(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 9/2/2025 sampai dengan 6:00 pada tanggal 10/2/2025. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 9/2/2025 to 6:00 (WIB) 10/2/2025. We apologize for the inconvenience. - Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
Locating Pins（Heat Treatment：Directly Quenching）
Basic Shape
-
Large Head -
Small Head -
Straight / Air Vent -
Shouldered -
Screw Mounted -
Flanged -
Double-Stepped -
IKOU
-
Straight
-
- On Sale Till 31/03/2025
- Recommendation
Locating Pins - Straight, Tapered
MISUMI
This Straight, Press Fit Type product archives a short lead time and low price by narrowing the size and tolerance for specific applications.
- Volume Discount
Standard Price: 14,768 IDR- Special Price Days to Ship: Same day -
- Recommendation
Large Head Locating Pins - Spherical
MISUMI
- Large Head Locating Pins – Spherical tip type, C-JPQB / C-JPQD series from MISUMI.
- Standard type with spherical head. Rod diameter tolerance that can be specified for the press-fit part and lead-in part: m6, p6.
- The mounting method is press-fit type, which is simple and convenient.
- Optional Material: Iron (SKS3); Stainless Steel (SUS304, SUS440C), suitable for positioning of a variety of workpieces.
- SUS304 Material, effectively ensuring anti-rust.
- The lead-in part of the sphere can make the workpiece lead in by sliding sideways, without damage.- Volume Discount
Standard Price: 32,070 IDR- Days to Ship: Same day -
Large Head Locating Pins - Tapered
MISUMI
- Large Head Locating Pins – Tapered tip type C-JPBB / C-JPDB series from MISUMI.
- This is an economy item; The price is cheaper than the MISUMI standard product.
- Standard type with tapered lead-in part. Press-fit use, the tolerance of the press-fit part can be specified: m6, p6, g6.
- The head is available in round and polygonal types. The fixed type is cheap, and the freely specified type is rich in specifications.
- Optional Material: Iron (SKS3); Stainless Steel (SUS304, SUS440C), suitable for positioning of a variety of workpieces.
- Hard chrome plated surface, effectively ensuring surface hardness and antirust.- Volume Discount
Standard Price: 26,650 IDR- Days to Ship: Same day -
Days to Ship: 11 Day(s) -
- On Sale Till 31/03/2025
Locating Pins - Large Head, Tapered (Press Fit)
MISUMI
- Locating Pins - Large Head, Tapered (Press Fit) from MISUMI.
- Tapered Head Standard Type. Press Fit. Economical and there is a variety of selections to choose from. Same day shipping available.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The insertion guide is applicable to tolerance p6 only.- Volume Discount
Special Price Days to Ship: Same day or more -
Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit)
MISUMI
Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.
Days to Ship: 11 Day(s) or more -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded)
MISUMI
- Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded) from MISUMI.
- SUS440C or 13Cr stainless has an identification groove on D part.
- A machining step remains on the shoulder top for Diamond Shape.
- SUS304 may not be polished and may have no centering hole.
- You can specify shoulder type flange thickness and flange diameter. It is attached with a male thread.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 11 Day(s) or more -
Locating Pins - Tip Shape Selectable (Tip Length Configurable-Threaded)
MISUMI
While it has the same shape as conventional Tip Shape Selectable Type (Shapes A and C only), its configurable range is different therefrom. Overall length of insertion guide, R length and tapered section length are configurable.
Days to Ship: 10 Day(s) or more -
- On Sale Till 31/03/2025
Small Diameter Locating Pin - Straight / Small Head
MISUMI
- Small Diameter Locating Pin - Straight / Small Head from MISUMI.
- Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
- The material of locating pin can be selected 5 types, Steel SKD61, Steel SK95(SK4), Stainless Steel SUS304, Stainless Steel SUS304 Equivalent, Stainless Steel SUS440C or 13Cr.
- The outer diameter of the locating pin can be configurable up to 3 mm.
- SUS304 may not be polished.- Volume Discount
Special Price Days to Ship: 8 Day(s) or more -
Locating Pins - Large Head, Tapered (Threaded)
MISUMI
- Locating Pins - Large Head, Tapered (Threaded) from MISUMI.
