Locating Pins（Material：Steel）

• • Recommendation

  

  MiSUMi Economy

  Large Head Locating Pins - Spherical

  MISUMI

  - Large Head Locating Pins – Spherical tip type, C-JPQB / C-JPQD series from MISUMI.
  - Standard type with spherical head. Rod diameter tolerance that can be specified for the press-fit part and lead-in part: m6, p6.
  - The mounting method is press-fit type, which is simple and convenient.
  - Optional Material: Iron (SKS3); Stainless Steel (SUS304, SUS440C), suitable for positioning of a variety of workpieces.
  - SUS304 Material, effectively ensuring anti-rust.
  - The lead-in part of the sphere can make the workpiece lead in by sliding sideways, without damage.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	32,070 IDR-
  Days to Ship:	Same day

• 

  MiSUMi Economy

  Large Head Locating Pins - Tapered

  MISUMI

  - Large Head Locating Pins – Tapered tip type C-JPBB / C-JPDB series from MISUMI.
  - This is an economy item; The price is cheaper than the MISUMI standard product.
  - Standard type with tapered lead-in part. Press-fit use, the tolerance of the press-fit part can be specified: m6, p6, g6.
  - The head is available in round and polygonal types. The fixed type is cheap, and the freely specified type is rich in specifications.
  - Optional Material: Iron (SKS3); Stainless Steel (SUS304, SUS440C), suitable for positioning of a variety of workpieces.
  - Hard chrome plated surface, effectively ensuring surface hardness and antirust.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	26,650 IDR-
  Days to Ship:	Same day

• 

  Locating Pins - Large Head, Tapered (Press Fit)

  MISUMI

  - Locating Pins - Large Head, Tapered (Press Fit) from MISUMI.
  - Tapered Head Standard Type. Press Fit. Economical and there is a variety of selections to choose from. Same day shipping available.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The insertion guide is applicable to tolerance p6 only.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Height Adjusting Pins - Counterbored

  MISUMI

  - Height Adjusting Pins – Counterbored from MISUMI.
  - Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Hard Chrome Plating products are not available in Precision Grade Tolerance.
  

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Large Head, Tapered (Tapped)

  MISUMI

  - Locating Pins - Large Head, Tapered (Tapped) from MISUMI.
  - Large Head, Tapered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Locating Pins - Large Flat Head (Press Fit)

  MISUMI

  - Locating Pins - Large Flat Head (Press Fit) from MISUMI.
  - Flat Head Type. Suitable if the mating side has limited space.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polished, centering hole is may not available for SUS304.
  - The material of locating pin can be selected 3 types, SKS3 Equivalent, SUS304, SUS440C or 13Cr stainless.
  - The insertion guide is applicable to tolerance p6 only.
  - The tolerance of locating pin head is h6.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Small Diameter Locating Pin - Straight / Small Head

  MISUMI

  - Small Diameter Locating Pin - Straight / Small Head from MISUMI.
  - Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
  - The material of locating pin can be selected 5 types, Steel SKD61, Steel SK95(SK4), Stainless Steel SUS304, Stainless Steel SUS304 Equivalent, Stainless Steel SUS440C or 13Cr.
  - The outer diameter of the locating pin can be configurable up to 3 mm.
  - SUS304 may not be polished.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Locating Pins - Large Head, Tapered - Screw Mounted, Standard / Compact

  MISUMI

  - Locating Pins - Large Head, Tapered - Screw Mounted, Standard / Compact from MISUMI.
  - Large Head, Tapered. The hollow area is a screw hole. Improved maintainability compared to the press fit type.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Straight Tapped)

  MISUMI

  - Locating Pins - Tip Shape Selectable (Straight Tapped) from MISUMI.
  - The tip shape is selectable from three types. To be mounted from back using bolts. Improved maintainability compared to the press fit type.
  - The material of locating pin can be selected 4 types, S45C Equivalent, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless of round type and diamond type has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Large Head, Bullet Nose, Compact - Threaded

  MISUMI

  - Locating Pins - Large Head, Bullet Nose, Compact – Threaded from MISUMI.
  - R shape at insertion guide enables smooth insertion of workpiece. Compact Type with specifiable shorter L dimension.
  - Polished, centering hole is may not be on all SUS304 Pins.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Small Head, Tapered (Tapped)

  MISUMI

  - Locating Pins - Small Head, Tapered (Tapped) from MISUMI.
  - Small Head, Tapered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Threaded)

  MISUMI

  - Locating Pins - tip shape selectable (Threaded) from MISUMI.
  - Insertion guide tip type can be selected 3 types, Tapered, Taper R, and Spherical.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - The material of locating pin can be selected 4 types, SKS3 Equivalent, S45C Equivalent, SUS304, SUS440C or 13Cr stainless.
  - A fully threaded type of L=0 without pivot is also available.
  - Polished, centering hole is may not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Large Head, Tapered (Threaded)

  MISUMI

  - Locating Pins - Large Head, Tapered (Threaded) from MISUMI.
  - Large Head, Tapered, Press Fit + Lock Nut Shape. Improved maintainability compared to Press Fit Type.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 2 options of alteration, Wrench Hole Machining (LAC), or Wrench Flats (SC).
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Large Screw Mounted

  MISUMI

  "The pin body is secured by the bolts. Can be used even on portions where the tapped screws cannot be used, because the bolt can be tightened from the top of the insertion guide."

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Tapered Plunging Locating Pin

  MISUMI

  - Tapered Plunging Locating Pin, PICP series from MISUMI.
  - The tapered section holds a workpiece, which enables positioning without wobbling.
  - The pin of Tapered Plunging Locating Pin, PICP series is made of SKD11 with hardness level at 60～63HRC.
  - The body of Tapered Plunging Locating Pin, PICP series is made of S45C.
  - The spring part of Tapered Plunging Locating Pin, PICP series is made of SWP-B.
  - Variation of PICP series have 2 types available, PICP6 or PICP10.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	937,067 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Locating Pins - Sphere Large Head (Press Fit)

  MISUMI

  - Locating Pins - Sphere Large Head (Press Fit) from MISUMI.
  - The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Locating Pins - Sphere Small Head (Press Fit)

  MISUMI

  - Locating Pins - Sphere Small Head (Press Fit) from MISUMI.
  - The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Press Fit

  MISUMI

  - Locating Pins - Small Head, Round Tapered - Press Fit from MISUMI.
  - Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded)

  MISUMI

  - Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded) from MISUMI.
  - SUS440C or 13Cr stainless has an identification groove on D part.
  - A machining step remains on the shoulder top for Diamond Shape.
  - SUS304 may not be polished and may have no centering hole.
  - You can specify shoulder type flange thickness and flange diameter. It is attached with a male thread.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Air Vent (Tapped)

  MISUMI

  - Locating Pins - Air Vent (Tapped) from MISUMI.
  - Since there is an air groove, it is easy to insert a pin. It is attached with a female thread.
  - The material of pin can be selected 3 types, SUJ2 or SUS304 Equivalent, SUS440C or 13Cr stainless.
  - Mounting method can be selected 2 types, Thread or Tapped.
  - The outer diameter of pin can be selected 5 sizes, 5, 6, 8, 10, and 12 mm.
  - The tolerance of outer diameter is g6.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	28,686 IDR-
  Days to Ship:	Same day or more

• 

  Diamond Pin (BJ723)

  IMAO CORPORATION

  A stepped diamond pin for positioning parts. Main Body: Hardened and tempered and polished finish.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	245,550 IDR-
  Days to Ship:	Same day or more

• 

  Locating Pins - Sphere Small Head (Tapped)

  MISUMI

  - Locating Pins - Sphere Small Head (Tapped) from MISUMI.
  - Sphere Small Head with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The spherical head may be polished.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Tip Length Configurable-Threaded)

  MISUMI

  While it has the same shape as conventional Tip Shape Selectable Type (Shapes A and C only), its configurable range is different therefrom. Overall length of insertion guide, R length and tapered section length are configurable.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Screw Mounted

  MISUMI

  "The pin body is secured by the bolts. Can be used even on portions where the tapped screws cannot be used, because the bolt can be tightened from the top of the insertion guide."

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Locating Pins - Small Head, Round Tapered - Tapped

  MISUMI

  - Locating Pins - Small Head, Round Tapered – Tapped from MISUMI.
  - Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished and centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit)

  MISUMI

  Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Straight, Sphere (Press Fit)

  MISUMI

  - Locating Pins - Straight, Sphere (Press Fit) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - When the D dimension is small, a centering hole will cause the sphere section to become small.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Air Vent (Threaded)

  MISUMI

  [Features]Since there is an air groove, it is easy to insert a pin. It is attached with a male thread.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	55,460 IDR-
  Days to Ship:	Same day or more

• 

  Locating Pins - Small Flat Head (Press Fit)

  MISUMI

  Flat Head Type. Suitable if the mating side has limited space.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Shouldered (Tapered, Tapped)

  MISUMI

  - Locating Pins - Shouldered (Tapered, Tapped) from MISUMI.
  - Shouldered with the shape designed to be mounted from back using bolts. Improved maintainability compared to Press Fit Type.
  - The material of locating pin can be selected 2 types, steel SKS3 Equivalent, stainless steel SUS304.
  - A machining step remains on the shoulder top for Diamond shape.
  - SUS304 may not be polished and may have no centering hole.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Press Fit

  MISUMI

  - Locating Pins - Press Fit from MISUMI.
  - Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole sometimes not available for SUS304.
  - Provided 3 options of alteration, Insertion guide (GDC), Air vent (AC), or C Chamfered Size Changes (CN).
  

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Locating Pins - Sphere Large/Small Head (Set Screw-Circumference Groove Shape)

  MISUMI

  - Locating Pins - Sphere Large/Small Head (Set Screw-Circumference Groove Shape) from MISUMI.
  - Large Head/Small Head, Tapered, Set Screw Type. Selectable from Circumference Groove, Notched and Set Screw Flat Shapes.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - When the P dimension is small, a centering hole will cause the sphere section to become small.
  - The spherical head may be polished.
  

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Small Head, Tapered (Press Fit)

  MISUMI

  - Locating Pins - Small Head, Tapered (Press Fit) from MISUMI.
  - Tapered Head Standard Type. Press Fit. Economical and there is a variety of selections to choose from. Same day shipping available.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Polished, centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The insertion guide is applicable to both the tolerance m6 and p6.
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

• 

  Locating Pins - Sphere Large Head (Threaded)

  MISUMI

  - Locating Pins - Sphere Large Head (Threaded) from MISUMI.
  - Sphere Large Head, Threaded + Lock Nut Type. Improved maintainability compared to Press Fit Type.
  - Polished, Centering hole is sometimes not available for SUS304.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  - Provided 3 options of alteration, Sphere tip (RC), Wrench Hole Machining (LAC), or Wrench Flats (SC).
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Shouldered (Tapered, Threaded)

  MISUMI

  Shouldered, Press Fit + Lock Nut Type. Improved maintainability compared to Press Fit Type.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Feed Pins - Shouldered - Press Fit

  MISUMI

  Locating Pins with the tapered part configurable to be longer. The Shoulder supports the workpiece so that it will not damage the base.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Threaded

  MISUMI

  - Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable – Threaded from MISUMI.
  - Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Large Head Tapered (Plastic Tip - Threaded)

  MISUMI

  Plastic material bonded to the tip of insertion guide prevents workpiece from being scratched.

  CAD ：

  2D / 3D

  Days to Ship:	28 Day(s) or more

• 

  Locating Pins - Straight, Tapered (Tapped)

  MISUMI

  - Locating Pins - Straight, Tapered (Tapped) from MISUMI.
  - The short lead time and economical price are achieved by narrowing down the tolerance and dimensions.
  - The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Straight, Sphere (Tapped)

  MISUMI

  - Locating Pins - Straight, Sphere (Tapped) from MISUMI.
  - The sphere head can prevent the mating side from being scratched. Selectable tolerance with each dimension configurable.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - When the D dimension is small, a centering hole will cause the sphere section to become small.
  - On some combination of dimensions, the center hole may not be available.
  - Polishing and centering hole is sometimes not available for SUS304.
  

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Shouldered (Set Screw-Notch Shape)

  MISUMI

  Shouldered Set Screw Type. Selectable from Circumference Groove, Notched and Set Screw Flat Shapes.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s)

• 

  Straight Pin (BJ720)

  IMAO CORPORATION

  Positioning part. A straight pin with high cost-effectiveness. Main Body: hardening and tempering, polishing finish

  CAD ：

  2D / 3D

  Standard Price:	113,189 IDR-
  Days to Ship:	Same day or more

• 

  Spring Pin (High-Accuracy Series) (CP710-A, CP710-B)

  IMAO CORPORATION

  - Spring Pin (High-Accuracy Series) (CP710-A, CP710-B) from IMAO CORPORATION.
  - This product series can be selected into 2 types, CP710-A (Standard type), or CP710-B (Supporter type).
  - The main body of this product is made of S45C Hardening and tempering with Black oxide coating.
  - The pin of this product is made of SK95, Hardening and tempering Heat Treatment.
  - It is optimal for positioning cast holes in die-cast aluminum.
  - The tolerance of mounted side outer diameter g6.
  

  CAD ：

  2D / 3D

  Standard Price:	1,808,258 IDR-
  Days to Ship:	8 Day(s) or more

• 

  One-Touch Flex Locator, Cam Handle Type (Pin)

  IMAO CORPORATION

  - ONE-TOUCH FLEX LOCATOR CLAMPERS (Cam Handle) from IMAO CORPORATION.
  - The shape of tips can be selected 2 types, Tapered pin (CP731-LC), Straight pin (CP731-SC).
  - The body of ONE-TOUCH FLEX LOCATOR CLAMPERS is made of SCM440 steel Nitrocarburized.
  - The Cam Handle of ONE-TOUCH FLEX LOCATOR CLAMPERS is made of SCM440 steel, Black oxide finished, Quenched & tempered.
  - The ball of ONE-TOUCH FLEX LOCATOR CLAMPERS is made of SUJ2 steel.
  - Clamping and unclamping by cam handle.
  

  CAD ：

  2D / 3D

  Standard Price:	3,127,431 IDR
  Days to Ship:	16 Day(s) or more

• 

  Locating Pins - Large Head, Tapered - Threaded, Hex Socket

  MISUMI

  - Locating Pins - Large Head, Tapered - Threaded, Hex Socket from MISUMI.
  - Hex Socket is attached to the tip of Large Head, Tapered, Threaded. It is easy to mount as you can stop the head rotation.
  - The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

Loading...