NITTO KOGYO Control Boxes（Page2）

• 

  CL-U・CL Series Box (Waterproof / Dustproof Design) / International Standard / Certified

  NITTO KOGYO

  CL-U series is a UL/TUV certified corner handle design.
  
  [Features]
  · UL/CE/TUV certified corner handle design.
  · By using galvanized steel plate, contact continuity between mounted equipment and international standard certified model (CL-U) is assured. The equipotential bonding connection is simplified.
  · The iron sheet uses a structure that is electrically connected to the body.
  · Includes rear mounting holes.
  ▪ Airtight performance equivalent to IP65.
  · The corner handle provides a strong seal with simple open/close operation and locking with a padlock is also feasible.
  · By positioning the handle on the corner of the door, the design has been simplified, allowing for greater utilization of the door surface.
  · Use of urethane foam sealing with no joints that does not readily peel provides high airtightness and maintains stability.
  · An environmentally friendly powder coating is utilized for superior durability.

  CAD ：

  2D

  Standard Price:	1,646,688 IDR-
  Days to Ship:	25 Day(s) or more

• 

  KA-A / Provisional Switchbox

  NITTO KOGYO

  KA-A series is equipped with a mounting bracket for temporary installation. Can be temporarily secured using a bolt and tie wire.
  
  [Features]
  · Equipped with a mounting bracket for temporary installation.
  · Can be temporarily secured using a bolt and tie wire.
  · Uses JIS yellow and red safety colors (for dangerous areas) (*1) Resistant to water damage from an upright position to a 60-degree tilt.
  · Do not use in areas with water driven upward (high places, etc.)

  CAD ：

  2D

  Standard Price:	2,052,500 IDR-
  Days to Ship:	26 Day(s) or more

• 

  K / Temporary Cabinet

  NITTO KOGYO

  K series is a temporary cabinet with complete functionality for improved ease of use.
  
  [Features]
  · Temporary cabinet with complete functionality for improved ease of use.
  · Includes convenient handle for carrying around.
  · Includes pull-out port for an outlet (depth: 200, or 250 mm and lateral dimension of 700mm or less), Includes temporary stowable bar.
  · Employs a locked stowed type flat handle (padlock mounting is possible).
  · Uses JIS safety colors yellow and red (used in dangerous areas).
  · Products with a lateral dimension of 600 mm or more are two-door models.

  CAD ：

  2D

  Standard Price:	4,826,708 IDR-
  Days to Ship:	26 Day(s) or more

• 

  M-B / Pull-In Instrument Panel Cabinet (with Water Repelling, Waterproof, Dust Proof Sealing) / No Roof

  NITTO KOGYO

  M-B series is an indoor/outdoor cabinet for stowing power meters. Includes water drainage with waterproof and dust proof sealing.
  
  [Features]
  · Indoor and outdoor cabinet for storing power meter.
  · Includes water drainage with waterproof and dust proof sealing.
  · Cabinet for stowing power meters compatible with all providers.
  · Grounding terminals conform to public building construction standards.
  · The meter reading window is olive colored and includes a name seal.

  CAD ：

  2D

  Standard Price:	4,796,848 IDR-
  Days to Ship:	26 Day(s) or more

• 

  OAS_OAB / Outdoor Small Box

  NITTO KOGYO

  OAS_OAB series is a small box for outdoor use which includes waterproof and dustproof sealing
  
  [Features]
  A small box for outdoor use which includes waterproof and dustproof sealing.
  · A small handle with a superior design is used (Key No. N200).
  - Internal hinge prevents tampering.
  - Models which include an iron sheet or a wooden base plate are available.

  CAD ：

  2D

  Standard Price:	1,317,339 IDR-
  Days to Ship:	8 Day(s) or more

• 

  PTM-BB / FTTH BB Plastic Box / Standard

  NITTO KOGYO

  PTM-BB series box is a plastic broadband box for compactly stowing FTTH communications equipment.
  
  [Features]
  · Plastic box exposed communications equipment in existing buildings that does not require embedding.
  · Compact storage of telecommunications equipment, optical connection boxes, HUBs, distributors, and telephone terminals for collective housing buildings or a single unit home.
  ▪ Wiring and communications equipment designed for FTTH applications can be neatly stored.
  ▪ Installation space is compact thanks to a two-unit structure.
  · Exposed model is suitable for existing buildings as there is no need to perform embedding in a wall.
  · An environmentally friendly model that utilizes biomass plastic (polylactic acid) and a styrene-based resin model are available.

  CAD ：

  2D

  Standard Price:	2,410,688 IDR
  Days to Ship:	26 Day(s) or more

• 

  PTM-NL / Plastic Box for Communication, Standard (Lattice-Shaped Body)

  NITTO KOGYO

  PTM-NL series is a standard using styrene series resin.
  
  [Features]
  • Uses a lattice-shaped body for improved equipment mounting and freedom of back surface wiring.
  · Based on wire connection tape securing method, mounting screws are not required and R shaped devices can be flexibly mounted.
  · Wiring work is simplified by the cover being single action attachable/detachable.
  • Suitable for mounting in narrow spaces.
  • Since all cover surfaces, upper and lower, and left and right, install knock-outs for exposed wiring, input and output wires can be installed from any direction.

  CAD ：

  2D

  Standard Price:	534,393 IDR-
  Days to Ship:	26 Day(s) or more

• 

  RA-Y・RA Series Control Panel Cabinet / Oblong

  NITTO KOGYO

  RA-Y series is a cabinet with a waterproof flat handle and a drainage mechanism as well as waterproof, and dust proof sealing.
  
  [Features]
  · A control panel cabinet with a waterproof flat handle and a drainage mechanism as well as waterproof, and dust proof sealing.
  · The cabinet is short and oblong for use in areas such as the spaces below production lines.
  · The door includes a stay and opens to a 95-degree angle.
  · A locking waterproof flat handle with superior functionality and design characteristics is used (Key No. N200)

  CAD ：

  2D

  Standard Price:	5,527,500 IDR-
  Days to Ship:	28 Day(s) or more

• 

  Draw-In Instrument Panel Cabinet (with Rain Deflector, Waterproof/Dustproof Sealing), Stainless Steel, SM-B Model

  NITTO KOGYO

  SM-B series instrument panel cabinet is equipped with a rain deflector and waterproof/dustproof sealing. A cabinet for stowing electricity meters for dual-purpose indoor/outdoor use.
  
  [Features]
  · Stainless steel indoor and outdoor cabinet for storing power meters.
  · Repels water, and comes with dust-proof and waterproof sealing.
  · Stainless steel is used as a material.
  · The surface has a clear coating added to a hairline finish.
  · The meter reading window is an olive color that matches the cabinet.
  · In addition, name seals are also included.

  CAD ：

  2D

  Standard Price:	11,215,788 IDR-
  Days to Ship:	10 Day(s) or more

• 

  SR-DA / Stainless Steel Outdoor Heat Resistant Control Panel Cabinet / Light Shielding Panel Included

  NITTO KOGYO

  SR-DA series cabinet inhibits internal temperature increases caused thermal radiation, such as direct sunlight.
  
  [Features]
  · The cabinet is equipped with a stainless steel light shielding panel for suppressing internal temperature increases caused by thermal radiation, such as outdoor direct sunlight.
  · A light shielding plate is provided on both side surfaces, the door surface, and the ceiling, so increases in internal pressure due to radiation heating are inhibited.
  · Features a user-friendly design with rounded corners. The light shielding panel can be simply mounted via screws.
  · The cabinet utilizes a lockable stainless steel waterproof flat handle with excellent functionality and design characteristics.
  · Stainless steel is used as a material.

  CAD ：

  2D

  Standard Price:	14,420,377 IDR
  Days to Ship:	13 Day(s) or more

• 

  SRM-N / SRM Series Stainless Steel Control Panel Cabinet

  NITTO KOGYO

  SRM-N series is a control panel cabinet that is equipped with a stainless steel window (with waterproof/dustproof sealing) and a rain deflector. SRM-N series control panel enables visual monitoring of equipment, meters, and gauges.
  
  [Features]
  · A control panel cabinet with a stainless steel window with waterproof/dustproof sealing and a rain deflector. Enables visual monitoring of equipment, meters, and gauges. Utilizes a lockable, stainless steel, waterproof flat-handle.
  · The meter panel position is changeable (20 mm pitch in the front/rear depth direction). The meter panel is equipped with a handle for convenient opening and closing.
  · The ground terminal conforms to public building construction standard specifications for ground terminals.

  CAD ：

  2D

  Standard Price:	15,450,299 IDR
  Days to Ship:	9 Day(s) or more

• 

  SR / Stainless Steel SR Series Control Panel Cabinet (with Water Repelling, Waterproof, Dust Proof Sealing)

  NITTO KOGYO

  SR series is a control panel cabinet with water drainage and waterproof and dustproof sealing. Uses a lockable waterproof flat handle.
  
  [Features]
  · A stainless steel control panel cabinet with water drainage and waterproof and dustproof sealing. Uses a lockable stainless steel, waterproof flat handle.
  · Stainless steel is used as a material.
  · Available with coating (clear coating) and without coating.

  CAD ：

  2D

  Standard Price:	6,260,918 IDR-
  Days to Ship:	9 Day(s) or more

• 

  STB_STS / Stainless Steel Base Cabinet

  NITTO KOGYO

  STB_STS is a stainless-steel base cabinet with superior corrosion resistance.
  
  [Features]
  · A stainless-steel base cabinet with superior corrosion resistance.
  · Stainless steel is used as a material.
  · The handle has a rounded, ergonomic design and also supports different key numbers.

  CAD ：

  2D

  Standard Price:	6,889,418 IDR-
  Days to Ship:	10 Day(s) or more

• 

  B-L_S-L Thermal Equipment Housing Cabinet

  NITTO KOGYO

  [Features]
  • B-L_S-L series comes with a radiation vent suitable for housing in heat generation equipment.
  · The heat releasing effect is enhanced by providing ventilation ports on 3 surfaces, both side surfaces and the door surface.
  • Stability equipment 400 W and 1000 W house up to 12 units of each.
  • Mounting of ventilation brackets is possible on body and doors.

  CAD ：

  2D

  Standard Price:	2,691,389 IDR-
  Days to Ship:	26 Day(s) or more

• 

  BF_SF / Board Cabinet / Embedded, Depth: 100 mm

  NITTO KOGYO

  BF_SF10 series represents the next step in board cabinet evolution. A wide range of needs are supported by a wide variety of models.
  
  [Features]
  · Panel cabinet that meets a wide range of needs with many different models available.
  · Superior handle function and design.
  · Wire installation is supported using a wiring support rail (mounting is possible via D160 or higher and H1000 or higher).
  ▪ With the exception of D180 all products feature excellent workability with features such as a detachable door.
  · Grounding terminals on the left and right to make grounding work easy (for horizontal dimensions of 800 mm or greater and vertical dimensions of 1,000 mm or greater)

  CAD ：

  2D

  Standard Price:	1,941,389 IDR-
  Days to Ship:	26 Day(s) or more

• 

  BF_SF / Board Cabinet, Embedded, Depth: 120 mm

  NITTO KOGYO

  BF_SF12 series is a board cabinet in pursuit of evolution. Wide variety of models supports a wide range of needs.
  
  [Features]
  · Handle function and design are superior.
  · Wire installation is possible using a wiring support rail (mounting is possible at D160 or higher and H1000 or higher) * Excluding D180.
  · Excellent construction because the door can be removed.
  · There are grounding terminals left and right to make grounding work easy (targets a horizontal dimension of 800 mm and a vertical dimension of 1,000 mm).

  CAD ：

  2D

  Standard Price:	2,080,278 IDR-
  Days to Ship:	26 Day(s) or more

• 

  BF_SF / Board Cabinet / Embedded, Depth: 160 mm

  NITTO KOGYO

  BF_SF16 series is a highly advanced board cabinet. A wide range of needs are supported by a wide variety of models.

  CAD ：

  2D

  Standard Price:	2,496,944 IDR-
  Days to Ship:	26 Day(s) or more

• 

  BF_SF / Board Cabinet / Embedded, Depth: 180 mm

  NITTO KOGYO

  BF_SF18 series is a highly advanced board cabinet. A wide range of needs are supported by a wide variety of models.

  CAD ：

  2D

  Standard Price:	5,072,389 IDR-
  Days to Ship:	26 Day(s) or more

• 

  B_S / Board Cabinet / Exposed, Depth: 160 mm

  NITTO KOGYO

  B_S16 series is a highly advanced board cabinet. A wide range of needs are supported by a wide variety of models.

  CAD ：

  2D

  Standard Price:	2,358,056 IDR-
  Days to Ship:	24 Day(s) or more

• 

  MB-A_MBK-A / Cosmetics Box

  NITTO KOGYO

  MB-A_MBK-A series is suitable for apartments, luxury apartments, offices, stores, and ordinary residences that use power meters.
  
  [Features]
  · Suitable for apartments, luxury apartments, offices, stores, and ordinary residences that use power meters.
  · Sealing is supported.
  · A AA window frame is included with the MBK-131A and MB-132A while a 30A window frame is included with the MB-133A, 331A and 332A.
  · Select a weatherproof WHM for outdoor applications.

  CAD ：

  2D

  Standard Price:	524,895 IDR-
  Days to Ship:	26 Day(s) or more

• 

  OR_ORB / Outdoor Control Panel Cabinet Depth: 250 mm

  NITTO KOGYO

  OR_ORB25 series is an outdoor use control panel cabinet with drainage, waterproofing, and dust proof sealing.

  CAD ：

  2D

  Standard Price:	7,151,847 IDR-
  Days to Ship:	25 Day(s) or more

• 

  OW-A / Window Cabinet / with Roof

  NITTO KOGYO

  OW-A series is a large windowed cabinet with a drainage mechanism and waterproof and dust proof sealing.
  
  [Features]
  · A large windowed cabinet and drain mechanism as well as waterproof and dust proof sealing.
  · Provided with a large window enabling viewing of inside the cabinet.
  · There are no protrusions from the door surface, so the appearance is clean.
  · Can be locked using a padlock.
  · A catch clip is used for opening and closing the door.

  CAD ：

  2D

  Standard Price:	6,570,418 IDR-
  Days to Ship:	25 Day(s) or more

• 

  RAM-A・RAM Series Control Panel Cabinet

  NITTO KOGYO

  RAM-A series is a control panel cabinet that is equipped with a window (with waterproof/dustproof sealing) and a rain deflector. SRM-N series control panel enables visual monitoring of equipment, meters, and gauges.
  
  [Features]
  · A control panel cabinet that is equipped with a window as well as waterproof/dustproof sealing and a rain deflector.
  · Enables visual monitoring of equipment, meters, and gauges.
  · Utilizes a lockable, waterproof flat-handle.
  · The meter panel position is changeable (20 mm pitch in the front/rear depth direction). The meter panel is equipped with a handle for convenient opening and closing.

  CAD ：

  2D

  Standard Price:	6,638,611 IDR
  Days to Ship:	25 Day(s) or more

• 

  RA・RA Series Control Panel Cabinet Depth: 250 mm

  NITTO KOGYO

  RA25 series is an outdoor use control panel cabinet with drainage, waterproofing, and dust proof sealing.

  CAD ：

  2D

  Standard Price:	5,690,968 IDR-
  Days to Ship:	12 Day(s) or more

• 

  SCL / SCL Series Stainless Steel Box

  NITTO KOGYO

  SCL series is a corner handle design, high sealant stainless steel cabinet
  
  [Features]
  · Material properties include mirror-finish stainless steel (SUS 304).
  ▪ High-airtight IP65.
  · The body corner parts are fully welded.
  · The corner handle provides a strong seal with a simple open/close operation; locks with a padlock.
  • The handle is positioned in the door corner, for a clean design that expands the usage range of the door surface.

  CAD ：

  2D

  Standard Price:	3,666,385 IDR-
  Days to Ship:	24 Day(s) or more

• 

  SMS-B / Stainless Steel Draw-In Instrument Panel Cabinet (with Rain Deflector, Waterproof/Dustproof Sealing)

  NITTO KOGYO

  SMS-B series instrument panel cabinet is equipped with a drain mechanism and waterproof/dustproof sealing. A cabinet for stowing electricity meters both indoors and outdoors.
  
  [Features]
  · Stainless steel indoor and outdoor cabinet for storing a power meter.
  · Repels water, and comes with dust-proof and waterproof sealing.
  · Cabinet for stowing power a meter compatible with any power jurisdiction.
  · Includes switch mount.
  · Stainless steel (SUS 304) is used as a material.
  · The surface features a clear coat on a hairline finish.
  · The grounding terminals are compliant with public building construction standard specifications.
  · The meter reading window is olive colored and includes a name seal.

  CAD ：

  2D

  Standard Price:	18,296,761 IDR
  Days to Ship:	10 Day(s) or more

• 

  SOM-B / Stainless Steel Draw-In Instrument Panel Cabinet (with Rain Deflector, Waterproof/Dustproof Sealing)

  NITTO KOGYO

  SOM-B series instrument panel cabinet is equipped with a drain mechanism and waterproof/dustproof sealing. A superior corrosion-resistant, stainless steel cabinet.
  
  [Features]
  · A stainless steel, indoor/outdoor cabinet for stowing electricity meters.
  · Includes a drain mechanism, and comes with dust-proof and waterproof sealing.
  · Cabinet for stowing power meters used by various power companies.
  · Stainless steel is used as a material.
  · A light beige paint is used to coat the stainless steel to prevent rust stains.
  · Mounting of individual 200A electricity meters is supported.
  · Mounting of crimp terminal 120A electricity meters is also supported.
  · Grounding terminals are compliant with public building construction standards.
  · The meter reading window is olive colored and includes a name seal.

  CAD ：

  2D

  Standard Price:	12,032,329 IDR-
  Days to Ship:	10 Day(s) or more

• 

  Cabinet Compliant with FUL Machinery Safety Standards (Includes Door-Locking Nut)

  NITTO KOGYO

  [Features]
  - TÜV/CE/UL certified.
  - Cabinet for FA machinery that factors in mechanical safety.
  - Handle with key and door fixing screws (M5, up/down) makes it difficult for it to be unlocked by those outside.
  · By using a base plate made of galvanized steel sheet, conductivity can be ensured via contact with mounted equipment, so therefore paint removal is not necessary, and establishment of an equipotential bonding connection is simple.
  · The iron sheet uses a structure that is electrically connected to the body.
  - Because it incorporates 24 (M4~M10) grounding terminals, connection is also possible even when there are multiple input power supplies.
  - Optional iron sheet enables a variety of layouts and substantial space-savings.
  - Installation of the handle on the exterior from the body aperture expands usable range on the plate surface.
  · Dust intrusion is prevented to avoid a potential buildup of internal negative pressure.

  CAD ：

  2D

  Standard Price:	11,088,672 IDR-
  Days to Ship:	30 Day(s) or more

Loading...