Locating Pins（Mounting Side Shape：Straight (Press-Fit) Page2）

• 

  Straight Pin (BJ721)

  IMAO CORPORATION

  This is a positioning part, stepped straight pin. Main Body: hardening and tempering, polishing finish

  CAD ：

  2D / 3D

  Standard Price:	208,922 IDR-
  Days to Ship:	Same day or more

• 

  Flex Locater (Taper Pin) CP720

  IMAO CORPORATION

  [Usage]
  · Plate positioning
  [Features]
  · Repeat positioning accuracy is ±10 micron.

  CAD ：

  2D / 3D

  Standard Price:	264,781 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Single-Action Flex Locator (Taper Pin, Straight Pin) (CP722)

  IMAO CORPORATION

  [Usage]
  · Plate positioning
  [Features]
  · Repeat positioning accuracy is ±10 micron.

  CAD ：

  2D / 3D

  Standard Price:	2,069,263 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded)

  MISUMI

  - Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded) from MISUMI.
  - The tip shape and the fixed shape of the Shouldered type are selectable from three types respectively.
  - The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS304 may not be polished and may have no centering hole.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - A machining step remains on the shoulder top for Diamond shape.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Height Adjusting Blocks

  MISUMI

  Seating Sensor Hole Type for confirming workpiece seating is now available.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Day(s) or more

• 

  Flanged Locating Pins - Flange Mounted

  MISUMI

  Locating Pins having the flange shaped for mount. The flange can be fixed with a screw.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Plate Centering Pins

  MISUMI

  - Plate Centering Pins, BCMPA / CMPA / SCMPA series from MISUMI.
  - Suitable for centering thin objects.
  - Can be used for attaching gripper.
  - Center holes may disappear depending on dimension B.
  - The material of pin can be selected 2 types, steel S45C Equivalent or stainless steel SUS304.
  - SUS304 Plate Centering Pins may not be polished and may have no centering hole.
  - When the L dimension of tapped type is less than Mx4, the tapped hole or pilot hole for tapping may go through.
  

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Holders for Locating Pins - Standard

  MISUMI

  Use in combination with Locating Pins Set Screw Type or Internal Thread Type enables locating at higher position.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Holders for Locating Pins - Compact Flange

  MISUMI

  Use in combination with Locating Pins Set Screw Type or Internal Thread Type enables locating at higher position.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Small Diameter Locating Pin - Shouldered, Press Fit

  MISUMI

  - Small Diameter Locating Pin - Shouldered, Press Fit from MISUMI.
  - Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Taper R tip, Spherical tip, and Flat tip.
  - The material of locating pin can be selected 2 types, Steel SK95(SK4) Equivalent, Stainless Steel SUS304.
  - SUS304 may not be polished.
  - The hardness level of SK95 (SK4) Equivalent is 50～58HRC.
  - The outer diameter of the locating pin can be selectable up to 4 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Plastic, Small Diameter

  MISUMI

  - Locating Pins - Plastic, Small Diameter from MISUMI.
  - Having a metal core, it is less prone to be broken when used for side locating.
  - The outer diameter tolerance is the result of measurement at room temperature.
  - Core Rod material of locating pin is made of SUS304.
  - There is a flat part of Ø0.2 or below at the tip of Straight Type, Spherical Type and Small Head Type.
  - MC nylon of flat tip type is not available.
  

  CAD ：

  2D / 3D

  Days to Ship:	26 Day(s) or more

• 

  Locating Pins - Plastic, Screw Mounted

  MISUMI

  [Features]Resin positioning pin that can be bolted. Scratches can be prevented.

  CAD ：

  2D / 3D

  Days to Ship:	25 Day(s) or more

• 

  Locating Pins - Plastic, Small Head

  MISUMI

  - Locating Pins - Plastic, Small Head from MISUMI.
  - A Small Head Plastic Locating Pins which prevent workpiece damages.
  - Insertion guide tip type can be selected 3 types, Tapered, Flat and Spherical.
  - The outer diameter tolerance is the result of measurement at room temperature.
  - The material of locating pin can be selected 4 types, Polyacetal (Black), MC Nylon (Blue), Conductive MC Nylon CDR2 (Black), or PEEK (Natural Ivory).
  - The mounting method is press fit, with m6 tolerance.
  

  CAD ：

  2D / 3D

  Days to Ship:	26 Day(s) or more

• 

  Feed Pins - Solid - Press Fit

  MISUMI

  - Feed Pins - Solid - Press Fit from MISUMI.
  - Length of tapered part can be specified depending on applications or environment. It is installed by press-fitting.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS304 feed Pins may not be polished and may have no centering hole.
  - The outer diameter of the mounting part can be selectable from 2 mm to 10 mm.
  - The outer diameter of the feed pin tip can be selectable from 2.5 mm to 13 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Small Diameter Plunging Locating Pins

  MISUMI

  [Features]Small diameter pin unit in which the spring-retaining pin performs strokes.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Small Diameter Locating Pins - High Hardness Stainless Steel - Solid

  MISUMI

  - Small Diameter Locating Pins - High Hardness Stainless Steel – Solid from MISUMI.
  - Locating Pins for Micromachining less than Ø3. Corrosion-resistant and rigid. Suitable for locating Base, etc.
  - The tip shape is selectable from four types, Flat (SF), Sphere (SP), Taper (ST), or Tapered (SX).
  - Chamfering or tolerance changing of mounting portion is available as alteration.
  - Note that High Hardness Stainless Steel contains Mn and dissolves by acid.
  - High Hardness Stainless Steel is weakly magnetic.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Small Diameter Locating Pins - High Hardness Stainless Steel - Small Head

  MISUMI

  "High accuracy positioning is available, because the O.D. can be configured in 0.01mm increment on either of the mounting side or the locating side."

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Small Diameter Locating Pin - Small Head / Press Fit

  MISUMI

  - Small Diameter Locating Pin - Small Head / Press Fit from MISUMI.
  - Insertion Guide Tip Type can be selected 4 types, Tapered, Taper R, Spherical and Flat.
  - Material code SG and DG are applicable to L configurable type of sphere only.
  - L selectable type is applicable to spherical tip type only.
  - SUS304 may not be polished.
  - Chamfering of mounting portion and change of tolerance are available as alterations.
  - Shaft diameter can be configured up to 3 mm.
  

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Large Flat Head (Press Fit)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel, Large Flat Head (Press Fit)
  - Large Flat Head with each dimension configurable. We reduced the price drastically compared to the conventional products.
  - If the diameter of locating pin exceeds Ø10, core hardness may be 30HRC~.
  - The tightening torque (ref. value) for hardened products is strength class 10.9. Not applicable when using locking materials or lock washers.
  - The material of this locating pin is made of High hardness stainless steel.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Small Head, Tapered (Press Fit)

  MISUMI

  For High Hardness Stainless Steel, Small Head Tapered Type, the configurable range of dimensions has been further widened. For order of up to 1,000 pcs., the 7th Day Shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - High Hardness Stainless Steel, Straight (Press Fit)

  MISUMI

  - Locating Pins - High Hardness Stainless Steel, straight (Press Fit) from MISUMI.
  - A straight positioning pin made of high hardness stainless steel.
  - Insertion Guide Tip Type can be selected into 3 types, Tapered, Tapered R or Spherical.
  - Tapped type locating pin provided tapped thread for disassembled.
  - For tapped type, unless described otherwise on the drawing, the spec, design is the same as for Press fit type.
  - The tightening torque (ref. value) is tightening torque strength class 10.9. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Large Flat Head - Side Locating - Press Fit

  MISUMI

  Grinding undercut shape and the pin material have been changed to give higher immunity against breaking for lateral load applications.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s) or more

• 

  Locating Pins - Large Head, Bullet Nose, Compact - Press Fit

  MISUMI

  R shape at insertion guide enables smooth insertion of workpiece. Compact Type with specifiable shorter L dimension.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Large Head Tapered (Plastic Tip - Press Fit)

  MISUMI

  - Locating Pins - Large Head Tapered (Plastic Tip - Press Fit) from MISUMI.
  - Plastic material bonded to the tip of insertion guide prevents the workpiece from being scratched.
  - SUS304 locating Pins may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
  

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Locating Pins - Pilot Pins - Standard / Press Fit

  MISUMI

  [Features]It is inserted and positioned for purposes such as preventing pitch deviation. It is installed by press-fitting.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins Double Stepped - Press Fit

  MISUMI

  [Features]Suitable for positioning workpieces with different hole diameters. It is installed by press-fitting.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Locating Pins for Height Adjusting - Large Head Press Fit

  MISUMI

  Locating pins for printed circuit boards. B dimension is fixed short for thin boards. Reasonably priced.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s)

• 

  Locating Pins for Height Adjusting - Small Head Press Fit

  MISUMI

  Locating pins for printed circuit boards. B dimension is fixed short for thin boards. Reasonably priced.