- Large Head, Tapered, Press Fit + Lock Nut Shape. Improved maintainability compared to Press Fit Type.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole sometimes not available for SUS304.
- Provided 2 options of alteration, Wrench Hole Machining (LAC), or Wrench Flats (SC).- Volume Discount
Days to Ship: 11 Day(s) or more -
Height Adjusting Pins - Counterbored
MISUMI
- Height Adjusting Pins – Counterbored from MISUMI.
- Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Hard Chrome Plating products are not available in Precision Grade Tolerance.Days to Ship: 3 Day(s) or more -
Locating Pins - Large/Small Head, Tapered (Set Screw-Set Screw Flat Shape)
MISUMI
- Locating Pins - Large/Small Head, Tapered (Set Screw-Set Screw Flat Shape) from MISUMI.
- Large Head/Small Head, Tapered, Set Screw Type. Selectable from Circumference Groove, Notched and Set Screw Flat Shapes.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- SUS304 may not be polished and may have no centering hole.Days to Ship: 11 Day(s) or more -
Feed Pins - Shouldered - Threaded
MISUMI
Locating Pins with the tapered part configurable to be longer. The Shoulder supports the workpiece so that it will not damage the base.
Days to Ship: 10 Day(s) or more -
Locating Pins - Sphere Large Head (Press Fit)
MISUMI
- Locating Pins - Sphere Large Head (Press Fit) from MISUMI.
- The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Insertion guide tip shape can be selected 2 types, round, and diamond.- Volume Discount
Days to Ship: Same day or more -
Locating Pins - Sphere Large Head (Tapped)
MISUMI
- Locating Pins - Sphere Large Head (Tapped) from MISUMI.
- Sphere Large Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The spherical head may be polished.- Volume Discount
Days to Ship: 11 Day(s) or more -
Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded)
MISUMI
- Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded) from MISUMI.
- The tip shape and the fixed shape of the Shouldered type are selectable from three types respectively.
- The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS304 may not be polished and may have no centering hole.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- A machining step remains on the shoulder top for Diamond shape.Days to Ship: 10 Day(s) or more -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
Locating Pins - Tip Shape Selectable (Full Threaded)
MISUMI
- Locating Pins - Tip Shape Selectable (Full Threaded) from MISUMI.
- Screw-fitting type without pilot. Costs for hole machining on fixtures can be reduced.
- The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
- Provided 3 options for alteration, Wrench flat, Wrench hole (φ3.5 mm) or Hex socket machining.
- Any alteration cannot be combined with the other alteration.Days to Ship: 10 Day(s) or more -
Locating Pins - Small Head, Round Tapered - Press Fit
MISUMI
- Locating Pins - Small Head, Round Tapered - Press Fit from MISUMI.
- Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.Days to Ship: 9 Day(s) or more -
- On Sale Till 31/03/2025
Locating Pins - Large Head, Tapered (Tapped)
MISUMI
- Locating Pins - Large Head, Tapered (Tapped) from MISUMI.
- Large Head, Tapered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Insertion guide tip shape can be selected 2 types, round, and diamond.- Volume Discount
Special Price Days to Ship: Same day or more -
Locating Pins - Large Head, Tapered - Screw Mounted, Standard / Compact
MISUMI
- Locating Pins - Large Head, Tapered - Screw Mounted, Standard / Compact from MISUMI.
- Large Head, Tapered. The hollow area is a screw hole. Improved maintainability compared to the press fit type.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 11 Day(s) or more -
MISUMI
"The pin body is secured by the bolts. Can be used even on portions where the tapped screws cannot be used, because the bolt can be tightened from the top of the insertion guide."
Days to Ship: 9 Day(s) or more -
Locating Pins - Large Flat Head (Press Fit)
MISUMI
- Locating Pins - Large Flat Head (Press Fit) from MISUMI.
- Flat Head Type. Suitable if the mating side has limited space.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polished, centering hole is may not available for SUS304.
- The material of locating pin can be selected 3 types, SKS3 Equivalent, SUS304, SUS440C or 13Cr stainless.
