Small AC Motors（Type：Motor Only）

• 

  Induction Motor, K Series

  ORIENTAL MOTOR

  - Induction Motor, K Series from ORIENTAL MOTOR.
  - World K Series models that conform to power supply voltages in Asia are certified under the CCC System and have built-in overheat protection devices.
  - These models provide high cost performance with the same functions as K Series models that conform to global power supply voltages.
  - The product lineup includes models with output power from 1 W to 150 W.
  

  Standard Price:	1,173,494 IDR-
  Days to Ship:	Same day or more

• 

  Speed Control Motor, Induction Type, K Series

  ORIENTAL MOTOR

  - Speed Control Motor, Induction Type, K Series from ORIENTAL MOTOR.
  - A lineup that includes single-phase 100 VAC, single-phase 200 VAC, specifications as well as output power of 6 to 60 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Inside an enclosure that is installed indoors (provide vent holes).
  - Operating ambient temperature −10 to +40 °C (+14 to +104 °F) (non-freezing).
  - Operating ambient humidity 85%, maximum (non-condensing).
  

  Standard Price:	1,529,416 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Induction Motor, World K2 Series

  ORIENTAL MOTOR

  Compliant with international safety standards, compatible with global voltages
  
  [Features]
  · Compliant with international safety standards.
  · All models are compliant with international safety standards and have overheating protection equipment built in.
  · UL/CSA standards certified.
  Chinese compulsory product authorization system (CCC system) certified.
  CE marking (low voltage directive) compliant.
  · Motor overheat protection device built in.
  Thermal protection, impedance protection.
  · Supports Japan domestic and major foreign country power supply voltages.
  · Can be quickly obtained even overseas when required.
  · Can be combined with orthogonal shaft gearhead to achieve device space saving

  Standard Price:	1,279,274 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Unit Type Speed Control Motor, US Series, Single Motor

  ORIENTAL MOTOR

  - Unit Type Speed Control Motor, US Series, Single Motor from ORIENTAL MOTOR.
  - The US Series is a panel mounted control unit and speed control motor package.
  - Wiring is performed through an easy connection method utilizing connectors.
  - This series is optimal for easy speed control applications. The speed can be set easily with the potentiometer on the front panel of the control unit.
  - The instantaneous stop function is not available.
  

  Standard Price:	1,614,556 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Motor for AC Speed Control Unit

  ORIENTAL MOTOR

  - Motor for AC Speed Control Unit from ORIENTAL MOTOR.
  - A lineup that includes single-phase 100 VAC, 110 VAC, 115 VAC, 200 VAC, 220 VAC and 230 VAC, specifications as well as output power of 6 to 90 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Wide Variety of Products Gearheads are available with 26 different gear ratios from 1:2 to 1:360.
  

  Standard Price:	1,214,817 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Induction Motor, KII Series

  ORIENTAL MOTOR

  [Features]
  ・ Ideal for one-way, continuous operation
  ・ You can drive easily
  ・ Excellent motor performance
  ・ Compatible with protection rating IP66 (Type with terminal box)
  ・ Equipped with a low profile terminal box (Type with terminal box)
  ・ Gearhead design points
  ・ Equipped with high-performance gearhead

  Standard Price:	921,585 IDR
  Days to Ship:	20 Day(s) or more

• 

  Single-Unit Motor with Electromagnetic Brake, World K2 Series

  ORIENTAL MOTOR

  Compatible with global voltages
  
  [Features]
  · Compliant with international safety standards.
  · All models are compliant with international safety standards and have overheating protection equipment built in.
  · UL/CSA standards certified.
  Chinese compulsory product authorization system (CCC system) certified.
  CE marking (low voltage directive) compliant.
  · Motor overheat protection device built in.
  Thermal protection, impedance protection.
  · Supports Japan domestic and major foreign country power supply voltages.
  · Can be quickly obtained even overseas when required.
  · Can be combined with orthogonal shaft gearhead to achieve device space saving

  Standard Price:	2,932,816 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Single Unit Reversible Motor, World K2 Series

  ORIENTAL MOTOR

  Individual motor product from the world K series usable in Japan and throughout the world.
  
  [Features]
  · Conforms to international safety standards.
  · All models are compliant with international safety standards and have overheating protection equipment built in.
  · UL/CSA standards certified.
  Chinese compulsory product authorization system (CCC system) certified.
  CE marking (low voltage directive) compliant.
  · Motor overheat protection device built in.
  Thermal protection, impedance protection.
  · Supports Japan domestic and major foreign country power supply voltages.
  · Can be quickly obtained even overseas when required.
  · Can be combined with orthogonal shaft gearhead to achieve device space saving

  Standard Price:	1,374,734 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Speed Control Motor, World K2 Series

  ORIENTAL MOTOR

  - Speed Control Motor, World K2 Series from ORIENTAL MOTOR.
  - A lineup that includes single-phase 100 VAC, 110, VAC, 115 VAC, 200 VAC, 220 VAC and 230 VAC specifications as well as output power of 6 to 40 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Inside an enclosure that is installed indoors (provide vent holes).
  - Operating ambient temperature 0 to 50 °C (non-freezing).
  - Operating ambient humidity 85%, maximum (non-condensing).
  

  Standard Price:	1,593,916 IDR-
  Days to Ship:	15 Day(s) or more

• 

  AC Motor, KIIS Series

  ORIENTAL MOTOR

  [Features]
  ・ Highly efficient and highly characteristic three-phase motor with optimal design
  ・ Achieves the best characteristics in combination with an inverter
  ・ Compatible with protection rating IP66 (Type with terminal box)
  ・ Equipped with stainless steel shaft as standard
  ・ Compatible with H1 grease for food machine
  ・ Compact and lightweight
  ・ Low profile terminal box (Type with terminal box)
  ・ International standards (UL/CSA standard, CCC system, CE marking)

  Standard Price:	1,859,563 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Induction Motor 60W [S9I60]

  SPG

  Capacitor run single-phase motor and three-phase induction motor are available. Allows for continuous rated operation.
  
  [Features]
  · The startup torque of a capacitor run type single-phase motor is not that great, but it has a simple structure and is reliable, with high efficiency and low noise.
  · The startup torque of a three-phase motor is great, for high reliability and high efficiency.
  · There are 2 types of voltage specifications for single-phase motors (C [100V50/60Hz and D200V50/60Hz]) and 1 type for three-phase motors (U [200V50/60Hz)]
  · The rated number of rotations fluctuates depending on the size of the load.
  · When changing the rotary direction of a single-phase motor, do so after completely stopping the motor.

  CAD ：

  2D / 3D

  Standard Price:	1,574,243 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Reversible Motor, K Series

  ORIENTAL MOTOR

  - Reversible Motor, K Series from ORIENTAL MOTOR.
  - World K Series models that conform to power supply voltages in Asia are certified under the CCC System and have built-in overheat protection devices.
  - A lineup that includes single-phase 100 VAC, single-phase 200 VAC, specifications as well as output power of 1 to 90 W is provided.
  - A motor's life is determined by its bearing. We adopted high performance bearing grease to lubricate this important component. Life is twice as long as a conventional model.
  

  Standard Price:	1,431,923 IDR
  Days to Ship:	Same day

• 

  Torque Motor K Series/World K Series, Individual Motor

  ORIENTAL MOTOR

  Optimal for applications that require torque adjustments, such as winding, presser applications, etc.
  
  [Features]
  · Torque motor that conforms to international safety standards (excluding 40W).
  · Motor rotation speed and torque can be adjusted by installing an external voltage adjuster.
  · Torque motor unit TM series that combines with a power controller that is capable of easily adjusting torque is also available

  Standard Price:	1,743,672 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pack-In Type Speed Control Motor Unit, PSH Series

  ORIENTAL MOTOR

  Control pack built into the back of the motor
  
  [Features]
  · Control pack and speed setting volume are built into the back of the motor.
  · Wire connection not required. Operation is also simple.
  · Variable speed range is 50Hz: 90 to 1400r/min and 60Hz90 to 1500r/min.
  · Terminal box type. Appropriate for controlling forward rotation and reverse rotation with an external relay or the like.
  · Plug cord type.
  · Can be switched between forward rotation and reverse rotation with just a CW/CCW switch in the switch box.
  · Simple connection just by connecting AC power cord with plug (2 m) to a commercial power supply

  Standard Price:	3,966,346 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Extra Low Speed Synchronous Motor, SMK Series

  ORIENTAL MOTOR

  Continuous rated synchronization motor capable of instant forward/reverse operation
  
  [Features]
  · Extra low-speed synchronous motors are continuous rated synchronization motors capable of instant forward/reverse operation.
  · Has the same structure as a stepping motor, but because it can be easily driven with an alternating current power supply, it is also called an "AC stepping motor."
  · Rotates precisely in sync with power supply frequency.
  · Rotation speed does not change even if load fluctuates.
  · Capacitor-run motor that can be easily run with just a capacitor (for the SMK5 type, external resistance is also required.
  · Capable of continuous rated drive in both forward and reverse operation.
  · Motor is capable of starting, stopping, and forward/reverse operation within 1.5 cycles of the power supply frequency (0.03 seconds if 50Hz, and 0.025 if 60Hz).
  · Optimal for transport conveyors that start and stop repeatedly, etc.
  · Rotates at a fixed speed even in lowering state.
  · Also appropriate for elevator mechanisms and the like for which a drive with a consistent speed is desired for up/down motion
  ·
  · Extra low-speed synchronous motors have the same structure as stepping motors and use a permanent magnet in their rotors, which gives them slight retention force even as-is.
  · A relatively large retention force can be used by using a gearhead. Convenient for mounting green dampers for absorbing shock, slit panels for origin searching, etc.

  Standard Price:	1,480,979 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Induction Motor 15W [S7I15]

  SPG

  Capacitor run single-phase motor and three-phase induction motor are available. Allows for continuous rated operation.
  
  [Features]
  · The startup torque of a capacitor run type single-phase motor is not that great, but it has a simple structure and is reliable, with high efficiency and low noise.
  · The startup torque of a three-phase motor is great, for high reliability and high efficiency.
  · There are 2 types of voltage specifications for single-phase motors (C [100V50/60Hz and D200V50/60Hz]) and 1 type for three-phase motors (U [200V50/60Hz)]
  · The rated number of rotations fluctuates depending on the size of the load.
  · When changing the rotary direction of a single-phase motor, do so after completely stopping the motor.

  CAD ：

  2D / 3D

  Standard Price:	1,009,964 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Induction Motor 25W [S8I25]

  SPG

  Capacitor run single-phase motor and three-phase induction motor are available. Allows for continuous rated operation.
  
  [Features]
  · The startup torque of a capacitor run type single-phase motor is not that great, but it has a simple structure and is reliable, with high efficiency and low noise.
  · The startup torque of a three-phase motor is great, for high reliability and high efficiency.
  · There are 2 types of voltage specifications for single-phase motors (C [100V50/60Hz and D200V50/60Hz]) and 1 type for three-phase motors (U [200V50/60Hz)]
  · The rated number of rotations fluctuates depending on the size of the load.
  · When changing the rotary direction of a single-phase motor, do so after completely stopping the motor.

  CAD ：

  2D / 3D

  Standard Price:	1,111,877 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Speed Control MotorInduction TypeSingle Unit Motor

  ORIENTAL MOTOR

  - Speed Control Motor, Induction Type, Single Unit Motor, MSS series from ORIENTAL MOTOR.
  - This product is a compact no-contact speed control motor, with 3W and 42 mm mounting angle.
  - The shape end of shaft has 2 types available, round shaft type for MSM003-003 and Pinion shaft type for MSM003-403.
  - Motor lead wire includes 5 stranded wires with 300 mm length (UL style 3266, AWG24).
  - The weight of the motor is 0.35 kg.
  

  Standard Price:	1,600,891 IDR
  Days to Ship:	15 Day(s) or more

• 

  Speed Control Motor, Reversible Type, K Series

  ORIENTAL MOTOR

  - Speed Control Motor, Reversible Type, K Series from ORIENTAL MOTOR.
  - A lineup that includes single-phase 100 VAC, single-phase 200 VAC, specifications as well as output power of 6 to 40 W is provided.
  - The dimension of square flange can be selected from 60 to 90 mm.
  - Inside an enclosure that is installed indoors (provide vent holes).
  - Operating ambient temperature −10 to +50 °C (+14 to +122 °F) (non-freezing).
  - Operating ambient humidity 85%, maximum (non-condensing).
  

  Standard Price:	1,604,236 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Reversible Motor, KII Series

  ORIENTAL MOTOR

  [Features]
  ・ Ideal for one-way, continuous operation
  ・ You can drive easily
  ・ Excellent motor performance
  ・ Compatible with protection rating IP66 (Type with terminal box)
  ・ Equipped with a low profile terminal box (Type with terminal box)
  ・ Gearhead design points
  ・ Equipped with high-performance gearhead

  Standard Price:	422,571 IDR-
  Days to Ship:	20 Day(s) or more

• 

  Reaction Synchronous Motor K Series

  ORIENTAL MOTOR

  A reaction synchronous motor is a motor that rotates at a rotation speed that is synchronized with the power supply frequency. Single-direction continuous operation, and is appropriate for when a fixed rotation speed is desired even if the load fluctuates.

  Standard Price:	1,449,554 IDR-
  Days to Ship:	30 Day(s) or more

• 

  Increased Safety Explosion Proof Type Motor, K Series

  ORIENTAL MOTOR

  Motor with improved insulation performance and other safety factors against danger, damage, etc. caused by increased ambient temperature so that it can be used in hazardous places with a risk of generation of explosive gas, flammable gas, etc. Has completely closed structure, which makes it impossible for the insulated charging component to come into contact with exterior and also prevents dust and the like from entering.

  Standard Price:	5,003,152 IDR-
  Days to Ship:	30 Day(s) or more

• 

  Induction Motor, World K Series (RoHS Non-Compliant)

  ORIENTAL MOTOR

  Induction motor with thermal protector for signals 25 W, 40 W, 60 W, 90 W Lead wire type, type with terminal box.
  [Features]
  ・ Built-in thermal protector for signals
  ・ Global voltage compatible
  ・ CE marking

  Standard Price:	1,843,171 IDR
  Days to Ship:	20 Day(s) or more

• 

  Induction Motor 40W [S9I40]

  SPG

  Capacitor run single-phase motor and three-phase induction motor are available. Allows for continuous rated operation.
  
  [Features]
  · The startup torque of a capacitor run type single-phase motor is not that great, but it has a simple structure and is reliable, with high efficiency and low noise.
  · The startup torque of a three-phase motor is great, for high reliability and high efficiency.
  · There are 2 types of voltage specifications for single-phase motors (C [100V50/60Hz and D200V50/60Hz]) and 1 type for three-phase motors (U [200V50/60Hz)]
  · The rated number of rotations fluctuates depending on the size of the load.
  · When changing the rotary direction of a single-phase motor, do so after completely stopping the motor.

  CAD ：

  2D / 3D

  Standard Price:	1,339,184 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Induction Motor, BH Series, Single-Unit Motor

  ORIENTAL MOTOR

  - Induction Motor, BH Series, Single-Unit Motor from ORIENTAL MOTOR.
  - Induction motors are optimal for uni-directional and continuous operation, such as a conveyor system.
  - Induction motors can be operated easily from an AC power supply.
  - These motors achieve a high output of 200 W (1/4 HP) with a frame size of 104 mm (4.09 inch).
  - With each combination type, the motor and gearhead come pre-assembled for easy installation into your equipment.
  

  Standard Price:	3,349,006 IDR-
  Days to Ship:	15 Day(s) or more

• 

  Motors with Electromagnetic Brake BH series motor units

  ORIENTAL MOTOR

  Smallest size in its class but achieves 200W output.

  Standard Price:	8,702,896 IDR-
  Days to Ship:	21 Day(s) or more

• 

  Induction Motor 6W [S6I06]

  SPG

  Capacitor run single-phase motor and three-phase induction motor are available. Allows for continuous rated operation.
  
  [Features]
  · The startup torque of a capacitor run type single-phase motor is not that great, but it has a simple structure and is reliable, with high efficiency and low noise.
  · The startup torque of a three-phase motor is great, for high reliability and high efficiency.
  · There are 2 types of voltage specifications for single-phase motors (C [100V50/60Hz and D200V50/60Hz]) and 1 type for three-phase motors (U [200V50/60Hz)]
  · The rated number of rotations fluctuates depending on the size of the load.
  · When changing the rotary direction of a single-phase motor, do so after completely stopping the motor.

  CAD ：

  2D / 3D

  Standard Price:	1,049,179 IDR-
  Days to Ship:	9 Day(s) or more

• 

  Extra Low Speed Synchronous Motor SMK Series for AC Power Supplies

  ORIENTAL MOTOR

  Extra low-speed synchronous motors are continuous rated synchronization motors capable of instant forward/reverse operation. Has the same structure as a stepping motor, but because it can be easily driven with an alternating current power supply, it is also called an "AC stepping motor."

  Standard Price:	1,409,928 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Individual C and B Motor

  ORIENTAL MOTOR

  Compared with other AC small standard motors, the C and B motor can start and stop more quickly, and has excellent responsiveness. Appropriate for one-direction applications that continuously and frequently start and stop.
  
  [Features]
  · High-accuracy, high-response clutch and brake enable high-frequency starts and stops.
  · No-contact control of the clutch and brake operation is possible if a C and B controller (sold separately) is used.
  · Compact design for easy handling.
  · Drive parts can be clustered neatly together without taking up space.
  · The C and B motor GC dedicated gearhead and the GCH gearhead emphasize impact resistance, have been made stronger, have been specialized, and boast improved reliability (the GN gearhead and other gearheads cannot be mounted).
  · For induction motors, lead wire type, type with small terminal box, and speed control type are available.
  · Also, an abundant array of power supply specifications are available: single-phase 100V and 200V, and three-phase 200V

  Standard Price:	8,561,562 IDR-
  Days to Ship:	20 Day(s) or more

Loading...