SMC Rotary Actuators（Type：Rotary Actuator Both Sides Shaft Outputs）

• 

  Rotary Actuator, Vane Type, CRB1 Series

  SMC

  [Features]
  · Works with the model D-M9□ compact auto switch.
  · Highly reliable.
  & nbspSupports thrust and radial loads and uses bearings.
  · The body can be mounted directly.
  · 2 types of port location; side ported or axial ported.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Compact Rotary Actuator, Rack And Pinion Type, CRQ2 Series

  SMC

  [Features]
  · Uses internal cushioning.
  · The main body can also serve as a flange.
  · With angle adjustment mechanism (each rotation end ±5°).
  · 360° rotating angle type.
  · Piping can be installed from one end.
  · 2 auto switches can be mounted on the same side (mountable on both sides).
  · A double piston design free from backlash.
  · Shaft type: Supports both single and double shafts.
  · Centering is easy when mounting the body.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Rotary Table, Rack And Pinion Type, CRA1 Series

  SMC

  [Features]
  · The model D-M9□ compact auto switch can be equipped.
  · Overall width reduced by up to 14 mm.
  · Mountable on 2 surfaces.
  · Auto switch can be mounted from the front.
  · Weight reduced by up to 14%.
  · Mounting compatibility with existing models.
  · The cushion seal is replaceable.
  · Easy adjustment of the cushion valve.
  · The ports, cushion valve and auto switch are all located on the same surface for improved usability.
  · Many variations of shaft type.
  · Can be mounted in a way that is suitable for the operating conditions/environment.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Rotary Actuator With Angle Adjuster, Vane Type, CRB2□WU Series

  SMC

  Can be combined freely with many kinds of unit.
  [Features]
  With angle adjuster.
  · Piping port parts are located on the flat section.
  · Many variations of shaft-end shape (6 types).
  · Works with the compact auto switch D-M9□ type.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Free Mount Type Rotary Actuator, Vane Type, CRBU2 Series

  SMC

  Can be combined freely with many kinds of unit.
  [Features]
  · Boasts a 12% weight reduction.
  · Multiple mounting variations.
  · Works with the compact auto switch D-M9□ type.
  · Possible to move the plate mounting position as desired.
  · Mounting pitch compatible with existing models.
  · Rotation angles of 90°, 180° and 270°; all of the series can rotate up to 270°.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• • On Sale Till 31/12/2024

  

  Rotary Actuator, Vane Type, CRB2 Series

  SMC

  Can be combined freely with many kinds of unit.
  [Features]
  · Piping port parts are located on the flat section.
  · Many variations of shaft-end shape (6 types).
  · Works with the compact auto switch D-M9□ type.

  CAD ：

  2D / 3D

  	Special Price
  Days to Ship:	Same day or more

• 

  CRA1□□U Series Angle Adjustable Rotary Actuator, Rack & Pinion Type

  SMC

  A rotary actuator that can be mounted according to the operating conditions.
  [Features]
  · Compact auto switches are mountable (D-M9□).
  · The cushion seal is replaceable.
  · Easy adjustment of the cushion valve.
  · The ports, cushion valve and auto switch are all located on the same surface for improved usability.
  · Many variations of shaft type.
  · Angle can be adjusted to the desired level in a range of up to 90°.
  · CRA1: basic type / CDRA1: with auto switch.
  · Size: 50, 63, 80, 100.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Free Mount Type Rotary Actuator With Angle Adjuster, Vane Type, CRBU2WU Series

  SMC

  Can be combined freely with many kinds of unit.
  [Features]
  With angle adjuster.
  · · Boasts a 12% weight reduction.
  · Multiple mounting variations.
  · Works with the compact auto switch D-M9□ type.
  · Possible to move the plate mounting position as desired.
  · Mounting pitch compatible with existing models.
  · Rotation angles of 90°, 180° and 270°; all of the series can rotate up to 270°.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Rotary Actuator With Solenoid Valve, Vane Type, CVRB1 Series

  SMC

  Rotary actuator with solenoid valve.
  [Features]
  ·2 types of port positions, body side and axial direction
  ·Mounting method: Direct mounting / foot type mounting
  ·Auto switch: None (no symbol), with auto switch (D)
  ·Size: 50, 63, 80, 100
  ·Vane type: Single vane, double vane
  ·Rotating angle: 90°, 100°, 180°, 190°, 270°, 280°, 45°, 135°

  Days to Ship:	15 Day(s) or more

• 

  Rotary Actuator, Vane Type, Clean and Low Dust Generation 10-/21-CRB1 Series

  SMC

  [10-Series Clean Series]
  ・ This product can be used in a clean environment
  ・ Prevents dust generation in the cleanroom
  
  [21-Series, Copper-Free/ Fluorine-Free/ Silicone Type-Free + Low Dust Generation]
  ・ This product can be used in environments with restrictions on copper-based, fluorine-based, and silicone-based materials
  ・ The structure is the same as the Clean Series (Grease and packaging are different from the Clean Series)

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  CVRA1 Series Rotary Actuator With Solenoid Valve, Rack & Pinion Type

  SMC

  Solenoid valve and rotation speed adjustment function are integrated.
  [Features]
  · Compact auto switches are mountable (D-M9□).
  · Replaceable cushion seal, easy adjustment of cushion valve.
  · The ports, cushion valve and auto switch are all located on the same surface for improved usability.
  · Numerous shaft shape variations allow mounting to suit the operating conditions.
  · Part number is set for the angle adjustable type.
  · CVRA1: basic type / CDVRA1: with auto switch.
  · Size: 50, 63, 80, 100.

  Days to Ship:	15 Day(s) or more

• 

  CRQ2X Series Rack & Pinion Type Compact Low-Speed 90°/180° Rotary Actuator

  SMC

  Compact, low-speed rotary actuator capable of low-speed transfer of workpieces.
  [Features]
  · Achieves stable motion at 5 s/90°.
  · Smooth motion without sticking or slipping.
  · Rotation time adjustment range: 1 to 5 s/90°.
  · Standard type: CRQ2 / With auto switch: CDRQ2.
  · Size: 10, 15, 20, 30, 40.
  · Port types: G1/8, NPT1/8, NPTF1/8, Rc1/8, M5.

  CAD ：

  2D / 3D

  Days to Ship:	15 Day(s) or more

• 

  Rotary Actuator, Rack and Pinion Type, Clean Series 11-CRA1-Z Series

  SMC

  [11-Series Clean Series]
  ・ This product can be used in a clean environment
  ・ Prevents dust generation in the cleanroom

  Days to Ship:	15 Day(s) or more

• 

  ATEX Directive, Rotary Actuator, Vane Type 55-CRB1 Series, ATEX Category 2

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	15 Day(s)

• 

  ATEX Directive, Rotary Actuator, Vane Type 56-CRB1 Series, ATEX Category 3

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	15 Day(s)

• 

  ATEX Directive, Rotary Actuator, Vane Type 55-CRB2 Series, ATEX Category 2

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	15 Day(s)

• 

  ATEX Directive, Rotary Actuator, Vane Type 56-CRB2 Series, ATEX Category 3

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	15 Day(s)

• 

  ATEX Directive, Rotary Actuator, Free Mount Type, 55-CRBU2 Series

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	15 Day(s)

• 

  ATEX Directive, Rotary Actuator, Free Mount Type, 56-CRBU2 Series

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	15 Day(s)

• 

  ATEX Directive, Low Profile Rotary Actuator, Rack and Pinion Type, 55-CRQ2 Series

  SMC

  [What is the ATEX directive?]
  Since July 1, 2003, it has been mandatory within the EU to comply with the ATEX Directive for equipment used in potentially explosive atmospheres.
  ■CE mark and ATEX
  The ATEX Directive is now part of the CE mark, which incorporates the conventional European explosion-proof standard.
  ■Purpose of ATEX Directive
  The main purposes of ATEX are:
  ・ Prevention of static charge
  ・ Ignition prevention of sparks caused by friction, impact, and wear
  ・ Ignition prevention due to temperature rise due to the same as above
  ・ The responsibility lies with the manufacturer
  ・ Certification by zone/category
  ■Zone / category division
  In ATEX, the objects to be applied are classified into categories according to the category of dangerous places (zone).
  ・ Zone 0: Category 1
  Probability of explosive atmosphere (Zone): Continuous or long time, > 1,000 hours/year
  ・ Zone 1: Category 2
  Probability of explosive atmosphere (Zone): Occasionally, 10 to 1,000 hours/year
  ・ Zone 2: Category 3
  Probability of explosive atmosphere (Zone): Less likely, short time < 10 hours/year

  Days to Ship:	15 Day(s)

Loading...