Clamping Screws（Material (Tip)：Steel）

• • On Sale Till 31/03/2025

  

  HS/Gripper (Adjust Type) (HS)

  IMAO CORPORATION

  Bolt for attachment of jig, etc. Made of SKH51 with serrations at the tip, it is possible to grip hard workpieces strongly.

  CAD ：

  2D / 3D

  Standard Price:	449,415 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Clamping Screws / High Locked Screws - Non-Reverse Serrated Type

  MISUMI

  - MISUMI offers the FSMG/FSUG series of Clamping Screws / High Locked Screws with a Non-Reverse Serrated Type.
  - The main body of the clamping ball screw is made of SCM435 equivalent (FSMG) or SUS304 equivalent (FSUG).
  - The ball of the clamping screw is made of SUJ2 Equivalent (FSMG) or SUS440C equivalent (FSUG).
  - The screws are available in five sizes: M6, M8, M10, M12, or M16.
  - These screws can be used with commercially available nuts that are equivalent to JIS6g.
  - The maximum slope angle of the tip is 9°.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	135,780 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Clamping screws - Ball type

  MISUMI

  - MISUMI offers the RSM/RSU series of ball tips clamping screws.
  - The main body of the clamping ball screw is made of SCM435 equivalent material for RSM, and SUS304 equivalent material for RSU.
  - The ball of the clamping screw is made of SUJ2 equivalent material for RSM, and SUS440C equivalent material for RSU.
  - The screw is available in eight sizes: M3, M4, M5, M6, M8, M10, M12, or M16.
  - The screw can be used with commercially available nuts that are equivalent to JIS6g.
  - This product is used for clamping workpieces and is not intended to rotate the face balls. The rotation of the face balls depends on the caulking condition of each ball.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	28,686 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Clamping screws - Angle type

  MISUMI

  - MISUMI offers the FSM/FSU series of flat tips clamping screws.
  - The main body of the clamping ball screw is made of SCM435 equivalent material in the case of FSM, and SUS304 equivalent material in the case of FSU.
  - The ball of the clamping screw is made of SUJ2 equivalent material for FSM, and SUS440C equivalent material for FSU.
  - The screw is available in seven sizes: M4, M5, M6, M8, M10, M12, or M16.
  - The screw can be used with commercially available nuts that are equivalent to JIS6g.
  - For the angle type, the face of the screw has a hemisphere appearance due to its rotation, instead of a flat plane.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	26,297 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Clamping Screws / High Locked Screws - Non-Reverse Type

  MISUMI

  - MISUMI offers the FSMB/FSUB series of Clamping Screws / High Locked Screws with a Non-Reverse Type.
  - The main body of the clamping ball screw is made of SCM435 equivalent (FSMB) or SUS304 equivalent (FSUB).
  - The ball of the clamping screw is made of SUJ2 Equivalent (FSMB) or SUS440C equivalent (FSUB).
  - The screws are available in five sizes: M6, M8, M10, M12, or M16.
  - These screws can be used with commercially available nuts that are equivalent to JIS6g.
  - The maximum slope angle of the tip is 9°.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	93,706 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Clamping Screws - Non-Reverse Serrated Type

  MISUMI

  - MISUMI offers the HFMG series of Clamping Screws with a Non-Reverse Serrated Type.
  - The main body of the clamping ball screw is made of SCM435 equivalent (HFMG) and has a black oxide surface treatment.
  - The ball of the clamping screw is made of SUJ2 Equivalent with a hardness of 55-60HRC (HFMG).
  - The screws are available in five sizes: M6, M8, M10, M12, or M16.
  - These screws can be used with commercially available nuts that are equivalent to JIS6g.
  - The maximum slope angle of the tip is 9°.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	135,780 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Clamping Screw, SCS-FB

  NABEYA BI-TECH

  [Features]
  · [SCS-FB] Main body: steel, ball: steel [SCSS-FB] Main body: stainless steel, ball: stainless steel with flexible rotation up to 9°.
  · Securely clamps with surface part of ball with reverse prevention mechanism.
  · Nominal designation of screw thread / length / surface treatment etc., custom specifications can also be produced.
  · Contact customer service.

  CAD ：

  2D / 3D

  Standard Price:	118,064 IDR-
  	Special Price
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Clamping bolts - Ball type

  MISUMI

  - MISUMI offers the HRSM/HRSU series of ball tips clamping screws.
  - The main body of the clamping ball screw is made of SCM435 equivalent material in the case of HRSM, and SUS304 equivalent material in the case of HRSU.
  - The ball of the clamping screw is made of SUJ2 equivalent material for HRSM, and SUS440C equivalent material for HRSU.
  - The screw is available in seven sizes: M4, M5, M6, M8, M10, M12, or M16.
  - The screw can be used with commercially available nuts that are equivalent to JIS6g.
  - This product is designed for clamping workpieces and not for rotating the face balls. The rotation of face balls depends on the caulking condition of each face ball.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	26,773 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Hex Head Clamping Screws - Head Clamp Type - Angle

