SHINOHARA ELECTRIC Louvers

• 

  Free Aluminum Gallery (FAG Type) 1P × 2

  SHINOHARA ELECTRIC

  This aluminum ventilation gallery is designed to enable ventilation of cubicles, switchboards, etc.
  
  [Features]
  - Extra-long galleries can be produced to the customer's specifications.
  - It is not necessary to directly drill conventional ventilation holes into the panel.
  - This free aluminum gallery can be mounted from the rear as a separate component.
  - Ventilation efficiency is high without sacrificing opacity.
  - Light with no risk of rusting.

  Standard Price:	1,717,638 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Gallery with Hood (for outdoor use: FG type), IPX4

  SHINOHARA ELECTRIC

  The hood helps it deal with wind and rain.
  
  [Features]
  - The hood mounted to the gallery provides wind and rain protection.
  - Simple installation.
  - Mount by snapping into the panel holes and screwing in the retention frame (retention board) from the underside.
  - Accessories like a blow prevention cover, insect screen and anti-dust filter provide the features needed for your applications.
  - (FG-15, FG-20 only.)
  - Can be included in a set with a salt filter.

  CAD ：

  2D

  Standard Price:	1,356,728 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Small Ventilation Louver (For Indoor Use)

  SHINOHARA ELECTRIC

  Used for ventilation of indoor control panels, panel boards, etc.
  
  [Features]
  · Can be installed directly on panels as before, with no hole drilling required.
  · Ventilation galleries can be installed afterward, reducing workload.
  · A 120mm square fan can also be installed (SG1-10-4)

  CAD ：

  2D

  Standard Price:	398,167 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Ventilation Gallery (Anti-Salt Damage Specification) IP4X

  SHINOHARA ELECTRIC

  Use as a ventilation component of a switchboard installed in IP4X coastal areas, etc.

  CAD ：

  2D

  Standard Price:	9,483,167 IDR
  Days to Ship:	11 Day(s) or more

• 

  Jet-Flow Proof Ventilation Gallery (for dealing with salt damage) IP55

  SHINOHARA ELECTRIC

  A ventilation component for a switchboard installed in IP55 coastal areas.
  
  [Features]
  - Low pressure loss (approximately half that of conventional products).
  - Efficiently collects sea salt particles.
  - Long lifespan (more than twice that of conventional products).
  - Even if collected sea salt particles deliquesce from the filter, the pressure loss increases only a little.
  - Deliquesced sea salt particles flow out downstream, ensuring minimal re-entrainment.
  - Superior impact resistance.

  CAD ：

  2D

  Standard Price:	12,316,500 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Jet Proof Type Louver (Resin Cover Type) IP45

  SHINOHARA ELECTRIC

  For ventilating cubicles and switchboards installed in harsh outdoor conditions. The protective plastic cover keeps the unit lightweight.
  
  [Features]
  - The plastic-resin rear anti-pull-in cover reduces weight and improves workability.
  - No paint required for the anti-pull-in cover, reducing costs.
  - Strong waterproofing that can pass JISC4620/JISC0920 anti-water jet testing (IP45).

  CAD ：

  2D

  Standard Price:	1,381,579 IDR-
  Days to Ship:	11 Day(s) or more

• 

  In-Wing Ventilation Gallery (Anti-Water Jet Type), IP45

  SHINOHARA ELECTRIC

  Use for ventilating operation boards, control panels, and cubicles. Large opening size.
  
  [Features]
  · Can secure an opening area of 148 cm2 using outdoor specifications for attaching blow prevention covers.
  · Significant labor savings are possible because, just as in the past, there is no need to put a vent in the panel.
  · Also, a breathing hole can easily be added.
  · Combines the rear gallery with anti-blow-in cover for strong waterproofing that can pass JISC4620/JISC0920 (anti-water jet) testing (IP45).
  · Stainless steel type also available (built to order)

  CAD ：

  2D

  Standard Price:	2,700,509 IDR-
  Days to Ship:	11 Day(s) or more

• 

  Gallery with Fan (stainless steel) IP45

  SHINOHARA ELECTRIC

  Gallery with fan that is usable outdoors.
  
  [Features]
  · Has a water repellent filter for a structure with superior waterproofing.
  · Can be mounted to panels with simple hexagonal machining.
  · Set includes fan finger guard and power supply cord.
  · Filter can be washed and reused.
  · Available in beige 5Y7/1 and cream 2.5Y9/1 colors.

  Standard Price:	6,149,833 IDR
  Days to Ship:	8 Day(s) or more

• 

  Plastic Gallery, PC Series

  SHINOHARA ELECTRIC

  Plastic galleries for control panels and instrument panels. The filter can be replaced from the front panel. (Plastic)
  
  [Features]
  · The task of installing has been streamlined by a simple one-touch mounting to the panel apertures.
  · The superior aesthetic appearance can enhance the commercial value of panels by sequential vertical/horizontal mounting.
  · The filter can be replaced by simply removing the front panel of the gallery.
  · 4.90 sq.mm, 120 sq.mm, and 160 sq.mm fans can be mounted.

  CAD ：

  2D

  Standard Price:	181,500 IDR
  Days to Ship:	8 Day(s) or more

• 

  Blow-in Prevention Gallery, IP45

  SHINOHARA ELECTRIC

  Use the blow-in prevention gallery as a ventilation part for cubicles and switchboards in harsh outdoor conditions.
  
  [Features]
  - No ventilation holes need to be cut in large panels.
  - Retrofit this component on installed ventilation galleries.
  - The ventilation gallery and blow-in prevention cover are a single part, making it waterproof up to the JIS C 4602/JIS C 0920 standards (blow-in prevention tests).
  - Stainless steel ventilation galleries also available.

  CAD ：

  2D

  Standard Price:	3,149,833 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Ventilation Louver (Made Of Steel Plate & Stainless Steel)

  SHINOHARA ELECTRIC

  Use as a component for ventilation systems found on operation/control panels, switchboards, cubicles etc.
  
  [Features]
  · Using a ventilation louver means that there is no need to punch ventilation holes in panels as before, thereby helping make much more efficient use of space.
  Extremely easy to mount. Simply insert the ventilation louver from the front into the panel holes and then screw in the holding frame from the back.
  Available in different specifications for use in different applications. Select one or more accessories (blow-in protection cover, insect screen, dustproof filter etc.) depending on the intended application.
  Use the blow-in protection cover (structured so that blown-in rainwater flows back out) for outdoor use (IPX2).

  CAD ：

  2D

  Standard Price:	684,609 IDR-
  Days to Ship:	8 Day(s) or more

Loading...