NAKANISHI Micro Grinders (Electric)（Product Type：Main Body）

• 

  Ultraprecision Brushless Micro Grinder Expert 500 Compact Motor

  NAKANISHI

  Microcomputer control provides optimal control of the motor. Equipped with an ON/OFF switch function.

  Standard Price:	9,008,900 IDR
  Days to Ship:	8 Day(s) or more

• 

  Rubber Mounted Point High Shine Polisher Shaft Diameter ø3.0

  NAKANISHI

  [Features]
  · WA abrasive grains (white alumina oxide abrasive grains / white alundum) are suitable for general steel materials, including high-speed steel, alloy steel, thick tools, hardened steel, stainless steel, etc.
  · GC abrasive grains (green silicon carbide, green carborundum) are suitable for carbide alloy, glass, titanium alloy, special steel, etc.

  • STOCK

  Standard Price:	497,385 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Ring type attachment collet for micro grinder

  NAKANISHI

  [Features]
  · The feel of the grip is designed for easy holding.
  · Ring type chucking allows easy and secure one-touch replacement.
  · Supports a wide range of machining situations from roughing to precision and fine finishing.

  Standard Price:	4,622,658 IDR
  Days to Ship:	8 Day(s) or more

• 

  Electrodeposited Diamond Bur / CBN Bur Shaft Diameter ø3.0

  NAKANISHI

  [Features]
  · Suitable for a wide range of processes, from precision polishing to deburring and carving.
  · Can be used for a wide variety of applications, from precision grinding of electronic parts, machine parts, jigs, bicycle parts, molds, etc. to internal grinding and jig grinding.
  · Good sharpness that can minimize grinding burn and distortion due to heat under low frequency conditions or when dry-cutting.

  Standard Price:	256,923 IDR-
  Days to Ship:	1 Day(s) or more

• 

  Various Types Of Brush Nylon Brush With Diamond Abrasive Grains Wire Diameter (0.2 to 0.5 mm)

  NAKANISHI

  [Features]
  · Chemical fiber brush with superior flexibility, elasticity and abrasion resistance. More uniform than animal fiber, it has no wettability and does not extract impurities.
  · Durable against alkalis and common solvents (alcohol, benzene, toluene, machine oil, etc.)
  · Melting point is 120°C (420°C), but the continuous service temperature limit is 100°C (210°C). Temperature in brackets is for heat-resistant brushes.

  Standard Price:	335,385 IDR-
  Days to Ship:	12 Day(s)

• 

  Ring Type Attachment

  NAKANISHI

  [Features]
  · Provides high precision and high reliability by combining micron technologies.
  · Slim and lightweight, making it ideal for fine finish processing.
  · The ring-type chucking allows for secure single-action tool exchange.
  

  Standard Price:	6,577,112 IDR
  Days to Ship:	15 Day(s) or more

• 

  Diamond Drill (Twist Type) Cutting Diameter 0.8 to 1.5 mm

  NAKANISHI

  Nakanishi Micro Grinder (Electric) Electroplated Diamond Bur/CBN Bar Electroplated Diamond Drill (Twist Type) Shaft Diameter ⌀2.34.

  Standard Price:	471,231 IDR
  Days to Ship:	12 Day(s)

• 

  Carbide Cutter For Reverse Rotation Carbide Cutter Shaft Diameter ø3.0

  NAKANISHI

  [Features]
  · Can be used for a wide range of machining, from heavy cutting to finish cutting, chamfering, various types of deburring, etc.
  · Uses a grinder that can rotate left and right, so machining is possible from any direction.
  · The up/down cut can be changed without changing the position of the main shaft.
  · High-level cutting technology allows the cutting of carefully selected high-quality cemented carbide materials.

  Standard Price:	425,481 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Espert 500 Controller

  NAKANISHI

  [Features]
  · The built-in microcomputer provides optimal control, allowing for smoother, more precise cutting and polishing.
  · While working with the foot pedal, the auto cruise function can be set to a constant rotation speed.
  · Whichever is pressed first among the switch on the front of the controller, the hand switch and the foot pedal has priority, so the trouble of switching has been eliminated.
  · Equipped with FiXpeed, which can preset rotation speeds in advance.
  · Carrying handle makes it convenient to carry, giving it superior mobility and making it ideal for machining on-site.
  · The electronic circuit is an eco-design that minimizes power consumption, reducing power loss and eliminating the fan for heat dissipation.
  · Equipped with a function to display error codes.
  

  Standard Price:	12,036,161 IDR
  Days to Ship:	15 Day(s) or more

• 

  90° Equal Angle Steel Attachment EIC-300

  NAKANISHI

  [Features]
  · Ideal for speedy polishing of flat surfaces using a polishing disk pad.
  · Can be used for a wide range of machining, from rough machining to mirror finishing.
  · The built-in gear reduces speed by 3/4.
  

  Standard Price:	7,692,307 IDR
  Days to Ship:	12 Day(s)

• 

  90° Equal Angle Steel Attachment IC-300

  NAKANISHI

  [Features]
  · A polishing disc pad ideal for flat surface speed polishing.
  · Capable of extensive machining from roughing to mirror finishing.

  Standard Price:	4,978,000 IDR
  Days to Ship:	12 Day(s)

• 

  50° Equal Angle Steel Attachment KC-300

  NAKANISHI

  [Features]
  · Convenient for machining bottom corners using a shafted tool.
  · Achieves 3/4 deceleration with built-in gear. Rotates in the opposite direction of the motor rotation.

  Standard Price:	4,978,000 IDR
  Days to Ship:	12 Day(s)

• 

  Fine Belt Sander, Attachment, KBS-101

  NAKANISHI

  [Features]
  · Belt angle can be freely adjusted and belts can be replaced with one touch.
  · The belt travel speed is steplessly variable.

  Standard Price:	8,314,445 IDR
  Days to Ship:	8 Day(s) or more

• 

  6 mm Attachment

  NAKANISHI

  [Features]
  · Can use a shaft diameter 6 mm tip tool.
  · The rubber clip cover is soft on the hands and prevents slipping.
  · Tool replacement is performed by tightening with a wrench and secure chucking is possible.

  Standard Price:	6,001,538 IDR
  Days to Ship:	12 Day(s)

• 

  Raster Attachment

  NAKANISHI

  [Features]
  · Its high power and large stroke make highly efficient machining possible.
  · Rubber grip is easy to hold and reduces vibration.
  · Can be used for work from various filing to lapping mirror finishing.

  Standard Price:	14,129,107 IDR
  Days to Ship:	8 Day(s) or more

• 

  Electrocoated Diamond Bar / CBN Bar (Miniature Type) Shaft Diameter φ2.34

  NAKANISHI

  [Features]
  · Suitable for a wide range of machining from precision grinding to deburring and engraving.
  · The shaft diameter φ2.34 series has a small diameter and is available in a variety of shapes for fine machining.

  Standard Price:	217,693 IDR
  Days to Ship:	12 Day(s)

• 

  Electrocoated Diamond Bar Shaft Diameter φ2.34

  NAKANISHI

  [Features]
  · Suitable for a wide range of machining from precision grinding to deburring and engraving.
  · The shaft diameter φ2.34 series has a small diameter and is available in a variety of shapes for fine machining.

  Standard Price:	513,077 IDR
  Days to Ship:	12 Day(s)

• 

  Electrocoated Diamond Bar / CBN Bar Shaft Diameter φ3.0

  NAKANISHI

  [Features]
  · Suitable for a wide range of machining from precision grinding to deburring and engraving.
  · It can be widely used for anything from precision grinding of electronic parts, machine parts, jigs, bicycle parts, molds and the like to internal grinding and jig grinding.
  · Features excellent sharpness and can minimize distortion due to grinding burns or heat even under conditions of low frequency or dry grinding.

  Standard Price:	280,000 IDR
  Days to Ship:	12 Day(s)

• 

  Electrocoated Diamond Bar / CBN Bar Carbide Shaft Diameter φ3.0

  NAKANISHI

  [Features]
  · As it is highly rigid, it minimizes clearance when machining and enables more precise machining.
  · For polish finishing carbide shafts with runout accuracy within 5 μm.
  · Significantly increased work efficiency with high rigidity 3 times or more that of stainless steel shafts.
  · Greatly improves the efficiency of internal grinding accuracy for anything from precision machine parts to jigs, electronic parts, precision molds, etc.

  Standard Price:	932,616 IDR
  Days to Ship:	12 Day(s)

• 

  Electrodeposited Diamond Bur / CBN Bur For Deep Holes Long Shaft Type 1270

  NAKANISHI

  [Features]
  · A long-shaft type that is ideal for deep hole and groove machining and a short-top type with a short electrodeposited portion are both available.
  · Electrodeposited bonding (affixing of abrasive grains through plating) provides superior grinding power due to the highly concentrated abrasive grains with large protrusions.

  Standard Price:	326,462 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Electrodeposited Diamond Bur / CBN Bur Shaft Diameter ø6.0

  NAKANISHI

  [Features]
  · Suitable for a wide range of processes, from precision polishing to deburring and carving.
  · Can be used for a wide variety of applications, from precision grinding of electronic parts, machine parts, jigs, bicycle parts, molds, etc. to internal grinding and jig grinding.
  · Electrodeposited bonding (affixing of abrasive grains through plating) provides superior grinding power due to the highly concentrated abrasive grains with a large amount of protrusion.

  Standard Price:	360,667 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond Cutting Disk Diamond Bur Shaft Diameter ø2.34, ø3.0

  NAKANISHI

  [Features]
  · Lineup of various sizes, including an ultra-thin type (thickness of 0.13 mm) and disks of diameters ø8 to ø45 mm, etc. Select the product suitable for your application.
  · Electrodeposited bonding (affixing of abrasive grains through plating) provides superior grinding power due to the highly concentrated abrasive grains with a large amount of protrusion.
  · Cutting disks made using electrodeposition have high dimensional precision, and a uniform abrasive grain layer is formed, which provides a good cut surface finish.

  Standard Price:	652,770 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Diamond/CBN Grinding Point, Diamond/CBN Bur, Ceramic Bonded, Shaft Diameter ø3.0

  NAKANISHI

  [Features]
  · Made using the latest ceramic bond, this new diamond grinding point combines sharpness and durability.
  · Unlike resin- and metal-bonded diamonds, this has pores and abrasive grain protrusions for superior grindability.
  · Provides a soft grinding touch like a GC grindstone.

  Standard Price:	264,154 IDR-
  Days to Ship:	12 Day(s)

• 

  Diamond/CBN Grinding Point, Diamond/CBN Bur, Resinoid Bond For Precision Internal Surface Grinding and Jig Grinding, Shaft Diameter ø3.0

  NAKANISHI

  [Features]
  · Made with a flexible resin bond, allowing for easy handling with superior usability.
  · Even dry grinding barely causes any burning. Makes high performance grinding possible.
  · The appropriate wear of the bond allows for smooth autogenetic actions, and since there is no reactivity with the metal being cut, there is little clogging and superior overall grindability.

  Standard Price:	901,693 IDR-
  Days to Ship:	12 Day(s)

• 

  Miniature Carbide Cutter Shaft Diameter φ1.6

  NAKANISHI

  [Features]
  · A small diameter and short shank miniature carbide cutter, ideal for precision cutting processing and cutting fine areas.
  · Because its full length is 19 mm and its weight just 1 g, the lightest pressure on this cutter allows the worker's most subtle touch to be transferred to the workpiece for carefully executed minute processing.
  · Miniature, sharp Single Cut with chip breaker ejects fine cutting chips.

  Standard Price:	1,126,924 IDR
  Days to Ship:	12 Day(s)

• 

  Carbide Cutter Single Cut Shaft Diameter φ3.0

  NAKANISHI

  [Features]
  · Usable for a wide range of machining from heavy cutting to finish cutting, chamfering, various deburring, and so on.
  · Blades are attached to carefully selected high-quality carbide material with advanced cutting technology.
  · The latest cutting technology provides a high-strength cutting edge that does not chip easily and contributes to improved tool durability.
  · Blade shape as well as single/double cut can be selected according to workpieces.

  Standard Price:	357,693 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Carbide Cutter Shaft Diameter ø6.0

  NAKANISHI

  [Features]
  · Can be used for a wide range of machining, from heavy cutting to finish cutting, chamfering, various types of deburring, etc.
  · High-level cutting technology allows the cutting of carefully selected high-quality cemented carbide materials.
  · The chip pocket is set relatively shallow thanks to the latest cutting technology. This means that the strength of the blade tip is enhanced, which reduces chipping and improves the durability of the tool.

  Standard Price:	606,308 IDR-
  Days to Ship:	12 Day(s)

• 

  Precision Steel Cutter Shaft Diameter φ3.0

  NAKANISHI

  [Features]
  · Can be used for a wide variety of processing including fine cutting, engraving, chamfering, and deburring.
  · For many years the most widely used product for jewelry (precious metal) working.
  · There are many blade shapes and each has their own use; thus we recommend preparing a wide variety of blades to best suit the task.
  · Has excellent cost performance as it is made of steel.

  Standard Price:	392,308 IDR-
  Days to Ship:	12 Day(s)

• 

  Precision Steel Cutter Tapered Type Shaft Diameter ø2.34

  NAKANISHI

  [Features]
  · Can be used for a wide range of machining, including micro-cutting, engraving, chamfering and deburring.
  · For a long time this tool has mostly been used for jewelry (precious metals) crafting.
  · Since there are many blade shapes, each with its own application, we recommend using a variety of blades.
  · Made of steel for superior cost performance.

  Standard Price:	317,077 IDR-
  Days to Ship:	12 Day(s)

• 

  Precision Steel Cutter Sawblade

  NAKANISHI

  [Features]
  · Can be used for a wide range of machining, including micro-cutting, engraving, chamfering and deburring.
  · For a long time this tool has mostly been used for jewelry (precious metals) crafting.
  · Since there are many blade shapes, each with its own application, we recommend using a variety of blades.
  · Made of steel for superior cost performance.

  Standard Price:	621,847 IDR
  Days to Ship:	12 Day(s)

• 

  Precision Steel Cutter Plastic/Acrylic for Cutting Out Shaft Diameter φ3.0

  NAKANISHI

  [Features]
  · Can be used for a wide variety of processing including fine cutting, engraving, chamfering, and deburring.
  · For many years the most widely used product for jewelry (precious metal) working.
  · There are many blade shapes and each has their own use; thus we recommend preparing a wide variety of blades to best suit the task.
  · Has excellent cost performance as it is made of steel.

  Standard Price:	1,834,308 IDR
  Days to Ship:	12 Day(s)

• 

  Mandrel Shaft Diameter φ2.34

  NAKANISHI

  [Features]
  A dedicated rotating shaft for using various wheels and discs.

  Standard Price:	699,539 IDR-
  Days to Ship:	12 Day(s)

• 

  Mounted Point Shaft Diameter ø2.34

  NAKANISHI

  [Features]
  · Miniature mounted point with a small diameter and short shaft that is ideal for a wide range of machining, including micro-cutting, engraving, chamfering and deburring.
  · The miniature mounted point is lightweight with a short total length of 21 mm. The feel of the cutting is transmitted to the fingertips, enabling fine machining.
  · Because it uses high quality abrasive grains, this mounted point has superior cutting power and is easy to use.

  Standard Price:	419,539 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Rubber Mounted Point Green Polisher Shaft Diameter ø3.0

  NAKANISHI

  [Features]
  · WA abrasive grains (white alumina oxide abrasive grains / white alundum) are suitable for general steel materials, including high-speed steel, alloy steel, thick tools, hardened steel, stainless steel, etc.
  · GC abrasive grains (green silicon carbide, green carborundum) are suitable for carbide alloy, glass, titanium alloy, special steel, etc.

