
  Days to Ship:	Same day

• 

  Lift handle A-203

  TAKIGEN

  [Features]
  · Seal the door by pushing down on the handle.
  · When pulling up on the handle, the clasp retracts and it can be opened and closed by rotating the handle.
  · Left and right combination

  CAD ：

  2D / 3D

  Standard Price:	140,511 IDR
  Days to Ship:	Same day

• 

  Lift Handle AP-201

  TAKIGEN

  [Features]
  · Handle shape that is easy to operate.
  · Tighten the door by pushing down on the handle.
  · The stopper can be installed in 90° increments.
  · Left and right dual use type.

  CAD ：

  2D / 3D

  Standard Price:	200,870 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Lever Handle FA-601-F-H

  TAKIGEN

  [Features]
  · Even when locked, there is a special lever handle FA-601-F-H that's operation is a safety mechanism that can be open the door(FA-601-F-H sold separately).
  · For both left hand and right hand use

  CAD ：

  2D

  Standard Price:	976,894 IDR
  Days to Ship:	58 Day(s) or more

• 

  Roller Interference Handle FA-830

  TAKIGEN

  [Features]
  · Plate for indentation (FA-830S-1-L/R) and for imposition (FA-830S-2).
  · The receiver (FA-830S-1-L/R) mounting position can be fine-tuned.
  · For left hand or right hand use

  CAD ：

  2D

  Standard Price:	627,383 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Roller Tightening Handle FA-840

  TAKIGEN

  [Features]
  · Close even a large door securely.
  · The mounting position of the plates (FA-840S-1) can be fine-tuned.
  · The opening operation is smooth with a built-in spring in the handle.
  · For right or left (they both open to the left in this figure).
  · The plate is a left-and-right type

  CAD ：

  2D / 3D

  Standard Price:	264,350 IDR-
  Days to Ship:	Same day or more

• 

  Lock Handle FA-630

  TAKIGEN

  [Features]
  · The rod moves up and down 23 mm vertically and closes the door firmly.
  · You can identify whether it is locked (green) or unlocked (red).
  · The direction of handle operation has been clarified with arrows.
  · The rod mounting position can be adjusted.
  · For right rotation or for left rotation (the photograph in this figure shows right rotation)

  CAD ：

  2D

  Standard Price:	1,438,248 IDR
  Days to Ship:	Same day

• 

  Handle with Lock for Sealing FA-926

  TAKIGEN

  [Features]
  · It is a handle with a locking mechanism that will not open from vibration, shock, etc.
  · Key pin of ø6 is attached.
  · Heads of padlocks (C-555) Can be used together.
  · Rigid structure

  CAD ：

  2D

  Standard Price:	1,054,183 IDR
  Days to Ship:	12 Day(s) or more

• 

  Handle with Lock for Sealing FA-927

  TAKIGEN

  [Features]
  · It is a handle with a locking mechanism that does not open from vibration, impact, etc.
  · Can be used together with Key pin and padlock, Chief padlock (C-555).
  · Rigid structure

  CAD ：

  2D

  Standard Price:	661,016 IDR
  Days to Ship:	8 Day(s) or more

• 

  One-Touch Corner Handle FA-935

  TAKIGEN

  [Features]
  · When you pull the button, the lock is released and you can open it.
  · The plates position is adjustable during installation and the tightening margin can be adjusted

  CAD ：

  2D / 3D

  Standard Price:	1,053,175 IDR
  Days to Ship:	12 Day(s) or more

• 

  Safety Collar Handle for Antibacterial Sealing FA-662

  TAKIGEN

  [Features]
  · Prevents growth of bacteria and mold.
  · Sustains the antimicrobial effect semipermanently.
  · Safety handle for sealing FA-602 compatible.
  · Fully designed with a cosmetic cover· It has a safety mechanism where it can be opened through operation of FC-701/FC-702) even if it is locked with a padlock.
  · Can be locked with a key pin (FA-662-P) and padlock(C-555-30/35).
  · For both left hand and right hand use

  CAD ：

  2D / 3D

  Standard Price:	214,229 IDR-
  Days to Ship:	Same day or more

• 

  Small Cremone Lock A-363

  TAKIGEN

  [Features]
  · Low cost extended bolt lock.
  · Since they are front faced, installation and maintenance are easy.
  · Waterproof for right/left

  CAD ：

  2D / 3D

  Standard Price:	649,042 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Striker Plate for Small Handle FA-727S

  TAKIGEN

  The height can be adjusted with the plate screws.

