Clamping Screws（Material (Thread)：Stainless Steel）

• • On Sale Till 31/03/2025

  

  Clamping Screws / High Locked Screws - Non-Reverse Serrated Type

  MISUMI

  - MISUMI offers the FSMG/FSUG series of Clamping Screws / High Locked Screws with a Non-Reverse Serrated Type.
  - The main body of the clamping ball screw is made of SCM435 equivalent (FSMG) or SUS304 equivalent (FSUG).
  - The ball of the clamping screw is made of SUJ2 Equivalent (FSMG) or SUS440C equivalent (FSUG).
  - The screws are available in five sizes: M6, M8, M10, M12, or M16.
  - These screws can be used with commercially available nuts that are equivalent to JIS6g.
  - The maximum slope angle of the tip is 9°.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	145,341 IDR-
  	Special Price
  Days to Ship:	14 Day(s) or more

• • On Sale Till 31/03/2025

  

  Clamping Screws / High Locked Screws - Non-Reverse Type

  MISUMI

  - MISUMI offers the FSMB/FSUB series of Clamping Screws / High Locked Screws with a Non-Reverse Type.
  - The main body of the clamping ball screw is made of SCM435 equivalent (FSMB) or SUS304 equivalent (FSUB).
  - The ball of the clamping screw is made of SUJ2 Equivalent (FSMB) or SUS440C equivalent (FSUB).
  - The screws are available in five sizes: M6, M8, M10, M12, or M16.
  - These screws can be used with commercially available nuts that are equivalent to JIS6g.
  - The maximum slope angle of the tip is 9°.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	103,269 IDR-
  	Special Price
  Days to Ship:	14 Day(s) or more

• • On Sale Till 31/03/2025

  

  Clamping screws - Ball type

  MISUMI

  - MISUMI offers the RSM/RSU series of ball tips clamping screws.
  - The main body of the clamping ball screw is made of SCM435 equivalent material for RSM, and SUS304 equivalent material for RSU.
  - The ball of the clamping screw is made of SUJ2 equivalent material for RSM, and SUS440C equivalent material for RSU.
  - The screw is available in eight sizes: M3, M4, M5, M6, M8, M10, M12, or M16.
  - The screw can be used with commercially available nuts that are equivalent to JIS6g.
  - This product is used for clamping workpieces and is not intended to rotate the face balls. The rotation of the face balls depends on the caulking condition of each ball.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	34,422 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Clamping screws - Angle type

  MISUMI

  - MISUMI offers the FSM/FSU series of flat tips clamping screws.
  - The main body of the clamping ball screw is made of SCM435 equivalent material in the case of FSM, and SUS304 equivalent material in the case of FSU.
  - The ball of the clamping screw is made of SUJ2 equivalent material for FSM, and SUS440C equivalent material for FSU.
  - The screw is available in seven sizes: M4, M5, M6, M8, M10, M12, or M16.
  - The screw can be used with commercially available nuts that are equivalent to JIS6g.
  - For the angle type, the face of the screw has a hemisphere appearance due to its rotation, instead of a flat plane.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	49,722 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Clamping Screw SCS-N, BR, CE

  NABEYA BI-TECH

  [Features]
  · Clamping screw with special ball fitted.
  · SCS-N Main body: steel, ball: plastic SCS-BR main body: steel, ball: brass SCSS-CE main body: stainless steel, ball: ceramic.
  · Complete ball point contact ensures workpiece firmly fixed.
  · For tool holder set screw or pressure piece / stopper etc.

  CAD ：

  2D / 3D

  Standard Price:	156,172 IDR-
  	Special Price
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Clamping bolts - Ball type

  MISUMI

  - MISUMI offers the HRSM/HRSU series of ball tips clamping screws.
  - The main body of the clamping ball screw is made of SCM435 equivalent material in the case of HRSM, and SUS304 equivalent material in the case of HRSU.
  - The ball of the clamping screw is made of SUJ2 equivalent material for HRSM, and SUS440C equivalent material for HRSU.
  - The screw is available in seven sizes: M4, M5, M6, M8, M10, M12, or M16.
  - The screw can be used with commercially available nuts that are equivalent to JIS6g.
  - This product is designed for clamping workpieces and not for rotating the face balls. The rotation of face balls depends on the caulking condition of each face ball.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	47,810 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  SCB-FB Clamping Bolt

  NABEYA BI-TECH

  [Features]
  · Standardization for all sizes of thread.
  · Ball has flexible rotation up to 9°
  · Securely clamps with surface part of ball with reverse prevention mechanism.
  · Nominal designation of screw thread / length / surface treatment etc., custom specifications can also be produced.
  · Contact customer service.

