Bearing Units（Bearing Unit, Type：Pillow Type）

• 

  Pillow Block Unit with Set Screws, Cylindrical Hole Shape, UCP

  ASAHI SEIKO

  Standard model number. Bearing box with a sturdy integrated structure and inserted bearing. Used with a wide range of transmission equipment. Cast iron series
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  Standard Price:	186,676 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Ball Bearing/Cast Iron/Pillow Blocks

  MISUMI

  This is one of the most typical type ball bearing unit, and a bearing is built into the robust and integrally structured housing.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	168,290 IDR-
  Days to Ship:	Same day or more

• 

  Ball Bearing Unit, Cast Iron Pillow

  NTN

  One of the standard formats for bearing units, this product is equivalent to the combination of a plummer block and a self-aligning ball bearing. Can be mounted to the shaft by just tightening a ball screw, and is used frequently in transmission equipment and general machinery.

  • STOCK

  CAD ：

  2D / 3D

  Standard Price:	155,322 IDR-
  Days to Ship:	Same day or more

• 

  Plummer Block

  NTN

  This plummer block is a bearing box for either automatic spherical roller bearings or self-aligning ball bearings. Embedded with a felt seal, rubber seal, or labyrinth seal as sealing equipment, and corresponds to either grease or oil lubricant for its lubrication method.

  Standard Price:	980,002 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cast Iron Pillow-Type Unit UCP

  NIPPON PILLOW BLOCK

  [Features]One of the most representative model of bearing unit. Unit type: insert bearing unit

  CAD ：

  2D / 3D

  Standard Price:	161,370 IDR-
  Days to Ship:	Same day or more

• 

  Ball Bearing/Pillow Blocks

  MISUMI

  [Features]This is a lubrication-free pillow type ball bearing unit. 2 types are available: set screw fixed type and eccentric ring fixed type.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	175,939 IDR-
  Days to Ship:	Same day or more

• 

  Cast Iron Pillow Block Unit, UKIP

  NIPPON PILLOW BLOCK

  Pillow unit for use with heavy loads. The bearing box is thick with high rigidity, making it optimal for heavy load, vibration, and shock applications.

  CAD ：

  2D

  Standard Price:	693,000 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Cast Iron Pillow Block Unit BLP

  NIPPON PILLOW BLOCK

  [Features]Pillow block unit designed for weight reduction. ·With set screws. Suitable for light to normal loads in limited spaces.

  CAD ：

  2D / 3D

  Standard Price:	143,550 IDR
  Days to Ship:	8 Day(s) or more

• 

  Tapered Hole Cast Iron Pillow Block Unit UKP

  NIPPON PILLOW BLOCK

  [Features]General-purpose pillow block unit. ·Unit type: insert bearing unit, tapered hole adapter type

  CAD ：

  2D

  Standard Price:	178,200 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Cast Iron Pillow Block Unit, UCPA

  NIPPON PILLOW BLOCK

  [Features]Pillow block unit designed to reduce the installation space.

  CAD ：

  2D / 3D

  Standard Price:	232,650 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Pillow Block Unit

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  Standard Price:	125,309 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cast Iron Pillow-Type Unit UCIP

  NIPPON PILLOW BLOCK

  The UCIP bearing box is a unit designed for high loads, with thick walls for excellent rigidity.
  The drilled mounting bolt hole ensures positioning accuracy.
  This unit can withstand high loads, vibration and shock.

  CAD ：

  2D / 3D

  Standard Price:	693,000 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Cast Iron Narrow Width Pillow Block Unit UCUP

  NTN

  A narrow width pillow unit that's optimal for space saving.
  
  [Features ]
  · Cylindrical holes, set screw system

  CAD ：

  2D / 3D

  Standard Price:	227,700 IDR-
  Days to Ship:	Same day or more

• 

  Pillow Block Unit Silver Series with Set Screws, Cylindrical Hole Shape, KP

  ASAHI SEIKO

  [Features]
  · Although the bearing box is a standard pillow shape, it is smaller and more lightweight than conventional insert bearing units.
  · Also, the bearing box is marked with a center mark for easy positioning.
  · The fixation method for the bearing box and shaft is the set screw method.

  Standard Price:	206,806 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel Pillow

  NTN

  A stainless steel bearing unit filled with grease for food processing machinery. Has excellent corrosion-resistance and dust-proofing properties.

  • STOCK

  CAD ：

  2D / 3D

  Standard Price:	1,223,632 IDR-
  Days to Ship:	Same day or more

• 

  Center Height Pillow Block Unit

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  Standard Price:	158,146 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cast Iron Pillow Block Unit UCPH

  NIPPON PILLOW BLOCK

  Designed as a high-center pillow unit with high strength to shock loads.

  CAD ：

  2D / 3D

  Standard Price:	277,200 IDR
  Days to Ship:	8 Day(s) or more

• 

  Ball Bearing/Cast Iron/Bottom Mount

  MISUMI

  [Features]This is a lubrication type, bottom mount type (casting) ball bearing unit.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	248,610 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pillow Block Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, UP

  ASAHI SEIKO

  [Features]
  · Smaller and more lightweight than conventional insert bearing units.
  · Also, the bearing box is marked with a center mark for easy positioning.

