SURUGA SEIKI Base

• 

  Breadboard (for M3)

  SURUGA SEIKI

  [Features]
  · An aluminum breadboard for Opt Station 40 mm stages.
  · Includes a handle so that assembled optical systems can be carried as is.
  · The upper surface features 16 mm M3 tapped holes.
  · Flatness: 0.20 mm or less.

  CAD ：

  2D

  Standard Price:	14,803,249 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Pole (end M16)

  SURUGA SEIKI

  A stainless steel pole. Used by standing on various types of stage, base, or similar using an M16P = 1 thread, and then connecting to cross clamps, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Days to Ship:	12 Day(s) or more

• 

  Rods (Tip M6P = 1, M4)

  SURUGA SEIKI

  A stainless steel rod for mounting optical parts. A holder for the Opt Station that can be used as a rod type holder. Includes M4 screws.
  
  [Features]
  ■ [A40M/A41M] A stainless steel rod for mounting optical parts.
  · A holder for the Opt Station that can be used as a rod type holder. Includes M4 screws.
  ■ [A40/A41/A42] A stainless steel rod for mounting optical parts.
  · Includes an M6 (P=1) screw, which can be used together with models A40 to A42, enabling mounting to various types of holder etc. From A40 to A42, M6P=1 screws are included, making mounting possible on a variety of holders.
  · There is a through hole with a diameter of ø3 mm or 4 mm at the bottom of the M6 screw. Insert a wrench or similar into this hole when mounting to a holder in order to fix it securely.

  Days to Ship:	12 Day(s) or more

• 

  Variable Height Pole Set (M6 Tip)

  SURUGA SEIKI

  Use for changing the height of the height adjustment platform, etc. Any length within 300 mm can be specified in increments of 1 mm. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Days to Ship:	15 Day(s) or more

• 

  L-Shaped Bracket A48

  SURUGA SEIKI

  Can be attached to a rod. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  Standard Price:	602,314 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Aluminum bread-board (handle for A64)

  SURUGA SEIKI

  Laboratory units can be configured in saving space installations by placing on existing laboratory benches. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Standard Price:	1,070,839 IDR
  Days to Ship:	11 Day(s) or more

• 

  Aluminum Breadboard (for M4/M6)

  SURUGA SEIKI

  Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Laboratory units can be configured in saving space installations by placing on existing laboratory benches.
  · Units configured on the breadboard can be moved to and stored at any location.
  · Made of aluminum and the surface is anodized. It also comes with a handle which is useful for transportation.
  · The top surface is configured of a 25 mm matrix of tapped holes for both M4 and M6 hole types. All holes are through holes.
  · Features M6 bolt holes for fixing to vibration removal boards.

  CAD ：

  2D

  Standard Price:	11,062,857 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Aluminum Optical Bench

  SURUGA SEIKI

  Lightweight, and rust-proof. Can be used for constructing a linear optical experiment system using a dedicated carrier.
  
  [Features]
  · Can be directly mounted to a vibration removal board using M6 bolts.
  · Bench Width: 50 mm, Height: 25 mm. Low optical axis and high stability.
  · Products with a /ST at the end of the model number include a scale.
  · For total loads applied onto the optical bench, as a general rule, avoid unbalanced or concentrated loads and ensure that it is equal to or less than 10 times the weight of the bench itself.

  CAD ：

  2D

  Standard Price:	2,836,773 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Overhang Plate

  SURUGA SEIKI

  A plate for attaching to stage units and positioning tilt stages. Used when stage units are interfering with each other, making it difficult to place them in close proximity to each other.

  CAD ：

  2D

  Standard Price:	2,551,792 IDR
  Days to Ship:	8 Day(s) or more

• 

  Slide Plate

  SURUGA SEIKI

  Can load and slide Opt Station holders. Can be used for adjusting the position shift of mirror holders, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  Standard Price:	993,125 IDR
  Days to Ship:	8 Day(s) or more

• 

  Flexible Stand

  SURUGA SEIKI

  ø12 or ø20 rods can be fixed and freely positioned. Uses cam type fixing, meaning that three joints can handily be fixed using a single clamp knob.

  CAD ：

  2D

  Standard Price:	4,934,774 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Plate type rod stand

  SURUGA SEIKI

  [Features]
  · A stand for fixing rods with a length of 10 mm.
  · Also includes a 10 mm length rod.
  · Can be used as the rod stand for the Opt Station holder, fixing it in any position (360°).

  CAD ：

  2D

  Standard Price:	990,838 IDR
  Days to Ship:	16 Day(s) or more

• 

  Base Plate A21/A24

  SURUGA SEIKI

  The base plate is compatible with a variety of stages.
  
  [Features]
  · A plate for connecting stages and holders to vibration removal boards with M6 tapped holes etc.

  CAD ：

  2D

  Standard Price:	512,381 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Base Mounting Screw

  SURUGA SEIKI

  Used for fixing base plates and similar items to vibration removal boards etc. Can fix in any position.
  
  [Features]
  · Used for fixing base plates and similar items to vibration removal boards etc. Can fix in any position.

  CAD ：

  2D

  Standard Price:	411,101 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Post

  SURUGA SEIKI

  [Features]
  · Useful if used when the optical axis height is fixed by the optical system.
  · Combine with a post fork to arrange in horizontal orientations with a high degree of freedom.

  CAD ：

  2D

  Standard Price:	581,036 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Magnetic Base

  SURUGA SEIKI

  [Features]
  · Switch the lever ON/OFF to attach or detach to or from magnetized vibration removal boards and laboratory tables etc.
  · Allows for fixing in any position, regardless of the position of the tapped holes.
  · A variety of types are available; from highly magnetized types to thin types. Select the most appropriate product to match the intended application.
  · Rod stands etc., can be mounted with mounting screws of A22-1: M16P=1
  · Use an adapter plate to mount □40 mm and □60 mm stages.

  CAD ：

  2D

  Standard Price:	1,173,206 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Mini optical bench

  SURUGA SEIKI

  Thin, lightweight, and rust-proof. Can be used for constructing a linear and low-optical axis optical experiment system using a dedicated carrier. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  Standard Price:	603,076 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Mini carrier for optical bench

  SURUGA SEIKI

  [Features]
  · A carrier for A16 optical benches.
  · For loads applied onto the optical bench carrier, as a general rule, avoid unbalanced or concentrated loads and ensure that it is equal to or less than 20 times the weight of the carrier itself.

  CAD ：

  2D

  Standard Price:	512,381 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Up/Down fine movement rod stand

  SURUGA SEIKI

  [Features]
  · A rod stand capable of upward and downward micro movements.
  · After fixing the rod with the rod fixing knob, the rod can be moved upward and downward in fine increments by rotating the knurled adjustment knob.
  · After adjusting, fix using the vertical fixing clamps.
  · The range for micro movements is 10 mm.

  CAD ：

  2D

  Standard Price:	1,965,958 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Positioning Plate A50

  SURUGA SEIKI

  A positioning plate that is compatible with a variety of stages. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  Standard Price:	612,180 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Carrier for Optical Benches A11/A19

  SURUGA SEIKI

  A carrier for the A10.
  
  [Features]
  · A carrier for optical benches.

  CAD ：

  2D

  Standard Price:	1,581,245 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Spacer □40 for optical axis height adjustment

  SURUGA SEIKI

  [Features]
  · A 40 mm spacer for aligning the optical axis.
  · Used when the assembled height of the stage is insufficient in relation to the configured optical axis etc.
  · Features external dimensions of 40 × 40 mm. Can be used for 40 stages or Opt Station holders.
  · Available in dimensions of 10 mm to 50 mm in increments of 5 mm (by combining spacers).
  · More detailed adjustment is possible by using combinations of A50-H, R, J, V, W, X, and Y.

  CAD ：

  2D

  Standard Price:	390,799 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Spacer □60 A49 for Optical Axis Height Alignment

  SURUGA SEIKI

  A spacer for aligning the optical axis. Used when the assembled height of the stage is insufficient in relation to the configured optical axis etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  Standard Price:	409,577 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Rotating Plate A55-11

  SURUGA SEIKI

  Can load, 360° rotate, and fix at any position Opt Station holders. Can be easily rotated, making it ideal for routing optical circuits.

  CAD ：

  2D

  Standard Price:	1,573,622 IDR
  Days to Ship:	8 Day(s) or more

• 

  Rotation type (handle type) cross clamp

  SURUGA SEIKI

  [Features]
  · A cross clamp for heavy loads.
  · Poles and rods can be rotated to any angle and then fixed.
  · Fixing is done using a split clamping method.
  · Features a slitted fixing section. Twist the clamp section to securely fix the object.
  · There are three types available for different combinations of applicable diameters.

  CAD ：

  2D

  Standard Price:	1,963,671 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Rotation-type (Hexagon Type) Cross Clamp

  SURUGA SEIKI

  [Features]
  · A bolt type cross clamp for heavy loads. The bolt includes a hexagonal socket head.
  · Poles and rods can be rotated to any angle and then fixed.
  · Fixing is done using a split clamping method.
  · Fixing is done by tightening the M5 bolts.
  · Features a slitted fixing section. Twist the clamp section to securely fix the object.

  CAD ：

  2D

  Standard Price:	1,761,383 IDR
  Days to Ship:	11 Day(s) or more

• 

  Rotation Type Cross Clamp A45-16/17/18

  SURUGA SEIKI

  A cross clamp for fixing a pole or a rod at an arbitrary angle. Poles and rods are fixed using the clamp. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  Standard Price:	708,974 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Fixed-type (handle type) cross clamp

  SURUGA SEIKI

  [Features]
  · A cross clamp for heavy loads.
  · Poles or rods can be orthogonally connected.
  · Fixing is done using split clamping.
  · Features a slitted fixing section. Twist the clamp section to securely fix the object.
  · There are three types available for different combinations of applicable diameters.

  CAD ：

  2D

  Standard Price:	1,574,385 IDR
  Days to Ship:	20 Day(s) or more

• 

  Fixed-type (Hexagon Type) Cross Clamp

  SURUGA SEIKI

  [Features]
  · A bolt type cross clamp for heavy loads. The bolt includes a hexagonal socket head.
  · Poles or rods can be orthogonally connected.
  · Fixing is done using split clamping.
  · Fixing is done by tightening the M5 bolts.
  · Features a slitted fixing section. Twist the clamp section to securely fix the object.

  CAD ：

  2D

  Standard Price:	871,286 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Fixed Type Cross Clamp A45-10/11/12

  SURUGA SEIKI

  A cross clamp for orthogonally connecting poles or rods. Poles and rods are fixed using the clamp. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  Standard Price:	574,243 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Small Tooling Plates

  SURUGA SEIKI

  Allows for the easy modularization of optical systems.
  
  [Features]
  · The smallest breadboard in the product line-up.
  · Features a modularized Opt Station and 40 mm stage combination etc. Can be fixed to the top of vibration removal boards and breadboards and easily moved and stored.
  · The top surface is configured of a 25 mm matrix of tapped holes for the M6 type, and 8 mm or 16 mm for the M3 type. All holes are through-holes.
  · Features M6 bolt holes for fixing to vibration removal boards etc.
  · Allows for the easy modularization of optical systems configured with Opt Stations and a 40 mm stage, etc.

  CAD ：

  2D

  Standard Price:	3,979,474 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Adapter Plate

  SURUGA SEIKI

  An adapter plate that is compatible with a variety of stages. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  CAD ：

  2D

  Standard Price:	408,433 IDR-
  Days to Ship:	8 Day(s) or more

Loading...