  CAD ：

  2D / 3D

  Standard Price:	127,915 IDR-
  	Special Price
  Days to Ship:	8 Day(s) or more

• 

  Clamping bolt _SCB-GB/SCBS-GB

  NABEYA BI-TECH

  [Features]
  · Standardization for all sizes of thread.
  · Ball has flexible rotation up to 9°.
  · Securely clamps with reverse prevention mechanism.
  · Notched ball firmly clamps even rough surfaces such as casting surfaces etc.
  · Nominal designation of screw thread / length / surface treatment etc., custom specifications can also be produced.

  CAD ：

  2D / 3D

  Standard Price:	185,343 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Clamping bolts - Angle type

  MISUMI

  - MISUMI offers the HFSM/HFSU series of flat tips clamping screws.
  - The main body of the clamping ball screw is made of SCM435 equivalent material in the case of HFSM, and SUS304 equivalent material in the case of HFSU.
  - The ball of the clamping screw is made of SUJ2 equivalent material for HFSM, and SUS440C equivalent material for HFSU.
  - The screw is available in seven sizes: M4, M5, M6, M8, M10, M12, or M16.
  - The screw is compatible with commercially available nuts that are equivalent to JIS6g.
  - In the case of the Angle Type, a spherical hemisphere appears on the face due to its rotation instead of a flat plane.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	61,196 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Clamping Screw SCS-GB/SCSS-GB

  NABEYA BI-TECH

  The ball is a clamping screw with a jagged ball that rotates flexibly up to 9°.
  [Features]
  ·It is securely clamped by the anti-reverse mechanism.
  ·The jagged ball can be securely clamped even on rough surfaces such as casting surfaces.
  [Applications]
  ·Hold down the workpiece, etc.
  ·For tool holder set screw or pressure piece / stopper, etc.

  CAD ：

  2D / 3D

  Standard Price:	180,880 IDR-
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Clamping Screw, SCS-FB

  NABEYA BI-TECH

  [Features]
  · [SCS-FB] Main body: steel, ball: steel [SCSS-FB] Main body: stainless steel, ball: stainless steel with flexible rotation up to 9°.
  · Securely clamps with surface part of ball with reverse prevention mechanism.
  · Nominal designation of screw thread / length / surface treatment etc., custom specifications can also be produced.
  · Contact customer service.

  CAD ：

  2D / 3D

  Standard Price:	131,481 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Ball Cap Screw (BCR, BCF)

  IMAO CORPORATION

  Main body available in steel or stainless steel, with balls available in full and half ball types (steel only). Screw sizes from M6 -M16 available.

  CAD ：

  2D / 3D

  Standard Price:	77,441 IDR-
  	Special Price
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Ball Screw (BSR, BSF)

  IMAO CORPORATION

  Main body available in steel or stainless steel, with full and half ball types available. Thread sizes from M4 -M16 available.

  CAD ：

  2D / 3D

  Standard Price:	56,990 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Clamping Screws - Non-Reverse Type

  MISUMI

  - MISUMI offers the HFMB/HFUB series of Clamping Screws with a Non-Reverse Type.
  - The main body of the clamping ball screw is made of SCM435 equivalent (HFMB) or SUS304 equivalent (HFUB).
  - The ball of the clamping screw is made of SUJ2 Equivalent with a hardness of 55-60HRC (HFMB) or SUS440C Equivalent with a hardness of 55-60HRC (HFUB).
  - The screws are available in five sizes: M6, M8, M10, M12, or M16.
  - These screws can be used with commercially available nuts that are equivalent to JIS6g.
  - The maximum slope angle of the tip is 9°.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	103,269 IDR-
  Days to Ship:	14 Day(s) or more

• • On Sale Till 31/03/2025

  

  Clamping Screw SCS-R/SCSS-R

  NABEYA BI-TECH

  [Features]
  · SCS-R main body: steel, ball: steel SCSS-R main body: stainless steel, ball: stainless steel
  · Complete ball point contact ensures workpiece firmly fixed.
  · For tool holder set screw or pressure piece / stopper etc.