  CAD ：

  2D / 3D

  Standard Price:	186,297 IDR-
  Days to Ship:	Same day

• 

  Handle for Large Type Tight Sealing FA-625

  TAKIGEN

  [Features]
  · It has a newly designed large-sized sealing handle.
  · Strong sealing can be achieved.
  · The key can be inserted and removed when locking and unlocking.
  · Employs a sliding cap.
  · Cap operation is smooth

  CAD ：

  2D

  Standard Price:	888,055 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Large Surface Mounted Lock Handle, A-388N

  TAKIGEN

  [Features]
  · Please apply high-performance lubricant C-985 to ensure long-term use.
  · We recommend the application of a "Loosening prevention agent" on the screws for the stopper plate of this product in order to prevent looseness.
  · Please be aware that rotating the key more than necessary may damage the lock/key tip

  CAD ：

  2D

  Standard Price:	2,038,194 IDR
  Days to Ship:	8 Day(s) or more

• 

  Canopy Type Handle for Airtightness, FA-908

  TAKIGEN

  [Features]
  · It is the best front facing handles for canopy type sealing doors.
  · A high Security lock TAK70 is standard equipment.
  · You can also rearrange it into TAK60/TAK80.
  · Extruded material is used for the grip part, and elongated items can also be produced (standard is 230 mm)

  CAD ：

  2D

  Standard Price:	1,902,995 IDR
  Days to Ship:	12 Day(s) or more

• 

  Two Step Corner Handle, FA-635

  TAKIGEN

  [Features]
  · Once the lever is pulled, the door opens about 12 mm and then fully opens by pulling the lever again.
  · It is ideal for when you need to escape steam.
  · Heat resistant type with vinyl coating on the hand grip (up to 100° C).
  · It is possible to finely adjust the mounting position.
  · For both left hand and right hand use

  CAD ：

  2D

  Standard Price:	1,922,374 IDR
  Days to Ship:	12 Day(s) or more

• 

  Strike Plate with Emergency Release Device, FA-702S-4

  TAKIGEN

  [Features]
  · A double safety escape mechanism that adopts a safety device, not only for the handle, but also for the plate to prevent trapping accidents.
  · When you push the internal safety push rod strongly in case of emergency, the plate separates from the latch and the door opens when you push on it

  CAD ：

  2D

  Standard Price:	1,053,175 IDR
  Days to Ship:	8 Day(s) or more

• 

  Plane Lift Handle A-204

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · (A-1204).
  · Tighten the door by pushing down on the handle.
  · When pulling up the handle, the clasp retracts about 3 mm, and it can be opened and closed using the handle.
  · Left and right dual use type.
  · Improved waterproofness. (Packing used in and outside)

  CAD ：

  2D / 3D

  Standard Price:	282,411 IDR-
  Days to Ship:	Same day or more

• 

  Plane Lift Handle A-205

  TAKIGEN

  [Features]
  · Seal the door by pushing down on the handle.
  · When pulling up the handle, the clasp retracts about 3 mm, and it can be opened and closed using the handle.
  · Left and right dual use type.
  · Improved waterproofness. (Packing used in and outside)

  CAD ：

  2D / 3D

  Standard Price:	282,411 IDR-
  Days to Ship:	Same day

• 

  Flat Lift Handle A-214

  TAKIGEN

  [Features]
  · Seal the door by pushing down on the handle.
  · When pulling up the handle, the clasp retracts about 3 mm, and it can be opened and closed using the handle.
  · Left and right dual use type.
  · Improved waterproofing (used for packing inside and outside)

  Standard Price:	684,890 IDR
  Days to Ship:	11 Day(s) or more

• 

  Latch Receiver for Airtight Lift Handle FA-681-S

  TAKIGEN

  [Features]
  · FA-681-1 / FA-681-T-1 You can close it with a single touch by using it in combination with a handle.
  · FA-681-S-1 is an indented type.
  · The latch is inconspicuous, and adjustment of up to 6 mm is possible.
  · FA-681-S-2 is a front facing type.
  · Easy installation and maintenance, adjustment of up to 10 mm is possible

  CAD ：

  2D

  Standard Price:	359,493 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Airtight, Folding, Flat Handle, A-213N

  TAKIGEN

  [Features]
  · The stopper is lifted 3 mm by storing the handle.
  · A strong shielding effect is achieved.
  · The flat folding handle is compatible with the new A-213 design where the key slot is at the center.
  · Safety structure that does not open the closed door, even when a violent vibration / shock is applied.
  · Left and right combination

  CAD ：

  2D / 3D

  Standard Price:	757,129 IDR
  Days to Ship:	Same day

• 

  Seal Type Adjustable Handle A-309

  TAKIGEN

  [Features]
  · Flat design without protrusions.
  · One touch open with push button.
  · The airtightness of the door can be finely adjusted with the adjusting screw.
  · Waterproof type (O ring, packing is used).
  · Lockable with reversible key with dust proof shutter

  CAD ：

  2D / 3D

  Standard Price:	524,145 IDR-
  Days to Ship:	Same day or more

• 

  Airtight Cover Lock A-838

  TAKIGEN

  [Features]
  · Increases the shielding ability of the hook part, and minimizes sound leakage.
  · Flat type with few protrusions from the door surface.
  · You can tighten three points in combination with the interlocking unit.
  · A lock with a dust-proof shutter comes standard.
  · You can use it as an alternative to A-858 which is a cover lock for construction machine that is a product discontinued in the catalog

  CAD ：

  2D / 3D

  Standard Price:	141,989 IDR-
  Days to Ship:	Same day or more

• 

  Airtight, Small, Cover Lock A-839

  TAKIGEN

  [Features]
  · Improved the shielding property of the hook.
  · Keeps sound leakage to a minimum.
  · Flat type with few protrusions from the door surface.
  · Dust proof shutter lock included as standard

  CAD ：

  2D / 3D

  Standard Price:	430,949 IDR
  Days to Ship:	12 Day(s) or more

• 

  Corner Handle for Sealing FA-611

  TAKIGEN

  [Features]
  · It is a side-mounted type sealed handle.
  · The semicircular claw meshes with the roller seat to draw-in and tightly close the door.
  · the roller seat can be adjusted 2 mm forward and backward from the reference position for tightening.
  · In addition to the included key, it is possible to lock with a padlock (recommended padlock C-551).
  · Left and right combination

  CAD ：

  2D / 3D

  Standard Price:	152,310 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Corner Handle for Sealing FA-614

  TAKIGEN

  [Features]
  · It is the most common, economic type.
  · The mounting position and tightening margin of the plate can be finely adjusted.
  · Can be used in high temperatures such as with an oven.
  · Left and right combination

  CAD ：

  2D

  Standard Price:	919,015 IDR
  Days to Ship:	Same day

• 

  Corner Handle for Sealing, FA-615

  TAKIGEN

  [Features]
  · Heat-resistant type (up to 100°C) with a vinyl coating on the hand grip.
  · Can be used in high temperatures, such as with an oven

  CAD ：

  2D / 3D

  Standard Price:	1,359,746 IDR-
  Days to Ship:	Same day or more

• 

  Corner Handle For Airtight Doors FA-618

  TAKIGEN

  Lockable with padlock. Tightening margin adjustment is possible for the plate. Left and right dual use type.

  CAD ：

  2D

  Standard Price:	888,055 IDR
  Days to Ship:	Same day

• 

  Corner Handle for Sealing FA-620

  TAKIGEN

  [Features]
  ·A padlock (C-555) can also be used.
  · Tightening margin adjustment is possible for the plate.
  · Left/Right combination type.
  [Applications]
  ·For medium-sized, lightweight and large doors for kitchen equipment, medical equipment, testing machines, etc.

  CAD ：

  2D

  Standard Price:	1,050,147 IDR
  Days to Ship:	Same day

• 

  Corner Handle for Sealing, FA-901

  TAKIGEN

  [Features]
  · Plate adjustment is possible

  CAD ：

  2D

  Standard Price:	668,193 IDR-
  Days to Ship:	Same day or more

• 

  Antibacterial Striker Plate for Airtight Safety Color Handle FA-662S

  TAKIGEN

  [Features]
  · Prevents growth of bacteria and mold.
  · Sustains the antimicrobial effect semipermanently.
  · The installation is FA-602 plate is compatible with FA-602S.
  · Refreshed design with cosmetic cover.
  · Since the mounting screws are hidden, the crime prevention is improved.
  · The meshing position can be adjusted back and forth by 3 mm using the long hole.
  · Loosen the screw of the plate and slide it to adjust the offset height.
  · An emergency escape device is attached to prevent accidents of being trapped inside.
  · When mounting the emergency escape device, use mounting part A and mounting part B, you can install it in two ways

  CAD ：

  2D / 3D

  Standard Price:	369,030 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Safety Handle for Sealing, FA-601

  TAKIGEN

  [Features]
  · There is a safety mechanism that can be opened by engaging the internal safety push rod from the inside of the cabinet, even when locked by a padlock.
  · The main body and the plate are screwed from the inside of the door as a crime prevention design.
  · The Key pin and padlock (C-555), Chief padlock (C-555) can be used together.
  · Left and right combination

  CAD ：

  2D / 3D

  Standard Price:	2,907,743 IDR
  Days to Ship:	8 Day(s) or more

• 

  Safety Handle for Sealing, FA-601-F

  TAKIGEN

  [Features]
  · Even when locked, there is a special lever handle FA-601-F-H that's operation is a safety mechanism that can be open the door(FA-601-F-H sold separately).
  · For both left hand and right hand use

  CAD ：

  2D

  Standard Price:	2,906,386 IDR
  Days to Ship:	12 Day(s) or more

• 

  Safety Handle for Sealing, FA-603

  TAKIGEN

  [Features]
  · Even when locked, there is an inner compartment safety push bar inside the cabinet which can be opened with the operation of a safety mechanism (FC-700/FC-701/FC-702).
  · The main body and the plate are screwed from the inside of the door as a crime prevention design.
  · For both left hand and right hand use

  CAD ：

  2D / 3D

  Standard Price:	1,135,735 IDR
  Days to Ship:	Same day

• 

  Safety Handle for Sealing, FA-772

  TAKIGEN

  [Features]
  · Prevents growth of bacteria and mold.
  · We focused on hygiene and ease of cleaning.
  · Even in the case of locking with padlocks, there is a safety push bar inside the cabinet which is a safety mechanism (FC-700/FC-701/FC-702). that can open the door by pushing.
  · Because the mounting hole is long, you can adjust the engagement with the plate (about 3 mm in front and back).
  · Since the mounting screws are hidden with a cap, it has a good appearance.
  · Compatible with an installable safety handle FA-602/FA-662 for when the door is closed.
  · You can even lock it with a long shackle padlock.
  · Left and right dual use type.

  CAD ：

  2D

  Standard Price:	846,776 IDR
  Days to Ship:	Same day

• 

  Strike Plate FA-602S-7 Safety Handle for Sealing, FA-602

  TAKIGEN

  [Features]
  · Jet cooler can be installed anywhere.
  · The level of connectivity of the latch can be adjusted 4 mm back and forth.
  · Equipped with safety escape mechanism to prevent trapping accidents and a Safety knob FC-708 for safety that should be used in together.
  · Installation is compatible with FA-602S-6.
  · The offset adjustment range is 40 to 70 mm

  CAD ：

  2D / 3D

  Standard Price:	492,869 IDR
  Days to Ship:	12 Day(s) or more

• 

  Strike Plate FA-603S Safety Handle for Sealing, FA-603

  TAKIGEN

  [Features]
  · Loosen the screw of the plate and slide it to adjust the offset height.
  · The part which contacts the latch is with a roller that rotates smoothly

  CAD ：

  2D

  Standard Price:	330,777 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Strike Plate FA-603S-P Safety Handle for Sealing, FA-603

  TAKIGEN

  [Features]
  · Compared to conventional resin rollers, this connects with the main latch on many points, which prevents latch disengagement due to pressure changes inside the cabinet.
  · Screws can be installed from the inside of the cabinet for anti-theft purposes
  · You can adjust the offset height

  CAD ：

  2D

  Standard Price:	292,008 IDR-
  Days to Ship:	Same day or more

• 

  Strike Plate FA-772S for Safety Handle for Sealing FA-772

  TAKIGEN

  [Features]
  · Prevents growth of bacteria and mold.
  · We focused on hygiene and ease of cleaning.
  · A safety escape mechanism is provided to prevent accidents by being trapped inside.
  · Because the mounting hole is long, you can adjust the engagement with the plate.
  · You can adjust the engagement with the handle.
  · FA-772S-1 is compatible for mounting with FA-602S-5

  CAD ：

  2D

  Standard Price:	234,869 IDR-
  Days to Ship:	12 Day(s) or more

Loading...