- The insertion guide is applicable to tolerance p6 only.
- The tolerance of locating pin head is h6.- Volume Discount
Days to Ship: 9 Day(s) or more -
Locating Pins - Large Screw Mounted
MISUMI
"The pin body is secured by the bolts. Can be used even on portions where the tapped screws cannot be used, because the bolt can be tightened from the top of the insertion guide."
Days to Ship: 9 Day(s) or more -
Days to Ship: 11 Day(s) -
Locating Pins - Sphere Large Head (Threaded)
MISUMI
- Locating Pins - Sphere Large Head (Threaded) from MISUMI.
- Sphere Large Head, Threaded + Lock Nut Type. Improved maintainability compared to Press Fit Type.
- Polished, Centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
- Provided 3 options of alteration, Sphere tip (RC), Wrench Hole Machining (LAC), or Wrench Flats (SC).- Volume Discount
Days to Ship: 11 Day(s) or more -
Locating Pins - Straight, Sphere (Tapped)
MISUMI
- Locating Pins - Straight, Sphere (Tapped) from MISUMI.
- The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- When the D dimension is small, a centering hole will cause the sphere section to become small.
- On some combination of dimensions, the center hole may not be available.
- Polishing and centering hole is sometimes not available for SUS304.Days to Ship: 11 Day(s) or more -
- On Sale Till 31/03/2025
Locating Pins - Air Vent (Tapped)
MISUMI
- Locating Pins - Air Vent (Tapped) from MISUMI.
- Since there is an air groove, it is easy to insert a pin. It is attached with a female thread.
- The material of pin can be selected 3 types, SUJ2 or SUS304 Equivalent, SUS440C or 13Cr stainless.
- Mounting method can be selected 2 types, Thread or Tapped.
- The outer diameter of pin can be selected 5 sizes, 5, 6, 8, 10, and 12 mm.
- The tolerance of outer diameter is g6.- Volume Discount
Standard Price: 28,686 IDR- Special Price Days to Ship: Same day or more -
- On Sale Till 31/03/2025
Locating Pins - Small Head, Tapered (Tapped)
MISUMI
- Locating Pins - Small Head, Tapered (Tapped) from MISUMI.
- Small Head, Tapered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Insertion guide tip shape can be selected 2 types, round, and diamond.- Volume Discount
Special Price Days to Ship: 3 Day(s) or more -
Locating Pins - Large Head, Bullet Nose, Compact - Threaded
MISUMI
- Locating Pins - Large Head, Bullet Nose, Compact – Threaded from MISUMI.
- R shape at insertion guide enables smooth insertion of workpiece. Compact Type with specifiable shorter L dimension.
- Polished, centering hole is may not be on all SUS304 Pins.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 10 Day(s) or more -
Days to Ship: 11 Day(s) -
Locating Pins - Tip Shape Selectable (Threaded)
MISUMI
- Locating Pins - tip shape selectable (Threaded) from MISUMI.
- Insertion guide tip type can be selected 3 types, Tapered, Taper R, and Spherical.
- Insertion guide tip shape can be selected 2 types, round, and diamond.
- The material of locating pin can be selected 4 types, SKS3 Equivalent, S45C Equivalent, SUS304, SUS440C or 13Cr stainless.
- A fully threaded type of L=0 without pivot is also available.
- Polished, centering hole is may not available for SUS304.Days to Ship: 10 Day(s) or more -
Locating Pins - Large/Small Head, Tapered (Set Screw-Circumference Groove Shape)
MISUMI
- Locating Pins - Large/Small Head, Tapered (Set Screw-Circumference Groove Shape) from MISUMI.
- Large Head/Small Head, Tapered, Set Screw Type. Selectable from Circumference Groove, Notched and Set Screw Flat Shapes.
- Insertion guide tip shape can be selected 2 types, round, and diamond.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- SUS304 may not be polished and may have no centering hole.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.Days to Ship: 11 Day(s) or more -
Locating Pins - Air Vent (Threaded)
MISUMI
[Features]Since there is an air groove, it is easy to insert a pin. It is attached with a male thread.
- Volume Discount
Standard Price: 55,460 IDR- Days to Ship: Same day or more -
Days to Ship: 11 Day(s) -
Days to Ship: 11 Day(s) -
- On Sale Till 31/03/2025
Locating Pins - Small Head, Tapered (Press Fit)
MISUMI
- Locating Pins - Small Head, Tapered (Press Fit) from MISUMI.
- Tapered Head Standard Type. Press Fit. Economical and there is a variety of selections to choose from. Same day shipping available.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- The insertion guide is applicable to both the tolerance m6 and p6.- Volume Discount
Special Price Days to Ship: Same day or more -
Locating Pins - Sphere Small Head (Press Fit)
MISUMI
- Locating Pins - Sphere Small Head (Press Fit) from MISUMI.
- The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Insertion guide tip shape can be selected 2 types, round, and diamond.- Volume Discount
Days to Ship: 8 Day(s) or more -
Locating Pins Double Stepped - Tapped
MISUMI
[Features]Suitable for positioning workpieces with different hole diameters. It is attached with a female thread.
Days to Ship: 10 Day(s) or more -
Days to Ship: 11 Day(s) -
Locating Pins - Tip Shape Selectable (Straight Tapped)
MISUMI
- Locating Pins - Tip Shape Selectable (Straight Tapped) from MISUMI.
- The tip shape is selectable from three types. To be mounted from back using bolts. Improved maintainability compared to the press fit type.
- The material of locating pin can be selected 4 types, S45C Equivalent, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless of round type and diamond type has an identification groove at any position on D part.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.Days to Ship: 10 Day(s) or more -
Locating Pins - Small Head, Round Tapered - Tapped
MISUMI
- Locating Pins - Small Head, Round Tapered – Tapped from MISUMI.
- Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished and centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.Days to Ship: 11 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Basic Shape |
| Environmentally friendly |
| Characteristics/Applications |
| Insertion Guide Tip Shape |
| Insertion Guide Tip Type |
| Insertion Guide Specifications |
| Mounting Side Shape |
| Surface Treatment |
| Heat Treatment |
| Material |
| Insertion Guide Outer Dia. D1(mm) |
| Insertion Guide Tolerance |
| Mounting Side Outer Dia. d(mm) |
| Mounting Side Tolerance |
| Cleaning Method |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit) | Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded) | Locating Pins - Tip Shape Selectable (Tip Length Configurable-Threaded) | Locating Pins - Large/Small Head, Tapered (Set Screw-Set Screw Flat Shape) | Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded) | Locating Pins - Large Head, Tapered - Screw Mounted, Standard / Compact | Locating Pins Large Head, Tapered, Configurable - Taper Angle, Tolerance Selectable, Press Fit | Locating Pins - Large/Small Head, Tapered (Set Screw-Circumference Groove Shape) | |||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | Same day | Same day | Same day | 11 Day(s) | Same day or more | 11 Day(s) or more | 11 Day(s) | 11 Day(s) | 11 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 11 Day(s) or more | 3 Day(s) or more | 11 Day(s) or more | 10 Day(s) or more | Same day or more | 11 Day(s) or more | 10 Day(s) or more | 11 Day(s) | 11 Day(s) | 10 Day(s) or more | 9 Day(s) or more | Same day or more | 11 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 11 Day(s) | 11 Day(s) or more | 11 Day(s) or more | Same day or more | 3 Day(s) or more | 10 Day(s) or more | 11 Day(s) | 10 Day(s) or more | 11 Day(s) or more | Same day or more | 11 Day(s) | 11 Day(s) | Same day or more | 8 Day(s) or more | 10 Day(s) or more | 11 Day(s) | 10 Day(s) or more | 11 Day(s) or more |
| Basic Shape | Straight / Air Vent | Large Head | Large Head | Straight / Air Vent | Large Head | Small Head | Large Head / Straight / Air Vent | Large Head / Small Head / Shouldered | Shouldered | Large Head | Straight / Air Vent | Large Head | Small Head | Large Head / Small Head | Shouldered | Large Head | Large Head | Shouldered | Screw Mounted | Straight / Air Vent / IKOU | Large Head | Large Head | Large Head | Large Head | Screw Mounted | Large Head | Screw Mounted | Large Head | Large Head | Straight / Air Vent | Straight / Air Vent | Small Head | Large Head | Large Head | Large Head | Large Head / Small Head | Straight / Air Vent | Large Head | Large Head | Small Head | Small Head | Double-Stepped | Large Head | Large Head / Straight | Large Head |
| Environmentally friendly | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Characteristics/Applications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Insertion Guide Tip Shape | Round | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round / Diamond | Round / Diamond | Round / Diamond | Round / Diamond | Round | Round | Round / Diamond | Round / Diamond |
| Insertion Guide Tip Type | - | Spherical | Tapered | Spherical | Tapered | Spherical | Tapered / Taper R / R | Tapered | Tapered | Taper R / R | Tapered / Taper R / Spherical / Flat | Tapered | Tapered | Tapered | Tapered | Spherical | Spherical | Tapered / Taper R / R | Tapered | Tapered | Tapered / Taper R / R | Tapered | Tapered | Tapered | Tapered | Flat | Tapered | Tapered | Spherical | Spherical | Tapered | Tapered | Bullet Nose | Spherical | Tapered / Taper R / R | Tapered | Tapered | Tapered | Tapered | Tapered | Spherical | Tapered | Taper R | Tapered / Taper R / R | Tapered |
| Insertion Guide Specifications | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | With Screw Mount Hole | Not Provided | Not Provided | Not Provided | Not Provided | With Screw Mount Hole | With Screw Mount Hole | Not Provided | With Screw Mount Hole | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Mounting Side Shape | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Tapped | Straight (Press-Fit) | Straight (Press-Fit) | Tapped | Straight (Press-Fit) / Tapped / Threaded | Threaded | Threaded | Straight (Press-Fit) | Threaded | Tapped | Set Screw Flat | Threaded | Straight (Press-Fit) | Tapped | Straight (Press-Fit) / Tapped / Threaded | Straight (Press-Fit) | Tapped | Threaded | Straight (Press-Fit) | Tapped | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Straight (Press-Fit) | Threaded | Tapped | Tapped | Tapped | Threaded | Tapped | Threaded | Circumference Groove | Threaded | Tapped | Threaded | Straight (Press-Fit) | Straight (Press-Fit) | Tapped | Tapped | Tapped | Tapped |
| Surface Treatment | Not Provided | Not Provided | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating | Not Provided / Hard Chrome Plating / Buffed / Hard Chrome Plating + Buffed | Not Provided | Not Provided / Buffed / Hard Chrome Plating + Buffed | Not Provided / Black Oxide / Hard Chrome Plating | Not Provided / Hard Chrome Plating |
