SANWA ELE INST Testers

• 

  Analog multi-tester SP-18D

  SANWA ELE INST

  Non-removable test lead type with red LED check function
  
  [Features]
  · An integrated case type, ideal for carrying and stowing away.
  · Resistance up to 200MΩ can be measured at low voltages (3 V).
  · 0.01μF to 1,000μF condenser capacity measurement.
  · Resistance measurement by LED check with 3 V terminal voltage.
  · Battery check.
  · Dual function panel screen protective cover that converts to a stand.

  • STOCK

  Standard Price:	1,653,846 IDR
  Days to Ship:	8 Day(s)

• 

  Analog multimeter (with hard case)

  SANWA ELE INST

  Analog Multi-Tester With Continuity Check Buzzer.
  [Features]
  ・ Equipped with shock-resistant tote band meter that is hard to break even if dropped
  ・ ±DCV zero center meter installed
  ・ Double protection function of fuse and diode to protect the circuit from overvoltage
  ・ 1.5 V battery check range installed
  ・ Tilt stand for visibility of meter deflection
  ・ Hard case included for easy carrying and storage
  [Applications]
  ・ Ideal for electrical work with an impact resistance meter

  Standard Price:	2,952,308 IDR
  Days to Ship:	Quote

• 

  Digital Multi Meter CD770

  SANWA ELE INST

  Multiple functions at a good price
  
  [Features]
  · 4,000 count.
  · 0.5% full accuracy.
  · Double-molded thermoplastic elastomer exterior boasts high resistance against drop shock.
  · Easy-to-read large LCD.
  · Current measuring terminal with safety cap configured separately.
  · Data hold, range hold, relative function.
  · Auto power off function after approximately 30 minutes (can be canceled).
  · Frequency measurement (zero cross signal, input resistance approximately 2 kΩ).
  · Condenser capacity measurement (not possible when there is large leakage current).

  • STOCK

  Standard Price:	2,074,286 IDR
  Days to Ship:	12 Day(s)

• 

  Digital Multi Meter RD700

  SANWA ELE INST

  Multi-functional, measures up to +AC/DC1000V/10A. 1000M Ω high input impedance.
  
  [Features]
  · 4,000 count.
  · 0.3% full accuracy.
  · Condenser capacity measurement. Note: Not suitable for measurement of condensers with large leakage current.
  · Temperature measurement (K type temperature sensor). Note: K-AD accessory required, sold separately. Note: K type temperature sensor K-250PC included.
  · Frequency measurement: Input voltage 20VACrms or less. Input signal: Sine wave or square wave with 40% to 70% duty ratio. Input sensitivity 10Hz to 20kHz: 0.9Vrms and above, 20kHz to 500kHz: 2.6Vp or 1.9Vrms and above, 500kHz to 1MHz: 4.2Vp or 3Vrms and above.
  · ADP (current sensor) dedicated function.
  · MAX recording measurement.
  · Data hold/range hold.
  · Relative value measurement.
  · Auto power off (after approximately 30 minutes) can be canceled.
  · Alarm for when test lead is improperly inserted into the current terminal.
  · Protective holster with wall hanger and test lead holder.
  · Tilt stand.

  • STOCK

  Standard Price:	3,069,231 IDR
  Days to Ship:	8 Day(s)

Loading...