  Standard Price:	466,000 IDR-
  Days to Ship:	12 Day(s)

• 

  Rubber Mounted Point Long Power Polisher Shaft Diameter ø3.0

  NAKANISHI

  [Features]
  · WA abrasive grains (white alumina oxide abrasive grains / white alundum) are suitable for general steel materials, including high-speed steel, alloy steel, thick tools, hardened steel, stainless steel, etc.
  · GC abrasive grains (green silicon carbide, green carborundum) are suitable for carbide alloy, glass, titanium alloy, special steel, etc.

  Standard Price:	575,077 IDR-
  Days to Ship:	12 Day(s) or more

• 

  Various Types Of Brush, Shaft Diameter ø2.34, ø3.0 Hair Brush

  NAKANISHI

  [Features]
  · Various natural hair brushes made only from carefully selected animal fibers with superior flexibility and elasticity.
  · Lightly chemical resistant, doesn't generate static electricity, this brush also has superior durability due to the strong resilience and doesn't break easily.
  · Can be used with various polish compounds and diamond compounds, making it ideal for abrasive machining.

  Standard Price:	420,579 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Inside Brush Shaft Diameter ø3.0

  NAKANISHI

  [Features]
  · Special brush made up of various brush materials fixed in a spiral shape by metal wires. Standard length 70 mm, long type length 100 mm.
  · Makes it possible to finish machining of parts that cannot be finished with regular brushes, such as cylinder inner surfaces, screw hole inner surfaces, pipe inner diameters, etc.
  · Suitable for polishing, deburring, cleaning, rust removal and scale removal.

  Standard Price:	219,779 IDR-
  Days to Ship:	8 Day(s) or more

• 

  Felt Buff Diameter ø2.34

  NAKANISHI

  [Features]
  · Felt buff that absorbs polishing solution well for a high-quality finish.
  · This product is made from high-quality compressed wool (100%) and the outer shape is carefully finished by cutting.
  · Has appropriate permeability for abrasives and abrasive grains, and can constantly preserve the state of free abrasive grains.

  Standard Price:	730,462 IDR
  Days to Ship:	12 Day(s)

• 

  Lever Type Attachment IH-300

  NAKANISHI

  [Features]
  · Provides high precision and high reliability by combining micron technologies.
  · Slim and lightweight, making it ideal for fine finish processing.
  · Lever-type chucking allows for secure single-action tool exchange.
  

  Standard Price:	4,150,812 IDR
  Days to Ship:	8 Day(s) or more

• 

  Deceleration Device For Emax EVOlution

  NAKANISHI

  [Features]
  · Connects between an attachment and motor.
  [Applications]
  · For low-speed high-torque polishing and drilling.
  

  Standard Price:	5,279,572 IDR
  Days to Ship:	12 Day(s) or more

• 

  Foot Controller For Emax EVOlution

  NAKANISHI

  [Features]
  It is a foot controller that allows you to change the rotational speed with your feet, and you can also turn it on/off and adjust the rotational speed with your feet.

  Standard Price:	1,546,359 IDR
  Days to Ship:	8 Day(s) or more

• 

  Intermediate Clamp Joint (Extension Joint)

  NAKANISHI

  [Features]
  · 1:1 constant velocity.
  · When mounting a grinder, etc. to other equipment, this joint connects the attachment and the motor and clamps (fixes) the whole thing.
  · Convenient joint that allows you to fix a grinder in place and use it as a drilling or cutting machine, etc.
  · Also ideal for use as an extender to make the body longer.
  

  Standard Price:	3,700,365 IDR
  Days to Ship:	16 Day(s) or more

• 

  Mini Raster Attachment (Handpiece)

  NAKANISHI

  [Features]
  · The high-speed vibrations make fast polishing of micro-parts possible.
  · Lightweight pencil type that prides itself on ease of use.
  · Ideal for micro-parts, narrow parts, rib grooves, etc.
  · Pencil-type precision polisher.
  

  Standard Price:	9,170,883 IDR
  Days to Ship:	26 Day(s) or more

Loading...