Rotary Shafts（End Shape (Right)：Straight）

• 

  MiSUMi Economy

  Rotary Shafts Straight

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  MiSUMi Economy

  Rotary Shafts Both Ends Stepped

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s)

• 

  Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Threaded, One End Tapped

  MISUMI

  Up to 4 keyways and 3 flats possible! Furthermore, the L dimension has been expanded to a maximum of 1000mm!
  
  [Basic shape] Straight
  [Shaft end shape (left)] No processing
  [Shaft end shape (right)] No processing
  [Material] S45C equivalent, SUS304, SCM435< br>[Additional machining available] Key groove, flat chamfer, double chamfer, retaining ring groove, slit cam groove, L dimension tolerance change, spanner groove, C chamfer width change

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Rotary Shafts - One End Stepped and Threaded

  MISUMI

  Expanded to up to 1000mmtotal length!
  It is also possible to process key grooves, flats, and retaining rings on stepped parts with additional machining!
  
  [Basic shape] Single step on one end
  [Shaft end shape (left)] Male thread
  [Shaft end shape (right)] No processing
  [Material] S45C equivalent, SUS304, SCM435
  [Additional machining available] Keyway, retaining ring groove, flattening, left-handed thread change, fine thread change, slit cam groove, L dimension tolerance change, slotted groove, coaxiality change, C chamfer width change, Relief dimension processing

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Rotary Shafts - One End Stepped

  MISUMI

  Expanded to up to 1000mmtotal length!
  It is also possible to process key grooves, flats, and retaining rings on stepped parts with additional machining!
  
  [Basic shape] Single step on one end
  [Shaft end shape (left)] No processing
  [Shaft end shape (right)] No processing
  [Material] Equivalent to S45C, SUS304, SCM435
  [Additional machining available] Keyway, retaining ring groove, flat surface, slit cam groove, L dimension tolerance change, spanner groove, coaxiality change, C chamfer width change

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - Both Ends Stepped and Threaded

  MISUMI

  Expand L size to up to 1000mm! Furthermore, up to 4 keyways and 3 flats are possible!
  
  [Basic shape] Straight
  [Shaft end shape (left)] Female thread
  [Shaft end shape (right)] No processing
  [Material] S45C equivalent, SUS304, SCM435< br>[Additional machining available] Key groove, flat chamfer, double chamfer, retaining ring groove, slit cam groove, L dimension tolerance change, slotted groove, C chamfer width change, female thread depth change

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Rotary Shafts - End Shape Selectable

  MISUMI

  [Features]Shaft end shapes can be freely combined. The basic shape can be selected from straight, 1 step on 1 end, and 1 step on both ends.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Driving Shafts - Both Ends Stepped

  MISUMI

  Expanded to a maximum total length of 1000mm! It is also possible to process key grooves, flattening, and retaining rings on stepped parts with additional machining!
  
  [Basic shape] Single step on both ends
  [Shaft end shape (left)] No processing
  [Shaft end shape (right)] No processing
  [Material] Equivalent to S45C, SUS304, SCM435
  [Additional machining available] Key groove, retaining ring groove, flat surface, slit cam groove, L dimension tolerance change, spanner groove, coaxiality change, C chamfer width change, female thread addition

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Rotary Shafts - Both Ends Double Stepped

  MISUMI

  [Basic shape] Two steps on both ends
  [Shaft end shape (left)] No processing
  [Shaft end shape (right)] No processing
  [Material] S45C equivalent, SUS304
  [Additional processing Compatible with: Keyway, retaining ring groove, flattening, slit cam groove, L dimension tolerance change, spanner groove

  CAD ：

  2D / 3D

  Days to Ship:	13 Day(s)

• 

  Hollow Rotary Shafts - Lightweight, Straight

  MISUMI

  "This product is hollow and thus, is suitable for weight-saving."

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Tapped

  MISUMI

  Expand L dimension up to 1000mm!
  >[Basic shape] Straight
  [Shaft end shape (left)] No processing
  [Shaft end shape (right)] No processing
  [Material] S45C equivalent, SUS304
  [Hardness ] Without hardening
  [Keyway] With keyway
  [Additional machining available] Flat chamfering, double chamfering, retaining ring groove, slit cam groove, L dimension tolerance change, spanner groove, C chamfer width change

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  [Clean & Pack] Rotary Shaft - End Shape Selectable

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  ·Degreasing (Anti-rust single packing)	: Part Number SL-□□
  ·Precision cleaning (Degassing double packing)	: Part Number SH-□□
  ·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Rotary Shafts - One End Stepped with Retaining Ring Groove

  MISUMI

  [Basic shape] One step on one end
  [Shaft end shape (left)] No processing
  [Shaft end shape (right)] No processing
  [Processing] Step part with retaining ring groove
  [Material] S45C equivalent, SUS304
  [Additional machining available] Keyway, retaining ring groove, flattening, slit cam groove, L dimension tolerance change

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - Both Ends Stepped and Tapped

  MISUMI

  Expand L size to up to 1000mm!
  
  [Basic shape] Straight
  [Shaft end shape (left)] Female thread
  [Shaft end shape (right)] No processing
  [Processing] With key groove
  [ Material] S45C equivalent, SUS304 [Additional machining available] Flat chamfer, 2 chamfers, retaining ring groove, slit cam groove, L dimension tolerance change, spanner groove, slot groove, C chamfer change, female thread depth change

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Rotary Shafts-One End Stepped and Tapped

  MISUMI

  Expanded to a maximum length of 1000mm!
  It is also possible to process key grooves, flats, and retaining rings on stepped parts with additional machining!
  
  [Basic shape] Single step on one end
  [Shaft end shape (left)] Stepped female thread
  [Shaft end shape (right)] No processing
  [Material] Equivalent to S45C, SUS304
  [Additional machining available] Keyway, retaining ring groove, flat surface, slit cam groove, L dimension tolerance change, slotted groove, concentricity change, C chamfer width change, female thread depth change

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  [Clean & Pack] Rotary Shaft - Straight

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  ·Degreasing (Anti-rust single packing)	: Part Number SL-□□
  ·Precision cleaning (Degassing double packing)	: Part Number SH-□□
  ·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  [Clean & Pack] Rotary Shaft - Both Ends Stepped

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  ·Degreasing (Anti-rust single packing)	: Part Number SL-□□
  ·Precision cleaning (Degassing double packing)	: Part Number SH-□□
  ·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  MiSUMi Economy

  Rotary Shafts One End Tapped

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s)

Loading...