Conveyer Rollers

• 

  Motor Rollers-Built in Motor

  MISUMI

  Unlike regular rollers, this conveyor roller has a built-in motor and reducer. Since there is no need to provide a separate motor space, it helps save space in automatic conveyance equipment.

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Conveyor Rollers - Shaft & Roller Sets

  MISUMI

  This is a set of conveyor rollers and shafts. The pipe shaft and pins required for installation are included as a set, reducing the hassle of arranging parts.
  The conveyor rollers, pipe shafts, and pins are all made of steel, and the surface treatment is trivalent chromate.
  For roller strength, please refer to the specification table.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	141,517 IDR-
  Days to Ship:	Same day or more

• 

  Steel Roller (Conveyor Roller) M Series (R-3812PD)

  MAKITECH

  R-3812P with adjustable roller width. The width can be specified in 1 mm increments from 100 to 1000 mm. Roller unit of the R-3812PD roller conveyor.
  
  [Features]
  · The roller diameter is φ38.1. The minimum roller interval is P50.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Can be manufactured in desired size.
  · Pressed-in bearing, inexpensive type.
  · Model 60 frame standard type

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  MDR Brushless Standard Motor PM500FE

  ITOUDENKI

  Pipe diameter ⌀50 roller.
  [Features]
  ·Energy saving power consumption 60+α.
  ·Run-on-demand transport that drives only the parts that are needed when needed reduces power consumption by up to 60% compared to the drive method that uses a single external AC motor.
  ·Achieves high torque and high speed transfer.
  ·Creating a safe and comfortable space. The power supply is a 24 V DC safe low-voltage power supply that does not pose a risk of electric shock.
  ·Excellent controllability (speed control, stopping accuracy, constant speed transport).
  ·Achieved programless operation without PLC.
  ·connection with network systems.
  ·Significant reduction in total cost. Reduce power consumption with energy-saving transportation and airless.

  Standard Price:	3,610,118 IDR-
  Days to Ship:	19 Day(s) or more

• 

  Miniature Rollers for Conveyors

  MISUMI

  Conveyor roller with bearing. You can choose from two types of material: steel or stainless steel.
  For steel type, surface treatment can be selected from trivalent chromate or hard chrome plating.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	93,707 IDR-
  Days to Ship:	9 Day(s) or more

• 

  AC Light-Duty Roller ø38

  ITOUDENKI

  [Features]·ø38 roller for light duties. ·Thickness is t1.2.

  Standard Price:	2,449,122 IDR-
  Days to Ship:	11 Day(s) or more

• 

  AC Medium/Heavy-Duty Roller ø57

  ITOUDENKI

  [Features]·ø57 roller for medium and heavy duties. ·Thickness is t1.5.

  Standard Price:	2,603,922 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Conveyor Roller Shafts

  MISUMI

  conveyor roller shaft that is compatible with MISUMI's conveyor rollers and conveyor mini rollers. (Excluding HROB and HROBU.)
  
  [Type] Roller shaft
  [Material] Steel (equivalent to S45C), stainless steel (SUS304)
  [Surface treatment] Steel: No surface treatment, 4 Iron trioxide film/electroless nickel plating
  [Shaft end shape] Available in 4 types, and length can be specified in 1 mm increments from 60 to 550.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Motor Roller, Accumulator Type, Diameter ⌀57 × Width 240 - 990 (PAS Type)

  OKURA

  Can be held for long periods while still energized. Transport distance and roller width can be specified within the range of 240 – 990 mm.
  
  [Features]
  • With a built-in high impedance, low-current motor and inhibition of lock (holding) current to levels comparable to a PWS no-load current, this product is optimal for accumulator lines which are held for a long period of time while energized.

  Standard Price:	3,346,546 IDR
  Days to Ship:	17 Day(s) or more

• 

  MDR, DC Brushless Standard Motor ø48.6

  ITOUDENKI

  [Features]·Pipe diameter is ø48.6 roller. ·Thickness is t1.4.

  Standard Price:	3,145,721 IDR-
  Days to Ship:	19 Day(s) or more

• 

  MDR, DC Brushless Standard Motor ø57

  ITOUDENKI

  Roller with a pipe diameter of ø57.
  [Features]
  · Energy-saving on power consumption of up to 60%.
  · Run-on-demand transport drives only the necessary parts of the line when needed, reducing electrical energy consumption by up to 60% compared to the drive system of a single externally installed AC motor. Moreover, thanks to its airless effect, you can expect energy savings.
  · Achieves high torque and high-speed transportation.
  · Creates a safe and comfortable space. The 24 V DC power supply is a safe low-voltage power supply which means there is no danger from electrocution accidents.
  · Excellent control (speed control, stopping accuracy and fixed speed transportation).
  · Achieves a non-program environment without needing PLC.
  · Connects to network systems.
  · Drastically reduces total costs. Reduces power consumption by using energy saving transportation and airlessness.

  Standard Price:	3,455,320 IDR-
  Days to Ship:	22 Day(s) or more

• 

  MDR Brushless Standard Motor PM605FE

  ITOUDENKI

  [Features]·Pipe diameter ø60.5 roller. ·Thickness is t3.2.

  Standard Price:	3,764,919 IDR-
  Days to Ship:	22 Day(s) or more

• 

  Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀76.3 × Width 150 - 1190 (NHR Type)

  OKURA

  Roller diameter ⌀76.3 is the largest for steel rollers. For heavy objects measured in units of tons. Transport distance and roller width can be specified within the range of 150 - 1190 mm.

  Standard Price:	568,936 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Spiral Return Roller

  JAPAN ROLLER

  Symmetrical spiral shape roller surface has the function of scraping off the "adherence" of the transported material that causes belt meandering and unevenness while rotating. It is recommended to install it in the area where you want to promote ore fall within the conveyor system.

  Standard Price:	3,872,221 IDR
  Days to Ship:	20 Day(s) or more

• 

  Conveyor Rollers-Plastic

  MISUMI

  This is a resin type conveyor roller. The material of the roller is polyacetal.
  You can specify the total length in 1mm increments up to a maximum of 513mm.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  CAD ：

  2D / 3D

  Days to Ship:	18 Day(s) or more

• 

  Roller with Axel (Steel)

  TRUSCO NAKAYAMA

  [Features]
  ● This is a roller that can be installed as a roller replacement for conveyors of different manufacturers by adjusting the included collar.
  The 38 mm roller is for light loads, 57 mm for moderate loads, and 60.5 mm for moderate loads.

  • STOCK

  Standard Price:	170,923 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Roller with Shaft (Stainless Steel)

  TRUSCO NAKAYAMA

  [Features]
  - This is a roller that can be installed as a roller replacement for conveyors of different manufacturers by adjusting the included collar.
  The 38 mm roller is for light loads and 60.5 mm for moderate loads, all-stainless steel rollers. Water and chemical resistant.

  Standard Price:	721,600 IDR-
  Days to Ship:	Quote

• 

  Chain Drive Roller

  TAIYO KOGYO

  Features
  • Generic roller size used in chain drive rollers.
  
  Applications
  • For the production of drive conveyors.
  • For replacement of existing drive rollers.

  Standard Price:	920,000 IDR-
  Days to Ship:	Quote

• 

  Steel roller (conveyor roller) M Series (R-5714PD) diameter φ 57.2 x width 100-1000

  MAKITECH

  R-5714P with adjustable roller width. The widths can be specified in 1 mm increments from 100 to 1000 mm. Roller unit of the R-5714PD roller conveyor.
  
  [Features]
  · The roller diameter is φ57.2. The minimum roller interval is P75.
  · Standard roller width (nominal) is 100W to 1000W in 50mm increments.
  · Can be manufactured to desired size.
  · Pressed-in bearing and inexpensive type.
  · Model 90 frame standard type

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel roller (roller for conveyor) M Series (R-7642N) diameter φ 76.3 x width 100-1000

  MAKITECH

  A heavy-duty/economical type ⌀ 76-mm/t=4.2 mm/shaft ⌀ 20-mm black coating processed steel roller. A single roller unit for the R-7642N roller conveyor. The widths of the roller can be specified in 1-mm increments from 100–1000 mm.
  
  [Features]
  · The roller diameter is ⌀ 76.3 mm. The wall thickness t=4.2 mm. The minimum roller interval is P100.
  · The standard roller width (nominal) is 100–1000 mm in increments of 50 mm.
  · This roller can also be manufactured in non-standard sizes.
  · Machined, high-quality bearings.
  · A type 90 frame standard roller.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  MDR Brushless Motor Pulley, PM320HS Series

  ITOUDENKI

  A pulley for use with driven belt conveyors

  Standard Price:	2,990,921 IDR-
  Days to Ship:	22 Day(s) or more

• 

  Return Roller R Type

  JAPAN ROLLER

  One of the most widely used JIS standard steel tube roller. Roller that supports the belt on the return side.

  Standard Price:	1,246,944 IDR-
  Days to Ship:	14 Day(s) or more

• 

  [Clean & Pack]Conveyor Roller Shafts

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  

  Conveyor roller shaft applicable to MISUMI Conveyor Rollers and Miniature Conveyor Rollers. (Excluding HROB and HROBU.)
  
  [Type]Roller Shaft
  [Shaft End Shape]Selectable from 4 types and configurable length from 60 to 550 in 1 mm increments
  
  Click here for Snap Pin page
  Click here for rollers of Shaft & Roller Sets

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s) or more

• 

  Free Roller for Light Loads (30 kg or Less)

  ITOUDENKI

  [Features]·For light duties (30 kg or less). [Materials]·STKM.

  Standard Price:	865,007 IDR-
  Days to Ship:	16 Day(s) or more

• 

  Single Unit Steel Tapered Roller (Roller for Conveyor), Diameter ⌀57 (R900) × Width 305 - 790 (TTR Type)

  OKURA

  Durable type dedicated tapered roller for curves. The inside frame radius is 900 mm. Transport distance and roller width can be specified within the range of 305-790 mm.

  Standard Price:	1,070,769 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Steel Roller, M Series (R-3812P) Diameter φ38.1 × Width 100 - 1000

  MAKITECH

  Bestselling R-3812P individual roller, offering the most versatility in its class. Widths can be specified in 50 mm increments from 100 to 1, 000 mm.
  
  [Features]
  • Roller diameter is φ38.1. Minimum roller spacing is P50.
  • Standard roller width (nominal) is 100W to 1, 000W at intervals of 50mm.
  • Most versatile type for transporting medium light loads and heavy loads.
  • Pressed-in bearing, inexpensive type, and φ38 is a big seller.
  • Model 60 frame standard type

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Steel Roller Conveyor, M Series (R-6023P), Diameter φ 60.5 × Width 100 - 1000

  MAKITECH

  Medium load φ 60 steel roller. Roller unit of the R-6023P roller conveyor. The widths can be specified in 50 mm increments from 100 to 1, 000 mm.
  
  [Features]
  · The roller diameter is 60.5 mm. The thickness is T2.3. The minimum roller interval is P75.
  · The standard of the roller width (nominal) is 100 to 1, 000 mm at intervals of 50 mm.
  · Pressed-in bearing; inexpensive type.
  · Model 90 frame standard type.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel Roller, M Series (R-7638N), Diameter φ 76.3 × Width 100 - 1000

  MAKITECH

  Heavy-duty φ 76 steel roller. Galvanized roller surface. Roller unit of the R-7638N roller conveyor. The widths can be specified in 1 mm increments from 100 to 1, 000 mm.
  
  [Features]
  · The roller diameter is 76.3 mm with a thickness of T3.8, with pipe plating; minimum roller interval: P100.
  · The standard roller width (nominal) is 100 to 1, 000 mm at intervals of 50 mm.
  · Configurable size is available.
  · Machined bearings: High quality.
  · 90 type frame, standard type.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  AC Roller for Medium and Light Loads, ø48.6

  ITOUDENKI

  [Features]·ø48.6 roller for medium and light duties. ·Thickness is t1.4.

  Standard Price:	2,913,521 IDR
  Days to Ship:	67 Day(s) or more

• 

  AC Taper Roller, PMT Series

  ITOUDENKI

  Tapered, Small Diameter, ø42.7 Inner Roller Radius, 900-mm Line

  Standard Price:	4,647,277 IDR
  Days to Ship:	71 Day(s) or more

• 

  V Pulley Interlocking Roller

  TAIYO KOGYO

  Features
  • Can be equipped as a V pulley interlocking auxiliary roller for various motor roller makers by adjusting the included collar.
  • 57-mm moderate load roller.
  
  Applications
  • Used as motor roller V-pulley type interlocking auxiliary roller.

  Standard Price:	926,154 IDR-
  Days to Ship:	Quote

• 

  Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀18.1 × Width 100 - 500 (EAR Type)

  OKURA

  Optimal for small item transport. Transport distance and roller width can be specified within the range of 100 - 500 mm.

  Standard Price:	205,026 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Steel Roller Curve Conveyor, Diameter ø42.7 (R1200) × Width 790-1190 (HTR Type)

  OKURA

  [Features]
  · Wide-type tapered roller. Frame inner radius is 1200 mm. Conveyor length and roller width can be specified within the range of 790 to 1190 mm.

  Standard Price:	2,111,172 IDR-
  Days to Ship:	26 Day(s) or more

• 

  Steel Roller Unit (Conveyor Roller), Diameter ø38 × Width 90-690 (QR Model)

  OKURA

  Stronger version of type FR. Transport distance and roller width can be specified within the range of 90 - 690 mm.

  Standard Price:	176,461 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Steel Roller Unit (Conveyor Roller), Diameter ø60.5 × Width 90-990 (MR Model)

  OKURA

  Heavy duty steel roller. Transport distance and roller width can be specified within the range of 90 - 990 mm.

  Standard Price:	242,887 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀30 × Width 90 - 390 (KBR Type)

  OKURA

  ⌀30 resin roller for light loads. Transport distance and roller width can be specified within the range of 90 - 390 mm.

  Standard Price:	344,640 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Aluminum Roller (Roller For Conveyor), M Series (RA-5716) Diameter φ57.1 × Width 100 - 800

  MAKITECH

  φ57 aluminum roller for light loads. Roller strength is higher than the RA-4515. Roller unit of the RA-5716 roller conveyor.
  
  [Features]
  • Roller diameter is φ57.1. Minimum roller spacing is P75.
  • Standard roller width (nominal) is 100W to 800W at intervals of 50mm.
  • Pressed-in bearing and inexpensive type

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel Roller Conveyor M Series RH-3812P/Drop Frame

  MAKITECH

  φ38 steel roller / drop-in frame for moderate to light loads makes roller replacement easy. Roller unit of the RH-3812P roller conveyor.
  
  [Features]
  · The roller diameter is φ38.1. The minimum roller interval is P50.
  · The standard roller width (nominal) is 100W to 1, 000W at intervals of 50mm.
  · Most versatile type for transporting medium light loads and heavy loads.
  · Pressed-in bearing and inexpensive type.
  · Model 90 drop frame type

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel roller (conveyor roller) S Series (S-6038N) diameter φ 60.5 x width 90-990

  MAKITECH

  Heavy duty φ60 · Thickness t3.8 · Shaft diameter φ16 steel roller. The roller surface has been galvanized. Roller unit of the S-6038N roller conveyor.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Steel Roller (Conveyor Roller), S Series (Standard Bearing), Diameter φ 38.1 x width 90 - 690

  MAKITECH

  [Features]
  - φ38 t2.3 thick roller which employs a standard bearing and boss integration for quiet operation and high durability.
  · S-3823NB is a roller component of the roller conveyor.

  CAD ：

  2D

  Days to Ship:	17 Day(s) or more

• 

  Steel roller conveyor S series (S-5721NB, standard bearing)

  MAKITECH

  [Features]
  - φ38 t2.1 thick improved shock-resistant roller which employs a standard bearing and boss integration for quiet operation and high durability.
  · S-5721NB is a roller component of the roller conveyor.

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Steel Roller (Roller for Conveyor), S Series (S-3812P) Diameter φ 38.1 × Width 90 - 690

  MAKITECH

  Highly versatile cost effective type φ38 steel roller for use with moderate and light loads. Roller unit of the S-3812P roller conveyor.
  
  [Features]
  · The roller diameter is φ38.1. The minimum roller interval is P50.
  · Standard roller width (nominal) is of 90W to 690W.
  · Custom sizes (intermediate size) not available.
  · Pressed-in bearing and inexpensive type.
  · Model 60 frames

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  Roller Single Unit FMC57R With Shaft for Medium Loads, Roller Conveyor

  MEIKIKOU

  ø57 steel rollers and steel frames. Highly versatile standard type.

  Standard Price:	258,277 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Carrier Roller

  JAPAN ROLLER

  · Roller for supporting the carrier side conveyor belt

  Standard Price:	833,056 IDR
  Days to Ship:	16 Day(s) or more

• 

  Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀42 × Width 240 - 490 (AR Type)

  OKURA

  Light and clean. Transport distance and roller width can be specified within the range of 240 - 490 mm.

  Standard Price:	268,240 IDR-
  Days to Ship:	12 Day(s) or more

Loading...