| Heat Treatment | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching | Directly Quenching |
| Material | - | Steel | Steel | - | Steel / Stainless Steel | Steel / Stainless Steel | - | - | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | - | - | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | - | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | - | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | - | - | Steel / Stainless Steel | Steel / Stainless Steel | Steel | - | Steel / Stainless Steel | Steel / Stainless Steel |
| Insertion Guide Outer Dia. D1(mm) | 3 ～ 10 | 3 ～ 12 | 3 ～ 12 | 5 ～ 10 | 1.2 ～ 30 | 1 ～ 20 | 6 ～ 35 | 1 ～ 20 | 2 ～ 20 | 4 ～ 30 | 1 ～ 3 | 3.5 ～ 30 | 3 ～ 20 | 5 ～ 30 | 2 ～ 11 | 1.5 ～ 30 | 5.5 ～ 30 | 2.5 ～ 22 | 11 ～ 25 | 5 ～ 10 | 3.5 ～ 30 | 1 ～ 30 | 5.5 ～ 30 | 11 ～ 30 | 11 ～ 25 | 1.5 ～ 30 | 22 ～ 80 | 2 ～ 30 | 3.5 ～ 30 | 5 ～ 10 | 5 ～ 12 | 3 ～ 20 | 3.5 ～ 15 | 5.5 ～ 30 | 4 ～ 30 | 2 ～ 30 | 5 ～ 12 | 5.5 ～ 30 | 3.5 ～ 30 | 1 ～ 20 | 1 ～ 20 | 6 ～ 30 | 8 ～ 30 | 6 ～ 35 | 5 ～ 30 |
| Insertion Guide Tolerance | g6 ～ m6 | -0.01/-0.02 | -0.01/-0.02 | h7 | 0/-0.01 | 0/-0.01 ～ h7 | 0/-0.02 | 0/-0.02 | 0/-0.01 | 0/-0.01 | 0/-0.01 ～ 0.005/0 | 0/-0.01 | 0/-0.01 ～ h7 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.02 | - | 0/-0.1 | 0/-0.01 ～ h7 | 0/-0.01 | 0/-0.01 | 0/-0.01 | h6 | 0/-0.05 | - | 0/-0.01 | g6 ～ h7 | g6 | 0/-0.01 | 0/-0.01 | 0/-0.02 | 0/-0.01 | 0/-0.01 | g6 | 0/-0.02 | 0/-0.02 | 0/-0.01 | 0/-0.01 | 0/-0.01 | 0/-0.02 | 0/-0.01 | 0/-0.01 ～ h7 |
| Mounting Side Outer Dia. d(mm) | 3 ～ 8 | 2 ～ 10 | 2 ～ 10 | 5 ～ 10 | 1 ～ 20 | 2 ～ 20 | 6 ～ 20T | 2 ～ 20 | 3 ～ 20 | 3 ～ 20 | 0.5 ～ 3 | 3 ～ 20 | 5 ～ 20 | 6 ～ 20 | 3 ～ 10 | 1 ～ 20 | 5 ～ 20T | 2 ～ 20 | - | 5 ～ 10 | - | 1 ～ 20 | 5 ～ 20T | 10 ～ 20 | - | 1 ～ 20 | 16 ～ 30 | 2 ～ 20 | 3 ～ 20 | 5 ～ 10 | 5 ～ 12 | 5 ～ 20T | 3 ～ 10 | 5 ～ 20T | 3 ～ 20 | 6 ～ 20 | 3 ～ 6 | 5 ～ 20T | 3 ～ 20 | 2 ～ 20 | 2 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20T | 5 ～ 20T |
| Mounting Side Tolerance | - | m6 | m6 | h7 | g6 ～ p6 | 0/-0.005 ～ h7 | - | - | g6 | g6 | 0/-0.01 ～ 0.005/0 | g6 | g6 ～ h7 | g6 | g6 | m6 ～ p6 | g6 | g6 ～ m6 | 0/-0.02 | - | - | 0/-0.005 ～ h7 | g6 | g6 | 0/-0.01 | m6 ～ p6 | g6 | - | g6 | g6 ～ h7 | g6 | g6 | g6 | - | g6 | g6 | g6 | - | - | m6 ～ p6 | m6 ～ p6 | g6 | - | g6 | g6 ～ h7 |
| Cleaning Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Environmentally friendly
-
Characteristics/Applications
-
Insertion Guide Tip Shape
-
Round -
Diamond -
Square Head -
Triangle
-
-
Insertion Guide Tip Type
-
Tapered -
Round Tapered -
Taper R -
R -
Spherical -
Flat -
Ball End -
Bullet Nose
-
-
Insertion Guide Specifications
-
Not Provided -
With Screw Mount Hole -
With Hex Socket -
With Flathead Slot -
Tapped
-
-
Mounting Side Shape
-
Straight (Press-Fit) -
Tapped -
Threaded -
Circumference Groove -
Notch -
Set Screw Flat
-
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
- Buffed
- Hard Chrome Plating + Buffed
- Anodize
- Polishing
- Isonite Treatment
-
Heat Treatment
- Not Provided
- Carburized
- Directly Quenching
-
Material
- Steel
- Stainless Steel
- Resin
- Aluminum
-
Insertion Guide Outer Dia. D1(mm)
-
Insertion Guide Tolerance
-
Mounting Side Outer Dia. d(mm)
-
Mounting Side Tolerance
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 2 Day(s) or Less
- 3 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
- 12 Day(s) or Less
- 13 Day(s) or Less
- 14 Day(s) or Less
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy