(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
68.800 Stock items for Same Day Shipping
68.800 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Penghentian penjualan kategori produk pneumatik Seri Ekonomi (E-series). Info Detail
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
OSG Screw-Hole-Related Tools（Screw size (Nominal)：M2.6）
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Modification/Removal Tools
| Days to Ship |
|
|---|
-
OSG
High-speed steel hand tap.
Work material: Magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible- Volume Discount
- STOCK
Standard Price: 72,726 IDR- Days to Ship: 1 Day(s) or more -
Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT
OSG
Ideal for tapping hardened steel (alloy steel, die steel, tool steel, etc.) of 50 HRC or higher
Standard Price: 1,528,633 IDR Days to Ship: 8 Day(s) or more -
CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Standard Price: 480,101 IDR Days to Ship: 8 Day(s) or more -
Threading Round Die Series Pipe General Threading Round Die RD-H
OSG
[Specifications]
· Shape: Die
· Coating: Non-Coated
· Tool material: HSSStandard Price: 1,514,297 IDR Days to Ship: 8 Day(s) or more -
OSG
The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC
Standard Price: 262,000 IDR Days to Ship: 2 Day(s) -
Spiral Tap for Stainless Steels_EX-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
- STOCK
Standard Price: 197,391 IDR Days to Ship: 8 Day(s) or more -
Spiral Tap for General Application_EX-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
Standard Price: 143,328 IDR- Days to Ship: 2 Day(s) or more -
Spiral Tap for General Application (with OX)_EX-H-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
- STOCK
Standard Price: 179,100 IDR Days to Ship: 2 Day(s) -
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes
- STOCK
Standard Price: 204,615 IDR Days to Ship: 1 Day(s) -
Fluteless (Nu-Roll) Tap TiN coated_TIN-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
Standard Price: 301,811 IDR Days to Ship: 8 Day(s) or more -
CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Standard Price: 355,617 IDR- Days to Ship: 8 Day(s) or more -
Model A Tap Series, Pointed Tap A-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Standard Price: 339,658 IDR- Days to Ship: 8 Day(s) or more -
Spiral Tap for Stainless Steel (Water Soluble Cutting Oil-Compatible) CC-SUS-SFT
OSG
Achieves female threading of stainless steel with a water-soluble cutting fluid.
Tool Material: Vanadium high-speed steel
Hole type: For blind holes
Work material: General steel / stainless steelStandard Price: 332,362 IDR Days to Ship: 8 Day(s) or more -
Spiral Tap TiN Coating TIN-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Standard Price: 358,125 IDR Days to Ship: 8 Day(s) or more -
Spiral Tap General Purpose, Long Shank EX-LT-SFT
OSG
For standard spiral taps, it is used when the protruding length of the screw is insufficient.
Standard Price: 484,660 IDR- Days to Ship: 8 Day(s) or more -
Model A Tap Series, Spiral Tap A-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
- STOCK
Standard Price: 341,710 IDR- Days to Ship: 8 Day(s) or more -
Straight Flutes Tap for Stainless Steels_EX-SUS-HT
OSG
Suitable for stainless steel, heat resistant steel, nickel manganese steel, and others. Suitable for carbon steel and alloy steel materials.
Standard Price: 171,856 IDR Days to Ship: Same day -
Tungsten Carbide Straight Flutes Tap_OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Standard Price: 1,150,395 IDR- Days to Ship: 8 Day(s) or more -
Fluteless Tap (X Performer)_S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.Standard Price: 344,674 IDR- Days to Ship: 8 Day(s) or more -
Threading Round Die Series Pipe General Threading Round Die RD-S
OSG
[Specifications]
· Shape: Die
· Coating: Non-Coated
· Tool material: Alloy HSS (SKS)- STOCK
Standard Price: 539,710 IDR- Days to Ship: 8 Day(s) or more -
Spiral Tap with Long Shank_A-LT-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
Standard Price: 645,166 IDR Days to Ship: 8 Day(s) or more -
Spiral Tap for Stainless Steel, Deep Holes SUS-DH-SFT
OSG
Ideal for deep hole drilling of stainless steel exceeding 2D.
Work material: Stainless steel / copper / resin
Coating: Surface treatment, steam oxide treatmentStandard Price: 178,941 IDR Days to Ship: 8 Day(s) or more -
Spiral Tap for Soft Steel, Deep Holes MS-DH-SFT
OSG
Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.
- STOCK
Standard Price: 176,872 IDR Days to Ship: 8 Day(s) or more -
Pointed Tap Series TiN Coating TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Standard Price: 353,337 IDR Days to Ship: 8 Day(s) or more -
LH Spiral SYNCHRO Tap for Aluminum_HS-AL-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision female threading of aluminum and aluminum alloy.
Standard Price: 277,188 IDR Days to Ship: 8 Day(s) or more -
Pointed Tap for Stainless Steel use EX-SUS-POT
OSG
Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.
Standard Price: 191,691 IDR Days to Ship: 8 Day(s) or more -
Pointed Tap Series, General Purpose EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way
- STOCK
Standard Price: 154,388 IDR- Days to Ship: 1 Day(s) or more -
Pointed Tap for General Application (with OX)_EX-H-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
- STOCK
Standard Price: 152,176 IDR Days to Ship: 2 Day(s) -
Long Shank・General Application_EX-LT-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
Standard Price: 427,207 IDR- Days to Ship: 8 Day(s) or more -
Pointed Tap for Difficult-To-Cut Materials CPM-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Standard Price: 272,000 IDR Days to Ship: 2 Day(s) -
Pointed Tap for Thin Plate EX-SS-POT
OSG
Ideal for tapping soft steel thin plates (through holes) with a tensile strength of 700 N/mm² or less. A beautiful finished surface is obtained as the generation of punch hole and bearing hole whiskers, flashes, or chipping can be kept to a minimum
- STOCK
Standard Price: 223,538 IDR Days to Ship: 1 Day(s) -
CPM Fluteless (Nu-Roll) Tap V Coated_IT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Standard Price: 366,105 IDR Days to Ship: 8 Day(s) or more -
CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
Standard Price: 397,112 IDR Days to Ship: 8 Day(s) or more -
Fluteless (Nu-Roll) Tap for Steels_NRT
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes
Standard Price: 151,070 IDR Days to Ship: 8 Day(s) or more -
Fluteless (Hi-Roll) Tap for Non-Ferrous Metals_B-HRT
OSG
Suitable for metals such as aluminum, magnesium, zinc, and copper and non-ferrous alloys of these materials.
- STOCK
Standard Price: 204,615 IDR Days to Ship: 1 Day(s) -
Spiral Pointed Tap with Long Shank_A-LT-POT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Standard Price: 621,683 IDR Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT | CPM Fluteless (Nu-Roll) Tap V Coated with Long Shank_VP-LT-NRT | Threading Round Die Series Pipe General Threading Round Die RD-H | Spiral Tap for Stainless Steel (Water Soluble Cutting Oil-Compatible) CC-SUS-SFT | Threading Round Die Series Pipe General Threading Round Die RD-S | CPM Fluteless (Nu-Roll) Tap V coated Short Chamfer Type_VP-SC-NRT | ||||||||||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 2 Day(s) | 8 Day(s) or more | 2 Day(s) or more | 2 Day(s) | 1 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | Same day | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 1 Day(s) or more | 2 Day(s) | 8 Day(s) or more | 2 Day(s) | 1 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 1 Day(s) | 8 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||
| Screw size (Nominal) | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 | M2.6 |
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | High Hardness Steel (50-60 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] / Copper (Cu)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] |
| Pitch (P), Number of Threading(mm) | 0.35 ～ 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.35 ～ 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.35 ～ 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.35 ～ 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 |
| Tool Material Type | High-speed steel | Carbide | Powder high-speed steel | High-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Alloy HSS | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | Powder high-speed steel |
| Tap Type | Hand Tap | Hand Tap | Roll tap | Die | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Roll tap | Roll tap | Roll tap | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Hand Tap | Roll tap | Die | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Roll tap | Roll tap | Roll tap | Roll tap | Point tap |
| Hole type | For through hole / For blind hole | For through hole / For blind hole | For blind hole | - | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For blind hole | For blind hole | For blind hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole |
| Chamfer threads (Lcf) | 1.5P ～ 9P | 3P | 2P ～ 4P | - | 3P | 2.5P | 2.5P | 2.5P | 2.5P ～ 4P | 2P ～ 4P | 2P ～ 4P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 1.5P | 1.5P ～ 3P | 2P ～ 4P | - | 2.5P | 2.5P | 2.5P | 5P | 6P | 4P | 5P | 5P | 5P | 5P | 5P | 2P | 1P | 2P ～ 4P | 2.5P ～ 4P | 5P |
| Coating Type | Non-Coated | Other | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | TiCN | Other | TiN | TiN | Non-Coated | Other | Non-Coated | Non-Coated | TiCN | Non-Coated | Other | Non-Coated | Non-Coated | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN | TiCN | Non-Coated | Non-Coated | Other |
| Coating Y/N | NA | Available | Available | NA | NA | NA | NA | NA | NA | Available | Available | Available | Available | Available | NA | Available | NA | NA | Available | NA | Available | NA | NA | Available | NA | NA | NA | NA | NA | NA | NA | Available | Available | NA | NA | Available |
| Overall Length (L)(mm) | 44 | 44 | 80 | - | 44 | 44 | 44 | 44 | 44 | 44 | 44 | 44 | 44 | 44 | 80 ～ 100 | 44 ～ 46 | 44 | 44 | 44 | - | 80 | 44 | 44 | 44 | 44 | 44 | 44 | 44 | 80 ～ 100 | 44 | 44 | 44 | 44 | 44 | 44 | 80 |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No.0UN
- NO.0-80UNF
- NO.10
- No.10
- No.1UN
- No.10UN
- No.10UNF
- No.10UNJ
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- NO.4
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- No.8UNJ
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- PF1
- PT1
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1'-11
- 1-8UNC
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- PT 1 1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- PT 1 1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2UNJ
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1 3/4-8UN
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNF
- 1/4UNJ
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- M1～6
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- 1/8PT
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PS1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- M1 to 10
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- M1.1
- M1.2
- S1.2
- 1.25
- M1.4
- S1.4
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- R2
- Rp2
- W2
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- W2"1/4
- M2 to 4.5
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- G3
- M3
- M3.0
- R3
- Rp3
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PT 3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8UNF
- 3/8W
- G3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PS3/8
- PT3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- SM3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 to 10
- 3/16
- SM3/16
- W3/16
- SM3/32
- 3.5
- M3.5
- 4
- 4M
- G4
- M4
- M4.0
- R4
- Rp4
- M4 to 6
- M4 to 13
- M4.5
- 5M
- M5
- M5.0
- M5
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- M5 to 10
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNF
- 5/16UNJ
- 5/16W
- SM5/16
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5.5M
- M5.5
- 6
- M6
- M6.0
- No6-40UNF
- M6 to 20
- M7
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- 7/16UNJ
- SM7/16
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- SM7/32
- 7.5
- M8
- 9
- M9
- PG9
- 9/16
- 9/16UN
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- 9/64
- SM9/64
- M10
- M10
- M10 to 13
- M10 to 25
- M11
- PG11
- SM11/32
- SM11/64
- M12
- M12
- M13
- PG13.5
- M14
- M14.0
- M15
- SM15/64
- M16
- PG16
- M17
- M18
- M19
- M19 to 32
- M19 to 38
- M20
- M21
- PG21
- M22
- M22X
- M23
- M24
- M24X
- M25
- M25X
- M25 to 50
- M25 to 70
- M26
- M27
- M28
- PG29
- M30
- M32
- M33
- M34
- M35
- M36
- PG36
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M48
- M50
- M52
- M56
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.63
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.79
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 27
- 28
- 32
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 150
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (2)
- OSG (36)
- YAMAWA MFG (27)
- NACHI(FUJIKOSHI) (5)
- TANOI MFG (3)
- TRUSCO NAKAYAMA (3)
- ISHIHASHI (1)
- NOGA JAPAN (0)
- NS TOOL (0)
- KOKEN (0)
- NIIGATA SEIKI (SK) (0)
- NEW STRONG (0)
- SATA TOOLS (0)
- HITACHIKOKI (0)
- KO-KEN TOOL (0)
- TSUBOSAN (0)
- SKC (0)
- MITSUBISHI HITACHI TOOL (0)
- GUHRING (0)
- ENGINEER (0)
- RENNSTEIG (0)
- RUKO (0)
- UNION TOOL (0)
- ONISHI MANUFACTURING (0)
- SANDVIK (0)
- EIKOSHA (0)
- DC SWISS (0)
- ESCO (0)
- LIGHTSEIKI (0)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy