Linear Guide Accessories

• 

  Height Adjusting Blocks for Linear Guides - High Precision Type

  MISUMI

  This is a height adjustment block compatible with linear guides for medium and heavy loads.
  Due to standard expansion, length can now be specified in 1mm increments.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  C Cap

  THK

  [Features]
  · When foreign objects or cut particles accumulate in the LM rail mount hole of the LM guide, these may infiltrate inside of the LM block.
  · In such cases, foreign object infiltration can be prevented by blocking the LM rail mount hole using a dedicated cap.
  · The LM rail mount hole dedicated cap C type uses a special synthetic resin with excellent oil resistance and abrasion resistance, which also provides it with sufficient durability.
  · We carry standard inventory for the dedicated caps which is available in M3 to M22 bolts with hex holes.
  · The method for inserting the dedicated cap into the mount hole consists placing a bracket flush against the cap and then slowly pushing it until the cap side is flush with the LM rail.
  · Mount the LM rail mount hole dedicated cap C type without removing the LM block from the LM rail.

  Standard Price:	3,465 IDR-
  Days to Ship:	Same day or more

• 

  Linear Guide Clamps - For Medium/Heavy Load Linear Guides

  MISUMI

  The block can be fixed in any position by clamping the rail of the linear guide. Effective when manually holding a simple position.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	1,185,677 IDR-
  Days to Ship:	Same day or more

• 

  Linear Stopper For Positioning LSDN-N

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	258,509 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Guide Lock Units

  MISUMI

  By strongly pressing against the reference surface of the rail or block, it prevents displacement due to external force.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	141,517 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Linear Clamper-Zee HKL Low Cost Type

  NABEYA BI-TECH

  ● Manual type.
  ● Clamps the rail when the lever is tightened.
  ● Table retention, positioning, anti-chatter.
  ● Weight reduction, low cost.
  ● Compact design. Can easily be assembled to an existing system.

  Standard Price:	1,618,487 IDR
  Days to Ship:	8 Day(s) or more

• 

  Slide Guide - Rail Mounting Hole Caps【100 Pieces Per Package】【100 Pieces Per Package】

  MISUMI

  ・This product prevents foreign objects such as chips from entering the mounting hole.
  - Compatible only with MISUMI's medium load, heavy load, and extreme load linear guides.

  CAD ：

  2D / 3D

  Standard Price:	516,343 IDR
  Days to Ship:	8 Day(s) or more

• 

  Linear Stopper with Urethane Bolt LSW-N-U Type (2)

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	328,873 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Linear Stopper Bolt SBRH

  IWATA MFG

  Stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.

  Standard Price:	113,091 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Simplified Linear Locks

  MISUMI

  By strongly pressing the rail against the reference surface, it prevents displacement due to external force.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	91,795 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Linear Locks

  MISUMI

  By strongly pressing the rail against the reference surface, it prevents displacement due to external force.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	106,737 IDR-
  Days to Ship:	Same day or more

• 

  Linear Guide Clamps - For Miniature Linear Guides

  MISUMI

  The block can be fixed in any position by clamping the rail of the linear guide. Effective when manually holding a simple position.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	764,953 IDR-
  Days to Ship:	8 Day(s) or more

• 

  For linear stopper positioning

  IWATA MFG

  [Features]
  · A standardized stopper for positioning and removal prevention that is compatible with the guide rails of the main linear manufacturers.
  · Dedicated designs that accommodate main rail sizes of 15, 20, 25, 30, 35, etc.
  · Compatible with various application and variations such as bolts with urethane that mitigate impact noise and stopper bolts that can provide precise position alignment.

  CAD ：

  2D

  Standard Price:	227,315 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Guide Taper Locks

  MISUMI

  By strongly pressing against the reference surface of the rail or block, it prevents displacement due to external force.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	42,072 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Linear lock plate stepped type

  MISUMI

  By strongly pressing the rail against the reference surface, it prevents displacement due to external force.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	95,619 IDR-
  Days to Ship:	Same day or more

• 

  Height Adjusting Blocks for Miniature Linear Guides - Standard Rail Type

  MISUMI

  height adjustment block compatible with miniature linear guide standard rails.

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  Guide Bellows for N Series, Optional L Type Bracket, Individual Unit

  NABEL

  The neoprene cross width of 0.35 mm (black) is standard. The heat resistant type has a connector width of 0.36 mm (gray).
  
  [Features]
  · Standardized into 8 types of sizes.
  · Available in a neoprene cross (black) and a heat-resistant glass cross (gray).
  · Individual heat-resistant glass cross units can be used at temperatures of between -20 to 180°C.
  · This product uses PVC, and is used in environments with temperatures of 50°C.
  · We also supply parts where intermediate plates (PVC) have been applied as guide rails.

  Standard Price:	413,095 IDR
  Days to Ship:	33 Day(s) or more

• 

  Linear Stopper, Stopper Blocks

  IWATA MFG

  A stopper for positioning and removal prevention that is compatible with the guide rails of the main linear manufacturers.

  CAD ：

  2D

  Standard Price:	219,575 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Stopper Bolt SBFH

  IWATA MFG

  The surface of the head is hardened to withstand impact. 1 hex nut (SUS304) is included as an accessory.

