SUNCO Screws for Building Materials（Sales Unit：Box / Package）

• 

  Countersunk Head Wooden Screw【200-5,000 Pieces Per Package】

  SUNCO

  A screw used to fasten wood.
  [Features]
  ·Wood screws are basically the same as tapping screws, by drilling pilot holes and then tightening them with a screwdriver.
  ·When drilling a pilot hole, use a drill or drill to make the hole about 70% the thickness of the wood screw.
  ·Material: Steel/brass/stainless steel.

  Standard Price:	108,000 IDR-
  Days to Ship:	Same day or more

• 

  Countersunk Head Wooden Screw(Double Threaded and Thin)【500-5,000 Pieces Per Package】

  SUNCO

  SUNCO screw for building materials, countersunk wood screw. (double-thread narrow body type)

  Standard Price:	370,677 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Coarse Thread Trumpet Head with Phillips Head【100-1,000 Pieces Per Package】

  SUNCO

  [Material] Steel, stainless steel SUS410, stainless steel
  [Surface treatment] None, trivalent chromate, bright chromate plating, chromate plating, parker, painting, coating, silver, copper, tin plating

  Standard Price:	313,143 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Round Wood Screw【200-2,500 Pieces Per Package】

  SUNCO

  As the name suggests, this is a construction screw used for wood.
  [Features]
  ·Make a pilot hole and tighten it in the same way as a self-tapping screw.
  ·The more you tighten it, the more it goes into the wood.
  ·About 2/3 of the overall length is the thread section.
  ·Threads are not applied to the material sandwiched in the middle.
  ·In addition to the tightening force strengthened by being in close contact with, it prevents detents and rattling.
  ·It is possible to substitute a wood screw with a self-tapping screw that can also be used for resin and metal, but the reverse is not possible.
  [Applications]
  ·Often used at construction sites.

  Standard Price:	296,000 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Pan Washer Head (Double Thread)【300-600 Pieces Per Package】

  SUNCO

  [Features]
  ·In a self-tapping screw with the thread section with multiple threads, there is a part where torque is applied at the boundary between the tip cone and the shaft. The MT screw is a double-thread screw, but in order to eliminate the torque load, a threadless part is prepared at the boundary which rotated half a turn or several times to achieve smooth workability when screwing.

  Standard Price:	384,662 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Hook Bolt Set (Black, Large Wave)【100 Pieces Per Package】

  SUNCO

  [Material] Steel, stainless steel
  [Surface treatment] None, chromate plating

  Standard Price:	530,167 IDR
  Days to Ship:	8 Day(s) or more

• 

  Raised Countersunk Head Wood Screw【100-1,000 Pieces Per Package】

  SUNCO

  A raised countersunk head screw for building materials that is tightened by making a pilot hole in the same way as a self-tapping screw.
  [Features]
  ·As the name suggests, screws used for wood.
  ·The more you tighten it, the more it goes into the wood.
  ·About 2/3 of the overall length is the thread section.
  ·Threads are not applied to the material sandwiched in the middle.
  ·In addition to the tightening force strengthened by being in close contact with, it prevents detents and rattling.
  ·It is possible to substitute a wood screw with a self-tapping screw that can also be used for resin and metal, but the reverse is not possible.
  [Application]
  ·Often used at construction sites.

  Standard Price:	205,564 IDR-
  Days to Ship:	8 Day(s) or more

• 

  No.1 Screw【800-3,000 Pieces Per Package】

  SUNCO

  
  · The No. 1 cross recessed bit type gave its name to the "No. 1 screw"
  · Wooden screw with the thickness and length of thin nails. It was designed as an alternative to nails.
  · Since the screw outer diameter is thin, it can be screwed in lightly without pilot holes.
  · Also, the mating material is unlikely to break and the head diameter is small and does not stand out after use, enabling a clean finish.
  · Unlike nails, it has retaining force, as well as remarkably superior pull-out resistance.
  · Due to using killed steel and quenching, thread cutting, bending, and cross hole slump are minimized, and even teak and tamo timber can be screw-fastened without pilot holes or dish boring.
  · Convenient for frames, floors, and door stops.

  Standard Price:	1,499,833 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Light Screw, Thin Washer【600-1,000 Pieces Per Package】

  SUNCO

  SUS410 cross-recessed countersunk light gauge steel screw. The surface treatment is bright chromate plating, and it is sold in units of boxes and packs.

  Standard Price:	1,255,811 IDR-
  Days to Ship:	17 Day(s) or more

• 

  Thin Metal Sheet, Head Teeth (Dry Wall/One-Touch) with Phillips Head【1,000 Pieces Per Package】

  SUNCO

  [Material] Steel SUS410
  [Surface treatment] None, trivalent chromate bright chromate plating, painting, coating

  Standard Price:	302,505 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Perfect Screw (Trumpet Flexible Head)【300-1,000 Pieces Per Package】

  SUNCO

  [Type] Other carpentry screw
  [Material] Steel
  [Surface treatment] chromate plating
  [Surface treatment] (detail) chromate plating
  [Sales unit] Boxes/pack
  [Detailed shape] Flexible head
  [Screw nominal designation (M)] 3.8, 4.2, 5.1
  [Length] 28, 32, 38, 45, 51, 65

  Standard Price:	378,635 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Particle Board Screw Truss with Phillips Head【1,500 Pieces Per Package】

  SUNCO

  [Type] Wood screw
  [Screw nominal designation (M)] 4
  [Length] 14
  [Material] Steel
  [Surface treatment] chromate plating
  [Surface treatment] (detail) chromate plating
  [Mount hole shape] Phillips head
  [Sales unit] Boxes/pack
  [Detailed shape] Truss

  Standard Price:	685,000 IDR
  Days to Ship:	8 Day(s) or more

• 

  Round Wood Screw (Slotted)【1,500 Pieces Per Package】

  SUNCO

  It is a round wood screw with a straight-slot made of steel. The surface is nickel-plated and sold in boxes and packs.

  Standard Price:	1,096,000 IDR
  Days to Ship:	14 Day(s) or more

• 

  Round Wood Screw (Phillips/Slotted)【1,000 Pieces Per Package】

  SUNCO

  Round head wood screws used for wood.
  [Features]
  ·Make a pilot hole and tighten it in the same way as a self-tapping screw.
  ·The more you tighten it, the more it goes into the wood, and about 2/3 of the overall length is the thread section.
  ·Since threads are not applied to the material sandwiched in the middle, it adheres tightly and the tightening force is strengthened.
  ·Prevents detents and rattling.
  ·It is possible to substitute a wood screw with a self-tapping screw that can also be used for resin and metal, but the reverse is not possible.
  [Application]
  ·It is often used at construction sites.

  Standard Price:	444,361 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Countersunk Head Wooden Screw (Double Threaded)【2,000 Pieces Per Package】

  SUNCO

  SUNCO screw for building materials, countersunk wood screw. (Double-thread fully-threaded type)

  Standard Price:	1,682,667 IDR
  Days to Ship:	14 Day(s) or more

• 

  Raised Countersunk Head Wood Screw (Double Row Thin Body)【2,000 Pieces Per Package】

  SUNCO

  SUNCO screw for building materials, raised countersunk head wood screw. (double-thread narrow body type)

  Standard Price:	1,259,549 IDR
  Days to Ship:	8 Day(s) or more

• 

  Nut Insert (F Type)【150 Pieces Per Package】

  SUNCO

  Insert nuts made of steel, with synthetic resin and natural shape. 20 mm and 25 mm lengths are available.

  Standard Price:	369,667 IDR
  Days to Ship:	14 Day(s) or more

• 

  Hexagon Coach Screw【100 Pieces Per Package】

  SUNCO

  
  · Ideal for places where bolt fastening is not required or where the strength of wooden screws is not satisfactory.
  · Since the head is hexagonal, it is possible to apply high torque with a wrench, etc.

  Standard Price:	474,586 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Joytect JT75【150-200 Pieces Per Package】

  SUNCO

  
  · Ideal for floor joists, lumber girders, and other joists
  · Screws developed for mounting joists that hold up the floor of residential 1st storeys to the horizontal beams (timber that supports the floor)
  · The threaded portion is a single thread with a thick diameter of 5 mm.
  · The cutting flutes at the underneck cut into the mating material to achieve an appropriate fit, while the flanged flexible head delivers a beautiful and flush finish
  · It is inserted easily with a special blade to prevent cracking.

  Standard Price:	916,000 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Heat Insulating Panel Screw (Paneread II)【100 Pieces Per Package】

  SUNCO

  Panel + Wood for Heat-Shielding/Insulation

  Standard Price:	443,000 IDR
  Days to Ship:	14 Day(s) or more

• 

  Light Screw Yamahiro (Drywall) Self Tapping Screw【700 Pieces Per Package】

  SUNCO

  
  · The triangular truss head has been modified with a gentle slope to make it thinner and visually appealing with a wide holding pressure.

  Standard Price:	3,170,500 IDR
  Days to Ship:	14 Day(s) or more

• 

  Light Screw, Flexible (Drywall) Yamahiro【1,000 Pieces Per Package】

  SUNCO

  A cross-recessed light gauge steel made of steel. Painted head (white). Sold in boxes/packs.

  Standard Price:	298,346 IDR
  Days to Ship:	8 Day(s) or more

• 

  Coarse Thread Modotorasu Yamahiro w/ Cross Hole【100 Pieces Per Package】

  SUNCO

  
  · "Mod Truss" refers to a "modified truss", which means an improved triangular form
  · The triangular truss head has been modified with a gentle slope to make it thinner and visually appealing with a wide holding pressure.
  · The shape of the head has been designed by Yamahiro, Ltd. There is also a thinner head shape called a flat mod truss.

  Standard Price:	546,165 IDR
  Days to Ship:	8 Day(s) or more

• 

  Coarse Thread Wrapper with Cross Hole Made by KM Seiko【200-1,000 Pieces Per Package】

  SUNCO

  Cross-recessed coarse thread made of steel. The surface treatment is trivalent chromate.

  Standard Price:	215,940 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Kiri-In Hexagonal【200 Pieces Per Package】

  SUNCO

  
  · Makes it possible to tighten in one action in locations where it is normally necessary to first drill a pilot hole for an anchor bolt or anchor for hollow walls
  · Pilot holes can be independently formed on 6 mm to 9 mm ASLOC panels using the long cutting edge to perform tightening in a single step
  · Screw that achieves labor-saving fastening and lowers the total cost of mounting
  · It is used for attaching various parts, such as metal fittings, piping saddles, duct metal fittings, switchboards, ventilating fan hoods, etc.

  Standard Price:	3,493,333 IDR
  Days to Ship:	14 Day(s) or more

• 

  Particleboard Screw Countersinking【1,500 Pieces Per Package】

  SUNCO

  
  · Screw developed for MDF and particle board that lack the elasticity of natural wood and have a soft interior, making it harder for screws to catch.
  · The base diameter is much thinner than the screw outer diameter, creating a notable difference between the thread and base and a coarse pitch.
  · The thin base diameter allows it to enter gently without crushing soft materials, and the threading with its large surface area allows the tapping of a wide range of female threads. In addition, on the side in the tip direction of the screw threads, the screwing torque is small because of the acute angle formed at the crests, and an excessive load is not applied to the fitting material. Conversely, the angle of the thread crests on the head side is obtuse. To grasp the fitting material strongly after tightening, the thread crest and valley difference has extremely high draw-out strength. Together with the difference between the angles of the thread crests on the head side and tip side, these characteristics have achieved an outstanding retention force and low screwing torque.
  · Since the thread is tapped from the apex of the screw tip, it bites immediately into the opposite material with good workability to prevent sudden crushing of the opposite material.
  · This "Particle Bit" is an optimized dedicated bit that solves the problems of "screws not working" and "falling out after tightening" that conventional screws have with MDF "particle board" (utility model registered)

  Standard Price:	890,000 IDR
  Days to Ship:	14 Day(s) or more

• 

  All-Round Screw【330-500 Pieces Per Package】

  SUNCO

  Hardware + wood substrate base
  Thin Steel Plate + Wood Base Plate

  Standard Price:	573,333 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Hiblow【160 Pieces Per Package】

  SUNCO

  
  · The threaded portion has double-thread high and low ridges with a cut tip.
  · Short sizes missing the thread at the underneck have 1, while long sizes have 2 "twisted knurls" made by rolling processing
  · Holds onto the workpiece at the first strike just like a "universal screw", enabling stable and speedy fastening work
  Also, by drilling a "clearance hole" for the friction generated when the unthreaded is screwed into the fitting material, the torque can be elevated.
  · Although the head is flexible, the serrations (ribs) come closer to the outer periphery of the head than in the case of conventional flexible heads, enabling the head to fit well to the seat surface and provide a beautiful finish
  · Wide size variation flexibly supports various thicknesses and lengths

  Standard Price:	191,167 IDR
  Days to Ship:	14 Day(s) or more

• 

  Spoon Screw Thread【600 Pieces Per Package】

  SUNCO

  
  · The threaded portion is the same as the coarse thread, and the head is a flexible head.
  · A spoon point is provided on the screw tip portion (similar to the tip of a lance), and an internal thread can be created cleanly since it is screwed in, forming a pilot hole in the opposite material, by cutting just the same thickness as the screw shaft diameter itself
  · It takes some time to machine the fitting material at the spoon point when first starting to insert the screw, but it produces a beautiful finish from the fitting material surface without excessive pushing.
  · Can be used for all kinds of wood, especially effective for hard materials and wood knots
  · It can also be used for thin iron plates of about 0.8 mm

  Standard Price:	572,833 IDR
  Days to Ship:	14 Day(s) or more

• 

  Hexagon Coach Screw, OKITSURASEN【100-200 Pieces Per Package】

  SUNCO

  SUNCO screw for building materials, Hex coach screw made by Okitsurasen.

  Standard Price:	1,376,241 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Alinc Plate (SUSXM7)

  SUNCO

  "Mounting parts + AAC".
  [Features]
  ·The thread section has a thread formed to the very end so as not to crush the foam body by force, and it has good bite and the starting torque is small.
  ·The pressure during screwing is relieved by letting the chips escape to the deep valley of the thread section, and in addition, the effect of forming female threads with the chips makes it possible to firmly fasten and exert a strong holding power.
  ·The head shape is truss and countersunk shape.
  ·The material is SUSXM7, which does not easily rust.

  Standard Price:	344,667 IDR-
  Days to Ship:	14 Day(s) or more

• 

  Alinc Truss (SUSXM7) (pack product)【1-70 Pieces Per Package】

  SUNCO

  Screws for building materials with high holding power.
  [Features]
  ·Push the cutting chips inward to make a secure female thread.
  ·Since the first thread is a complete thread, it has a good bite and can be screwed in with a small thrust.
  [Applications]
  ·Dedicated to AAC panels.

  Standard Price:	344,667 IDR-
  Days to Ship:	13 Day(s) or more

• 

  Alinc Plate (SUS430 JPF)

  SUNCO

  It is a product with 1 to 500 pieces. Some products can be purchased starting from 1 piece.

  Standard Price:	6,015 IDR
  Days to Ship:	8 Day(s) or more

Loading...