Stepping Motors（Drive Method：Unipolar）

• 

  New 5th Phase Stepper Motor Unit RKII Series

  ORIENTAL MOTOR

  Unimaginable high performance of stepper motors so far. The driver uses full digital control to maximize the performance of the motor. A motor with unprecedented high efficiency, low heat generation and low vibration. Space-saving, easy wiring, and improved ease of use such as of protection function.

  Standard Price:	15,656,078 IDR-
  Days to Ship:	41 Day(s) or more

• 

  High Torque 2-Phase Stepping Motor, Standard type, PKP Series

  ORIENTAL MOTOR

  [Features]
  ・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available
  ・ Please choose the ideal motor according to your design scene
  ・ By using a motor with a high torque design, the manufacturer has achieved a torque increase of 1.2 to 1.7 times (maximum excitation static torque) compared to the standard type PK series of the same size

  Standard Price:	751,529 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Stepper Motor for Units

  ORIENTAL MOTOR

  This is an individual motor (component) of the stepper motor unit.

  Standard Price:	1,416,010 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Stepper Motor, CRK Series

  ORIENTAL MOTOR

  The CRK Series built-in positioning function type is a microstepping-driven DC input 5-phase stepper motor unit with a built-in positioning function in a compact driver.
  [Features]
  ・ Lineup of products with encoders (CRK only)
  ・ A high torque, low vibration stepper motor with a basic step angle of 0.72 (500 divisions per rotation) (PK only)
  ・ High-precision positioning can be achieved with low vibration and low noise (A separate driver is required to drive) (PK only)

  Standard Price:	13,907,561 IDR-
  Days to Ship:	41 Day(s) or more

• 

  Stepper Motor, PK Series

  ORIENTAL MOTOR

  Oriental Motor, stepper motor PK Series.

  Standard Price:	819,592 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Stepper Motor, UPKW Series

  ORIENTAL MOTOR

  - Stepping Motor, UPKW Series from ORIENTAL MOTOR.
  - Compact Drivers, The UPK•W series drivers are only 5.31 inch (135mm) high and therefore, keep the installation area small. They also come with a built-in mounting bracket for easy installation.
  - The UPK•W series does more than provide higher torque. It is also designed so that the motor produces less vibration, and a new driver has been developed to include a vibration control circuit to dramatically reduce vibration in the mid-speed range (1-5kHz).
  

  Standard Price:	1,424,268 IDR-
  Days to Ship:	20 Day(s) or more

• 

  High Torque 2-Phase Stepping Motor, SH Geared Type, PKP Series

  ORIENTAL MOTOR

  [Features]
  ・ New high torque 2-phase stepper motor PKP Series
  ・ In addition to increasing the torque of the motor, a wide range of motor current specifications are available
  ・ Please choose the ideal motor according to your design scene
  ・ A geared type effective for deceleration, torque increase, resolution increase, and vibration countermeasures
  ・ Backlash is smaller than conventional products. Also, wider speed range and easier to use

  Standard Price:	2,254,625 IDR-
  Days to Ship:	20 Day(s) or more

• 

  Stepper Motor With Built-in Controller, SSA-TR Series

  SHINANOKENSHI

  [Features]
  · Motor, driver and controller are integrated into the motor flange size.
  · Various operations can be programmed in 8 tables.
  · Can select 4 levels of microstep division (1, 2, 4, 16).
  · Warning/error output function.
  · Design with dedicated bracket for high heat dissipation.
  · Easy setting with provided dedicated application.
  · Lineup of geared types.
  [Applications]
  · Equipment for various factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transport equipment, etc.), positioning and constant-speed rotation control.

  Standard Price:	3,625,600 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Controller Built-In Micro Step Driver and Stepper Motor Set CSA-UP Series

  SHINANOKENSHI

  [Features]
  · Integrated controller function for small and lightweight drivers.
  · Various operations can be programmed in 8 tables.
  · Can select 4 levels of microstep division (1, 2, 4, 16).
  · The origin position can be restored through the origin sensor input.
  · Easy setting with provided dedicated application.
  · Input power supply: 24 V DC.
  · Error output function.
  · Abundant protection functions (overheating, overvoltage, overcurrent).

  Standard Price:	3,965,746 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Controller Built-in Microstepping Driver & Stepper Motor Set, CSA-UP With Power Supply Unit

  SHINANOKENSHI

  Various operations can be programed in 8 tables
  
  [Features]
  · Integrated controller function for small and lightweight drivers.
  · Various operations can be programed in 8 tables.
  · 4 levels of micro step division (1, 2, 4, 16) selectable.
  · Home return operation possible with origin sensor input.
  · Easy setting with the included dedicated application.
  · Input power supply: DC24V.
  · Error output function.
  · Abundant protection functions (excess heating, voltage and current).

  Standard Price:	5,040,313 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Two-Shaft Simultaneous Drive Speed Controller and Double Stepper Motor Set CSA-UT Series

  SHINANOKENSHI

  [Features]
  · Simultaneous 2 motors operation with one controller.
  · Oscillator (pulse generator) built in.
  · All motor operations can be set at numeric values.
  · Equipped with 2 speed setting function (internal setting value / external analog input).
  · Rotation speed: 1 to 1,800r/min, 1r/min may not reach maximum speed depending on the type of motor setting unit, (1,800r/min)
  · Acceleration / deceleration setting: 0 to 99.99 seconds.
  · Current setting: 0 to 2.00A.
  · Continuous reciprocating rotation.
  · Stall detection function (input feedback time).
  · Lightweight and compact design: W70XH90XD33 mm, 190 g.

  Standard Price:	5,446,661 IDR-
  Days to Ship:	14 Day(s) or more

• 

  2-Axis Simultaneous Drive Speed Controller & Stepper Motor 2-Unit Set, CSA-UT Series With Power Supply Unit

  SHINANOKENSHI

  [Features]
  · Simultaneous 2 motors operation with one controller.
  · Oscillator (pulse generator) built in.
  · All motor operations can be set at numeric values.
  · Equipped with 2 speed setting function (internal setting value / external analog input).
  · Rotation speed: 1 to 1,800 r/min,1 r/min setting unit.
  · Acceleration / deceleration setting: 0 to 99.99 seconds.
  · Current setting: 0 to 2.00A.
  · Continuous reciprocating rotation.
  · Stall detection function (input feedback time).
  · Lightweight and compact design: W70 × H90 × D33 mm, 190 g.

  Standard Price:	6,889,652 IDR-
  Days to Ship:	14 Day(s) or more

• 

  5-Phase Micro step driver and stepping motor set CSA-UB series

  SHINANOKENSHI

  5 phase equivalency at with 2 phases at low cost
  
  [Features]
  · 2 phase motor achieving resolution equivalent to a 5 phase motor at low cost.
  · A maximum 25,600 divisions per revolution (minimum step angle: 0.0140625°).
  · Choose from 16 levels (1 to 128).
  · 16 step current setting: 0 to 3.0A (Max).
  · With forward rotation / reverse rotation limit input.
  · Auto power down function

  Standard Price:	2,990,509 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Step out detection driver & stepping motor set CSA-BX series

  SHINANOKENSHI

  Step-out detection, closed loop switchable by switch
  
  [Features]
  · Step-out detection and closed loop mode can be toggled by switch.
  · Step-out detection possible (synchronization loss detection mode) using open loop control.
  · Equipped with step-out prevention function (closed loop mode) using closed-loop control.
  · Motor startup with speed filter, vibration reduction possible at stopping time.
  · 4 step resolution (400, 800, 1600, 3200P/R).
  · 13 step current setting: 0.6 to 3.0A
  · Abundant protection functions (excess heat, excess regeneration, low voltage, excess load and speed).
  · Input power supply: DC24V.
  · Auto power down function.

  Standard Price:	4,745,316 IDR-
  Days to Ship:	14 Day(s) or more

• 

  57 series 3-phase hybrid type stepping motor with a step angle of 1.2°

  FULLING MOTOR

  - 57 series 3-phase hybrid type stepping motor with 1.2° step from FULLING MOTOR.
  - Step angle: 1.2°
  - Step angle accuracy: ± 5% (full step, no load)
  - Resistance accuracy: ± 10% (20℃)
  - Inductance accuracy: ± 20% (1kHz)
  - Temperature Rise: 80℃ Max.
  - Ambient Temperature: -20℃～+50℃
  - Insulation Resistance: 100MΩ Min. ,500VDC
  - Dielectric Strength: 500VAC for one minute
  - Max. radial force: 75N (20mm from the flange)
  - Max. axial force: 15N
  

  CAD ：

  2D / 3D

  Standard Price:	1,015,224 IDR
  Days to Ship:	11 Day(s) or more

• 

  110 series 3-phase hybrid type stepping motor with a step angle of 1.2°-

  FULLING MOTOR

  - Size 110mm 3-Phase Hybrid Stepping Motor from FULLING MOTOR
  - Step angle: 1.2°
  - Step angle accuracy: ± 5% (full step, no load)
  - Resistance accuracy: ± 10%
  - Inductance accuracy: ± 20%
  - Temperature Rise: 100℃ Max. (rated current)
  - Ambient Temperature: -20℃～+50℃
  - Insulation Resistance: 100MΩ Min. ,500VDC
  - Dielectric Strength: 1800VAC, 1s ,5mA
  - Max. radial force: 330N (20mm from the flange)
  - Max. axial force: 100N
  - Insulation class: F
  

  CAD ：

  2D / 3D

  Standard Price:	4,812,124 IDR
  Days to Ship:	11 Day(s) or more

• 

  Speed Controller Built-in Stepper Motor "SSA-VR Series"

  SHINANOKENSHI

  [Features]
  ● An input pulse is not required as the motor, driver and speed controller are integrated into the motor flange size.
  ● Operation parameters, I/O function setting and demo operation are possible with the included dedicated application.
  ● Abnormal rotation detection and automatic recovery are possible with the motor alone.
  ● Speed control is made simple with analog input.
  ● Wide speed control range (0 to 1800r/min).
  [Applications]
  ● Equipment for all types of factories (manufacturing/assembly equipment, inspection equipment, experimental equipment, transportation equipment, etc.) and constant rotation control.

  Standard Price:	4,203,518 IDR-
  Days to Ship:	14 Day(s) or more

Loading...