  • Volume Discount

  Standard Price:	190,856 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Eccentric Collar Type Unit

  NTN

  Although this eccentric collar type bearing unit maintains a tight connection between the shaft and the inner ring even when there are shock loads and vibration, it cannot be used in areas where there is repeated forward and reverse rotation.

  Standard Price:	692,100 IDR
  Days to Ship:	12 Day(s) or more

• 

  Pillow Block Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, MUP

  ASAHI SEIKO

  The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  Standard Price:	579,500 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Narrow Pillow Block Unit

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  Standard Price:	133,050 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Steel Plate Ball Bearing Units/Pillow Blocks

  MISUMI

  [Features]This is an inexpensive ball bearing unit (pillow type) that combines 2 pressed steel plates.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	145,341 IDR-
  Days to Ship:	8 Day(s) or more

• 

  [C-VALUE] Ball Bearing Units - Cast Iron, Pillow Blocks

  MISUMI

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	110,918 IDR-
  Days to Ship:	8 Day(s) or more

• 

  General Structural Use Rolled Steel Pillow Block Unit

  NTN

  A standard in bearing unit format. Simply mounting by just tightening a ball screw to mount it to the shaft. The most commonly used model in transmission equipment and general machinery.

  Standard Price:	1,938,980 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Ductile Cast Iron Pillow Shape

  NTN

  A standard in bearing unit format. Simply mounting by just tightening a ball screw to mount it to the shaft. The most commonly used model in transmission equipment and general machinery.

  CAD ：

  2D / 3D

  Standard Price:	170,280 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Lightweight Cast Iron Pillow

  NTN

  [Features]
  · A combination of plummer blocks and a ball bearing.
  [Applications]
  · Used frequently in transmission equipment and general machinery.

  CAD ：

  2D / 3D

  Standard Price:	152,460 IDR-
  Days to Ship:	Same day or more

• 

  Thick Cast Iron Pillow

  NTN

  The bearing box is thick for high rigidity, and is also appropriate for large shock loads. Also, the mounting bolt holes are drilled for accurate positioning. For this reason, it is appropriate for use with systems such as ceiling cranes.

  CAD ：

  2D / 3D

  Standard Price:	731,935 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Cast Iron Center Height Pillow Block Unit UCHP

  NTN

  A high center pillow unit optimal for when the shaft center is a long distance from the base.

  CAD ：

  2D / 3D

  Standard Price:	252,708 IDR-
  Days to Ship:	Same day or more

• 

  Steel Plate Pillow Block Unit ASPP

  NTN

  A standard in bearing unit format. Simply mounting by just tightening a ball screw to mount it to the shaft. The most commonly used model in transmission equipment and general machinery.

  CAD ：

  2D / 3D

  Standard Price:	117,724 IDR-
  Days to Ship:	Same day or more

• 

  Cast Iron Pillow Block Unit UP

  NIPPON PILLOW BLOCK

  This pillow unit combines a lightweight bearing with a bearing box made from a special lightweight alloy. Oil free, small, lightweight, and clean bearing unit

  CAD ：

  2D / 3D

  Standard Price:	386,100 IDR
  Days to Ship:	8 Day(s) or more

• 

  Steel Plate Pillow Block Unit SBPP

  NIPPON PILLOW BLOCK

  Lightweight pillow unit for light loads made from the combination of a lightweight bearing and a press machined steel plate bearing box.

  CAD ：

  2D / 3D

  Standard Price:	124,740 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Stainless Steel Pillow-Type Unit UCSP-H1-S6 UCSPA-H1-S6

  NIPPON PILLOW BLOCK

  Pillow-type unit featuring a bearing made from stainless steel and a bearing box made from either stainless steel or plastic for excellent corrosion resistance

  CAD ：

  2D / 3D

  Standard Price:	5,445,000 IDR
  Days to Ship:	14 Day(s) or more

• 

  Stainless Steel Pillow-Type Unit USP-S6 UCSPA-H1-S6

  NIPPON PILLOW BLOCK

  Pillow-type unit featuring a bearing made from stainless steel and a bearing box made from either stainless steel or plastic for excellent corrosion resistance

  Standard Price:	1,036,520 IDR
  Days to Ship:	11 Day(s) or more

• 

  Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPH Type

  ASAHI SEIKO

  Pillow-type unit UCP200-type bearing box with raised center height.

  Standard Price:	327,346 IDR
  Days to Ship:	13 Day(s) or more

• 

  Ball Bearing Unit, Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPA Type

  ASAHI SEIKO

  A more compact bearing box than the pillow-type unit UCP200 type, with screw holes for mounting to suit areas with space restrictions.

  Standard Price:	277,188 IDR
  Days to Ship:	11 Day(s) or more

• 

  Steel Plate Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, BPP Type

  ASAHI SEIKO

  Combines a built-in bearing with a rubber seal in a simple double steel plate bearing box structure, making it suitable for a transmission shaft with a relatively light load and medium to low speed.

  Standard Price:	168,208 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pillow Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series, MUSP Shape

  ASAHI SEIKO

  The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well. Environmentally friendly series
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  Standard Price:	815,667 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Steel Plate Pillow Block Unit

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  Standard Price:	95,498 IDR-
  Days to Ship:	11 Day(s) or more

Loading...