  CAD ：

  2D

  Standard Price:	113,091 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Linear Stopper For Positioning LSV-N

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	141,237 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Stopper with Urethane Bolt LSV-N-U

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	258,509 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Stopper with Urethane Bolt LSW-N-U Type (1)

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	305,418 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Linear Stopper with Urethane Bolt LSGN-U

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	188,145 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Linear Stopper Bolt SBFN

  IWATA MFG

  Stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.

  Standard Price:	94,328 IDR
  Days to Ship:	11 Day(s) or more

• 

  Linear Guide Block Stopper Plates

  MISUMI

  [Features]·Fall prevention plate for a linear guide block.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	137,691 IDR
  Days to Ship:	8 Day(s) or more

• 

  Linear Guide Lock Plates

  MISUMI

  By strongly pressing the rail against the reference surface, it prevents displacement due to external force.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	137,691 IDR-
  Days to Ship:	Same day or more

• 

  Linear Guide Stopper Bolts

  MISUMI

  The rail mounting bolt can be used as a stopper.
  We have started selling new SUS304 products.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	131,955 IDR-
  Days to Ship:	Same day or more

• 

  Rail Push Plates

  MISUMI

  Install parallel to the linear guide and use the included set screw to press the rail against the reference surface or pin to prevent misalignment.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	133,867 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Height Adjusting Blocks for Linear Guides - Economy Type

  MISUMI

  "For this Height Adjusting Block product, by omitting the process of spec-designing the width tolerance, the price is reduced up to 50% lower than existing products."

  CAD ：

  2D / 3D

  Days to Ship:	12 Day(s) or more

• 

  [Clean & Pack]Linear Guide Stopper Bolts

  MISUMI

  Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
  This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

  ■Part Number for Clean & Pack Products

  · Degreasing (Anti-rust single packing)	: Part Number SL-□□
  · Precision cleaning (Degassing double packing)	: Part Number SH-□□
  · Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

  Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
  SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
  					Post battery assembly process
  SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
  					LCD-related post assembly process
  					In-vehicle camera assembly process
  SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
  					Liquid crystal deposition process
  					Pre-OLED process

  ■Notes
  Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
  Please be careful about the application location and storage environment.

  
  Rail mounting bolts can be used as stoppers.
  The sales of SUS304 products started.

  • Volume Discount

  CAD ：

  2D / 3D

  Standard Price:	204,502 IDR-
  Days to Ship:	18 Day(s) or more

• 

  Optional spacer single unit for bellows N series for guide

  NABEL

  Standardized into 8 types of sizes.

  Standard Price:	404,582 IDR
  Days to Ship:	31 Day(s) or more

• 

  Linear Stopper with Urethane Bolt

  IWATA MFG

  [Features]
  · A standardized stopper for positioning and removal prevention that is compatible with the guide rails of the main linear manufacturers.
  · Dedicated designs that accommodate main rail sizes of 15, 20, 25, 30, 35, etc.
  · Compatible with various application and variations such as bolts with urethane that mitigate impact noise and stopper bolts that can provide precise position alignment.

  CAD ：

  2D

  Standard Price:	336,847 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Stopper Replacement Urethane

  IWATA MFG

  A stopper for positioning and removal prevention that is compatible with the guide rails of the main linear manufacturers.

  CAD ：

  2D

  Standard Price:	34,958 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Stopper Urethane Bolt

  IWATA MFG

  It can be used in combination with a linear brake made by Iwata Mfg. With urethane, impact noise is reduced. 1 hex nut (SUS304) is included as an accessory.

  CAD ：

  2D

  Standard Price:	125,756 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Guide Fixed Component, Linear Lock, LLTA

  INFOM

  Corrects the bend in the linear guide rail to increase the mounting accuracy.
  Maintains the mounting accuracy for the linear guide rail.

  CAD ：

  2D

  Standard Price:	64,736 IDR
  Days to Ship:	11 Day(s) or more

• 

  Linear Stopper for Positioning LSW-N Type (1)

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	180,406 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Linear Stopper for Positioning LSW-N Type (2)

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	219,575 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Stopper For Positioning LSX

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	78,848 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Stopper for Positioning LSY-N Type (1)

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	172,666 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Stopper for Positioning LSY-N Type (2)

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	227,315 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Linear Stopper for Positioning LSZ-N Type (1)

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	180,406 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Stopper for Positioning LSZ-N Type (2)

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	235,055 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Stopper For Positioning LSGN

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	78,848 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Stopper For Positioning LSCN-N

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	274,223 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Linear Stopper For Positioning LSDN

  IWATA MFG

  [Features]
  · Standardized stoppers for fallout prevention and positioning, compatible with guide rails of the major linear motion manufacturers.
  · Dedicated design to match the main rail sizes of 15, 20, 25, 30, 35, etc.
  · Supports a wide variety of applications with a stopper bolt enabling precise position adjustment, a bolt with urethane that mitigates impact noise, and so on.

  CAD ：

  2D

  Standard Price:	211,600 IDR-
  Days to Ship:	11 Day(s) or more

Loading...