  MISUMI

  - MISUMI offers the BRSM/BRSMS series of Hex Head Clamping Screws with a Flat Head Clamp Angle Type.
  - The main body of the clamping ball screw is made of SCM435.
  - The ball of the clamping screw is made of SUJ2 with a hardness of 62HRC.
  - The screws are available in five sizes: M6, M8, M10, M12, or M16.
  - For the angle type, a sphere of its hemisphere appears on the face instead of a flat plane due to its rotation.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	139,604 IDR-
  Days to Ship:	14 Day(s) or more

• • On Sale Till 31/03/2025

  

  SCB-FB Clamping Bolt

  NABEYA BI-TECH

  [Features]
  · Standardization for all sizes of thread.
  · Ball has flexible rotation up to 9°
  · Securely clamps with surface part of ball with reverse prevention mechanism.
  · Nominal designation of screw thread / length / surface treatment etc., custom specifications can also be produced.
  · Contact customer service.

  CAD ：

  2D / 3D

  Standard Price:	122,621 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Clamping bolt _SCB-GB/SCBS-GB

  NABEYA BI-TECH

  [Features]
  · Standardization for all sizes of thread.
  · Ball has flexible rotation up to 9°.
  · Securely clamps with reverse prevention mechanism.
  · Notched ball firmly clamps even rough surfaces such as casting surfaces etc.
  · Nominal designation of screw thread / length / surface treatment etc., custom specifications can also be produced.

  CAD ：

  2D / 3D

  Standard Price:	173,811 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Clamping bolts - Angle type

  MISUMI

  - MISUMI offers the HFSM/HFSU series of flat tips clamping screws.
  - The main body of the clamping ball screw is made of SCM435 equivalent material in the case of HFSM, and SUS304 equivalent material in the case of HFSU.
  - The ball of the clamping screw is made of SUJ2 equivalent material for HFSM, and SUS440C equivalent material for HFSU.
  - The screw is available in seven sizes: M4, M5, M6, M8, M10, M12, or M16.
  - The screw is compatible with commercially available nuts that are equivalent to JIS6g.
  - In the case of the Angle Type, a spherical hemisphere appears on the face due to its rotation instead of a flat plane.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	40,160 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Clamping Screw SCS-GB/SCSS-GB

  NABEYA BI-TECH

  The ball is a clamping screw with a jagged ball that rotates flexibly up to 9°.
  [Features]
  ·It is securely clamped by the anti-reverse mechanism.
  ·The jagged ball can be securely clamped even on rough surfaces such as casting surfaces.
  [Applications]
  ·Hold down the workpiece, etc.
  ·For tool holder set screw or pressure piece / stopper, etc.

  CAD ：

  2D / 3D

  Standard Price:	169,663 IDR-
  Days to Ship:	8 Day(s) or more

• • On Sale Till 31/03/2025

  

  Ball Screw (BSR, BSF)

  IMAO CORPORATION

  Main body available in steel or stainless steel, with full and half ball types available. Thread sizes from M4 -M16 available.

  CAD ：

  2D / 3D

  Standard Price:	16,131 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Clamping Screws - Non-Reverse Type

  MISUMI

  - MISUMI offers the HFMB/HFUB series of Clamping Screws with a Non-Reverse Type.
  - The main body of the clamping ball screw is made of SCM435 equivalent (HFMB) or SUS304 equivalent (HFUB).
  - The ball of the clamping screw is made of SUJ2 Equivalent with a hardness of 55-60HRC (HFMB) or SUS440C Equivalent with a hardness of 55-60HRC (HFUB).
  - The screws are available in five sizes: M6, M8, M10, M12, or M16.
  - These screws can be used with commercially available nuts that are equivalent to JIS6g.
  - The maximum slope angle of the tip is 9°.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	93,706 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Hex Head Clamping Screws - Tip Clamp Type - Ball

  MISUMI

  - MISUMI offers the BRASM series of ball tips hex head clamping screws.
  - The main body of the clamping ball screw is made of SCM435 with a hardness of 32 to 40 HRC.
  - The ball of the clamping screw is made of SUJ2 with a hardness of 62 HRC or higher.
  - The screw is available in five sizes: M6, M8, M10, M12, or M16.
  - This product is designed for clamping works and does not rotate the face balls. The rotation of the face balls depends on the caulking condition of each ball.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	91,795 IDR-
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Clamping Screw SCS-R/SCSS-R

  NABEYA BI-TECH

  [Features]
  · SCS-R main body: steel, ball: steel SCSS-R main body: stainless steel, ball: stainless steel
  · Complete ball point contact ensures workpiece firmly fixed.
  · For tool holder set screw or pressure piece / stopper etc.

  CAD ：

  2D / 3D

  Standard Price:	34,154 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Ball Cap Screw (BCR, BCF)

  IMAO CORPORATION

  Main body available in steel or stainless steel, with balls available in full and half ball types (steel only). Screw sizes from M6 -M16 available.

  CAD ：

  2D / 3D

  Standard Price:	29,827 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  Ball End Bolt (BJ730)

  IMAO CORPORATION

  - The BJ730 series, manufactured by IMAO CORPORATION, consists of ball end bolts.
  - The main body of the clamping screw is made of S45C steel and undergoes hardening and tempering. For the Flat type, it is coated with black oxide, while for the Serrated type, SCM435 steel is used.
  - The tip part of the clamping screw is made of SUJ2 steel, with a hardness ranging from HRC56 to 67 for the Flat type and HRC50 to 55 for the Serrated type.
  - The clamping screw is available in two lengths: 25mm and 50mm.
  

  CAD ：

  2D / 3D

  Standard Price:	169,518 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  Workpiece Grip Ball Unit (Bolt Type), BUH

  IMAO CORPORATION

  - Workpiece Grip Ball Unit (Bolt Type), BUH series from IMAO CORPORATION.
  - The BUH series features hex-head swivel gripper screws.
  - The main body of the clamping screw is made of steel (SCM440) and undergoes quenching and tempering. It is finished with a black oxide coating.
  - There are three types of tips available for the clamping screw: serrated tips (BUH-S), plain tips (BUH-F), and polyacetal plastic plain tips (BUH-E).
  - The maximum slope angle of the tip is 10°.
  - The screw is available in two sizes: M6 x 1.0 and M8 x 1.25.
  

  CAD ：

  2D / 3D

  Standard Price:	942,795 IDR-
  Days to Ship:	Same day or more

• 

  Hex Head Clamping Screws - Tip Clamp Type - Angle

  MISUMI

  - MISUMI offers the BFASM series of flat tips angle type hex head clamping screws.
  - The main body of the clamping ball screw is made of SCM435.
  - The ball of the clamping screw is made of SUJ2 with a hardness of 62HRC or higher.
  - The screw is available in five sizes: M6, M8, M10, M12, or M16.
  - For the Angle Type, a sphere of its hemisphere appears on the face instead of a flat plane during rotation.
  - The maximum slope angle of the screw tip is 13°.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	118,568 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Hex Head Clamping Screws - Head Clamp Type - Ball

  MISUMI

  - MISUMI offers the BRSM/BRSMS series of Hex Head Clamping Screws with a Ball Head Clamp Type.
  - The main body of the clamping ball screw is made of SCM435 (BRSM) or SUS304 (BRSMS).
  - The ball of the clamping screw is made of SUJ2 with a hardness of 62HRC or higher (BRSM) or SUS440C with a hardness of 55HRC or higher (BRSMS).
  - The screw is available in five sizes: M6, M8, M10, M12, or M16.
  - This product is designed for clamping works and does not rotate the face balls. The rotation of the face balls depends on the caulking condition of each ball.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	116,655 IDR-
  Days to Ship:	14 Day(s) or more

• • On Sale Till 31/03/2025

  

  Clamping Screw_SCS-F

  NABEYA BI-TECH

  - NBK SCS-F series offers clamping screws of the flat ball type.
  - The workpiece is in contact with a flat ball surface, preventing scratches.
  - The ball rotates flexibly and provides secure clamping, even when the mating part is tilted.
  - These screws are suitable for tool holder set screws, pressure pieces, and stoppers.
  - The main body of the clamping ball screw is constructed from SCM435 with a Ferrosoferric Oxide Film (Black) coating.
  - The ball of the clamping screw is made of SUJ2 and has a hardness of 55-60 HRC.
  - The screw is available in seven sizes: M4, M5, M6, M8, M10, M12, or M16.
  

  CAD ：

  2D / 3D

  Standard Price:	47,296 IDR-
  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 31/03/2025

  

  SCB-F/SCBS-F Clamping Bolt

  NABEYA BI-TECH

  [Features]
  · Standardization for all sizes of thread.
  · [SCB-F] Main body: steel, ball: steel [SCBS-F] Main body: stainless steel, ball: stainless steel.
  · Contact surface at horizontal surface of ball.
  · Workpiece is not scratched.
  · Ball has flexible rotation up to 9°
  · Firmly clamps even when corresponding surface is tilted.
  · For tool holder set screw or pressure piece / stopper etc.
  · Nominal designation of screw thread / length / surface treatment etc., custom specifications can also be produced.
  · Contact customer service.

  CAD ：

  2D / 3D

  Standard Price:	49,483 IDR-
  	Special Price
  Days to Ship:	Same day or more

• 

  SCB-R/CE Clamping Bolt

  NABEYA BI-TECH

  [Features]
  · Standardization for all sizes of thread.
  · [SCB-R] Main body: steel, ball: steel [SCBS-R] Main body: stainless steel, ball: stainless steel [SCBS-CE] Main body: stainless steel, ball: ceramic. Complete ball point contact ensures workpiece firmly fixed.
  · For tool holder set screw or pressure piece / stopper etc.
  · Nominal designation of screw thread / length / surface treatment etc., custom specifications can also be produced.

  CAD ：

  2D / 3D

  Standard Price:	36,402 IDR-
  Days to Ship:	8 Day(s) or more

Loading...