  CAD ：

  2D / 3D

  Standard Price:	49,147 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Clamping Screws- Ball

  MISUMI

  - MISUMI RSUC series features ball-tipped clamping screws.
  - The main body of the clamping ball screw is manufactured from SUSXM7.
  - The ball of the clamping screw is composed of Alumina and possesses a hardness of 1100HV.
  - The screw is available in six sizes: M4, M5, M6, M8, M10, or M12.
  - It is compatible with commercially available nuts equivalent to JIS6g standards.
  - This product is designed for workpiece clamping rather than rotating the face balls. (The face balls may not rotate depending on the caulking condition of each face ball.)
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	143,429 IDR-
  Days to Ship:	14 Day(s) or more

• • On Sale Till 31/03/2025

  

  Clamping Screws - Ball

  MISUMI

  - MISUMI HRSUC series offers ball-tipped clamping screws.
  - The main body of the clamping ball screw is constructed from SUSXM7.
  - The ball of the clamping screw is manufactured using Alumina and has a hardness of 1100HV.
  - The screw is available in five sizes: M4, M5, M6, M8, or M10.
  - It is compatible with commercially available nuts that are equivalent to JIS6g standards.
  - This product is designed for workpiece clamping rather than rotating the face balls. (The rotation of the face balls depends on the caulking condition of each face ball.)
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	149,166 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  High Locked Screws-SR Tip Shape

  MISUMI

  "[Features] Although the screw rotates, the screw head contacting a workpiece does not rotate, thus the head will not damage the workpiece."

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	95,619 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Hex Head Clamping Screws - Head Clamp Type - Ball

  MISUMI

  - MISUMI offers the BRSM/BRSMS series of Hex Head Clamping Screws with a Ball Head Clamp Type.
  - The main body of the clamping ball screw is made of SCM435 (BRSM) or SUS304 (BRSMS).
  - The ball of the clamping screw is made of SUJ2 with a hardness of 62HRC or higher (BRSM) or SUS440C with a hardness of 55HRC or higher (BRSMS).
  - The screw is available in five sizes: M6, M8, M10, M12, or M16.
  - This product is designed for clamping works and does not rotate the face balls. The rotation of the face balls depends on the caulking condition of each ball.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	237,135 IDR-
  Days to Ship:	14 Day(s) or more

• • On Sale Till 31/03/2025

  

  Clamping Screw_SCS-F

  NABEYA BI-TECH

  - NBK SCS-F series offers clamping screws of the flat ball type.
  - The workpiece is in contact with a flat ball surface, preventing scratches.
  - The ball rotates flexibly and provides secure clamping, even when the mating part is tilted.
  - These screws are suitable for tool holder set screws, pressure pieces, and stoppers.
  - The main body of the clamping ball screw is constructed from SCM435 with a Ferrosoferric Oxide Film (Black) coating.
  - The ball of the clamping screw is made of SUJ2 and has a hardness of 55-60 HRC.
  - The screw is available in seven sizes: M4, M5, M6, M8, M10, M12, or M16.
  

  CAD ：

  2D / 3D

  Standard Price:	68,240 IDR-
  	Special Price
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  SCB-F/SCBS-F Clamping Bolt

  NABEYA BI-TECH

  [Features]
  · Standardization for all sizes of thread.
  · [SCB-F] Main body: steel, ball: steel [SCBS-F] Main body: stainless steel, ball: stainless steel.
  · Contact surface at horizontal surface of ball.
  · Workpiece is not scratched.
  · Ball has flexible rotation up to 9°
  · Firmly clamps even when corresponding surface is tilted.
  · For tool holder set screw or pressure piece / stopper etc.
  · Nominal designation of screw thread / length / surface treatment etc., custom specifications can also be produced.
  · Contact customer service.

  CAD ：

  2D / 3D

  Standard Price:	76,315 IDR-
  	Special Price
  Days to Ship:	8 Day(s) or more

• 

  SCB-R/CE Clamping Bolt

  NABEYA BI-TECH

  [Features]
  · Standardization for all sizes of thread.
  · [SCB-R] Main body: steel, ball: steel [SCBS-R] Main body: stainless steel, ball: stainless steel [SCBS-CE] Main body: stainless steel, ball: ceramic. Complete ball point contact ensures workpiece firmly fixed.
  · For tool holder set screw or pressure piece / stopper etc.
  · Nominal designation of screw thread / length / surface treatment etc., custom specifications can also be produced.

  CAD ：

  2D / 3D

  Standard Price:	59,075 IDR-
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Ball Screw (Engineering Plastic Full-Ball Type SUS Made) (BSRJ-SUS)

  IMAO CORPORATION

  Full ball type ball screw. Main body is stainless steel for excellent corrosion resistance. Ball material is polyacetal with excellent wear-resistance.

  CAD ：

  2D / 3D

  Standard Price:	140,788 IDR-
  	Special Price
  Days to Ship:	Same day or more

Loading...