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s)

• 

  Locating Pins - Large Head, Tapered - Nonmagnetic - Press Fit

  MISUMI

  Nonmagnetic (Aluminum) Locating Pins. Does not magnetically affect the surroundings.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit)

  MISUMI

  Small Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins Small Head Round Tapered

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Press Fit)

  MISUMI

  - Locating Pins - Shouldered-Taper Angle (D, P Tolerance Selectable-Press Fit) from MISUMI.
  - Shouldered with each dimension configurable.
  - Pin’s mounting method can be selected 3 types, Thread, Tapped or Press fit.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  - SUS440C or 13Cr stainless has an identification groove at any position on D part.
  - SUS304 may not be polished and may have no centering hole.
  

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Press Fit)

  MISUMI

  - Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Press Fit) from MISUMI.
  - Insertion guide tip shape can be selected 2 types, round, and diamond.
  - SUS440C or 13Cr stainless has an identification groove on D part.
  - A machining step remains on the shoulder top for Diamond Shape.
  - SUS304 may not be polished and may have no centering hole.
  - The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
  

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins for Grippers - Stepped

  MISUMI

  [Features]Positioning pin stepped type used for mounting an opening / closing chuck.

  CAD ：

  2D / 3D

  Days to Ship:	9 Day(s) or more

• 

  Locating Pins-High Hardness Stainless Steel/R/Taper R/Press Fit

  MISUMI

  R and Taper R Types have been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 1,000 pcs., 7th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pin High Hardness Stainless Small Head Spherical -Press Fit-

  MISUMI

  For High Hardness Stainless Steel Sphere Small Head, the configurable range of dimensions has been further widened and the number of available alterations has been increased. For orders of up to 1,000 pcs., 7th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Locating Pins-High Hardness Stainless Steel/Small Flat Head/Press Fit

  MISUMI

  For High Hardness Stainless Steel Small Flat Head, the configurable range of dimensions has been further widened and the number of available alterations has been increased. For orders of up to 1,000 pcs., 7th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  Positioning Pin - High Hardness Stainless Steel, Shouldered, Tepered Press Fit

  MISUMI

  Shouldered and Tapered Type has been newly added to the High Hardness Stainless Steel Locating Pin product line-up. For orders of up to 500 pcs., 5th day shipping is available.

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  [Clean & Pack] Locating Pin - Large Head, Tapered, Press Fit

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  ·Degreasing (Anti-rust single packing)	: Part Number SL-□□
  ·Precision cleaning (Degassing double packing)	: Part Number SH-□□
  ·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  [Clean & Pack] Locating Pin - Small Head, Tapered, Press Fit

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  ·Degreasing (Anti-rust single packing)	: Part Number SL-□□
  ·Precision cleaning (Degassing double packing)	: Part Number SH-□□
  ·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  [Clean & Pack] Small Diameter Locating Pin - Straight

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  ·Degreasing (Anti-rust single packing)	: Part Number SL-□□
  ·Precision cleaning (Degassing double packing)	: Part Number SH-□□
  ·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	10 Day(s) or more

• 

  [Clean & Pack] Locating Pin - Large Head, Tapered, Taper Angle Configurable, Tolerance Selectable, Press Fit

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  ·Degreasing (Anti-rust single packing)	: Part Number SL-□□
  ·Precision cleaning (Degassing double packing)	: Part Number SH-□□
  ·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  MiSUMi Economy

  Locating Pins Large Head, Spherical, Press Fit, Standard

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s)

• 

  MiSUMi Economy

  Locating Pins Shouldered, Configurable, Tip Shape Selectable

  MISUMI

  CAD ：

  2D / 3D

  Days to Ship:	11 Day(s)

• 

  Stepped Positioning Pin PJP

  NABEYA BI-TECH

  [Features]
  · Positioning use parallel pin.
  · Dual tip dimensions tolerance joggling type.
  · Bushing for positioning pin use PJS/PJB to be used together.
  · Material / finish: SUJ2 (hardness 58HRC -) polished.

  CAD ：

  2D / 3D

  Standard Price:	105,106 IDR-
  Days to Ship:	17 Day(s) or more

Loading...